升級為不同的 SQL Server 2014 版本 (安裝程式)Upgrade to a Different Edition of SQL Server 2014 (Setup)

[SQL Server]SQL Server 安裝程式支援各種不同 SQL Server 2014SQL Server 2014 版本之間的版本升級。Setup supports edition upgrade among various editions of SQL Server 2014SQL Server 2014. 如需支援版本升級方式的詳細資訊,請參閱 支援的版本與版本升級For information about supported edition upgrade paths, see Supported Version and Edition Upgrades. 在您起始 SQL Server 2014SQL Server 2014執行個體的版本升級之前,請檢閱以下主題:Before you initiate the edition upgrade of an instance of SQL Server 2014SQL Server 2014, review the following topics:

注意

[SQL Server]SQL Server 在叢集環境中: 其中一個節點上執行版本升級[SQL Server]SQL Server叢集就已足夠。[SQL Server]SQL Server in a clustered environment: Running edition upgrade on one of the nodes of [SQL Server]SQL Server cluster is sufficient. 這個節點可以是主動或被動節點,而且引擎不會在版本升級期間讓資源離線。This node can be either active or passive, and the engine does not bring the resources offline during the Edition Upgrade. 版本升級之後,您必須重新啟動 [SQL Server]SQL Server 執行個體或容錯移轉至不同的節點。After the edition upgrade it is required to either restart the [SQL Server]SQL Server instance or failover to a different node.

先決條件Prerequisites

如果是本機安裝,您必須以管理員身分執行安裝程式。For local installations, you must run Setup as an administrator. 如果您是從遠端共用位置安裝 [SQL Server]SQL Server ,則必須使用對遠端共用位置具有讀取權限的網域帳戶。If you install [SQL Server]SQL Server from a remote share, you must use a domain account that has read permissions on the remote share.

重要

若要啟動 [SQL Server]SQL Server 版本變更,您必須重新啟動 [SQL Server]SQL Server 服務。For the [SQL Server]SQL Server edition change to be activated, you must restart [SQL Server]SQL Server services. 這樣會導致應用程式關閉,同時服務會離線。This will result in application down time while services are offline.

程序Procedure

若要升級至不同的 SQL Server 2014SQL Server 2014 版本To upgrade to a different edition of SQL Server 2014SQL Server 2014

  1. 插入 [SQL Server]SQL Server 安裝媒體。Insert the [SQL Server]SQL Server installation media. 在根資料夾中按兩下 setup.exe,或從 [組態工具] 啟動 [ [SQL Server]SQL Server 安裝中心]。From the root folder, double-click setup.exe or launch the [SQL Server]SQL Server Installation Center from Configuration Tools. 若要從網路共用進行安裝,請找出共用上的根資料夾,然後按兩下 Setup.exe。To install from a network share, locate the root folder on the share, and then double-click Setup.exe.

  2. 若要將現有的 SQL Server 2014SQL Server 2014 執行個體升級至不同的版本,請在 [ [SQL Server]SQL Server 安裝中心] 中,按一下 [維護] ,然後選取 [版本升級]To upgrade an existing instance of SQL Server 2014SQL Server 2014 to a different edition, from the [SQL Server]SQL Server Installation Center click Maintenance, and then select Edition Upgrade.

  3. 如果需要安裝程式支援檔案, [SQL Server]SQL Server 安裝程式就會安裝這些檔案。If Setup support files are required, [SQL Server]SQL Server Setup installs them. 如果系統指示您重新啟動電腦,請先重新啟動,然後再繼續進行。If you are instructed to restart your computer, restart before you continue.

  4. 系統組態檢查會在電腦上執行探索作業。The System Configuration Checker runs a discovery operation on your computer. 若要繼續進行,請按一下 [確定]To continue, click OK.

  5. 在 [產品金鑰] 頁面上,選取選項按鈕,指出您要升級至免費的 [SQL Server]SQL Server版本,還是您擁有產品之實際執行版本的 PID 金鑰。On the Product Key page, select a radio button to indicate whether you are upgrading to a free edition of [SQL Server]SQL Server, or whether you have a PID key for a production version of the product. 如需詳細資訊,請參閱 < 版本和 SQL Server 2014 元件Supported Version and Edition UpgradesFor more information, see Editions and Components of SQL Server 2014 and Supported Version and Edition Upgrades.

  6. 在 [授權條款] 頁面上,閱讀授權合約,然後選取要接受授權條款和條件的核取方塊。On the License Terms page, read the license agreement, and then select the check box to accept the licensing terms and conditions. 若要繼續進行,請按 [下一步]To continue, click Next. 若要結束安裝程式,請按一下 [取消]To end Setup, click Cancel.

  7. 在 [選取執行個體] 頁面中,指定要升級的 [SQL Server]SQL Server 執行個體。On the Select Instance page, specify the instance of [SQL Server]SQL Server to upgrade.

  8. [版本升級規則] 頁面會驗證您的電腦組態,然後版本升級作業才會開始。The Edition Upgrade Rules page validates your computer configuration before the edition upgrade operation begins.

  9. [已完成升級版本的準備工作] 頁面會顯示在安裝期間指定之安裝選項的樹狀檢視。The Ready to Upgrade Edition page shows a tree view of installation options that were specified during Setup. 若要繼續,請按一下 [升級]To continue, click Upgrade.

  10. 在版本升級程序期間,您必須重新啟動這些服務,才能挑選新的設定。During the edition upgrade process, the services need to be restarted to pick up the new setting. 版本升級之後,[完成] 頁面會提供版本升級之摘要記錄檔的連結。After edition upgrade, the Complete page provides a link to the summary log file for the edition upgrade. 若要關閉精靈,請按一下 [關閉]To close the wizard, click Close.

  11. [完成] 頁面會提供安裝和其他重要注意事項之摘要記錄檔的連結。The Complete page provides a link to the summary log file for the installation and other important notes.

  12. 如果指示您重新啟動電腦,請立刻執行。If you are instructed to restart the computer, do so now. 當您完成安裝時,請務必閱讀安裝精靈所提供的訊息。It is important to read the message from the Installation Wizard when you are done with Setup. 如需安裝程式記錄檔的詳細資訊,請參閱 檢視與讀取 SQL Server 安裝程式記錄檔For information about Setup log files, see View and Read SQL Server Setup Log Files.

  13. 如果您是從 SQL Server ExpressSQL Server Express升級,就必須執行一些額外的步驟,然後才能使用升級的 [SQL Server]SQL Server執行個體:If you upgraded from SQL Server ExpressSQL Server Express, you must perform additional steps before you can use your upgraded instance of [SQL Server]SQL Server:

    • 在 Windows SCM 中啟用 [SQL Server]SQL Server Agent 服務。Enable the [SQL Server]SQL Server Agent service in Windows SCM.

    • 使用 [SQL Server]SQL Server 組態管理員來提供 [SQL Server]SQL Server Agent 服務帳戶。Provision the [SQL Server]SQL Server Agent service account by using [SQL Server]SQL Server Configuration Manager.

除了上述步驟以外,如果您是從 SQL Server ExpressSQL Server Express升級,可能必須進行下列動作:In addition to the steps above, you may need to do the following if you upgraded from SQL Server ExpressSQL Server Express:

  • SQL Server ExpressSQL Server Express 中提供的使用者會在升級之後維持已提供的狀態。Users that were provisioned in SQL Server ExpressSQL Server Express remain provisioned after the upgrade. 更明確地說,BUILTIN\Users 群組會維持已提供的狀態。Specifically, the BUILTIN\Users group remains provisioned. 您可以視需要停用、移除或重新提供這些帳戶。Disable, remove, or reprovision these accounts as needed. 如需詳細資訊,請參閱 設定 Windows 服務帳戶與權限For more information, see Configure Windows Service Accounts and Permissions.

  • tempdb 和 model 系統資料庫的大小和復原模式在升級之後會維持不變。Sizes and recovery mode for the tempdb and model system databases remain unchanged after the upgrade. 您可以視需要重新設定這些設定。Reconfigure these settings as needed. 如需詳細資訊,請參閱系統資料庫的備份與還原 (SQL Server)For more information, see Back Up and Restore of System Databases (SQL Server).

  • 範本資料庫在升級之後會保留在電腦上。Template databases remain on the computer after the upgrade.

另請參閱See Also

升級到 SQL Server 2014 Upgrade to SQL Server 2014
回溯相容性Backward Compatibility