使用商務用 Skype 2015 設定用戶端體驗Configure the client experience with Skype for Business 2015

摘要: 若要瞭解如何設定商務用 Skype 2015 使用者的用戶端體驗,請閱讀本主題。Summary: Read this topic to learn how to configure the client experience for Skype for Business 2015 users.

商務用 skype 2015 提供以 Skype 消費者產品體驗為基礎的新使用者體驗。Skype for Business 2015 provides a new user experience that is based on the Skype consumer product experience. 除了 Lync 的所有功能之外,商務用 Skype 也會以簡化的控制項和熟悉的圖示來提供新功能。In addition to all the features of Lync, Skype for Business provides new features with simplified controls and familiar icons. 如需新用戶端體驗的詳細資訊,請參閱探索商務用 SkypeFor detailed information about the new client experience, see Explore Skype for Business.

商務用 skype 伺服器支援新的商務用 Skype 用戶端體驗,以及 Lync 用戶端體驗。Skype for Business Server supports the new Skype for Business client experience as well as the Lync client experience. 作為系統管理員,您可以為使用者選擇首選的用戶端體驗。As an administrator, you can choose the preferred client experience for your users. 例如,您可能會想要部署 Lync 用戶端體驗,直到貴組織中的使用者在新的商務用 Skype 體驗中受到全面訓練為止。For example, you might want to deploy the Lync client experience until users in your organization are fully trained in the new Skype for Business experience. 或者,如果您尚未將所有使用者升級到商務用 Skype Server,您可能會希望所有使用者都能使用相同的用戶端體驗,直到全部都升級到新的伺服器為止。Or, if you have not yet upgraded all users to Skype for Business Server, you might want all users to have the same client experience until all are upgraded to the new server.

重要

如果貴組織已部署商務用 Skype Server 和 Lync Server,則預設的用戶端體驗會依伺服器版本和 UI 設定而有所不同。If your organization has both Skype for Business Server and Lync Server deployed, the default client experience will differ depending on server versions and UI settings. 當使用者第一次啟動商務用 Skype 時,他們將永遠會看到商務用 Skype 使用者介面,即使您已選取 Lync 用戶端體驗也一樣。When users launch Skype for Business for the first time, they will always see the Skype for Business user interface--even if you have selected the Lync client experience. 幾分鐘之後,系統會要求使用者切換到 Lync 模式。After several minutes, users are asked to switch to Lync mode. 如需詳細資訊,請參閱本主題稍後的第一次啟動用戶端行為For more information, see First launch client behavior later in this topic.

注意

Lync 2013 用戶端體驗不是商務用 Skype 2016 用戶端版本或更新版本的選項。The Lync 2013 client experience is not an option for Skype for Business 2016 client versions or later. 在您嘗試將用戶端環境設定為使用 Lync 2013 用戶端之前,請先檢查用戶端版本,以確保它不是以數位16開頭;例如: x.x.x。Before you attempt to configure your client environment to use the Lync 2013 client, please check the client version to ensure it does not start with the number 16; for example: 16.x.x.x.

設定用戶端體驗Configure the client experience

您可以透過使用CSClientPolicy Cmdlet 與 EnableSkypeUI 參數,來指定貴組織中的使用者所能看到的用戶端體驗:You can specify the client experience the users in your organization will see by using the Set-CSClientPolicy cmdlet with the EnableSkypeUI parameter:

Set-CsClientPolicy  [-Identity <XdsIdentity] [-EnableSkypeUI <$true | $false>]

其中 XdsIdentity 指的是全域原則或命名網站原則。where XdsIdentity refers to the Global policy or a named site policy.

下列命令會針對貴組織中受全域原則影響的所有使用者,選取商務用 Skype 用戶端體驗(請記住,網站或使用者專用原則會覆寫全域原則):The following command selects the Skype for Business client experience for all users in your organization affected by the Global policy (remember, site or user-specific policies override the Global policy):

Set-CsClientPolicy -Identity Global -EnableSkypeUI $true

[下一步] 命令會針對貴組織中的所有使用者選取由全域原則影響的 Lync 用戶端體驗:The next command selects the Lync client experience for all users in your organization affected by the Global policy:

Set-CsClientPolicy -Identity Global -EnableSkypeUI $false

[下一步] 命令會針對雷德蒙網站中的所有使用者選取商務用 Skype 用戶端體驗:The next command selects the Skype for Business client experience for all users within the Redmond site:

Set-CsClientPolicy -Identity site:Redmond -EnableSkypeUI $true

如果您想要針對貴組織內的特定使用者設定用戶端體驗,您可以使用 CsClientPolicy Cmdlet 建立新使用者策略,然後使用授與 CsClientPolicy Cmdlet,將原則指派給特定的使用者。If you want to configure the client experience for specific users within your organization, you can create a new user policy by using the New-CsClientPolicy cmdlet, and then assign the policy to specific users by using the Grant-CsClientPolicy cmdlet.

例如,下列命令會建立新的用戶端原則 SalesClientUI,以選取商務用 Skype 用戶端體驗:For example, the following command creates a new client policy, SalesClientUI, that selects the Skype for Business client experience:

New-CsClientPolicy -Identity SalesClientUI -EnableSkypeUI $true

下一個命令會將原則(SalesClientUI)指派給銷售部門的所有成員:The next command assigns the policy, SalesClientUI, to all members of the Sales department:

Get-CsUser -LDAPFilter "Department=Sales" | Grant-CsClientPolicy -PolicyName SalesClientUI

第一次啟動用戶端行為First launch client behaviors

根據預設,當使用者第一次啟動商務用 Skype 2015 時,他們將永遠會看到商務用 Skype 的使用者介面,即使您已選取 Lync 用戶端體驗,只要將 EnableSkypeUI 參數的值設定為 $False (如下所述)。先前.By default, when users launch Skype for Business 2015 for the first time, they will always see the Skype for Business user interface--even if you have selected the Lync client experience by setting the value of the EnableSkypeUI parameter to $False as described previously. 幾分鐘之後,系統會要求使用者切換到 Lync 模式。After several minutes, users will then be asked to switch to Lync mode.

如果您想要在使用者第一次啟動商務用 Skype 用戶端時顯示 Lync 使用者介面,請在用戶端第一次更新之後,按照下列步驟進行:If you want to display the Lync user interface when users launch the Skype for Business client for the first time, follow these steps before the client is started for the first time after being updated:

  1. 確認您使用的原則EnableSkypeUI中的值設定為 $False,如先前所述。Confirm that the value of EnableSkypeUI is set to $False in the policy you are using as described previously.

  2. 更新使用者電腦上的系統登錄。Update the system registry on the user's computer. 您應該在使用者第一次啟動商務用 Skype 用戶端之前執行此動作,而您只能執行此動作一次。You should do this before the first time users launch the Skype for Business client, and you should do this only once. 如需如何建立群組原則物件以更新加入網域的電腦上的登錄的相關資訊,請參閱主題稍後的章節。For information about how to create a Group Policy Object to update the registry on a domain joined computer, see the section later in the topic.

    [HKEY_CURRENT_USER \software\microsoft\office\lync] 索引鍵中,建立新的二進位值。In the [HKEY_CURRENT_USER\Software\Microsoft\Office\Lync] key, create a new Binary value.

    值名稱必須是EnableSkypeUI,而值資料必須設定為00 00 00 00The Value name must be EnableSkypeUI, and the Value data must be set to 00 00 00 00.

    此索引鍵看起來應該像以下這樣:The key should look like the following:

    [HKEY_CURRENT_USER\Software\Microsoft\Office\Lync]
    "CanSharePptInCollab"=dword:00000001
    "CanShareOneNoteInCollab"=dword:00000001
    "CanAppShareInCollab"=dword:00000001
    "EnableSkypeUI"=hex:00,00,00,00
    

Lync 使用者介面現在會在使用者第一次啟動商務用 Skype 用戶端時顯示。The Lync user interface will now be displayed when users launch the Skype for Business client for the first time.

控制歡迎畫面教學課程的顯示Control the display of the Welcome screen tutorial

當使用者開啟商務用 Skype 用戶端時,預設行為是顯示 [歡迎] 畫面,其中包含大部分人要求的7個快速秘訣When users open the Skype for Business client, the default behavior is to display a Welcome screen that includes 7 Quick tips most people ask for. 您可以在用戶端電腦上新增下列登錄值,以關閉歡迎畫面的顯示,但仍允許使用者存取教學課程:You can turn off the display of the Welcome screen but still allow users to access the tutorial by adding the following Registry value on the client computer:

[HKEY_CURRENT_USER \software\microsoft\office\15.0\lync] 索引鍵中,建立新的DWORD (32位)值In the [HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Lync] key, create a new DWORD (32-bit) Value. 值名稱必須是IsBasicTutorialSeenByUser,而值資料必須設定為1The Value name must be IsBasicTutorialSeenByUser, and the Value data must be set to 1.

此索引鍵看起來應該像以下這樣:The key should look like the following:

"IsBasicTutorialSeenByUser"=dword:00000001

關閉用戶端教學課程Turn off the client tutorial

如果您不想讓使用者存取教學課程,您可以使用下列登錄值來關閉用戶端教學課程:If you do not want your users to be able to access the tutorial, you can turn off the client tutorial with the following Registry value:

[HKEY_CURRENT_USER \software\microsoft\office\15.0\lync] 索引鍵中,建立新的DWORD (32位)值In the [HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Lync] key, create a new DWORD (32-bit) Value. 值名稱必須是TutorialFeatureEnabled,而值資料必須設定為0The Value name must be TutorialFeatureEnabled, and the Value data must be set to 0.

LyncLync

"TutorialFeatureEnabled"=dword:00000000

您可以將值資料設定為1,將教學課程改回開啟。You can turn the tutorial back on by setting the Value data to 1.

預設用戶端行為Default client behaviors

如果貴組織已部署商務用 Skype Server 和 Lync Server,則用戶端體驗會隨著伺服器版本和 Skype UI 設定而有所不同。If your organization has both Skype for Business Server and Lync Server deployed, the client experience will differ depending on server versions and the Skype UI setting. 下表顯示以伺服器版本和 UI 設定為基礎的初始用戶端體驗:The following table shows the initial client experience based on server version and the UI setting:

伺服器版本Server version EnableSkypeUI 設定EnableSkypeUI setting 用戶端體驗Client experience
商務用 Skype 伺服器Skype for Business Server 設置Default
商務用 SkypeSkype for Business
商務用 Skype 伺服器Skype for Business Server 滿足True
商務用 SkypeSkype for Business
商務用 Skype 伺服器Skype for Business Server 虛假False
使用者要求切換至 Lync 模式(如果您將 UI 設定變更為 $true,使用者就可以在稍後切換到商務用 Skype)User asked to switch to Lync mode (user can switch to Skype for Business later if you change the UI setting to $true)
Lync Server 2010 或 Lync Server 2013 (含正確的修補程式)Lync Server 2010 or Lync Server 2013 (with correct patches)
設置Default
使用者要求切換至 Lync 模式(如果您將 UI 設定變更為 $true,使用者就可以在稍後切換到商務用 Skype)User asked to switch to Lync mode (user can switch to Skype for Business later if you change the UI setting to $true)
Lync Server 2010 或 Lync Server 2013 (含正確的修補程式)Lync Server 2010 or Lync Server 2013 (with correct patches)
滿足True
商務用 SkypeSkype for Business
Lync Server 2010 或 Lync Server 2013 (含正確的修補程式)Lync Server 2010 or Lync Server 2013 (with correct patches)
虛假False
使用者要求切換至 Lync 模式(如果您將 UI 設定變更為 $true,使用者就可以在稍後切換到商務用 Skype)User asked to switch to Lync mode (user can switch to Skype for Business later if you change the UI setting to $true)
Lync Server 2010 或 Lync Server 2013 (不含補丁程式)Lync Server 2010 or Lync Server 2013 (without patches)
設置Default
使用者要求切換至 Lync 模式(使用者稍後無法切換到商務用 Skype)User asked to switch to Lync mode (user cannot switch to Skype for Business later)

下表顯示管理員變更 Skype UI 體驗的初始設定時的用戶端體驗:The next table shows the client experience when the administrator changes the initial setting for the Skype UI experience:

伺服器版本Server version EnableSkypeUI 設定EnableSkypeUI setting 用戶端 UI = LyncClient UI = Lync 用戶端 UI = 商務用 SkypeClient UI = Skype for Business
商務用 Skype 伺服器Skype for Business Server 滿足True
使用者要求切換到商務用 SkypeUser asked to switch to Skype for Business
商務用 SkypeSkype for Business
商務用 Skype 伺服器Skype for Business Server 虛假False
Lync 模式Lync mode
使用者要求切換至 Lync 模式User asked to switch to Lync mode
Lync Server 2010 或 Lync Server 2013 (含正確的修補程式)Lync Server 2010 or Lync Server 2013 (with correct patches)
滿足True
使用者要求切換到商務用 SkypeUser asked to switch to Skype for Business
商務用 SkypeSkype for Business
Lync Server 2010 或 Lync Server 2013 (含正確的修補程式)Lync Server 2010 or Lync Server 2013 (with correct patches)
虛假False
Lync 模式Lync mode
使用者要求切換至 Lync 模式User asked to switch to Lync mode
Lync Server 2010 或 Lync Server 2013 (不含補丁程式)Lync Server 2010 or Lync Server 2013 (without patches)
設置Default
Lync 模式(無法切換到商務用 Skype)Lync mode (cannot switch to Skype for Business)
Lync 模式(無法切換到商務用 Skype)Lync mode (cannot switch to Skype for Business)

管理商務用 Skype 用戶端設定所需的修補程式版本如下:The patch versions required to manage the configuration of the Skype for Business client are:

  • Lync Server 2010-Lync Server 2010 的2015年2月累計更新(4.0.7577.710)。Lync Server 2010 - February 2015 Cumulative Update (4.0.7577.710) for Lync Server 2010. 如需詳細資訊,請參閱Lync Server 2010 更新For information, see Updates for Lync Server 2010

  • Lync Server 2013-Lync Server 2013 的2014年12月累計更新(5.0.8308.857)。Lync Server 2013 - December 2014 Cumulative Update (5.0.8308.857) for Lync Server 2013. 如需詳細資訊,請參閱Lync Server 2013 更新For information, see Updates for Lync Server 2013.

建立群組原則物件來修改加入網域的電腦上的登錄Create a Group Policy Object to modify the registry on a domain joined computer

[登錄更新] 會在使用者第一次啟動商務用 Skype 2015 用戶端時,顯示 Lync 用戶端體驗一次。The registry update to display the Lync client experience the first time a user launches the Skype for Business 2015 client should be done only once. 如果您使用群組原則物件(GPO)來更新註冊表,您需要定義物件來建立新的值,而不是更新值資料。If you use a Group Policy Object (GPO) to update the registry, you need to define the object to create a new value rather than update the Value data. 當套用 GPO 時,如果新值不存在,GPO 將會建立它,並將值資料設定為0。When the GPO is applied, if the new value does not exist, the GPO will create it and set the Value data to 0.

下列程式說明如何修改註冊表,以便在使用者第一次啟動商務用 Skype 2015 用戶端時顯示 Lync 用戶端體驗。The following procedure describes how to modify the registry so that the Lync client experience is displayed the first time a user launches the Skype for Business 2015 client. 您也可以使用此程式來更新註冊表,如前文所述,停用歡迎畫面教學課程。You can also use this procedure to update the registry to disable the Welcome screen tutorial as described earlier.

建立 GPOTo create the GPO

  1. 啟動群組原則管理主控台Start the Group Policy Management console.

    如需如何使用群組原則管理主控台的相關資訊,請參閱群群組原則管理主控台For information about how to use the Group Policy Management Console, see Group Policy Management Console.

  2. 以滑鼠右鍵按一下 [群群組原則物件] 節點,然後在功能表上選取 [新增]。Right-click the Group Policy Objects node and select New on the menu.

  3. 在 [新增 gpo ] 對話方塊中,輸入 GPO 的名稱,例如 [MakeLyncDefaultUI],然後按一下 [確定]In the New GPO dialog, enter a name for the GPO, for example,MakeLyncDefaultUI, and then click OK.

  4. 以滑鼠右鍵按一下您剛建立的新 GPO,然後從功能表中選取 [編輯]。Right-click on the new GPO you just created and then select Edit from the menu.

  5. 在 [群組原則管理編輯器] 中,展開 [使用者設定],展開 [喜好設定],展開 [ Windows 設定],然後選取 [登錄] 節點。In the Group Policy Management Editor, expand User Configuration, expand Preferences, expand Windows Settings, and then select the Registry node.

  6. 以滑鼠右鍵按一下 [登錄] 節點,然後選取 [新增 > 註冊專案]。Right-click on the Registry node, and then select New > Registry Item.

  7. 在 [新增登錄屬性] 對話方塊中,更新下列專案:On the New Registry Properties dialog, update the following:

    Field 要選取或輸入的值Value to select or enter
    動作Action
    建立Create
    一兩Hive
    HKEY_CURRENT_USERHKEY_CURRENT_USER
    索引鍵路徑Key Path
    Software\Microsoft\Office\LyncSoftware\Microsoft\Office\Lync
    值名稱Value name
    EnableSkypeUIEnableSkypeUI
    數值型別Value type
    REG_BINARYREG_BINARY
    值資料Value data
    0000000000000000
  8. 按一下 [確定] 儲存變更,然後關閉該 GPO。Click OK to save your changes, and then close the GPO.

接著,您必須將您所建立的 GPO 連結至您要指派原則的使用者群組(例如 OU)。Next, you'll need to link the GPO you created to the group of users that you want to assign the policy to, such as an OU.

使用 GPO 指派原則To use the GPO to assign the policy

  1. 在 [群組原則管理主控台] 中,以滑鼠右鍵按一下您要指派原則的 OU,然後選取 [連結到現有的 GPO]。In the Group Policy Management Console, right-click on the OU you want to assign the policy to, and then select Link to an existing GPO.

  2. 在 [選取 gpo ] 對話方塊中,選取您所建立的 GPO,然後選取 [確定]On the Select GPO dialog, select the GPO you created, and then select OK.

  3. 在目標使用者的電腦上,開啟命令提示字元,然後輸入下列命令:On the target user's computer, open a command prompt and type the following command:

gpupdate /target:user
The message "Updating policy..." is displayed while the GPO is applied. When it is completed, the message "User Policy update has completed successfully" is displayed.
  1. 在命令提示字元中,輸入下列命令:At the command prompt, type the following command:

    gpresult/rgpresult /r

    您應該會看到「指派的群群組原則物件」與您所建立之 GPO 的名稱,如下所示。You should see "Assigned Group Policy Objects" with the name of the GPO you created displayed below.

您也可以檢查登錄,以驗證 GPO 是否已在使用者的電腦上成功更新登錄。You can also verify that the GPO has successfully updated the registry on a user's computer by examining the registry. 開啟 [登錄編輯程式],然後流覽至 [HKEY_CURRENT_USER \software\microsoft\office\lync] 鍵。Open Registry Editor and navigate to the [HKEY_CURRENT_USER\Software\Microsoft\Office\Lync] key. 如果 GPO 成功更新了註冊表,您會看到一個名為 EnableSkypeUI 的值,其值為0。If the GPO successfully updated the registry you will see a value named EnableSkypeUI with a value of 0.