List Containers operation returns a list of the containers under the specified account.
List Containers request may be constructed as follows. HTTPS is recommended. Replace myaccount with the name of your storage account:
|Method||Request URI||HTTP Version|
Note that the URI must always include the forward slash (/) to separate the host name from the path and query portions of the URI. In the case of the
List Containers operation, the path portion of the URI is empty.
Emulated Storage Service Request
When making a request against the emulated storage service, specify the emulator hostname and Blob service port as
127.0.0.1:10000, followed by the emulated storage account name:
|Method||Request URI||HTTP Version|
Note that emulated storage only supports blob sizes up to 2 GB.
For more information, see Using the Azure Storage Emulator for Development and Testing and Differences Between the Storage Emulator and Azure Storage Services.
The following additional parameters may be specified on the request URI.
||Optional. Filters the results to return only containers whose name begins with the specified prefix.|
||Optional. A string value that identifies the portion of the list of containers to be returned with the next listing operation. The operation returns the
The marker value is opaque to the client.
||Optional. Specifies the maximum number of containers to return. If the request does not specify
Note that if the listing operation crosses a partition boundary, then the service will return a continuation token for retrieving the remainder of the results. For this reason, it is possible that the service will return fewer results than specified by
If the parameter is set to a value less than or equal to zero, the server returns status code 400 (Bad Request).
||Optional. Include this parameter to specify that the container's metadata be returned as part of the response body.
Note that metadata requested with this parameter must be stored in accordance with the naming restrictions imposed by the 2009-09-19 version of the Blob service. Beginning with this version, all metadata names must adhere to the naming conventions for C# identifiers.
The following table describes required and optional request headers.
||Required. Specifies the authentication scheme, account name, and signature. For more information, see Authentication for the Azure Storage Services.|
||Required. Specifies the Coordinated Universal Time (UTC) for the request. For more information, see Authentication for the Azure Storage Services.|
||Required for all authenticated requests. Specifies the version of the operation to use for this request. For more information, see Versioning for the Azure Storage Services.|
||Optional. Provides a client-generated, opaque value with a 1 KB character limit that is recorded in the analytics logs when storage analytics logging is enabled. Using this header is highly recommended for correlating client-side activities with requests received by the server. For more information, see About Storage Analytics Logging and Azure Logging: Using Logs to Track Storage Requests.|
The response includes an HTTP status code, a set of response headers, and a response body in XML format.
A successful operation returns status code 200 (OK).
For information about status codes, see Status and Error Codes.
The response for this operation includes the following headers. The response also includes additional standard HTTP headers. All standard headers conform to the HTTP/1.1 protocol specification.
||Standard HTTP/1.1 header. Specifies the format in which the results are returned. Currently, this value is application/xml.|
||This header uniquely identifies the request that was made and can be used for troubleshooting the request. For more information, see Troubleshooting API Operations.|
||Indicates the version of the Blob service used to execute the request. This header is returned for requests made against version 2009-09-19 and above.|
||A UTC date/time value generated by the service that indicates the time at which the response was initiated.|
The format of the response body is as follows.
<?xml version="1.0" encoding="utf-8"?> <EnumerationResults ServiceEndpoint="https://myaccount.blob.core.windows.net"> <Prefix>string-value</Prefix> <Marker>string-value</Marker> <MaxResults>int-value</MaxResults> <Containers> <Container> <Name>container-name</Name> <Properties> <Last-Modified>date/time-value</Last-Modified> <Etag>etag</Etag> <LeaseStatus>locked | unlocked</LeaseStatus> <LeaseState>available | leased | expired | breaking | broken</LeaseState> <LeaseDuration>infinite | fixed</LeaseDuration> </Properties> <Metadata> <metadata-name>value</metadata-name> </Metadata> </Container> </Containers> <NextMarker>marker-value</NextMarker> </EnumerationResults>
LeaseDuration only appear in version 2012-02-12 and later.
Beginning with version 2013-08-15, the
AccountName attribute for the
EnumerationResults element has been renamed to
URL element has also been removed from the
Container element. For versions prior to 2013-08-15, the container's URL, as specified by the
URL field, does not include the
restype=container parameter. If you use this value to make subsequent requests against the enumerated containers, be sure to append this parameter to indicate that the resource type is a container.
MaxResults elements are only present if they were specified on the URI. The
NextMarker element has a value only if the list results are not complete.
Metadata element is present only if the
include=metadata parameter was specified on the URI. Within the
Metadata element, the value of each name-value pair is listed within an element corresponding to the pair's name.
If a metadata name-value pair violates the naming restrictions enforced by the 2009-09-19 version, the response body indicates the problematic name within an
x-ms-invalid-name element, as shown in the following XML fragment:
<Metadata> <MyMetadata1>first value</MyMetadata1> <MyMetadata2>second value</MyMetadata2> <x-ms-invalid-name>invalid-metadata-name</x-ms-invalid-name> </Metadata>
Beginning with version 2009-09-19, the response body for
List Containers returns the container's last modified time in an element named
Last-Modified. In previous versions, this element was named
Only the account owner may call this operation.
If you specify a value for the
maxresults parameter and the number of containers to return exceeds this value, or exceeds the default value for
maxresults, the response body will contain the
NextMarker element (also referred to as a continuation token).
NextMarker indicates the next container to return on a subsequent request. To return the next set of items, specify the value of
NextMarker for the
marker parameter on the URI for the subsequent request. Note that the value of
NextMarker should be treated as opaque.
If the listing operation crosses a partition boundary, then the service will return a value for the
NextMarker element for retrieving the remainder of the results from the next partition. A listing operation that spans more than one partition results in a smaller set of items being returned than is specified by
maxresults, or than the default of 5000. Your application should always check for the presence of the
NextMarker element when you perform a listing operation, and handle it accordingly.
Containers are listed in alphabetical order in the response body.
List Containers operation times out after 30 seconds.
The following sample URI requests the list of containers for an account, setting the maximum results to return for the initial operation to 3.
GET https://myaccount.blob.core.windows.net/?comp=list&maxresults=3 HTTP/1.1
The request is sent with these headers:
x-ms-version: 2013-08-15 x-ms-date: Wed, 23 Oct 2013 22:08:44 GMT Authorization: SharedKey myaccount:CY1OP3O3jGFpYFbTCBimLn0Xov0vt0khH/D5Gy0fXvg=
The status code and response headers are returned as follows:
HTTP/1.1 200 OK Transfer-Encoding: chunked Content-Type: application/xml Date: Wed, 23 Oct 2013 22:08:54 GMT x-ms-version: 2013-08-15 Server: Windows-Azure-Blob/1.0 Microsoft-HTTPAPI/2.0
The response XML for this request is as follows. Note that the
NextMarker element follows the set of containers and includes the name of the next container to be returned.
<?xml version="1.0" encoding="utf-8"?> <EnumerationResults ServiceEndpoint="https://myaccount.blob.core.windows.net/"> <MaxResults>3</MaxResults> <Containers> <Container> <Name>audio</Name> <Properties> <Last-Modified>Wed, 23 Oct 2013 20:39:39 GMT</Last-Modified> <Etag>0x8CACB9BD7C6B1B2</Etag> </Properties> </Container> <Container> <Name>images</Name> <Properties> <Last-Modified>Wed, 23 Oct 2013 20:39:39 GMT</Last-Modified> <Etag>0x8CACB9BD7C1EEEC</Etag> </Properties> </Container> <Container> <Name>textfiles</Name> <Properties> <Last-Modified>Wed, 23 Oct 2013 20:39:39 GMT</Last-Modified> <Etag>0x8CACB9BD7BACAC3</Etag> </Properties> </Container> </Containers> <NextMarker>video</NextMarker> </EnumerationResults>
The subsequent list operation specifies the marker on the request URI, as follows. The next set of results is returned beginning with the container specified by the marker.
Authentication for the Azure Storage Services
Status and Error Codes
Blob Service Error Codes
Enumerating Blob Resources
Using the Azure Storage Emulator for Development and Testing
Setting Timeouts for Blob Service Operations