RsReportServer.config 組態檔RsReportServer.config Configuration File

Reporting ServicesReporting ServicesRsReportServer.config 檔案會儲存報表伺服器 Web 服務和背景處理所使用的設定。The Reporting ServicesReporting ServicesRsReportServer.config file stores settings that are used by the Report Server Web service and background processing. 所有 Reporting ServicesReporting Services 應用程式都是在讀取 RSReportServer.config 檔中儲存之組態設定的單一處理序中執行。All Reporting ServicesReporting Services applications run within a single process that reads configuration settings stored in the RSReportServer.config file. 原生模式和 SharePoint 模式的報表伺服器都使用 RSReportServer.config,不過,這兩個模式不會使用組態檔中的所有相同設定。Both Native mode and SharePoint mode report servers use the RSReportServer.config, however the two modes do not use all of the same settings in the configuration file. SharePoint 模式版本的檔案較小,因為 SharePoint 模式的許多設定是儲存在 SharePoint 組態資料庫中,而不是檔案中。The SharePoint mode version of the file is smaller as many of the settings for SharePoint mode are stored in SharePoint configuration databases rather than the file. 本主題描述針對原生模式和 SharePoint 模式所安裝的預設組態檔,以及由組態檔控制的部分重要設定和行為。This topic describes the default configuration file that is installed for Native mode and SharePoint mode and some of the important settings and behaviors that are controlled by the configuration file.

在 SharePoint 模式中,組態檔包含套用至該電腦上執行之所有服務應用程式執行個體的設定。In SharePoint mode, the configuration file contains those settings that apply to all service application instances running on that computer. SharePoint 組態資料庫包含套用至特定服務應用程式的組態設定。The SharePoint configuration database contains configuration settings that apply to specific service applications. 儲存在組態資料庫中且透過 SharePoint 管理頁面管理的設定,可能因每個 Reporting ServicesReporting Services 服務應用程式而有所不同。The settings that are stored in the Configuration database and managed through the SharePoint management pages can be different for each Reporting ServicesReporting Services service application.

設定在下列內容中出現的順序,是依據預設安裝的組態檔中出現的順序而定。The settings are presented in following content in the order in which they appear in the configuration file that is installed by default. 如需如何編輯此檔案的指示,請參閱 修改 Reporting Services 組態檔 (RSreportserver.config)For instructions on how to edit this file, see Modify a Reporting Services Configuration File (RSreportserver.config).

檔案位置File Location

RSReportServer.config 位於下列資料夾,端視報表伺服器模式而定:The RSReportServer.config is located in the following folders, depending on the report server mode:

原生模式報表伺服器Native mode report server

適用於:APPLIES TO: 是SQL Server Reporting Services (2016)SQL Server Reporting Services (2016)適用於:APPLIES TO: 是SQL Server Reporting Services (2016)SQL Server Reporting Services (2016)

C:\Program Files\Microsoft SQL Server\MSRS13.MSSQLSERVER\Reporting Services\ReportServer  

適用於:APPLIES TO: 是Power BI 報表伺服器Power BI Report Server適用於:APPLIES TO: 是Power BI 報表伺服器Power BI Report Server

C:\Program Files\Microsoft SQL Server Reporting Services\RSServer\ReportServer

SharePoint 模式報表伺服器SharePoint mode report server

注意

SQL Server Reporting Services 中的 Power BI 報表 2017 年 1 月技術預覽未提供 SharePoint 整合模式。SharePoint integrated mode is not available with the January 2017 Technical Preview of Power BI reports in SQL Server Reporting Services.

C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\WebServices\Reporting  

如需編輯此檔案的詳細資訊,請參閱 修改 Reporting Services 組態檔 (RSreportserver.config)For more information on editing the file, see Modify a Reporting Services Configuration File (RSreportserver.config).

一般組態設定 (rsreportserver.config)General Configuration Settings (rsreportserver.config)

下表提供有關檔案第一個部分中顯示之一般組態設定的資訊。The following table provides information about general configuration settings that appear in the first part of the file. 設定會依其出現在組態檔的順序顯示。Settings are presented in the order in which they appear in the configuration file. 資料表的最後一個資料行會指出此設定適用於原生模式的報表伺服器 (N) 、SharePoint 模式的報表伺服器 (S) ,還是兩者。The last column of the table indicates if the setting applies to a Native mode report server (N) or a SharePoint mode report server (S) or both.

注意

在本主題中,「最大整數」是指 2147483647 的 INT_MAX 值。In this topic, "maximum integer" refers to INT_MAX value of 2147483647. 如需詳細資訊,請參閱整數限制 (https://msdn.microsoft.com/library/296az74e(v=vs.110).aspx) 。For more information, see Integer Limits (https://msdn.microsoft.com/library/296az74e(v=vs.110).aspx).

設定Setting DescriptionDescription [模式]Mode
DsnDsn 將連接字串指定給主控報表伺服器資料庫的資料庫伺服器。Specifies the connection string to the database server that hosts the report server database. 當您建立報表伺服器資料庫時,這個值會加密並加入至組態檔。This value is encrypted and is added to the configuration file when you create the report server database. 如果是 SharePoint,資料庫連接資訊會取自 SharePoint 組態資料庫。For SharePoint, the database connection information is taken from the SharePoint configuration database. N、SN,S
ConnectionTypeConnectionType 指定報表伺服器用於連接到報表伺服器資料庫的認證類型。Specifies the type of credentials that the report server uses to connect to the report server database. 有效值為 DefaultImpersonateValid values are Default and Impersonate. 如果將報表伺服器設定為使用登入或服務帳戶連接到報表伺服器資料庫,則會指定 Default SQL ServerSQL ServerDefault is specified if the report server is configured to use a SQL ServerSQL Server login or the service account to connect to the report server database. 如果報表伺服器是使用 Windows 帳戶連接到報表伺服器資料庫,則會指定ImpersonateImpersonate is specified if the report server uses a Windows account to connect to the report server database. NN
LogonUser, LogonDomain, LogonCredLogonUser, LogonDomain, LogonCred 儲存報表伺服器用於連接至報表伺服器資料庫所使用之網域帳戶的網域、使用者名稱和密碼。Stores the domain, user name, and password of a domain account that is used by a report server to connect to a report server database. 當報表伺服器連接設定使用網域帳戶時,會建立 LogonUserLogonDomainLogonCred 的值。Values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. 如需報表伺服器資料庫連接的詳細資訊,請參閱設定報表伺服器資料庫連接 (SSRS 組態管理員)For more information about a report server database connection, see Configure a Report Server Database Connection (SSRS Configuration Manager). NN
InstanceIDInstanceID 報表伺服器執行個體的識別碼。An identifier for the report server instance. 報表伺服器執行個體名稱以 SQL ServerSQL Server 執行個體名稱為基礎。Report server instance names are based on SQL ServerSQL Server instance names. 此值會指定 SQL ServerSQL Server 執行個體名稱。This value specifies a SQL ServerSQL Server instance name. 根據預設,這個值為 MSRS12<執行個體名稱> 。By default, this value is MSRS12<instancename>. 請勿修改此設定。Do not modify this setting. 以下為完整值的範例: <InstanceId>MSRS13.MSSQLSERVER</InstanceId>The following is an example of the complete value: <InstanceId>MSRS13.MSSQLSERVER</InstanceId>

以下是 SharePoint 模式的範例:The following is an example of SharePoint mode:

<InstanceId>MSRS12.@Sharepoint</InstanceId>
N、SN,S
InstallationIDInstallationID 安裝程式建立之報表伺服器安裝的識別碼。An identifier for the report server installation that Setup creates. 此值會設定為 GUID。This value is set to a GUID. 請勿修改此設定。Do not modify this setting. NN
SecureConnectionLevelSecureConnectionLevel 指定 Web 服務呼叫必須使用安全通訊端層 (SSL) 的程度。Specifies the degree to which Web service calls must us Secure Sockets Layer (SSL). 這項設定同時用於報表伺服器 Web 服務和入口網站。This setting is used for both the Report Server Web service and the web portal. 當您在 Reporting ServicesReporting Services 組態工具中設定使用 HTTP 或 HTTPS 的 URL 時,就會設定這個值。This value is set when you configure a URL to use HTTP or HTTPS in the Reporting ServicesReporting Services Configuration tool. 在 SQL Server 2008 R2 中,SecureConnectionLevel 會變成 on/off 開關。In SQL Server 2008 R2, SecureConnectionLevel is made an on/off switch. 對於 SQL Server 2008 R2 之前的版本,有效值範圍是從 0 到 3,其中 0 是最不安全的值。For earlier versions than SQL Server 2008 R2 the valid values range are from 0 through 3, where 0 is least secure. 如需詳細資訊,請參閱 ConfigurationSetting 方法 - SetSecureConnectionLevel使用安全的 Web 服務方法在原生模式報表伺服器上設定 SSL 連線For more information, see ConfigurationSetting Method - SetSecureConnectionLevel, Using Secure Web Service Methods and Configure SSL Connections on a Native Mode Report Server. N、SN,S
DisableSecureFormsAuthenticationCookieDisableSecureFormsAuthenticationCookie 預設值為 False。Default value is False.

指定是否停用強制將表單和自訂驗證所使用的 Cookie 標記為安全。Specifies whether to disable the forcing of the cookie used for form and custom authentication to be marked secure. 從 SQL Server 2012 開始, Reporting ServicesReporting Services 會自動將搭配自訂驗證延伸模組所使用的表單驗證 Cookie (在傳送給用戶端時) 標示為安全 Cookie。Starting with SQL Server 2012, Reporting ServicesReporting Services will automatically mark forms authentication cookies used with custom authentication extensions, as a secure cookie when sent to the client. 藉由變更這個屬性,報表伺服器管理員和自訂安全性延伸模組作者可以還原成之前的行為,該行為可讓自訂安全性延伸模組作者判斷是否將 Cookie 標示為安全 Cookie。By changing this property, report server administrators and custom security extension authors can revert to the previous behavior which allowed the custom security extension author to determine whether to mark the cookie as a secure cookie. 建議針對表單驗證使用安全 Cookie,以防止網路探查和重新執行攻擊。It is recommended that secure cookies are used for forms authentication to help prevent network sniffing and replay attacks.
NN
CleanupCycleMinutesCleanupCycleMinutes 指定一個時限 (分鐘),超過此時限後,舊有的工作階段和過期的快照集,便會從報表伺服器資料庫中移除。Specifies the number of minutes after which old sessions and expired snapshots are removed from the report server databases. 有效值範圍是從 0 到最大整數。Valid values range from 0 to maximum integer. 預設值是 10。The default is 10. 將值設定為 0,則會停用資料庫清除處理序。Setting the value to 0 disables the database clean up the process. N、SN,S
MaxActiveReqForOneUserMaxActiveReqForOneUser 指定一個使用者同時可以處理的報表最大數目。Specifies the maximum number of reports that one user can process at the same time. 一旦達到限制,系統就會拒絕進一步的報表處理要求。Once the limit is reached, further report processing requests are denied. 有效值為 1 到最大整數。Valid values are 1 to a maximum integer. 預設值是 20。The default is 20.

請注意,大部分要求的處理速度很快,因此單一使用者不太可能同時擁有 20 個以上的開啟連接。Note that most requests process very quickly so it is unlikely that a single user will have more than 20 open connections at any given time. 如果使用者同時開啟超過 15 個密集處理的報表,您可能需要增加此值。If users are opening more than 15 process-intensive reports at the same time, you might need to increase this value.

以 SharePoint 整合模式執行的報表伺服器會忽略這項設定。This setting is ignored for report servers that run in SharePoint integrated mode.
N、SN,S
MaxActiveReqForAnonymousMaxActiveReqForAnonymous 指定可同時處理的匿名要求數目上限。Specifies the maximum number of anonymous requests that can be in process at the same time. 達到限制之後,系統就會拒絕進一步的處理要求。Once the limit is reached, further processing requests are denied. 有效值為 1 到最大整數。Valid values are 1 to a maximum integer. 預設值是 200。The default is 200.
DatabaseQueryTimeoutDatabaseQueryTimeout 指定一個時限 (秒),超過此時限後,與報表伺服器資料庫的連接便會逾時。此值傳遞至 System.Data.SQLClient.SQLCommand.CommandTimeout 屬性。Specifies the number of seconds after which a connection to the report server database times out. This value is passed to the System.Data.SQLClient.SQLCommand.CommandTimeout property. 有效值的範圍為 0 到 2147483647。Valid values range from 0 to 2147483647. 預設值是 120。The default is 120. 值為 0 會指定無限等候時間,因此不建議您這樣做。A value of 0 specifies an unlimited wait time and therefore is not recommended. NN
AlertingCleanupCycleMinutesAlertingCleanupCycleMinutes 預設值是 20。The default is 20.

判斷清除在警示資料庫中儲存之暫存資料的頻率。Determines how often the clean up of temporary data stored in the Alerting database occurs.
SS
AlertingDataCleanupMinutesAlertingDataCleanupMinutes 預設值是 360。The default is 360.

判斷用於建立或編輯警示定義的工作階段資料會在警示資料庫內保留多久。Determines how long session data used for creating or editing an alert definition is retained within the Alerting database. 預設為 6 小時。Default is 6 hours.
SS
AlertingExecutionLogCleanupMinutesAlertingExecutionLogCleanupMinutes 預設值是 10080。The default is 10080.

判斷要保留警示執行記錄值多久。Determines how long to keep Alerting execution log values. 預設值為 7 天。Default is 7 days.
SS
AlertingMaxDataRetentionDaysAlertingMaxDataRetentionDays 預設值是 180。The default is 180.

判斷在警示的資料尚未變更時,要保留必要的警示資料多久來避免重複的警示訊息。Determines how long to keep alert data required to prevent duplicate alert messages when the data for the alert has not changed.
SS
RunningRequestsScavengerCycleRunningRequestsScavengerCycle 指定取消遺棄與過期要求的頻率。Specifies how often orphaned and expired requests are canceled. 此指定值的單位是秒。This value is specified in seconds. 有效值範圍是從 0 到最大整數。Valid values range from 0 to maximum integer. 預設值是 60。The default is 60. N、SN,S
RunningRequestsDbCycleRunningRequestsDbCycle 指定報表伺服器評估執行中作業,以檢查作業是否超過報表執行逾時的頻率,以及何時在入口網站的 [管理作業] 頁面中,顯示執行中作業的資訊。Specifies how often the report server evaluates running jobs to check whether they have exceeded report execution time outs, and when to present running job information in the Manage Jobs page of the web portal. 此指定值的單位是秒。This value is specified in seconds. 有效值的範圍為 0 到 2147483647。Valid values range from 0 to 2147483647. 預設值是 60。The default is 60. N、SN,S
RunningRequestsAgeRunningRequestsAge 指定間隔秒數,超過此秒數後,執行中作業的狀態便會從新作業變更成執行中作業。Specifies an interval in seconds after which the status of a running job changes from new to running. 有效值的範圍為 0 到 2147483647。Valid values range from 0 to 2147483647. 預設值是 30。The default is 30. N、SN,S
MaxScheduleWaitMaxScheduleWait 指定要求 SQL ServerSQL Server [下次執行時間] 時,報表伺服器 Windows 服務等候 Agent 服務更新排程的秒數。Specifies the number of seconds the Report Server Windows service waits for a schedule to be updated by SQL ServerSQL Server Agent service when Next Run Time is requested. 有效值的範圍從 1 到 60。Valid values range from 1 to 60.

在預設組態檔中,MaxScheduleWait 會設為 5In the default configuration file, MaxScheduleWait is set to 5.

如果報表伺服器找不到或無法讀取組態檔,則伺服器會將 MaxScheduleWait 預設為 1。If the report server cannot find or read the configuration file, the server defaults MaxScheduleWait to 1.
N、SN,S
DisplayErrorLinkDisplayErrorLink 指出錯誤發生時,是否顯示「 MicrosoftMicrosoft 說明及支援」網站的連結。Indicates whether a link to the MicrosoftMicrosoft Help and Support site is displayed when errors occur. 此連結出現在錯誤訊息中。This link appears in error messages. 使用者可以按一下此連結,以便開啟網站上的更新錯誤訊息內容。Users can click the link to open updated error message content on the site. 有效值包括 True (預設值) 和 FalseValid values include True (default) and False. N、SN,S
WebServiceuseFileShareStorageWebServiceuseFileShareStorage 指定是否將快取報表與暫存快照集 (報表伺服器 Web 服務為使用者工作階段持續時間所建立的),儲存在檔案系統上。Specifies whether to store cached reports and temporary snapshots (created by the Report Server Web service for the duration of a user session) on the file system. 有效值為 TrueFalse (預設值)。Valid values are True and False (default). 如果此值設定為 false,暫存資料會儲存在 reportservertempdb 資料庫中。If the value is set to false, temporary data is stored in the reportservertempdb database. N、SN,S
WatsonFlagsWatsonFlags 指定針對向 MicrosoftMicrosoft報告的錯誤狀況要記錄多少資訊。Specifies how much information is logged for error conditions that are reported to MicrosoftMicrosoft.

0x0430 = 完整傾印0x0430 = a full dump

0x0428 = 迷你傾印0x0428 =a minidump

0x0002 = 無傾印0x0002 = no dump
N、SN,S
WatsonDumpOnExceptionsWatsonDumpOnExceptions 指定您想要在錯誤記錄檔中報告的例外狀況清單。Specifies a list of exceptions that you want to report in an error log. 這在您有重複發生的問題,而且想要利用傳送到 MicrosoftMicrosoft 進行分析的資訊建立傾印時相當實用。This is useful when you have a recurring issue and want to create a dump with information to send to MicrosoftMicrosoft for analysis. 建立傾印會影響效能,因此只有在診斷問題時,才能變更這個設定。Creating dumps affects performance, so change this setting only when you are diagnosing a problem. N、SN,S
WatsonDumpExcludeIfContainsExceptionsWatsonDumpExcludeIfContainsExceptions 指定您不想要在錯誤記錄檔中報告的例外狀況清單。Specifies a list of exceptions that you do not want to report in an error log. 這在您要診斷問題,而且不想讓伺服器建立特定例外的傾印時相當實用。This is useful when you are diagnosing a problem and do not want the server to create dumps for a specific exception. N、SN,S

URLReservations (RSReportServer.config 檔)URLReservations (RSReportServer.config file)

URLReservations 會針對目前的執行個體,定義報表伺服器 Web 服務及入口網站的 HTTP 存取。URLReservations defines HTTP access to the Report Server Web service and the web portal for the current instance. 當您設定報表伺服器時,URL 會保留並儲存在 HTTP.SYS 中。URLs are reserved and stored in HTTP.SYS when you configure the report server.

警告

如果是 SharePoint 模式,便會在 SharePoint 管理中心設定 URL 保留項目。For SharePoint mode, URL reservations are configured in SharePoint Central Administration. 如需詳細資訊,請參閱設定備用存取對應(https://technet.microsoft.com/library/cc263208(office.12).aspx)For more information, see Configure alternate access mapping (https://technet.microsoft.com/library/cc263208(office.12).aspx).

請勿直接修改組態檔中的 URL 保留項目。Do not modify URL reservations in the configuration file directly. 請務必使用 Reporting ServicesReporting Services 組態管理員或報表伺服器 WMI 提供者建立或修改原生模式報表伺服器的 URL 保留項目。Always use the Reporting ServicesReporting Services Configuration Manager or the Report Server WMI provider to create or modify URL reservations for a Native mode report server. 如果您修改組態檔中的值,可能會損毀保留項目,因而導致執行階段發生伺服器錯誤,或將解除安裝本軟體時不會移除的遺棄保留項目留在 HTTP.SYS 中。If you modify the values in the configuration file, you might corrupt the reservation, which will cause server errors at run time or leave orphan reservations in HTTP.SYS that are not removed if you uninstall the software. 如需詳細資訊,請參閱設定報表伺服器 URL (SSRS 組態管理員)組態檔中的 URL (SSRS 組態管理員)For more information, see Configure Report Server URLs (SSRS Configuration Manager) and URLs in Configuration Files (SSRS Configuration Manager).

URLReservations 是選擇性項目。URLReservations is an optional element. 如果它不存在 RSReportServer.config 檔中,表示伺服器可能尚未設定。If it is not present in the RSReportServer.config file, the server might not be configured. 如果您指定了此項目,就需要 AccountName 以外的所有子項目。If it is specified, all child elements except for AccountName are required.

資料表的最後一個資料行會指出此設定適用於原生模式的報表伺服器 (N)、SharePoint 模式的報表伺服器 (S),還是兩者。The last column of the table indicates if the setting applies to a Native mode report server (N) or a SharePoint mode report server (S) or both.

設定Setting DescriptionDescription [模式]Mode
應用程式Application 包含 Reporting ServicesReporting Services 應用程式的設定。Contains settings for Reporting ServicesReporting Services applications. NN
名稱Name 指定 Reporting ServicesReporting Services 應用程式。Specifies the Reporting ServicesReporting Services applications. 有效值為 ReportServerWebService 或 ReportManager。Valid values are ReportServerWebService or ReportManager. NN
VirtualDirectoryVirtualDirectory 指定應用程式的虛擬目錄名稱。Specifies the virtual directory name of the application. NN
URLURLs, URL 包含應用程式的一或多個 URL 保留項目。Contains one or more URL reservations for the application. NN
UrlStringUrlString 指定適用於 HTTP.SYS 的 URL 語法。Specifies URL syntax that is valid for HTTP.SYS. 如需語法的詳細資訊,請參閱 URL 保留項目語法 (SSRS 組態管理員)For more information about the syntax, see URL Reservation Syntax (SSRS Configuration Manager). NN
AccountSidAccountSid 指定建立保留的 URL 時使用之帳戶的安全性識別碼 (SID)。Specifies the security identifier (SID) of the account for which the URL reservation was created. 這應該是報表伺服器服務執行時使用的帳戶。This should be the account under which the Report Server service runs. 如果 SID 與服務帳戶不符,報表伺服器可能就無法接聽該 URL 的要求。If the SID does not match the service account, the report server might not be able to listen for requests on that URL. NN
AccountNameAccountName 指定對應至 AccountSid的可讀取帳戶名稱。Specifies a readable account name that corresponds to the AccountSid. 雖然系統不會使用此設定,但是它會顯示在檔案中,讓您可以輕易地判斷用於 URL 保留項目的帳戶。It is not used, but it appears in the file so that you can easily determine the service account for the account that is used for URL reservation. NN

Authentication (RSReportServer.config 檔)Authentication (RSReportServer.config file)

Authentication 會指定報表伺服器所接受的一個或多個驗證類型。Authentication specifies one or more authentication types accepted by the report server. 預設設定和預設值是這個區段可用之設定和值的子集。The default settings and values are a subset of the settings and values that are possible for this section. 只有預設設定會自動加入。Only the default settings are added automatically. 若要加入其他設定,您必須使用文字編輯器,將元素結構加入至 RSReportServer.config 檔,然後設定其值。To add other settings, you must use a text editor to add the element structure to the RSReportServer.config file and set the values.

預設值包括 RSWindowsNegotiateEnableAuthPersistance 設為 TrueRSWindowsNTLMDefault values include RSWindowsNegotiate and RSWindowsNTLM with EnableAuthPersistance set to True:

   <Authentication>  
      <AuthenticationTypes>  
         <RSWindowsNegotiate/>  
         <RSWindowsNTLM/>  
      </AuthenticationTypes>  
      <EnableAuthPersistence>true</EnableAuthPersistence>  
   </Authentication>  

所有其他值都必須手動加入。All other values must be added manually. 如需詳細資訊和範例,請參閱 使用報表伺服器驗證For more information and examples, see Authentication with the Report Server.

下表的最後一個資料行會指出此設定適用於原生模式的報表伺服器 (N)、SharePoint 模式的報表伺服器 (S),還是兩者。The last column of the following table indicates if the setting applies to a Native mode report server (N) or a SharePoint mode report server (S) or both.

設定Setting DescriptionDescription [模式]Mode
AuthenticationTypesAuthenticationTypes 指定一或多種驗證類型。Specifies one or more authentication types. 有效值為: RSWindowsNegotiateRSWindowsKerberosRSWindowsNTLMRSWindowsBasicCustomValid values are: RSWindowsNegotiate, RSWindowsKerberos, RSWindowsNTLM, RSWindowsBasic, and Custom.

RSWindows 類型和 Custom 互斥。RSWindows types and Custom are mutually exclusive.

RSWindowsNegotiateRSWindowsKerberosRSWindowsNTLMRSWindowsBasic 是累計的,而且可以一起使用,如本節前面的預設值範例所示。RSWindowsNegotiate, RSWindowsKerberos, RSWindowsNTLM, and RSWindowsBasic are cumulative and can be used together, as illustrated in the default value example earlier in this section.

如果您預期會收到來自各種使用不同驗證類型之用戶端應用程式或瀏覽器的要求,指定多種驗證類型就是必要的做法。Specifying multiple authentication types is necessary if you expect requests from a variety of client applications or browsers that use different types of authentication.

請勿移除 RSWindowsNTLM,否則瀏覽器支援會限制在部分支援的瀏覽器類型。Do not remove RSWindowsNTLM, otherwise you will limit browser support to a portion of the supported browser types. 如需詳細資訊,請參閱 Reporting Services 和 Power View 的瀏覽器支援For more information, see Browser Support for Reporting Services and Power View.
NN
RSWindowsNegotiateRSWindowsNegotiate 報表伺服器接受 Kerberos 或 NTLM 安全性 Token。The report server accepts either Kerberos or NTLM security tokens. 當報表伺服器在原生模式下執行,而且服務帳戶為網路服務時,此為預設值。This is the default setting when the report server is running in native mode and the service account is Network Service. 當報表伺服器在原生模式下執行,而且服務帳戶設定成網域使用者帳戶時,會省略此設定。This setting is omitted when the report server is running in native mode and the service account is configured as a domain user account.

如果網域帳戶設定成報表伺服器服務帳戶,而且服務主要名稱 (SPN) 未設定成報表伺服器,此設定可能會防止使用者登入伺服器。If a domain account is configured for the Report Server Service account and a Service Principle Name (SPN) is not configured for the report server, this setting might prevent users from logging on to the server.
NN
EnableAuthPersistanceRSWindowsNTLM 伺服器接受 NTLM 安全性 Token。The server accepts NTLM security tokens.

如果您移除此設定,瀏覽器支援會受到某些支援之瀏覽器類型的限制。If you remove this setting, browser support will be limited for some of the supported browser types. 如需詳細資訊,請參閱 Reporting Services 和 Power View 的瀏覽器支援For more information, see Browser Support for Reporting Services and Power View.
N、SN, S
RSWindowsKerberosRSWindowsKerberos 伺服器接受 Kerberos 安全性 Token。The server accepts Kerberos security tokens.

當您在限制委派驗證配置中使用 Kerberos 驗證時,請使用此設定或 RSWindowsNegotiate。Use this setting or RSWindowsNegotiate when you use Kerberos authentication in a constrained delegation authentication scheme.
NN
RSWindowsBasicRSWindowsBasic 不使用認證建立連線時,伺服器會接受基本認證並發出挑戰/回應。The server accepts Basic credentials and issues a challenge/response when a connection is made without credentials.

基本驗證會以清楚的文字,將認證傳入 HTTP 要求中。Basic authentication passes credentials in the HTTP requests in clear text. 如果您使用基本驗證,請使用 SSL 加密進出報表伺服器的網路流量。If you use Basic authentication, use SSL to encrypt network traffic to and from the report server. 若要檢視 Reporting ServicesReporting Services中基本驗證的範例組態語法,請參閱 使用報表伺服器驗證To view example configuration syntax for Basic authentication in Reporting ServicesReporting Services, see Authentication with the Report Server.
NN
CustomCustom 如果您在報表伺服器電腦上部署了自訂安全性延伸模組,請指定這個值。Specify this value if you deployed a custom security extension on the report server computer. 如需詳細資訊,請參閱< Implementing a Security Extension>。For more information, see Implementing a Security Extension. NN
LogonMethodLogonMethod 這個值會指定 RSWindowsBasic的登入類型。This value specifies the logon type for RSWindowsBasic. 如果您指定了 RSWindowsBasic,這個值就是必要項目。If you specify RSWindowsBasic, this value is required. 有效值為 2 或 3,其中每個值代表下列項目:Valid values are 2 or 3, where each value represents the following:

2 = 網路登入,用於驗證純文字密碼的高效能伺服器2 = Network logon high performance servers to authenticate plaintext passwords

3 = 純文字登入,可將登入認證保存在隨著每個 HTTP 要求傳送的驗證封裝中,以便在連接至網路中的其他伺服器時,允許伺服器模擬使用者。3 = Cleartext logon, which preserves logon credentials in the authentication package that is sent with each HTTP request, allowing the server to impersonate the user when connecting to other servers in the network.



注意: SQL Server 2016 Reporting Services 或更新版本 (SSRS)SQL Server 2016 Reporting Services or later (SSRS)中不支援值 0 (用於互動式登入) 和 1 (用於批次登入)。Note: Values 0 (for interactive logon) and 1 (for batch logon) are not supported in SQL Server 2016 Reporting Services 或更新版本 (SSRS)SQL Server 2016 Reporting Services or later (SSRS).
NN
RealmRealm 這個值是用於 RSWindowsBasicThis value is used for RSWindowsBasic. 它會指定資源分割區,其中包含用於控制組織中受保護資源之存取權的授權和驗證功能。It specifies a resource partition that includes authorization and authentication features used to control access to protected resources in your organization. NN
DefaultDomainDefaultDomain 這個值是用於 RSWindowsBasicThis value is used for RSWindowsBasic. 它可用於決定伺服器用以驗證使用者的網域。It is used to determine the domain used by the server to authenticate the user. 雖然這個值是選擇性的,但是如果您省略它,報表伺服器將使用電腦名稱當做網域。This value is optional, but if you omit it the report server will use the computer name as the domain. 如果您在網域控制站上安裝了報表伺服器,則使用的網域就是電腦所控制的網域。If you installed the report server on a domain controller, the domain used is the one controlled by the computer. NN
RSWindowsExtendedProtectionLevelRSWindowsExtendedProtectionLevel 預設值是 offThe Default value is off. 如需詳細資訊,請參閱< Extended Protection for Authentication with Reporting ServicesFor more information, see Extended Protection for Authentication with Reporting Services NN
RSWindowsExtendedProtectionScenarioRSWindowsExtendedProtectionScenario The default value is Proxy NN
EnableAuthPersistenceEnableAuthPersistence 決定要在連接時或針對每個要求執行驗證。Determines whether authentication is performed on the connection or for every request.

有效值為 True (預設值) 或 FalseValid values are True (default) or False. 如果設定為 True,來自相同連接的後續要求就會採用第一個要求的模擬內容。If set to True, subsequent requests from the same connection assume the impersonation context of the first request.

如果您正使用 Proxy 伺服器軟體 (例如 ISA Server) 來存取報表伺服器,這個值就必須設定為 FalseThis value must be set to False if you are using proxy server software (such as ISA Server) to access the report server. 使用 Proxy 伺服器可讓多位使用者使用 Proxy 伺服器的單一連接。Using a proxy server allows a single connection from the proxy server to be used by multiple users. 在這個狀況中,您應該停用驗證持續性機制,以便個別驗證每個使用者要求。For this scenario, you should disable authentication persistence so that each user request can be authenticated separately. 如果您沒有將 EnableAuthPersistence 設定為 False,則所有使用者都將使用第一個要求的模擬內容來進行連接。If you do not set EnableAuthPersistence to False, all users will connect using the impersonation context of the first request.
N、SN,S

Service (RSReportServer.config 檔)Service (RSReportServer.config file)

Service 會指定以整體方式套用至服務的應用程式設定。Service specifies the application settings that apply to the service as a whole.

下表的最後一個資料行會指出此設定適用於原生模式的報表伺服器 (N)、SharePoint 模式的報表伺服器 (S),還是兩者。The last column of the following table indicates if the setting applies to a Native mode report server (N) or a SharePoint mode report server (S) or both.

設定Setting DescriptionDescription [模式]Mode
IsSchedulingServiceIsSchedulingService 指定報表伺服器是否要維護一組對應到 SQL ServerSQL Server 使用者所建立之排程與訂閱的 Reporting ServicesReporting Services Agent 作業。Specifies whether the report server maintains a set of SQL ServerSQL Server Agent jobs that correspond to schedules and subscriptions created by Reporting ServicesReporting Services users. 有效值包括 True (預設值) 和 FalseValid values include True (default) and False.

當您使用原則式管理的 [Reporting Services 的介面區組態] Facet 來啟用或停用 Reporting ServicesReporting Services 功能時,這個設定會受到影響。This setting is affected when you enable or disable Reporting ServicesReporting Services features using the Surface Area Configuration for Reporting Services facet of Policy-Based Management. 如需詳細資訊,請參閱 啟動與停止報表伺服器服務For more information, see Start and Stop the Report Server Service.
N、SN,S
IsNotificationServiceIsNotificationService 指定報表伺服器是否處理通知和傳遞。Specifies whether the report server processing notifications and deliveries. 有效值包括 True (預設值) 和 FalseValid values include True (default) and False. 當值為 False時,不會傳遞訂閱。When the value is False, subscriptions are not delivered.

當您使用原則式管理的 [Reporting Services 的介面區組態] Facet 來啟用或停用 Reporting ServicesReporting Services 功能時,這個設定會受到影響。This setting is affected when you enable or disable Reporting ServicesReporting Services features using the Surface Area Configuration for Reporting Services facet of Policy-Based Management. 如需詳細資訊,請參閱 啟動與停止報表伺服器服務For more information, see Start and Stop the Report Server Service.
N、SN,S
IsEventServiceIsEventService 指定服務處理序事件是否位於事件佇列中。Specifies whether service processes events in the event queue. 有效值包括 True (預設值) 和 FalseValid values include True (default) and False. 當值為 False時,報表伺服器不會執行排程或訂閱的作業。When the value is False, the report server does not perform operations for schedules or subscriptions.

當您使用原則式管理的 [Reporting Services 的介面區組態] Facet 來啟用或停用 Reporting ServicesReporting Services 功能時,這個設定會受到影響。This setting is affected when you enable or disable Reporting ServicesReporting Services features using the Surface Area Configuration for Reporting Services facet of Policy-Based Management. 如需詳細資訊,請參閱 啟動與停止報表伺服器服務For more information, see Start and Stop the Report Server Service.
N、SN,S
IsAlertingServiceIsAlertingService 預設值為 TrueThe default value is True SS
PollingIntervalPollingInterval 指定報表伺服器之事件資料表輪詢的間隔 (以秒計)。Specifies the interval, in seconds, between polls of the event table by the report server. 有效值範圍是從 0 到最大整數。Valid values range from 0 to maximum integer. 預設值是 10。The default is 10. N、SN,S
WindowsServiceUseFileShareStorageWindowsServiceUseFileShareStorage 指定是否將快取報表與暫存快照集 (報表伺服器服務為使用者工作階段持續時間所建立) 儲存在檔案系統上。Specifies whether to store cached reports and temporary snapshots (created by the Report Server service for the duration of a user session) on the file system. 有效值為 TrueFalse (預設值)。Valid values are True and False (default). N、SN,S
MemorySafetyMarginMemorySafetyMargin 指定 WorkingSetMaximum 的百分比,以便定義中度與低度壓力狀況之間的界限。Specifies a percentage of WorkingSetMaximum that defines the boundary between medium and low pressure scenarios. 預設值是 80。The default value is 80. 如需 WorkingSetMaximum 和設定可用記憶體的詳細資訊,請參閱 設定報表伺服器應用程式的可用記憶體For more information about WorkingSetMaximum and configuring available memory, see Configure Available Memory for Report Server Applications. N、SN,S
MemoryThresholdMemoryThreshold 指定 WorkingSetMaximum 的百分比,以便定義高度與中度壓力狀況之間的界限。Specifies a percentage of WorkingSetMaximum that defines the boundary between high and medium pressure scenarios. 預設值是 90The default value is 90. 此值應該大於針對 MemorySafetyMargin所設定的值。This value should be greater than the value set for MemorySafetyMargin. 如需詳細資訊,請參閱 設定報表伺服器應用程式的可用記憶體For more information, see Configure Available Memory for Report Server Applications. N、SN,S
RecycleTimeRecycleTime 指定應用程式網域的回收時間,以分鐘測量。Specifies a recycle time for the application domain, measured in minutes. 有效值範圍是從 0 到最大整數。Valid values range from 0 to maximum integer. 預設值是 720。The default is 720. N、SN,S
MaxAppDomainUnloadTimeMaxAppDomainUnloadTime 指定在回收作業過程中,允許應用程式網域卸載的時間間隔。Specifies an interval during which the application domain is allowed to unload during a recycle operation. 如果回收未在此時間週期內完成,應用程式網域中的所有處理都會停止。If recycling does not complete during this time period, all processing in the application domain is stopped. 如需詳細資訊,請參閱< Application Domains for Report Server Applications>。For more information, see Application Domains for Report Server Applications.

此值的單位是分鐘。This value is specified in minutes. 有效值範圍是從 0 到最大整數。Valid values range from 0 to maximum integer. 預設值是 30The default is 30.
N、SN,S
MaxQueueThreadsMaxQueueThreads 指定報表伺服器 Windows 服務用於同時處理訂閱和通知的執行緒數目。Specifies the number of threads used by the Report Server Windows service for concurrent processing of subscriptions and notifications. 有效值範圍是從 0 到最大整數。Valid values range from 0 to maximum integer. 預設值是 0。The default is 0. 如果您選擇 0,則報表伺服器會決定最大的執行緒數目。If you choose 0, the report server determines the maximum number of threads. 如果您指定整數,您所指定的值會設定一次可以建立的執行緒數目上限。If you specify an integer, the value you specify sets the upper limit on threads that can be created at one time. 如需報表伺服器 Windows 服務如何管理記憶體來執行處理的詳細資訊,請參閱 設定報表伺服器應用程式的可用記憶體For more information about how the Report Server Windows service manages memory for running processes, see Configure Available Memory for Report Server Applications. N、SN,S
UrlRootUrlRoot 報表伺服器傳遞延伸模組所使用,用於撰寫以電子郵件和檔案共用訂閱傳遞之報表所使用的 URL。Used by the report server delivery extensions to compose URLs that are used by reports delivered in e-mail and file share subscriptions. 此值必須是可從中存取已發行報表之報表伺服器的有效 URL 位址。The value must be a valid URL address to the report server from which the published report is accessed. 報表伺服器所使用,用於產生離線或自動存取的 URL。Used by the report server to generate URLs for offline or unattended access. 這些 URL 會在匯出的報表中,由傳遞延伸模組所使用,用於撰寫包含在傳遞訊息中的 URL,例如電子郵件中的連結。These URLs are used in exported reports, and by delivery extensions to compose a URL that is included in delivery messages such as links in e-mails. 報表伺服器會根據下列行為,決定報表中的 URL:The report server determines URLs in reports based on the following behavior:

UrlRoot 是空的 (預設值),而且有 URL 保留項目時,報表伺服器會自動以針對 ListReportServerUrls 方法產生 URL 的相同方式決定 URL。When UrlRoot is blank (the default value) and there are URL reservations, the report server automatically determines URLs the same way that URLs are generated for the ListReportServerUrls method. 系統會使用 ListReportServerUrls 方法所傳回第一個 URL。The first URL returned by the ListReportServerUrls method is used. 或者,如果 SecureConnectionLevel 大於零 (0),則會使用第一個 SSL URL。Or, if SecureConnectionLevel is greater than zero (0), the first SSL URL is used.

UrlRoot 設定為特定的值時,系統會使用明確值。When UrlRoot is set to a specific value, the explicit value is used.

UrlRoot 是空的,而且沒有設定任何 URL 保留項目時,轉譯報表與電子郵件連結中的 URL 會不正確。When UrlRoot is blank and there are no URL reservations configured, the URLs in rendered reports and in e-mail links are incorrect.
N、SN,S
UnattendedExecutionAccountUnattendedExecutionAccount 指定報表伺服器為執行報表所使用的使用者名稱、密碼和網域。Specifies a user name, password, and domain used by the report server to run a reports. 這些值經過加密。These values are encrypted. 使用 Reporting ServicesReporting Services 組態工具或 rsconfig 公用程式即可設定這些值。Use the Reporting ServicesReporting Services Configuration tool or the rsconfig utility to set these values. 如需詳細資訊,請參閱設定自動執行帳戶 (SSRS 組態管理員)For more information, see Configure the Unattended Execution Account (SSRS Configuration Manager).

SharePoint 模式中,您集合執行帳戶的 Reporting ServicesReporting Services 服務應用程式使用 SharePoint 集中管理。For SharePoint mode, you set the execution account for a Reporting ServicesReporting Services service application using SharePoint Central Administration. 如需詳細資訊,請參閱 管理 Reporting Services SharePoint 服務應用程式For more information, see Manage a Reporting Services SharePoint Service Application
NN
PolicyLevelPolicyLevel 指定安全性原則組態檔。Specifies the security policy configuration file. 有效的值為 Rssrvrpolicy.config。如需詳細資訊,請參閱< Using Reporting Services Security Policy Files>。The valid value is Rssrvrpolicy.config. For more information, see Using Reporting Services Security Policy Files. N、SN,S
IsWebServiceEnabledIsWebServiceEnabled 指定報表伺服器 Web 服務是否回應 SOAP 與 URL 存取要求。Specifies whether the Report Server Web service responds to SOAP and URL access requests. 當您使用原則型式管理的 [Reporting Services 的介面區組態] Facet 來啟用或停用服務時,將會設定這個值。This value is set when you enable or disable service using the Surface Area Configuration for Reporting Services facet of Policy-Based Management. N、SN,S
IsReportManagerEnabledIsReportManagerEnabled 此設定已在 SQL Server 2016 Reporting Services 累積更新 2 之後淘汰。This setting has been deprecated as of SQL Server 2016 Reporting Services Cumulative Update 2. 入口網站會一律啟用。The web portal will always be enabled. NN
FileShareStorageLocationFileShareStorageLocation 指定檔案系統上儲存暫存快照集的單一資料夾。Specifies a single folder on the file system for storing temporary snapshots. 雖然您可以將資料夾路徑指定為 UNC 路徑,但是不建議您這麼做。Although you can specify the folder path as a UNC path, doing so is not recommended. 預設值為空白。The default value is empty.

<FileShareStorageLocation>

<Path>

</Path>

</FileShareStorageLocation>
N、SN,S
IsRdceEnabledIsRdceEnabled 指定是否啟用報表定義自訂延伸模組 (RDCE)。Specifies whether Report Definition Customization Extension (RDCE) is enabled. 有效值為 TrueFalseValid values are True and False. N、SN,S

UI (RSReportServer.config 檔)UI (RSReportServer.config file)

UI 會指定套用至入口網站應用程式的組態設定。UI specifies configuration settings that apply to the web portal application.

下表的最後一個資料行會指出此設定適用於原生模式的報表伺服器 (N)、SharePoint 模式的報表伺服器 (S),還是兩者。The last column of the following table indicates if the setting applies to a Native mode report server (N) or a SharePoint mode report server (S) or both.

設定Setting DescriptionDescription [模式]Mode
ReportServerUrlReportServerUrl 指定入口網站對其建立連線的報表伺服器 URL。Specifies the URL of the report server that the web portal connects to. 只有當您要將入口網站設定成連接線另一個執行個體或遠端電腦中的報表伺服器時,才應該修改這個值。Only modify this value if you are configuring the web portal to connect to a report server in another instance or on a remote computer. N、SN,S
ReportBuilderTrustLevelReportBuilderTrustLevel 請勿修改這個值,因為它是無法設定的。Do not modify this value; it is not configurable. SQL Server 2008SQL Server 2008 Reporting ServicesReporting Services 和更新版本中,報表產生器只能以 FullTrust執行。In SQL Server 2008SQL Server 2008 Reporting ServicesReporting Services and later versions, Report Builder runs only in FullTrust. 如需停用部分信任模式的詳細資訊,請參閱 SQL Server 2016 中 SQL Server Reporting Services 已停止的功能For more information about discontinuing partial trust mode, see Discontinued Functionality to SQL Server Reporting Services in SQL Server 2016. N、SN,S
PageCountModePageCountMode (僅適用於入口網站) 這項設定會指定報表伺服器要在轉譯報表之前或檢視報表時計算頁面計數值。For the web portal only, this setting specifies whether the report server calculates a page count value before the report is rendered, or as the report is viewed. 有效值為 Estimate (預設值) 和 ActualValid values are Estimate (default) and Actual. 在使用者檢視報表時,請使用 Estimate 來計算頁面計數資訊。Use Estimate to calculate page count information as the user views the report. 起初,頁面計數設定為 2 (代表目前的頁面加上一個額外頁面),但是會隨著使用者在報表中逐次翻頁而向上調整。Initially, the page count is set to 2 (for the current page plus one additional page), but adjusts upwards as the user pages through the report. 如果您想要在顯示報表之前預先計算頁面計數,請使用 ActualUse Actual if you want to calculate page count in advance before the report is displayed. 提供Actual 的目的,是為了與舊版相容。Actual is provided for backward compatibility. 請注意,如果您將 PageCountMode 設定為 Actual,則系統必須處理整份報表才能取得有效的頁面計數,因而增加顯示報表之前的等候時間。Note that if you set PageCountMode to Actual, the entire report must be processed to get a valid page count, increasing wait time before the report is displayed. N、SN,S

延伸模組 (RSReportServer.config 檔) 原生模式Extensions (RSReportServer.config file) Native Mode

<延伸模組>一節會出現在 僅適用於原生模式 報表伺服器的 rsreportserver.config 檔案中。The Extensions section appears in the rsreportserver.config file only for native mode report servers. SharePoint 模式報表伺服器的延伸模組資訊儲存在 SharePoint 組態資料庫中,而且會針對每個 Reporting ServicesReporting Services 服務應用程式設定。Extension information for SharePoint mode report servers is stored in the SharePoint configuration database and is configured per Reporting ServicesReporting Services service application.

Extensions 會針對 Reporting ServicesReporting Services 安裝的下列可延伸模組指定組態設定:Extensions specifies configuration settings for the following extensible modules of a Reporting ServicesReporting Services installation:

  • 傳遞延伸模組Delivery extensions

  • DeliveryUI 延伸模組DeliveryUI extensions

  • 轉譯延伸模組Rendering extensions

  • 資料處理延伸模組Data processing extensions

  • 語意查詢延伸模組 (僅供內部使用)Semantic query extensions (internal only)

  • 模型產生延伸模組 (僅供內部使用)Model generation extensions (internal only)

  • 安全性延伸模組Security extensions

  • 驗證延伸模組Authentication extensions

  • 事件處理延伸模組 (僅供內部使用)Event processing extensions (internal only)

  • 報表定義自訂延伸模組Report definition customization extensions

其中某些延伸模組僅供報表伺服器內部使用。Some of these extensions are strictly for internal use by the report server. 僅供內部使用之延伸模組的組態設定沒有記載。Configuration settings for internal-use-only extensions are not documented. 下列各節描述預設延伸模組的組態設定。The following sections describe configuration settings for the default extensions. 如果您要使用具有自訂延伸模組的報表伺服器,組態檔可能會包含此處未描述的設定。If you are using report server that has custom extensions, your configuration files might contain settings that are not described here. 本節將依據顯示的順序列出這些延伸模組。This section lists the extensions in the order in which they appear. 針對相同延伸模組類型之多個執行個體重複出現的設定只會描述一次。Settings that occur repeatedly for multiple instances of the same kind of extension are described once.

傳遞延伸模組一般組態Delivery Extension(s) General configuration

指定透過訂閱傳遞報表所使用的預設 (也可能是自訂的) 傳遞延伸模組。Specifies default (and possibly custom) delivery extensions used to deliver reports through subscriptions. RSReportServer.config 檔案包含四個傳遞延伸模組的應用程式設定:The RSReportServer.config file includes application settings for four delivery extensions:

  1. 報表伺服器電子郵件Report server e-mail

  2. 檔案共用傳遞。File share delivery.

  3. 報表伺服器文件庫用於在 SharePoint 整合模式下執行的報表伺服器。Report server document library used for a report server that runs in SharePoint integrated mode.

  4. Null 傳遞提供者用於預先載入報表快取。Null delivery provider used to preload the report cache.

如需傳遞延伸模組的詳細資訊,請參閱訂閱與傳遞 (Reporting Services)For more information about delivery extensions, see Subscriptions and Delivery (Reporting Services)

所有傳遞延伸模組都具有 Extension NameMaxRetriesSecondsBeforeRetryConfigurationAll delivery extensions have Extension Name, MaxRetries, SecondsBeforeRetry, and Configuration. 這些共用設定會優先記載。These shared settings are documented first. 延伸模組特有設定的描述接著列於第二個表格中。Descriptions of extension-specific settings follow in a second table.

設定Setting DescriptionDescription
Extension NameExtension Name 指定傳遞延伸模組的易記名稱和組件。Specifies a friendly name and assembly of the delivery extension. 請勿修改此值。Do not modify this value.
MaxRetriesMaxRetries 指定報表伺服器將重試傳遞的次數 (如果第一次嘗試不成功的話)。Specifies the number of times a report server will retry a delivery if the first attempt does not succeed. 預設值是 3。The default value is 3.
SecondsBeforeRetrySecondsBeforeRetry 指定每次重試嘗試之間的時間間隔 (以秒為單位)。Specifies the interval of time (in seconds) between each retry attempt. 預設值是 900。The default value is 900.
ConfigurationConfiguration 包含每個傳遞延伸模組專用的組態設定。Contains the configuration settings that are specific to each delivery extension.

檔案共用傳遞延伸模組組態設定File Share Delivery Extension Configuration Settings

檔案共用傳遞會將已經匯出成應用程式檔案格式的報表傳送至網路上的共用資料夾。File Share delivery sends a report that has been exported to an application file format to a shared folder on the network. 如需詳細資訊,請參閱< File Share Delivery in Reporting Services>。For more information, see File Share Delivery in Reporting Services.

設定Setting DescriptionDescription
ExcludedRenderFormatsRenderingExtensionExcludedRenderFormats, RenderingExtension 這些設定是用於刻意排除無法搭配檔案共用傳遞使用的匯出格式。These settings are used to intentionally exclude export formats that do not work well with file share delivery. 這些格式通常用於互動式報表、預覽或預先載入報表快取。These formats are typically used for interactive reporting, preview, or to preload the report cache. 它們不會產生可輕易地從桌上型電腦應用程式中檢視的應用程式檔案。They do not produce application files that can be easily viewed from a desktop application.

HTMLOWCHTMLOWC

RGDIRGDI

[Null]Null

報表伺服器電子郵件延伸模組組態設定Report Server E-mail Extension Configuration Settings

報表伺服器電子郵件會使用 SMTP 網路裝置,將報表傳送至電子郵件地址。Report Server Email uses an SMTP network device to send reports to e-mail addresses. 您必須先設定這個傳遞延伸模組,然後才能使用它。This delivery extension must be configured before it can be used. 如需詳細資訊,請參閱 Reporting Services 中的電子郵件傳遞For more information, see E-Mail Delivery in Reporting Services.

設定Setting DescriptionDescription
SMTPServerSMTPServer 指定表示遠端 SMTP 伺服器或轉送器位址的字串值。Specifies a string value indicating the address of a remote SMTP server or forwarder. 遠端 SMTP 服務需要此值。This value is required for remote SMTP service. 這可以是 IP 位址、您公司內部網路上電腦的 UNC 名稱,或者完整網域名稱。It can be an IP address, a UNC name of a computer on your corporate intranet, or a fully qualified domain name.
SMTPServerPortSMTPServerPort 指定一個整數值,表示 SMTP 服務用於傳送外寄郵件的通訊埠。Specifies an integer value indicating the port on which the SMTP service uses to send outgoing mail. 通常使用通訊埠 25 來傳送電子郵件。Port 25 is typically used to send e-mail.
SMTPAccountNameSMTPAccountName 包含指派 MicrosoftMicrosoft Outlook Express 帳戶名稱的字串值。Contains a string value that assigns MicrosoftMicrosoft Outlook Express account name. 如果您的 SMTP 伺服器設定來做某些用途,您可以設定此值;否則可以將它保留空白。You can set this value if your SMTP server is configured to use it in some way; otherwise you can leave it blank. 使用 [寄件者] ,以指定用於傳送報表的電子郵件帳戶。Use From to specify an e-mail account used to send reports.
SMTPConnectionTimeoutSMTPConnectionTimeout 指定表示有效通訊端在連接到 SMTP 服務逾時前,所等待之秒數的整數值。預設值是 30 秒,但是如果 SendUsing 設定為 2,就會忽略此值。Specifies an integer value indicating the number of seconds to wait for a valid socket connection with the SMTP service before timing out. The default is 30 seconds, but this value is ignored if SendUsing is set to 2.
SMTPServerPickupDirectorySMTPServerPickupDirectory 指定表示本機 SMTP 服務收取目錄的字串值。Specifies a string value indicating the pickup directory for the local SMTP service. 此值必須是完整本機資料夾路徑 (例如,d:\rs-emails)。This value must be a fully qualified local folder path (for example, d:\rs-emails).
SMTPUseSSLSMTPUseSSL 指定可以設定在透過網路傳送 SMTP 訊息時,使用安全通訊端層 (SSL) 的布林值。Specifies a Boolean value that can be set to use Secure Sockets Layer (SSL) when sending an SMTP message over the network. 預設值是 0 (或 False)。The default value is 0 (or false). [SendUsing] 元素設定為 2 時,可使用此設定。This setting can be used when the SendUsing element is set to 2.
SendUsingSendUsing 指定用於傳送訊息的方法。Specifies which method to use for sending messages. 有效值為:Valid values are:

1=從本機 SMTP 服務收取目錄傳送訊息。1=Sends a message from the local SMTP service pickup directory.

2=從網路 SMTP 服務傳送訊息。2=Sends the message from the network SMTP service.
SMTPAuthenticateSMTPAuthenticate 指定表示在透過 TCP/IP 連接傳送訊息到 SMTP 服務時,要使用之驗證種類的整數值。Specifies an integer value that indicates the kind of authentication to use when sending messages to an SMTP service over a TCP/IP connection. 有效值為:Valid values are:

0=無驗證。0=No authentication.

1= (不支援)。1= (not supported).

2= NTLM (NT LanMan) 驗證。2= NTLM (NT LanMan) authentication. 使用報表伺服器 Windows 服務的安全性內容,連接到網路 SMTP 伺服器。The security context of the Report Server Windows service is used to connect to the network SMTP server.
來源From 以 *abc@host.xyz* 。Specifies an e-mail address from which reports are sent in the format *abc@host.xyz*. 地址會在外寄電子郵件訊息的 [寄件者] 行上出現。The address appears on the From line of an outgoing e-mail message. 如果您使用的是遠端 SMTP 伺服器,則此值是必要的。This value is required if you are using a remote SMTP server. 它應該是擁有傳送郵件之權限的有效電子郵件帳戶。It should be a valid e-mail account that has permission to send mail.
EmbeddedRenderFormats、RenderingExtensionEmbeddedRenderFormats, RenderingExtension 指定用於將報表封裝在電子郵件訊息之主體中的轉譯格式。Specifies the rendering format used to encapsulate a report within the body of an e-mail message. 報表中的影像會後續內嵌在報表中。Images within the report are subsequently embedded within the report. 有效值為 MHTML 和 HTML4.0。Valid values are MHTML and HTML4.0.
PrivilegedUserRenderFormatsPrivilegedUserRenderFormats 指定透過「管理所有訂閱」工作啟用訂閱時,使用者可以從報表訂閱選取的轉譯格式。Specifies rendering formats that a user can select from for a report subscription when subscribing is enabled through the "Manage all subscriptions" task. 如果未設定此值,就可以使用所有未刻意排除的轉譯格式。If this value is not set, all render formats that are not intentionally excluded are available to use.
ExcludedRenderFormats、RenderingExtensionExcludedRenderFormats, RenderingExtension 刻意排除與給定傳遞延伸模組配合不良的格式。Purposely excludes formats that do not work well with a given delivery extension. 您無法排除同一個轉譯延伸模組的多個執行個體,You cannot exclude multiple instances of the same rendering extension. 如果您排除多個執行個體,就會在報表伺服器讀取組態檔時產生錯誤。Excluding multiple instances will result in an error when the report server reads the configuration file. 預設會排除用於電子郵件傳遞的下列延伸模組:By default, the following extensions are excluded for e-mail delivery:

HTMLOWCHTMLOWC

[Null]Null

RGDIRGDI
SendEmailToUserAliasSendEmailToUserAlias 此值使用 DefaultHostNameThis value works with DefaultHostName.

如果 SendEmailToUserAlias 設定為 True,就會自動將定義個別訂閱的使用者指定為報表的收件者。When SendEmailToUserAlias is set to True, users who define individual subscriptions are automatically specified as recipients of the report. [收件者] 欄位是隱藏的。The To field is hidden. 如果值為 False,則看得到 [收件者] 欄位。If this value is False, the To field is visible. 如果您希望充分控制報表散發,請將此值設定為 TrueSet this value to True if you want maximum control over report distribution. 有效值包括下列各項:Valid values include the following:

True=使用建立訂閱之使用者的電子郵件地址。True=The e-mail address of the user creating the subscription is used. 這是預設值。This is the default value.

False=可以指定任何電子郵件地址。False=Any e-mail address can be specified.
DefaultHostNameDefaultHostName 此值使用 SendEmailToUserAliasThis value works with SendEmailToUserAlias.

指定當 SendEmailToUserAlias 設定為 true 時,表示附加到使用者別名之主機名稱的字串值。Specifies a string value indicating the host name to append to the user alias when the SendEmailToUserAlias is set to true. 此值可以是網域名稱系統 (DNS) 名稱或 IP 位址。This value can be a Domain Name System (DNS) name or IP address.
PermittedHostsPermittedHosts 藉由明確地指定哪些主機可以接收電子郵件傳遞,來限制報表散發。Limits report distribution by explicitly specifying which hosts can receive e-mail delivery. PermittedHosts中,將每個主機指定為一個 HostName 元素,其值為 IP 位址或 DNS 名稱。Within PermittedHosts, each host is specified as a HostName element, where the value is either an IP address or a DNS name.

只有主機所定義的電子郵件帳戶為有效收件者。Only e-mail accounts defined for the host are valid recipients. 如果您指定 DefaultHostName,務必要將該主機包含為 PermittedHostsHostName元素。If you specified DefaultHostName, be sure to include that host as HostName element of PermittedHosts. 此值必須是一或多個 DNS 名稱或 IP 位址。This value must be one or more DNS names or IP addresses. 依預設,未設定此值。By default, this value is not set. 如果未設定此值,便不限制誰可以接收電子郵件報表。If the value is not set, there are no restrictions on who can receive e-mailed reports.

報表伺服器 SharePoint 文件庫延伸模組組態Report Server SharePoint Document Library Extension Configuration

報表伺服器文件庫會將已經匯出成應用程式檔案格式的報表傳送至文件庫。Report Server Document Library sends a report that has been exported to an application file format to a document library. 只有設定為在 SharePoint 整合模式中執行的報表伺服器可以使用這個傳遞延伸模組。This delivery extension can only be used by a report server that is configured to run in SharePoint integrated mode. 如需詳細資訊,請參閱< SharePoint Library Delivery in Reporting Services>。For more information, see SharePoint Library Delivery in Reporting Services.

設定Setting DescriptionDescription
ExcludedRenderFormats、RenderingExtensionExcludedRenderFormats, RenderingExtension 這些設定是用於刻意排除無法搭配文件庫傳遞使用的匯出格式。These settings are used to intentionally exclude export formats that do not work well with document library delivery. 系統會排除 HTMLOWC、RGDI 和 Null 傳遞延伸模組。HTMLOWC, RGDI, and Null delivery extensions are excluded. 這些格式通常用於互動式報表、預覽或預先載入報表快取。These formats are typically used for interactive reporting, preview, or to preload the report cache. 它們不會產生可輕易地從桌上型電腦應用程式中檢視的應用程式檔案。They do not produce application files that can be easily viewed from a desktop application.

NULL 傳遞延伸模組組態NULL delivery Extension Configuration

NULL 傳遞提供者是用於預先載入含有個別使用者之預先產生報表的快取。The NULL delivery provider is used to preload the cache with pre-generated reports for individual users. 這個傳遞延伸模組沒有任何組態設定。There are no configuration settings for this delivery extension. 如需詳細資訊,請參閱 快取報表 (SSRS)的版本中預先載入快取的唯一方法。For more information, see Caching Reports (SSRS).

傳遞 UI 延伸模組一般組態Delivery UI Extension(s) General Configuration

指定包含使用者介面元件的傳遞延伸模組,而該元件會顯示於在入口網站中定義個別訂閱時使用的訂閱定義頁面中。Specifies delivery extensions that contain a user interface component that appears in the subscription definition pages used when defining individual subscriptions in the web portal. 如果您建立並部署具有使用者定義選項的自訂傳遞延伸模組,而且您想要使用入口網站,就必須在這個區段中註冊該傳遞延伸模組。If you create and deploy a custom delivery extension that has user-defined options and you want to use the web portal, you must register the delivery extension in this section. 根據預設,報表伺服器電子郵件和報表伺服器檔案共用都具有組態設定。By default, there are configuration settings for Report Server E-mail and Report Server File Share. 只在資料驅動訂閱或 SharePoint 應用程式頁面中使用的傳遞延伸模組沒有此區段的設定。Delivery extensions used only in data-driven subscriptions or in SharePoint application pages do not have settings in this section.

設定Setting DescriptionDescription
DefaultDeliveryExtensionDefaultDeliveryExtension 此設定會決定會先顯示在訂閱定義頁面之傳遞類型清單中的傳遞延伸模組。This setting determines which delivery extension appears first in the list of delivery types in the subscription definition page. 只有一個傳遞延伸模組可以包含這項設定。Only one delivery extension can contain this setting. 有效值包括 TrueFalseValid values include True or False. 當此值設定為 True時,表示該延伸模組為預設選取項目。When this value is set to True, that extension is default selection.
ConfigurationConfiguration 指定傳遞延伸模組的組態選項。Specifies configuration options for a delivery extension. 您可以針對每一個傳遞延伸模組設定預設轉譯格式。You can set a default rendering format for each delivery extension. 有效值是在 rsreportserver.config 檔案的轉譯區段中,所註明的轉譯延伸模組名稱。Valid values are the rendering extension names noted in the render section of the rsreportserver.config file.
DefaultRenderingExtensionDefaultRenderingExtension 指定傳遞延伸模組是否為預設值。Specifies whether a delivery extension is the default. 報表伺服器電子郵件是預設的傳遞延伸模組。Report Server E-Mail is the default delivery extension. 有效值包括 TrueFalseValid values include True or False. 如果有多個延伸模組包含 True值,就會將第一個延伸模組視為預設的延伸模組。If more than one extension contains a value of True, the first extension is considered the default extension.

轉譯延伸模組一般組態Rendering Extensions General Configuration

指定用於報表呈現的預設 (而且可能是自訂的) 轉譯延伸模組。Specifies default (and possibly custom) rendering extensions used in report presentation.

除非您要部署自訂轉譯延伸模組,否則請勿修改此區段。Do not modify this section unless you are deploying a custom rendering extension. 如需詳細資訊,請參閱< Implementing a Rendering Extension>。For more information, see Implementing a Rendering Extension.

預設轉譯延伸模組包含以下內容:Default rendering extensions include the following:

  • XMLXML

  • [Null]Null

  • CSVCSV

  • PDFPDF

  • RGDIRGDI

  • HTML4.0HTML4.0

  • MHTMLMHTML

  • EXCELEXCEL

  • RPLRPL

  • IMAGEIMAGE

SQL Server 2012 (11.x)SQL Server 2012 (11.x) 版開始,MHTML 和 HTML 4.0 轉譯程式預設包含下列裝置資訊設定,以控制調整資料視覺效果大小的行為。Starting with the SQL Server 2012 (11.x)SQL Server 2012 (11.x) release, the MHTML and HTML 4.0 renders contain by default the following device information setting to control the behavior of sizing data visualizations.

<DeviceInfo><DataVisualizationFitSizing>Approximate</DataVisualizationFitSizing></DeviceInfo>  

如需有關 DeviceInfo 設定的詳細資訊,請參閱:For more information on DeviceInfo settings, see the following:

如需 <Render> 底下子 <Extension> 元素屬性的資訊,請參閱下列文章:For information about the attributes for the child <Extension> element under <Render>, see the following:

除非您要部署自訂轉譯延伸模組,否則請勿修改此區段。Do not modify this section unless you are deploying a custom rendering extension. 如需詳細資訊,請參閱< Implementing a Rendering Extension>。For more information, see Implementing a Rendering Extension.

資料延伸模組一般組態Data Extension(s) General Configuration

指定用於處理查詢的預設 (而且可能是自訂的) 資料處理延伸模組。Specifies default (and possibly custom) data processing extensions used to process queries. 預設資料處理延伸模組包含以下內容:Default data processing extensions include the following:

  • SQLSQL

  • SQLAZURESQLAZURE

  • SQLPDWSQLPDW

  • OLEDBOLEDB

  • OLEDB-MDOLEDB-MD

  • ORACLEORACLE

  • ODBCODBC

  • XMLXML

  • SHAREPOINTLISTSHAREPOINTLIST

  • SAPBWSAPBW

  • ESSBASEESSBASE

  • TERADATATERADATA

除非您要加入自訂資料處理延伸模組,否則請勿修改此區段。Do not modify this section unless you are adding custom data processing extensions. 如需詳細資訊,請參閱< Implementing a Data Processing Extension>。For more information, see Implementing a Data Processing Extension.

語意查詢延伸模組一般組態Semantic Query Extensions General Configuration

指定用於處理報表模型的語意查詢處理延伸模組。Specifies semantic query processing extension used to process report models. Reporting ServicesReporting Services 隨附的語意查詢處理延伸模組會提供 SQL ServerSQL Server 關聯式資料、Oracle 和 Analysis ServicesAnalysis Services 多維度資料的支援。The semantic query processing extensions included with Reporting ServicesReporting Services provide support for SQL ServerSQL Server relational data, Oracle, and Analysis ServicesAnalysis Services multidimensional data. 請勿修改此區段。Do not modify this section. 查詢處理不可延伸。Query processing is not extensible.

模型產生組態Model Generation Configuration

指定模型產生延伸模組,它是用於根據已經在報表伺服器上發行的共用資料來源建立報表模型。Specifies a model generation extension used to create report models from a shared data source that is already published on a report server. 您可以針對 SQL ServerSQL Server 關聯式資料、Oracle 和 Analysis ServicesAnalysis Services 多維度資料來源產生模型。You can generate models for SQL ServerSQL Server relational data, Oracle, and Analysis ServicesAnalysis Services multidimensional data sources. 請勿修改此區段。Do not modify this section. 模型產生是無法延伸的。Model generation is not extensible.

安全性延伸模組組態Security Extension Configuration

指定 Reporting ServicesReporting Services所使用的授權元件。Specifies the authorization component used by Reporting ServicesReporting Services. 這個元件是由 RSReportServer.config 檔之 Authentication 項目中註冊的驗證延伸模組所使用。This component is used by the authentication extension registered in the Authentication element of the RSReportServer.config file. 除非您要實作自訂驗證延伸模組,否則請勿修改此區段。Do not modify this section unless you are implementing a custom authentication extension. 如需有關加入自訂安全性功能的詳細資訊,請參閱< Implementing a Security Extension>。For more information about adding custom security features, see Implementing a Security Extension. 如需有關授權的詳細資訊,請參閱< Authorization in Reporting Services>。For more information about authorization, see Authorization in Reporting Services.

驗證延伸模組組態Authentication Extension Configuration

指定報表伺服器所使用的預設和自訂驗證延伸模組。Specifies the default and custom authentication extensions used by the report server. 預設的延伸模組是以 Windows 驗證為基礎。The default extension is based on Windows Authentication. 除非您要實作自訂驗證延伸模組,否則請勿修改此區段。Do not modify this section unless you are implementing a custom authentication extension. 如需 Reporting ServicesReporting Services中驗證的詳細資訊,請參閱 Reporting Services 中的驗證使用報表伺服器驗證For more information about authentication in Reporting ServicesReporting Services, see Authentication in Reporting Services and Authentication with the Report Server. 如需有關加入自訂安全性功能的詳細資訊,請參閱< Implementing a Security Extension>。For more information about adding custom security features, see Implementing a Security Extension.

事件處理Event Processing

指定預設事件處理常式。Specifies default event handlers. 請勿修改此區段。Do not modify this section. 這個區段無法延伸。This section is not extensible.

Report Definition CustomizationReport Definition Customization

指定可修改報表定義之自訂延伸模組的名稱和類型。Specifies the name and type of a custom extension that modifies a report definition.

RDLSandboxingRDLSandboxing

指定報表定義語言 (RDL) 模式,可在多個租用戶共用報表伺服器的單一 Web 伺服陣列的案例中,協助您偵測及限制個別租用戶所使用的特定報表資源類型。Specifies a Report Definition Language (RDL) mode that enables you to help detect and restrict the use of specific types of report resources by individual tenants in a scenario where multiple tenants share a single Web farm of report servers. 如需詳細資訊,請參閱 啟用與停用 RDL 沙箱For more information, see Enable and Disable RDL Sandboxing.

MapTileServerConfiguration (RSReportServer.config 檔案)MapTileServerConfiguration (RSReportServer.config file)

MapTileServerConfiguration 會定義 MicrosoftMicrosoft Bing Maps Web 服務的組態設定,以便針對在報表伺服器上發行之報表中的地圖報表項目提供影像分割背景。MapTileServerConfiguration defines configuration settings for MicrosoftMicrosoft Bing Maps Web Services that provides a tile background for a map report item in a report that is published on a report server. 所有子元素都是必要的。All child elements are required.

設定Setting DescriptionDescription
MaxConnectionsMaxConnections 指定 Bing Maps Web 服務的連接數目上限。Specifies the maximum number of connections to Bing Maps Web Services.
逾時Timeout 指定等候 Bing Maps Web 服務回應的逾時 (以秒為單位)。Specifies the timeout in seconds to wait for a response from Bing Maps Web Services.
AppIDAppID 指定要用於 Bing Maps Web 服務的應用程式識別碼 (AppID)。Specifies the application identifier (AppID) to use for Bing Maps Web Services. (預設值) 會指定 Reporting ServicesReporting Services 預設 AppID。(Default) specifies the Reporting ServicesReporting Services default AppID.

如需有關在報表中使用 Bing 地圖底圖的詳細資訊,請參閱 其他使用規定For more information about the use of Bing map tiles in your report, see Additional Terms of Use.

除非您必須針對自己的 Bing Maps 授權合約指定自訂 AppID,否則請勿變更此值。Do not change this value unless you must specify a custom AppID for your own Bing Maps license agreement. 變更 AppID 時,您不需要重新啟動 Reporting ServicesReporting Services ,即可讓變更生效。When you change the AppID, you do not have to restart Reporting ServicesReporting Services for the change to take effect.
CacheLevelCacheLevel 根據 System.Net.Cache 的 HttpRequestCacheLevel 列舉型別指定值。Specifies a value from the HttpRequestCacheLevel Enumeration of System.Net.Cache. 預設值為 DefaultThe default value is Default. 如需詳細資訊,請參閱 HttpRequestCacheLevel 列舉型別For more information, see HttpRequestCacheLevel Enumeration.

原生模式報表伺服器的預設組態檔Default Configuration File for a Native Mode Report Server

預設情況下,rsreportserver.config 檔案會安裝到以下位置:The rsreportserver.config file is installed to the following location by default:

C:\Program Files\Microsoft SQL Server\MSRS13.MSSQLSERVER\Reporting Services\ReportServerC:\Program Files\Microsoft SQL Server\MSRS13.MSSQLSERVER\Reporting Services\ReportServer

<Configuration>
    <Dsn>AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAR58DMGebHUeMvyR6HR04kQQAAAAiAAAAUgBlAHAAbwBy
AHQAaQBuAGcAIABTAGUAcgB2AGUAcgAAAANmAADAAAAAEAAAADczfLRgZ4GF44iBHkLrKY4AAAAA
BIAAAKAAAAAQAAAAJ9wQOmDNauH+LS30rboJ2OAAAAAp0kiFFBrc3r3ypKaldZJtjCORX9LTZRzt
0/JCSVIZc4GXx0peGKqd+f85UyrY/KOyUSHogOC/XoBp9Ppxv6ITbdunsS/LXEcMUBVqEdQD4ylh
x6K1NTC/u8hl9v0MgK+xMQKaiV7BuNYbgGgkaViABcNH0xVzcc5rMTHUkrABbGDFGKyAFniGQ1qu
/rqHibNNyvYbP/2uiqvgC0tQl6u8VkVbXpWrkvO+bFCqxlaJlCoDc2f3rIO321SZEvoFbsYNgPLd
+mIAkSCnH3Z3gm/bI8bqVkFaHblKyQuSfFsi6RQAAACb87b26dV0GjHmMJnE0Tk8CzNmhg==</Dsn>
    <ConnectionType>Default</ConnectionType>
    <LogonUser></LogonUser>
    <LogonDomain></LogonDomain>
    <LogonCred></LogonCred>
    <InstanceId>MSRS13.MSSQLSERVER</InstanceId>
    <InstallationID>{cd920604-a5c7-4554-b2a0-aadc04312fe5}</InstallationID>
    <Add Key="SecureConnectionLevel" Value="0"/>
    <Add Key="DisableSecureFormsAuthenticationCookie" Value="false"/>
    <Add Key="CleanupCycleMinutes" Value="10"/>
    <Add Key="MaxActiveReqForOneUser" Value="20"/>
    <Add Key="DatabaseQueryTimeout" Value="120"/>
    <Add Key="RunningRequestsScavengerCycle" Value="60"/>
    <Add Key="RunningRequestsDbCycle" Value="60"/>
    <Add Key="RunningRequestsAge" Value="30"/>
    <Add Key="MaxScheduleWait" Value="5"/>
    <Add Key="DisplayErrorLink" Value="true"/>
    <Add Key="WebServiceUseFileShareStorage" Value="false"/>
    <!--  <Add Key="ProcessTimeout" Value="150" /> -->
    <!--  <Add Key="ProcessTimeoutGcExtension" Value="30" /> -->
    <!--  <Add Key="WatsonFlags" Value="0x0430" /> full dump-->
    <!--  <Add Key="WatsonFlags" Value="0x0428" /> minidump -->
    <!--  <Add Key="WatsonFlags" Value="0x0002" /> no dump-->
    <Add Key="WatsonFlags" Value="0x0428"/>
    <Add Key="WatsonDumpOnExceptions" Value="Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException"/>
    <Add Key="WatsonDumpExcludeIfContainsExceptions" Value="System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException,Microsoft.ReportingServices.WmiProvider.WMIProviderException,System.AppDomainUnloadedException"/>
    <URLReservations>
        <Application>
            <Name>ReportServerWebService</Name>
            <VirtualDirectory>ReportServer</VirtualDirectory>
            <URLs>
                <URL>
                    <UrlString>https://+:80</UrlString>
                    <AccountSid>S-1-5-80-2885764129-887777008-271615777-1616004480-2722851051</AccountSid>
                    <AccountName>NT SERVICE\ReportServer</AccountName>
                </URL>
            </URLs>
        </Application>
        <Application>
            <Name>ReportServerWebApp</Name>
            <VirtualDirectory>Reports</VirtualDirectory>
            <URLs>
                <URL>
                    <UrlString>https://+:80</UrlString>
                    <AccountSid>S-1-5-80-2885764129-887777008-271615777-1616004480-2722851051</AccountSid>
                    <AccountName>NT SERVICE\ReportServer</AccountName>
                </URL>
            </URLs>
        </Application>
    </URLReservations>
    <Authentication>
        <AuthenticationTypes>
            <RSWindowsNTLM/>
        </AuthenticationTypes>
        <RSWindowsExtendedProtectionLevel>Off</RSWindowsExtendedProtectionLevel>
        <RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
        <EnableAuthPersistence>true</EnableAuthPersistence>
    </Authentication>
    <Service>
        <IsSchedulingService>True</IsSchedulingService>
        <IsNotificationService>True</IsNotificationService>
        <IsEventService>True</IsEventService>
        <PollingInterval>10</PollingInterval>
        <WindowsServiceUseFileShareStorage>False</WindowsServiceUseFileShareStorage>
        <MemorySafetyMargin>80</MemorySafetyMargin>
        <MemoryThreshold>90</MemoryThreshold>
        <RecycleTime>720</RecycleTime>
        <MaxAppDomainUnloadTime>30</MaxAppDomainUnloadTime>
        <MaxQueueThreads>0</MaxQueueThreads>
        <UrlRoot>
        </UrlRoot>
        <UnattendedExecutionAccount>
            <UserName></UserName>
            <Password></Password>
            <Domain></Domain>
        </UnattendedExecutionAccount>
        <PolicyLevel>rssrvpolicy.config</PolicyLevel>
        <IsWebServiceEnabled>True</IsWebServiceEnabled>
        <IsReportManagerEnabled>True</IsReportManagerEnabled>
        <FileShareStorageLocation>
            <Path>
            </Path>
        </FileShareStorageLocation>
        <DefaultFileShareAccount>
            <Domain></Domain>
            <UserName></UserName>
            <Password></Password>
        </DefaultFileShareAccount>
    </Service>
    <UI>
        <ReportServerUrl>
        </ReportServerUrl>
        <PageCountMode>Estimate</PageCountMode>
    </UI>
    <Extensions>
        <Delivery>
            <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider,ReportingServicesFileShareDeliveryProvider">
                <MaxRetries>3</MaxRetries>
                <SecondsBeforeRetry>900</SecondsBeforeRetry>
                <Configuration>
                    <FileShareConfiguration>
                        <ExcludedRenderFormats>
                            <RenderingExtension>HTMLOWC</RenderingExtension>
                            <RenderingExtension>NULL</RenderingExtension>
                            <RenderingExtension>RGDI</RenderingExtension>
                        </ExcludedRenderFormats>
                    </FileShareConfiguration>
                </Configuration>
            </Extension>
            <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider,ReportingServicesEmailDeliveryProvider">
                <MaxRetries>3</MaxRetries>
                <SecondsBeforeRetry>900</SecondsBeforeRetry>
                <Configuration>
                    <RSEmailDPConfiguration>
                        <SMTPServer></SMTPServer>
                        <SMTPServerPort>
                        </SMTPServerPort>
                        <SMTPAccountName>
                        </SMTPAccountName>
                        <SMTPConnectionTimeout>
                        </SMTPConnectionTimeout>
                        <SMTPServerPickupDirectory>
                        </SMTPServerPickupDirectory>
                        <SMTPUseSSL>False</SMTPUseSSL>
                        <SendUsing>2</SendUsing>
                        <SMTPAuthenticate>0</SMTPAuthenticate>
                        <SendUserName></SendUserName>
                        <SendPassword></SendPassword>
                        <From></From>
                        <EmbeddedRenderFormats>
                            <RenderingExtension>MHTML</RenderingExtension>
                        </EmbeddedRenderFormats>
                        <PrivilegedUserRenderFormats>
                        </PrivilegedUserRenderFormats>
                        <ExcludedRenderFormats>
                            <RenderingExtension>HTMLOWC</RenderingExtension>
                            <RenderingExtension>NULL</RenderingExtension>
                            <RenderingExtension>RGDI</RenderingExtension>
                        </ExcludedRenderFormats>
                        <SendEmailToUserAlias>True</SendEmailToUserAlias>
                        <DefaultHostName>
                        </DefaultHostName>
                        <PermittedHosts>
                        </PermittedHosts>
                    </RSEmailDPConfiguration>
                </Configuration>
            </Extension>
            <Extension Name="Report Server DocumentLibrary" Type="Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider,ReportingServicesSharePointDeliveryExtension">
                <MaxRetries>3</MaxRetries>
                <SecondsBeforeRetry>900</SecondsBeforeRetry>
                <Configuration>
                    <DocumentLibraryConfiguration>
                        <ExcludedRenderFormats>
                            <RenderingExtension>HTMLOWC</RenderingExtension>
                            <RenderingExtension>NULL</RenderingExtension>
                            <RenderingExtension>RGDI</RenderingExtension>
                        </ExcludedRenderFormats>
                    </DocumentLibraryConfiguration>
                </Configuration>
            </Extension>
            <Extension Name="NULL" Type="Microsoft.ReportingServices.NullDeliveryProvider.NullProvider,ReportingServicesNullDeliveryProvider"/>
            <Extension Name="Report Server PowerBI" Type="Microsoft.ReportingServices.PowerBIDeliveryProvider.PowerBIDeliveryProvider,ReportingServicesPowerBIDeliveryProvider">
                <MaxRetries>3</MaxRetries>
                <SecondsBeforeRetry>900</SecondsBeforeRetry>
                <Configuration>
                    <PowerBIDeliveryConfiguration>
                    </PowerBIDeliveryConfiguration>
                </Configuration>
            </Extension>
        </Delivery>
        <DeliveryUI>
            <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailDeliveryProviderControl,ReportingServicesEmailDeliveryProvider">
                <DefaultDeliveryExtension>True</DefaultDeliveryExtension>
                <Configuration>
                    <RSEmailDPConfiguration>
                        <DefaultRenderingExtension>MHTML</DefaultRenderingExtension>
                    </RSEmailDPConfiguration>
                </Configuration>
            </Extension>
            <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareUIControl,ReportingServicesFileShareDeliveryProvider"/>
            <Extension Name="Report Server PowerBI" Type="Microsoft.ReportingServices.PowerBIDeliveryProvider.PowerBIDeliveryUIControl,ReportingServicesPowerBIDeliveryProvider"/>
        </DeliveryUI>
        <Render>
            <Extension Name="WORDOPENXML" Type="Microsoft.ReportingServices.Rendering.WordRenderer.WordOpenXmlRenderer.WordOpenXmlDocumentRenderer,Microsoft.ReportingServices.WordRendering"/>
            <Extension Name="WORD" Type="Microsoft.ReportingServices.Rendering.WordRenderer.WordDocumentRenderer,Microsoft.ReportingServices.WordRendering" Visible="false"/>
            <Extension Name="EXCELOPENXML" Type="Microsoft.ReportingServices.Rendering.ExcelOpenXmlRenderer.ExcelOpenXmlRenderer,Microsoft.ReportingServices.ExcelRendering"/>
            <Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering" Visible="false"/>
            <Extension Name="PPTX" Type="Microsoft.ReportingServices.Rendering.PowerPointRendering.PptxRenderingExtension,Microsoft.ReportingServices.PowerPointRendering"/>
            <Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer,Microsoft.ReportingServices.ImageRendering"/>
            <Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRenderer,Microsoft.ReportingServices.ImageRendering"/>
            <Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering">
                <Configuration>
                    <DeviceInfo>
                        <DataVisualizationFitSizing>Approximate</DataVisualizationFitSizing>
                    </DeviceInfo>
                </Configuration>
            </Extension>
            <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering"/>
            <Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.DataRenderer.XmlDataReport,Microsoft.ReportingServices.DataRendering"/>
            <Extension Name="ATOM" Type="Microsoft.ReportingServices.Rendering.DataRenderer.AtomDataReport,Microsoft.ReportingServices.DataRendering"/>
            <Extension Name="NULL" Type="Microsoft.ReportingServices.Rendering.NullRenderer.NullReport,Microsoft.ReportingServices.NullRendering" Visible="false"/>
            <Extension Name="RGDI" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.RGDIRenderer,Microsoft.ReportingServices.ImageRendering" Visible="false"/>
            <Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false">
                <Configuration>
                    <DeviceInfo>
                        <DataVisualizationFitSizing>Approximate</DataVisualizationFitSizing>
                    </DeviceInfo>
                </Configuration>
            </Extension>
            <Extension Name="HTML5" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html5RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false">
                <Configuration>
                    <DeviceInfo>
                        <DataVisualizationFitSizing>Approximate</DataVisualizationFitSizing>
                    </DeviceInfo>
                </Configuration>
            </Extension>
            <Extension Name="RPL" Type="Microsoft.ReportingServices.Rendering.RPLRendering.RPLRenderer,Microsoft.ReportingServices.RPLRendering" Visible="false" LogAllExecutionRequests="false"/>
        </Render>
        <!--
        For the SQLPDW extension to work, install the SQL Server PDW Client Tools on the report server.
        NOTE: The SQLPDW extension is deprecated. It supports old versions of SQL Server Parallel Data Warehouse (PDW).        
        To connect to Analytics Platform System, use the SQL (SQL Server) extension.        
        For the ORACLE extension to work, install the Oracle Data Provider for NET (ODP.NET) on the report server.
        For TERADATA extension to work, install the .NET Provider for Teradata on the report server.
      -->
        <Data>
            <Extension Name="SQL" Type="Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.DataExtensions.SqlAzureConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="SQLPDW" Type="Microsoft.ReportingServices.DataExtensions.SqlDwConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="OLEDB-MD" Type="Microsoft.ReportingServices.DataExtensions.AdoMdConnection,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="SHAREPOINTLIST" Type="Microsoft.ReportingServices.DataExtensions.SharePointList.SPListConnection,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="ORACLE" Type="Microsoft.ReportingServices.DataExtensions.OracleClientConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="ESSBASE" Type="Microsoft.ReportingServices.DataExtensions.Essbase.EssbaseConnection,Microsoft.ReportingServices.DataExtensions.Essbase"/>
            <Extension Name="SAPBW" Type="Microsoft.ReportingServices.DataExtensions.SapBw.SapBwConnection,Microsoft.ReportingServices.DataExtensions.SapBw"/>
            <Extension Name="TERADATA" Type="Microsoft.ReportingServices.DataExtensions.TeradataConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="OLEDB" Type="Microsoft.ReportingServices.DataExtensions.OleDbConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="ODBC" Type="Microsoft.ReportingServices.DataExtensions.OdbcConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="XML" Type="Microsoft.ReportingServices.DataExtensions.XmlDPConnection,Microsoft.ReportingServices.DataExtensions"/>
        </Data>
        <SemanticQuery>
            <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
                <Configuration>
                    <EnableMathOpCasting>False</EnableMathOpCasting>
                </Configuration>
            </Extension>
            <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
                <Configuration>
                    <EnableMathOpCasting>False</EnableMathOpCasting>
                </Configuration>
            </Extension>
            <Extension Name="SQLPDW" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQLADW.MSSqlAdwSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
                <Configuration>
                    <EnableMathOpCasting>False</EnableMathOpCasting>
                </Configuration>
            </Extension>
            <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
                <Configuration>
                    <EnableMathOpCasting>True</EnableMathOpCasting>
                    <DisableNO_MERGEInLeftOuters>False</DisableNO_MERGEInLeftOuters>
                    <EnableUnistr>False</EnableUnistr>
                    <DisableTSTruncation>False</DisableTSTruncation>
                </Configuration>
            </Extension>
            <Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
                <Configuration>
                    <EnableMathOpCasting>True</EnableMathOpCasting>
                    <ReplaceFunctionName>oREPLACE</ReplaceFunctionName>
                </Configuration>
            </Extension>
            <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.QueryExecution.ASSemanticQueryCommand,Microsoft.AnalysisServices.Modeling"/>
        </SemanticQuery>
        <ModelGeneration>
            <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
            <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
            <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
            <Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
            <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.Generation.ModelGeneratorExtention,Microsoft.AnalysisServices.Modeling"/>
        </ModelGeneration>
        <Security>
            <Extension Name="Windows" Type="Microsoft.ReportingServices.Authorization.WindowsAuthorization, Microsoft.ReportingServices.Authorization"/>
        </Security>
        <Authentication>
            <Extension Name="Windows" Type="Microsoft.ReportingServices.Authentication.WindowsAuthentication, Microsoft.ReportingServices.Authorization"/>
        </Authentication>
        <EventProcessing>
            <Extension Name="SnapShot Extension" Type="Microsoft.ReportingServices.Library.HistorySnapShotCreatedHandler,ReportingServicesLibrary">
                <Event>
                    <Type>ReportHistorySnapshotCreated</Type>
                </Event>
            </Extension>
            <Extension Name="Timed Subscription Extension" Type="Microsoft.ReportingServices.Library.TimedSubscriptionHandler,ReportingServicesLibrary">
                <Event>
                    <Type>TimedSubscription</Type>
                </Event>
            </Extension>
            <Extension Name="Cache Refresh Plan Extension" Type="Microsoft.ReportingServices.Library.CacheRefreshPlanHandler,ReportingServicesLibrary">
                <Event>
                    <Type>RefreshCache</Type>
                </Event>
            </Extension>
            <Extension Name="Shared Dataset Cache Update Extension" Type="Microsoft.ReportingServices.Library.SharedDatasetCacheUpdatePlanHandler,ReportingServicesLibrary">
                <Event>
                    <Type>SharedDatasetCacheUpdate</Type>
                </Event>
            </Extension>
            <Extension Name="Cache Update Extension" Type="Microsoft.ReportingServices.Library.ReportExecutionSnapshotUpdateEventHandler,ReportingServicesLibrary">
                <Event>
                    <Type>SnapshotUpdated</Type>
                </Event>
            </Extension>
        </EventProcessing>
    </Extensions>
    <MapTileServerConfiguration>
        <MaxConnections>2</MaxConnections>
        <Timeout>10</Timeout>
        <AppID>(Default)</AppID>
        <CacheLevel>Default</CacheLevel>
    </MapTileServerConfiguration>
</Configuration> 

SharePoint 模式報表伺服器的預設組態檔Default Configuration File for a SharePoint Mode Report Server

預設情況下,rsreportserver.config 檔案會安裝到以下位置:The rsreportserver.config file is installed to the following location by default:

C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\WebServices\ReportingC:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\WebServices\Reporting

<Configuration>  
  <Dsn />  
  <ConnectionType>Default</ConnectionType>  
  <LogonUser>  
  </LogonUser>  
  <LogonDomain>  
  </LogonDomain>  
  <LogonCred>  
  </LogonCred>  
  <InstanceId>MSRS12.@Sharepoint</InstanceId>  
  <Add Key="SecureConnectionLevel" Value="0" />  
  <Add Key="CleanupCycleMinutes" Value="10" />  
  <Add Key="MaxActiveReqForOneUser" Value="20" />  
  <Add Key="AlertingCleanupCycleMinutes" Value="20" />  
  <Add Key="AlertingDataCleanupMinutes" Value="360" />  
  <Add Key="AlertingExecutionLogCleanupMinutes" Value="10080" />  
  <Add Key="AlertingMaxDataRetentionDays" Value="180" />  
  <Add Key="RunningRequestsScavengerCycle" Value="60" />  
  <Add Key="RunningRequestsDbCycle" Value="60" />  
  <Add Key="RunningRequestsAge" Value="30" />  
  <Add Key="MaxScheduleWait" Value="5" />  
  <Add Key="DisplayErrorLink" Value="true" />  
  <Add Key="WebServiceUseFileShareStorage" Value="false" />  
  <!--  <Add Key="ProcessTimeout" Value="150" /> -->  
  <!--  <Add Key="ProcessTimeoutGcExtension" Value="30" /> -->  
  <!--  <Add Key="WatsonFlags" Value="0x0430" /> full dump-->  
  <!--  <Add Key="WatsonFlags" Value="0x0428" /> minidump -->  
  <!--  <Add Key="WatsonFlags" Value="0x0002" /> no dump-->  
  <Add Key="WatsonFlags" Value="0x0428" />  
  <Add Key="WatsonDumpOnExceptions" Value="Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException" />  
  <Add Key="WatsonDumpExcludeIfContainsExceptions" Value="System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException,Microsoft.ReportingServices.WmiProvider.WMIProviderException" />  
  <RStrace>  
    <add name="FileName" value="ReportServerService" />  
    <add name="FileSizeLimitMb" value="32" />  
    <add name="KeepFilesForDays" value="14" />  
    <add name="Prefix" value="tid, time" />  
    <add name="TraceListeners" value="file" />  
    <add name="TraceFileMode" value="unique" />  
    <add name="Components" value="all:3" />  
  </RStrace>  
  <URLReservations>  
    <Application>  
      <Name>ReportServerWebService</Name>  
      <VirtualDirectory>ReportServer</VirtualDirectory>  
      <URLs>  
        <URL>  
          <UrlString>https://+:80</UrlString>  
          <AccountSid>  
          </AccountSid>  
          <AccountName>  
          </AccountName>  
        </URL>  
      </URLs>  
    </Application>  
    <Application>  
      <Name>ReportManager</Name>  
      <VirtualDirectory>Reports</VirtualDirectory>  
      <URLs>  
        <URL>  
          <UrlString>https://+:80</UrlString>  
          <AccountSid>  
          </AccountSid>  
          <AccountName>  
          </AccountName>  
        </URL>  
      </URLs>  
    </Application>  
  </URLReservations>  
  <Authentication>  
    <AuthenticationTypes>  
      <RSWindowsNTLM />  
    </AuthenticationTypes>  
    <EnableAuthPersistence>true</EnableAuthPersistence>  
  </Authentication>  
  <Service>  
    <IsSchedulingService>True</IsSchedulingService>  
    <IsNotificationService>True</IsNotificationService>  
    <IsEventService>True</IsEventService>  
    <IsAlertingService>True</IsAlertingService>  
    <PollingInterval>10</PollingInterval>  
    <WindowsServiceUseFileShareStorage>False</WindowsServiceUseFileShareStorage>  
    <MemorySafetyMargin>80</MemorySafetyMargin>  
    <MemoryThreshold>90</MemoryThreshold>  
    <RecycleTime>720</RecycleTime>  
    <MaxAppDomainUnloadTime>30</MaxAppDomainUnloadTime>  
    <MaxQueueThreads>0</MaxQueueThreads>  
    <UrlRoot>  
    </UrlRoot>  
    <PolicyLevel>rssrvpolicy.config</PolicyLevel>  
    <IsWebServiceEnabled>True</IsWebServiceEnabled>    
    <FileShareStorageLocation>  
      <Path>  
      </Path>  
    </FileShareStorageLocation>  
  </Service>  
  <UI>  
    <ReportServerUrl>  
    </ReportServerUrl>  
    <PageCountMode>Estimate</PageCountMode>  
  </UI>  
  <MapTileServerConfiguration>  
    <MaxConnections>2</MaxConnections>  
    <Timeout>10</Timeout>  
    <AppID>(Default)</AppID>  
    <CacheLevel>Default</CacheLevel>  
  </MapTileServerConfiguration>  
</Configuration>  

另請參閱See Also

修改 Reporting Services 組態檔 (RSreportserver.config) Modify a Reporting Services Configuration File (RSreportserver.config)
設定報表伺服器應用程式的可用記憶體 Configure Available Memory for Report Server Applications
Reporting Services 組態檔 Reporting Services Configuration Files
將報表伺服器初始化 (SSRS 組態管理員) Initialize a Report Server (SSRS Configuration Manager)
儲存加密的報表伺服器資料 (SSRS 組態管理員) Store Encrypted Report Server Data (SSRS Configuration Manager)
Reporting Services 組態管理員 (原生模式)Reporting Services Configuration Manager (Native Mode)
更多問題嗎?More questions? 試試 Reporting Services 論壇Try the Reporting Services forum