Set-CMTSStepOfflineEnableBitLocker

參考

模組:: ConfigurationManager

設定 預先布建 BitLocker 任務順序步驟的實例。

Syntax

Set-CMTSStepOfflineEnableBitLocker
   [-Disk <Int32>]
   [-Drive <String>]
   [-EnableSkipWhenTpmInvalid <Boolean>]
   [-EncryptionMethod <DiskEncryptionMethod>]
   [-NextPartition]
   [-Partition <Int32>]
   [-VariableName <String>]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   -InputObject <IResultObject>
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-Disk <Int32>]
   [-Drive <String>]
   [-EnableSkipWhenTpmInvalid <Boolean>]
   [-EncryptionMethod <DiskEncryptionMethod>]
   [-NextPartition]
   [-Partition <Int32>]
   [-VariableName <String>]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-Disk <Int32>]
   [-Drive <String>]
   [-EnableSkipWhenTpmInvalid <Boolean>]
   [-EncryptionMethod <DiskEncryptionMethod>]
   [-NextPartition]
   [-Partition <Int32>]
   [-VariableName <String>]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-Condition <IResultObject[]>]
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-Condition <IResultObject[]>]
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-Condition <IResultObject[]>]
   -InputObject <IResultObject>
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   -InputObject <IResultObject>
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   [-SetConditionFile]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   [-SetConditionFile]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   -InputObject <IResultObject>
   [-SetConditionFile]
   [-StepName <String>]
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   [-SetConditionFolder]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   [-SetConditionFolder]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   -InputObject <IResultObject>
   [-SetConditionFolder]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   -InputObject <IResultObject>
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   -InputObject <IResultObject>
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   -InputObject <IResultObject>
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   -InputObject <IResultObject>
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepOfflineEnableBitLocker
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

使用此 Cmdlet 來設定 預先布建 BitLocker 任務順序步驟的實例。

如需此步驟的詳細資訊，請參閱關於任務順序的步驟：預先布建 BitLocker。

注意

從 Configuration Manager 網站磁碟機執行 Configuration Manager Cmdlet，例如 PS XYZ:\> 。如需詳細資訊，請參閱快速入門。

範例

範例 1

這則範例會將預設 OS 部署工作順序中的預先布建 BitLocker步驟變更為使用特定磁片及分割區編號，並將邏輯磁片磁碟機號儲存為變數。

$tsNameOsd = "Default OS deployment"
$tsStepNamePreProvBitLocker = "Pre-provision BitLocker"

Set-CMTSStepOfflineEnableBitLocker -TaskSequenceName $tsNameOsd -StepName $tsStepNamePreProvBitLocker -Disk 1 -Partition 2 -VariableName "BitLockerDrive"

參數

-AddCondition

指定要新增至此步驟的 condition 物件。若要取得此物件，請使用其中一個工作順序條件 Cmdlet。例如， CMTSStepConditionVariable。

Type:	IResultObject[]
Aliases:	AddConditions
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ClearCondition

移除此步驟中的條件。使用 -Condition 參數可指定要移除的條件。

Type:	SwitchParameter
Aliases:	ClearConditions
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ConditionVariableName

指定要用來做為條件的任務順序變數名稱。

Type:	String
Aliases:	Variable
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ConditionVariableValue

指定要在條件中使用之任務順序變數的值。

Type:	String
Aliases:	Value
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-Confirm

執行 Cmdlet 之前提示您確認。

Type:	SwitchParameter
Aliases:	cf
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-Description

指定此任務順序步驟的選用描述。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-DisableWildcardHandling

此參數會將萬用字元視為常值字元值。您無法將它與 ForceWildcardHandling合併。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-EnableSkipWhenTpmInvalid

將此參數設定為 true 若電腦未安裝 tpm 或未啟用 tpm，請略過此步驟。

Type:	Boolean
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-EncryptionMethod

適用于版本2006和更新版本。使用此參數可指定磁片加密模式。依預設，或如果未指定，該步驟會繼續使用 OS 版本的預設加密方法。

Type:	DiskEncryptionMethod
Aliases:	DiskEncryptionMethod
Accepted values:	DoNotSpecify, AES_128, AES_256, XTS_AES128, XTS_AES256, TotalCount
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FileDateTimeOperator

指定 file date/time 條件的變數運算子類型。

Type:	VariableOperatorType
Accepted values:	Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FilePath

指定檔條件的路徑。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FileTimestamp

指定要用於檔條件的日期/時間值。

Type:	DateTime
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FileVersion

指定檔狀況的版本字串。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FolderDateTimeOperator

指定資料夾日期/時間條件的變數運算子類型。

Type:	VariableOperatorType
Accepted values:	Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FolderPath

指定資料夾條件的路徑。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FolderTimestamp

指定用於資料夾條件的日期/時間值。

Type:	DateTime
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ForceWildcardHandling

這個參數會處理萬用字元，而且可能會造成未預期的行為 (不建議) 。您無法將它與 DisableWildcardHandling合併。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-InputObject

指定要從中取得 預先布建 BitLocker 步驟的任務順序物件。若要取得此物件，請使用 CMTaskSequence Cmdlet。

Type:	IResultObject
Aliases:	TaskSequence
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-IsAnyVersion

使用此參數搭配 SetConditionSoftware 參數，可比對任何版本的產品。

Type:	Boolean
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-IsContinueOnError

使用此參數可啟用 [步驟] 選項 [ 在錯誤時繼續] 選項。當您啟用此選項時，任務順序會繼續執行。

Type:	Boolean
Aliases:	IsThisStepContinueOnError
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-IsEnabled

使用此參數可啟用此任務序列步驟。

Type:	Boolean
Aliases:	IsThisStepEnabled
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-MoveToIndex

將此步驟移至任務順序中指定的索引位置。

Type:	Int32
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-MsiFilePath

指定軟體條件 Windows 安裝程式檔案的路徑。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-NewStepName

使用此參數可重新命名此任務序列步驟。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-NextPartition

新增此參數可將 BitLocker 設定為套用至下一個可用的格式化磁碟分割。

Type:	SwitchParameter
Aliases:	UseNextAvailableFormattedPartition
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-OperatorType

指定與任務順序可變條件搭配使用的運算子。

Type:	VariableOperatorType
Accepted values:	Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-Query

指定用於條件的 WMI 查詢字串。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RegistryKey

指定要搭配登錄條件使用的機碼。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RegistryOperator

指定要搭配登錄條件使用的運算子。

Type:	VariableOperatorType
Accepted values:	Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RegistryValueData

指定要搭配登錄條件使用的數值資料。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RegistryValueName

指定要搭配登錄條件使用的值名稱。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionFile

使用此參數可移除檔狀況。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionFolder

使用此參數可移除資料夾條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionIfStatement

使用此參數可移除 if 語句條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionOperatingSystem

使用此參數可移除作業系統條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionQueryWmi

使用此參數可移除 WMI 查詢準則。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionRegistry

使用此參數可移除登錄條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionSoftware

使用此參數可移除軟體條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionVariable

使用此參數可移除任務順序變數條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RootKey

指定登錄條件所使用的根機碼。

Type:	RegistryRootKeyType
Accepted values:	HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionFile

新增檔條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionFolder

新增資料夾條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionIfStatement

新增 if 語句條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionOperatingSystem

新增作業系統條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionQueryWmi

新增 WMI 查詢準則。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionRegistry

新增登錄條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionSoftware

新增軟體條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionVariable

新增任務順序變數條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-StatementType

設定語句條件的類型 if 。

Type:	ConditionStatementType
Aliases:	Operator
Accepted values:	All, Any, None
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-StepName

指定變更的選取步驟名稱。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-StepOrder

使用此參數可重新排序任務順序中的步驟。

Type:	ReorderType
Accepted values:	MoveUp, MoveDown, MoveToIndex
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SupportedPlatform

使用此參數可指定作業系統條件的平臺。

Type:	IResultObject[]
Aliases:	SupportedPlatforms
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-TaskSequenceId

指定變更目標的任務序列識別碼。

Type:	String
Aliases:	Id, TaskSequencePackageId
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-TaskSequenceName

指定變更目標的任務序列名稱。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ValueType

指定登錄條件的數值型別。

Type:	RegistryValueType
Accepted values:	RegistrySZ, RegistryExpandSZ, RegistryDWord
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-VariableName

指定任務順序變數，以識別邏輯磁碟機號做為 BitLocker 的目的地。

Type:	String
Aliases:	DestinationVariable
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-VersionOperator

指定要搭配檔條件使用的運算子。

Type:	VariableOperatorType
Accepted values:	Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-WhatIf

顯示執行 Cmdlet 時會發生什麼情況。它不會執行 Cmdlet。

Type:	SwitchParameter
Aliases:	wi
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-分割區

指定要加密的特定分割區號碼。請搭配 -Disk 參數使用此參數。

Type:	Int32
Aliases:	DestinationPartition
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-命名空間

指定 WMI 查詢準則的命名空間。

Type:	String[]
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-條件

指定要與此步驟搭配使用的 condition 物件。若要取得此物件，請使用其中一個工作順序條件 Cmdlet。例如， CMTSStepConditionVariable。

Type:	IResultObject[]
Aliases:	SubCondition, SubConditions
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-磁片

指定要加密的特定磁片號碼。使用此參數搭配 -Partition 參數。

Type:	Int32
Aliases:	DestinationDisk
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-磁片磁碟機

指定要加密的邏輯磁碟機號。例如，C:

Type:	String
Aliases:	SpecificDrive
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

輸入

ConfigurationManagement IResultObject

輸出

系統.物件