如何在 Operations Manager 中刪除或還原網路裝置How to delete or restore a network device in Operations Manager

重要

已不再支援此版本的 Operations Manager,建議升級至 Operations Manager 2019This version of Operations Manager has reached the end of support, we recommend you to upgrade to Operations Manager 2019.

在 System Center - Operations Manager 探索並監視網路裝置之後,您可能因為即將更換裝置,或是因為監視該特定裝置不具商業價值,或是任何其他原因,而想要停止監視裝置。After System Center - Operations Manager has discovered and is monitoring a network device, you might want to stop monitoring the device because it is being replaced or because there is no business value in monitoring that particular device or for any other reason. 若要停止監視裝置,您可以使用維護模式或從探索規則刪除網路裝置。To stop monitoring a device, you can use maintenance mode or you can delete the network device from the discovery rule. 您也可以還原由遞迴探索規則探索到的已刪除裝置。You can also restore a deleted device that was discovered by a recursive discovery rule.

若要刪除作為遞迴探索起點的裝置,您必須先刪除探索規則,或從探索規則移除該裝置。To delete a device that is the starting point for recursive discovery, you must first delete the discovery rule or remove the device from the discovery rule.

注意

您可以識別與探索到的網路裝置相關聯的探索規則,方法是在 [網路裝置] 或 [網路裝置擱置管理] 中,在裝置上按一下滑鼠右鍵,然後按一下 [探索規則內容] 。You can identify the discovery rule associated with a discovered network device by right-clicking the device in Network Devices or Network Devices Pending Management and then clicking Discovery Rule Properties.

如果您刪除由遞迴探索規則探索到的裝置,它會新增到規則的排除清單。If you delete a device that was discovered by a recursive discovery rule, it will be added to the exclude list of the rule. 如果您想要再次探索並監視該裝置,必須從規則內容的 [排除篩選器] 頁面先移除該裝置,然後重新執行探索。If you want to have that device discovered and monitored again, you must remove the device from the Exclude Filters page of the rule's properties and run the discovery again.

刪除明確探索所探索到的網路裝置To delete a network device discovered by explicit discovery

  1. 在 Operations 主控台中,選取 [系統管理] 工作區。In the Operations console, select the Administration workspace.

  2. 按一下 [網路裝置] 、以滑鼠右鍵按一下您要刪除的裝置規則,然後按一下 [刪除] 。Click Network Devices, right-click the device that you want to delete, and then click Delete.

    注意

    您可以選取要刪除多個裝置。You can select multiple devices to delete.

刪除在遞迴探索規則中指定的網路裝置To delete a network device specified in a recursive discovery rule

  1. 在 Operations 主控台中,選取 [系統管理] 工作區。In the Operations console, select the Administration workspace.

  2. 開啟探索規則的 [內容] ,並在 [裝置] 頁面上移除裝置。Open Properties for the discovery rule and remove the device on the Devices page.

刪除遞迴探索所探索到的網路裝置To delete a network device discovered by recursive discovery

  1. 在 Operations 主控台中,選取 [系統管理] 工作區。In the Operations console, select the Administration workspace.

  2. 在 [網路管理] 中,按一下 [網路裝置]。Click Network Devices in Network Management.

  3. 在 [網路裝置] 窗格中,以滑鼠右鍵按一下遞迴探索所探索到的裝置,然後選取 [刪除] 。In the Network Devices pane, right-click a device that was discovered by recursive discovery, and then select Delete.

  4. 系統會以訊息提示您,要求您確認想要停止監視選取的網路裝置。You will be prompted with a message asking you to confirm that you want to stop monitoring the selected network device. 按一下 [完成] 。Click Yes.

  5. 按一下 [探索規則] 。Click Discovery Rules.

  6. 以滑鼠右鍵按一下遞迴探索規則,然後選取 [內容] 。Right-click the recursive discovery rule, and then select Properties.

  7. 按一下 [排除篩選器] 。Click Exclude Filters.

  8. 確認已針對已刪除的裝置建立排除篩選器。Verify that an exclude filter has been created for the deleted device. 這會花費幾分鐘的時間。This may take a few minutes to occur.

還原已從遞迴探索刪除的網路裝置To restore a network device that was deleted from recursive discovery

  1. 在 Operations 主控台中,選取 [系統管理] 工作區。In the Operations console, select the Administration workspace.

  2. 按一下 [探索規則] 。Click Discovery Rules.

  3. 以滑鼠右鍵按一下遞迴探索規則,然後選取 [內容] 。Right-click the recursive discovery rule, and then select Properties.

  4. 按一下 [排除篩選器] 。Click Exclude Filters.

  5. 按一下網路裝置,然後按一下 [移除] 。Click the network device and then click Remove.

  6. 按一下 [摘要] ,然後按一下 [儲存] 以儲存並關閉探索規則。Click Summary, and then click Save to save and close the discovery rule.

  7. 選取探索規則後,按一下 [執行] 窗格中的 [執行] ,重新執行探索規則。With the discovery rule selected, click Run in the Actions pane to rerun the discovery rule.

    請注意規則執行時的狀態,並等到它顯示空白狀態。Note the status of the rule as it runs and wait until it shows a blank status.

  8. 確認已重新探索到裝置。Verify that the device is rediscovered. 這可能需要幾分鐘到幾個小時,視環境中的裝置數目而定。This may take a few minutes to a few hours depending on the number of devices in the environment. 您可以檢視探索規則的狀態,以判斷它何時完成。You can view the status of the discovery rule to determine when it has completed.

後續步驟Next steps