設定 VMM 網路光纖Set up the VMM networking fabric

重要

已不再支援此版本的 Virtual Machine Manager (VMM),建議升級至 VMM 2019This version of Virtual Machine Manager (VMM) has reached the end of support, we recommend you to upgrade to VMM 2019.

本文提供設定 System Center - Virtual Machine Manager (VMM) 網路網狀架構的概觀。This article provides an overview of setting up the System Center - Virtual Machine Manager (VMM) networking fabric.

以下是您在 VMM 光纖中設定網路功能時一般需要執行的作業︰Here's what you'll typically do to set up networking in the VMM fabric:

  1. 設定邏輯網路︰建立對應至您實體網路的邏輯網路。Set up logical networks: Create logical networks that maps to your physical networks. 您可以建立對應至實體網路中網站的網站。You can create network sites that map to network sites in your physical network. 例如 IP 子網路、VLN 或子網路/VLAN 配對。For example IP subnets, VLNS, or subnet/VLAN pairs. 如果您不是使用 DHCP,則要為存在實體網路中的網站建立 IP 位址集區。Then if you're not using DHCP you create IP address pools for the network sites that exist within your physical networks.
  2. 建立 VM 網路︰建立對應至存在實體網路中網站的 VM 網路。Create VM networks: Create VM networks that map to network sites that exist within your physical networks.
  3. 設定 IP 位址集區︰建立要配置靜態 IP 位址的位址集區。Set up IP address pools: Create address pool to allocate static IP addresses. 您必須設定邏輯網路的集區,在某些情況下,也必須設定 VM 網路的集區。You'll need to configure pools for logical networks, and in some circumstances for VM networks too.
  4. 新增閘道:您可能需要在 VMM 網路光纖中設定網路虛擬化閘道。Add a gateway: You might need to set up network virtualization gateways in the VMM networking fabric. 如果您在 VMM 光纖中使用隔離的 VM 網路,與網路相關聯的 VM 預設只能連線至相同子網路中的電腦。By default, if you're using isolated VM networks in your VMM fabric, VMs associated with a network can only connect to machines in the same subnet. 如果您不只想要將 VM 進一步連線至子網路,則需要閘道。If you want to connect VMs further than the subnet you'll need a gateway.
  5. 建立通訊埠設定檔︰建立寬頻全球區域網路通訊埠設定檔,以向 VMM 指示主機可以連線至特定網路介面卡上的哪一個網路。Create port profiles: Create uplink port profiles that indicates to VMM which networks a host can connect to on a specific network adapter. 視需要建立虛擬通訊埠設定檔,以指定應套用到虛擬網路介面卡的設定。If required create virtual port profiles to specify settings that should be applied to virtual network adapters. 您可以建立自訂通訊埠分類來提取虛擬通訊埠設定檔。You can create custom port classifications to abstract virtual port profiles.
  6. 設定邏輯交換器︰建立一個邏輯交換器,並將它套用至主機,然後選取您想要繫結到該交換器之主機上的網路介面卡。Configure logical switches: Create a logical switch, apply it to a host and select the network adapters on the host that you want to bind to the switch. 套用交換器時,網路設定會套用至主機。When you apply the switch networking settings will be applied to the host.