Set-CMTSStepApplyOperatingSystem

模組:

ConfigurationManager

設定 APPLY OS 映射 任務順序步驟的實例。

Syntax

Set-CMTSStepApplyOperatingSystem
   [-ConfigFileName <String>]
   [-ConfigFilePackage <IResultObject>]
   [-LayeredDriver <OsdLayeredDriver>]
   [-Destination <DestinationType>]
   [-DestinationDisk <Int32>]
   [-DestinationDriveLetter <String>]
   [-DestinationPartition <Int32>]
   [-DestinationVariable <String>]
   [-ImagePackage <IResultObject>]
   [-ImagePackageIndex <Int32>]
   [-InstallPackage <IResultObject>]
   [-InstallPackageIndex <Int32>]
   [-RunFromNet <Boolean>]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   -InputObject <IResultObject>
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-ConfigFileName <String>]
   [-ConfigFilePackage <IResultObject>]
   [-LayeredDriver <OsdLayeredDriver>]
   [-Destination <DestinationType>]
   [-DestinationDisk <Int32>]
   [-DestinationDriveLetter <String>]
   [-DestinationPartition <Int32>]
   [-DestinationVariable <String>]
   [-ImagePackage <IResultObject>]
   [-ImagePackageIndex <Int32>]
   [-InstallPackage <IResultObject>]
   [-InstallPackageIndex <Int32>]
   [-RunFromNet <Boolean>]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-ConfigFileName <String>]
   [-ConfigFilePackage <IResultObject>]
   [-LayeredDriver <OsdLayeredDriver>]
   [-Destination <DestinationType>]
   [-DestinationDisk <Int32>]
   [-DestinationDriveLetter <String>]
   [-DestinationPartition <Int32>]
   [-DestinationVariable <String>]
   [-ImagePackage <IResultObject>]
   [-ImagePackageIndex <Int32>]
   [-InstallPackage <IResultObject>]
   [-InstallPackageIndex <Int32>]
   [-RunFromNet <Boolean>]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-Condition <IResultObject[]>]
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-Condition <IResultObject[]>]
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-Condition <IResultObject[]>]
   -InputObject <IResultObject>
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   -InputObject <IResultObject>
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   [-SetConditionFile]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   [-SetConditionFile]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   -InputObject <IResultObject>
   [-SetConditionFile]
   [-StepName <String>]
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   [-SetConditionFolder]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   [-SetConditionFolder]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   -InputObject <IResultObject>
   [-SetConditionFolder]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   -InputObject <IResultObject>
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   -InputObject <IResultObject>
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   -InputObject <IResultObject>
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   -InputObject <IResultObject>
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CMTSStepApplyOperatingSystem
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

使用此 Cmdlet 來設定套用 OS 映射 任務順序步驟的實例。

如需此步驟的詳細資訊，請參閱 關於任務順序的步驟：套用 OS 映射。

注意

從 Configuration Manager 網站磁碟機執行 Configuration Manager Cmdlet，例如 PS XYZ:\> 。 如需詳細資訊，請參閱 快速入門。

範例

範例 1

這個範例會將預設 OS 部署工作順序中的套用OS 映射步驟變更為使用特定磁片及分割區。

$tsNameOsd = "Default OS deployment"
$tsStepNameApplyOsImage = "Apply OS image"

Set-CMTSStepApplyOperatingSystem -TaskSequenceName $tsNameOsd -StepName $tsStepNameApplyOsImage -Destination SpecificDiskAndPartition -DestinationDisk 5 -DestinationPartition 50

參數

-AddCondition

指定要新增至此步驟的 condition 物件。 若要取得此物件，請使用其中一個工作順序條件 Cmdlet。 例如， CMTSStepConditionVariable。

Type:	IResultObject[]
Aliases:	AddConditions
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ClearCondition

移除此步驟中的條件。 使用 -Condition 參數可指定要移除的條件。

Type:	SwitchParameter
Aliases:	ClearConditions
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ConditionVariableName

指定要用來做為條件的任務順序變數名稱。

Type:	String
Aliases:	Variable
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ConditionVariableValue

指定要在條件中使用之任務順序變數的值。

Type:	String
Aliases:	Value
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ConfigFileName

指定要用於自訂安裝的自動或 Sysprep 應答檔案的檔案名。 請將此參數與 ConfigFilePackage 參數搭配使用。

Type:	String
Aliases:	AnswerFileName
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ConfigFilePackage

指定包含要用於自訂安裝之自動或 Sysprep 答案檔案的 package 物件。 若要取得此物件，請使用 CMPackage Cmdlet。 請將此參數與 ConfigFileName 參數搭配使用。

Type:	IResultObject
Aliases:	AnswerFilePackage
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-Confirm

執行 Cmdlet 之前提示您確認。

Type:	SwitchParameter
Aliases:	cf
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-Description

指定此任務順序步驟的選用描述。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-DestinationDisk

使用時 -Destination SpecificDiskAndPartition ，請使用此參數指定磁片號碼。 指定從 to 的 0 整數 99 。 此外，您也可以使用 DestinationPartition 參數。

Type:	Int32
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-DestinationDriveLetter

使用時 -Destination SpecificLogicalDriverLetter ，請使用此參數來指定邏輯磁碟機號。 指定的磁碟機號 C Z 。

Type:	String
Aliases:	DestinationLogicalDrive
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-DestinationPartition

使用時 -Destination SpecificDiskAndPartition ，請使用此參數指定分割區號碼。 指定從 to 的 1 整數 99 。 此外，您也可以使用 DestinationDisk 參數。

Type:	Int32
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-DestinationVariable

當您使用 -Destination LogicalDriverLetterInVariable 此參數時，請使用此參數指定具有邏輯磁碟機號的任務順序變數。 變數名稱必須是不含空格且少於256個字元的數位。

Type:	String
Aliases:	DestinationVariableName
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-DisableWildcardHandling

此參數會將萬用字元視為常值字元值。 您無法將它與 ForceWildcardHandling合併。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FileDateTimeOperator

指定 file date/time 條件的變數運算子類型。

Type:	VariableOperatorType
Accepted values:	Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FilePath

指定檔條件的路徑。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FileTimestamp

指定要用於檔條件的日期/時間值。

Type:	DateTime
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FileVersion

指定檔狀況的版本字串。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FolderDateTimeOperator

指定資料夾日期/時間條件的變數運算子。

Type:	VariableOperatorType
Accepted values:	Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FolderPath

指定資料夾條件的路徑。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-FolderTimestamp

指定用於資料夾條件的日期/時間值。

Type:	DateTime
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ForceWildcardHandling

這個參數會處理萬用字元，而且可能會造成未預期的行為 (不建議) 。 您無法將它與 DisableWildcardHandling合併。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ImagePackage

指定 OS 映射套件物件。 步驟會從這個影像套用作業系統。 使用 ImagePackageIndex 參數來設定影像索引。

若要取得此物件，請使用 CMOperatingSystemImage Cmdlet。

Type:	IResultObject
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ImagePackageIndex

指定圖像索引的整數值。 請將此參數與 ImagePackage 參數搭配使用。

Type:	Int32
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-InputObject

指定已設定 [套用 作業系統映射 ] 步驟的任務順序物件。 若要取得此物件，請使用 CMTaskSequence Cmdlet。

Type:	IResultObject
Aliases:	TaskSequence
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-InstallPackage

指定 OS 升級套件物件。 步驟會從此原始安裝來源套用作業系統。 使用 InstallPackageIndex 參數來設定 edition。

若要取得此物件，請使用 CMOperatingSystemInstaller Cmdlet。

Type:	IResultObject
Aliases:	UpgradePackage
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-InstallPackageIndex

指定 OS 升級套件 edition 的整數值。 請將此參數與 InstallPackage 參數搭配使用。

Type:	Int32
Aliases:	UpgradePackageIndex
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-IsAnyVersion

使用此參數搭配 SetConditionSoftware 參數，可比對任何版本的產品。

Type:	Boolean
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-IsContinueOnError

使用此參數可啟用 [步驟] 選項 [ 在錯誤時繼續] 選項。 當您啟用此選項時，任務順序會繼續執行。

Type:	Boolean
Aliases:	IsThisStepContinueOnError
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-IsEnabled

使用此參數可啟用此任務序列步驟。

Type:	Boolean
Aliases:	IsThisStepEnabled
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-LayeredDriver

從2107版開始，使用此參數來選取其他屬於日文和韓文語言的鍵盤類型。 指定與 Windows 一起安裝之層次驅動程式的整數值。 使用與 OsdLayeredDriver 任務順序變數相同的值。

Type:	OsdLayeredDriver
Aliases:	KeyboardDriver
Accepted values:	DoNotSpecify, Driver1, Driver2, Driver3, Driver4, Driver5, Driver6
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-MoveToIndex

將此步驟移至任務順序中指定的索引位置。

Type:	Int32
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-MsiFilePath

搭配使用此參數與SetConditionSoftware參數，可指定 Windows 安裝程式檔案的路徑。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-NewStepName

使用此參數可重新命名此任務序列步驟。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-OperatorType

指定與任務順序可變條件搭配使用的運算子。

Type:	VariableOperatorType
Accepted values:	Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-Query

指定用於條件的 WMI 查詢字串。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RegistryKey

指定要搭配登錄條件使用的機碼。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RegistryOperator

指定要搭配登錄條件使用的運算子。

Type:	VariableOperatorType
Accepted values:	Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RegistryValueData

指定要搭配登錄條件使用的數值資料。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RegistryValueName

指定要搭配登錄條件使用的值名稱。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionFile

使用此參數可移除檔狀況。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionFolder

使用此參數可移除資料夾條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionIfStatement

使用此參數可移除 if 語句條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionOperatingSystem

使用此參數可移除作業系統條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionQueryWmi

使用此參數可移除 WMI 查詢準則。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionRegistry

使用此參數可移除登錄條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionSoftware

使用此參數可移除軟體條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveConditionVariable

使用此參數可移除任務順序變數條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RootKey

指定登錄條件所使用的根機碼。

Type:	RegistryRootKeyType
Accepted values:	HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-RunFromNet

將此參數設定為 $true 以允許任務順序直接從發佈點套用 OS 映射。

為了獲得最佳的安全性，建議不要啟用此設定。 此選項專為在具有有限儲存容量的裝置上使用而設計。 如需詳細資訊，請參閱 直接從發佈點存取內容。

Type:	Boolean
Aliases:	AllowAccessFromDistributionPoint
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionFile

新增檔條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionFolder

新增資料夾條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionIfStatement

新增 if 語句條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionOperatingSystem

新增作業系統條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionQueryWmi

新增 WMI 查詢準則。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionRegistry

新增登錄條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionSoftware

新增軟體條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SetConditionVariable

新增任務順序變數條件。

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-StatementType

設定語句條件的類型 if 。

Type:	ConditionStatementType
Aliases:	Operator
Accepted values:	All, Any, None
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-StepName

指定變更的選取步驟名稱。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-StepOrder

使用此參數可重新排序任務順序中的步驟。

Type:	ReorderType
Accepted values:	MoveUp, MoveDown, MoveToIndex
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SupportedPlatform

使用此參數可指定作業系統條件的平臺。

Type:	IResultObject[]
Aliases:	SupportedPlatforms
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-TaskSequenceId

指定要設定之 [套用OS 映射] 步驟的任務順序套件識別碼。 例如，這個值是標準套件識別碼 XYZ00858 。

Type:	String
Aliases:	Id, TaskSequencePackageId
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-TaskSequenceName

指定要設定的 [套用 OS 映射 ] 步驟的任務序列名稱。

Type:	String
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-ValueType

指定登錄條件的數值型別。

Type:	RegistryValueType
Accepted values:	RegistrySZ, RegistryExpandSZ, RegistryDWord
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-VersionOperator

指定要搭配檔條件使用的運算子。

Type:	VariableOperatorType
Accepted values:	Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-WhatIf

顯示執行 Cmdlet 時會發生什麼情況。 不會執行 Cmdlet。

Type:	SwitchParameter
Aliases:	wi
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-命名空間

指定 WMI 查詢準則的命名空間。

Type:	String[]
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-條件

指定要與此步驟搭配使用的 condition 物件。 若要取得此物件，請使用其中一個工作順序條件 Cmdlet。 例如， CMTSStepConditionVariable。

Type:	IResultObject[]
Aliases:	SubCondition, SubConditions
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-目的地

指定您要套用此作業系統的位置。 如果您未指定此參數，則預設值為 NextAvailableFormattedPartition 。

• NextAvailableFormattedPartition：使用此工作順序中的 [ Apply 作業系統 ] 或 [套用 資料影像 ] 步驟尚未設定的下一個連續分割區。

• SpecificDiskAndPartition：使用 DestinationDisk 參數指定磁片號碼，並使用 DestinationPartition 參數指定分割區編號。

• SpecificLogicalDriverLetter：使用DestinationDriveLetter參數，依 Windows PE，指定指派給磁碟分割的邏輯磁碟機號。 此磁碟機號可以與新部署的 OS 所指派的磁碟機號不同。

• LogicalDriverLetterInVariable：使用DestinationVariable參數，指定包含指派給分割區之磁碟機盤符的任務順序變數，Windows PE。 此變數通常是使用 CMTSStepPartitionDisk和分割磁片任務順序步驟的set-或CMTSStepPartitionDisk Cmdlet 的DiskNumberVariable參數來設定。

Type:	DestinationType
Accepted values:	NextAvailableFormattedPartition, SpecificDiskAndPartition, SpecificLogicalDriverLetter, LogicalDriverLetterInVariable
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

輸入

ConfigurationManagement IResultObject

輸出

系統.物件

相關連結

• CMTSStepApplyOperatingSystem
• 新 CMTSStepApplyOperatingSystem
• Remove-CMTSStepApplyOperatingSystem
• 關於任務順序步驟：套用 OS 映射