RouterDiscoveryEnabledRouterDiscoveryEnabled

RouterDiscoveryEnabled 指定路由器探索通訊協定,會通知主機路由器的存在,是否已啟用此介面的 IPv4 通訊協定。RouterDiscoveryEnabled specifies whether the router discovery protocol, which informs hosts of the existence of routers, is enabled for the IPv4 protocol for this interface. 此設定會控制網際網路控制訊息通訊協定 (ICMP) 路由器探索。This setting controls Internet Control Message Protocol (ICMP) router discovery.

Values

truetrue

啟用 IPv4 通訊協定,此介面上的路由器探索。Enables router discovery for the IPv4 protocol on this interface.

falsefalse

停用 IPv4 通訊協定,此介面上的路由器探索。Disables router discovery for the IPv4 protocol on this interface. 這是預設值。This is the default value.

有效的設定階段Valid Configuration Passes

特製化specialize

windowsPEwindowsPE

父階層Parent Hierarchy

Microsoft-Windows-TCPIP | Interfaces | Interface | Ipv4Settings | RouterDiscoveryEnabledMicrosoft-Windows-TCPIP | Interfaces | Interface | Ipv4Settings | RouterDiscoveryEnabled

套用至Applies To

如需 Windows 版本與此元件支援的架構清單,請參閱Microsoft-Windows-TCPIPFor the list of the Windows editions and architectures that this component supports, see Microsoft-Windows-TCPIP.

XML 範例XML Example

下列的 XML 輸出會顯示如何設定為 TCPIP。The following XML output shows how to configure TCPIP.

<component name="Microsoft-Windows-TCPIP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <Interfaces>
   <!-- Add static IP address (192.168.0.1/24, ffff:1::3/48) & route (12.34.0.0/16) to interface with identifier "Ethernet 1" -->      <Interface wcm:action="add">
         <Ipv4Settings>
            <DhcpEnabled>true</DhcpEnabled> 
            <Metric>20</Metric> 
            <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled> 
         </Ipv4Settings>
         <Ipv6Settings>
            <DhcpEnabled>false</DhcpEnabled> 
            <Metric>30</Metric> 
            <RouterDiscoveryEnabled>true</RouterDiscoveryEnabled> 
         </Ipv6Settings>
      <Identifier>Ethernet 1</Identifier>
         <UnicastIpAddresses>
           <IpAddress wcm:action="add" wcm:keyValue="1">192.168.0.1/24</IpAddress>
           <IpAddress wcm:action="add" wcm:keyValue="2">ffff:1::3/48</IpAddress>
         </UnicastIpAddresses>
         <Routes>
            <Route wcm:action="add">
               <Identifier>1</Identifier> 
               <Metric>10</Metric> 
               <NextHopAddress>12.34.0.0</NextHopAddress> 
               <Prefix>16</Prefix> 
            </Route>
            <Route wcm:action="add">
               <Identifier>10</Identifier> 
               <Metric>29</Metric> 
               <NextHopAddress>12.34.56.0</NextHopAddress> 
               <Prefix>24</Prefix> 
            </Route>
         </Routes>
      </Interface>
      <Interface wcm:action="add">
         <Ipv4Settings>
            <DhcpEnabled>true</DhcpEnabled> 
            <Metric>20</Metric> 
            <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled> 
         </Ipv4Settings>
         <Ipv6Settings>
            <DhcpEnabled>false</DhcpEnabled> 
            <Metric>10</Metric> 
            <RouterDiscoveryEnabled>true</RouterDiscoveryEnabled> 
         </Ipv6Settings>
         <Identifier>Local Area Connection</Identifier> 
         <UnicastIpAddresses>
            <IpAddress wcm:action="add" wcm:keyValue="1">123.45.67.8</IpAddress> 
            </UnicastIpAddresses>
         <Routes>
            <Route wcm:action="add">
               <Identifier>1</Identifier> 
               <Metric>10</Metric> 
               <NextHopAddress>12.34.0.0</NextHopAddress> 
               <Prefix>16</Prefix> 
            </Route>
         </Routes>
      </Interface>
   </Interfaces>
</component>

Ipv4SettingsIpv4Settings