RouterDiscoveryEnabledRouterDiscoveryEnabled

RouterDiscoveryEnabled 控制項是否路由器探索通訊協定 — 而這會通知主機路由器的存在 — 啟用 IPv6 通訊協定。RouterDiscoveryEnabled controls whether the router discovery protocol—which informs hosts of the existence of routers—is enabled for the IPv6 protocol. 此設定會控制在 RFC 2461 中定義的 IPv6 鄰居探索通訊協定。This setting controls the IPv6 Neighbor Discovery protocol defined in RFC 2461.

Values

truetrue

啟用路由器探索 IPv6 通訊協定,此介面上。Enables router discovery for the IPv6 protocol on this interface. 這是預設值。This is the default value.

falsefalse

停用此介面上的 IPv6 通訊協定的路由器探索。Disables router discovery for the IPv6 protocol on this interface.

有效的設定階段Valid Configuration Passes

特製化specialize

windowsPEwindowsPE

父階層Parent Hierarchy

Microsoft-Windows-TCPIP | Interfaces | Interface | Ipv6Settings | RouterDiscoveryEnabledMicrosoft-Windows-TCPIP | Interfaces | Interface | Ipv6Settings | RouterDiscoveryEnabled

套用至Applies To

如需 Windows 版本與此元件支援的架構清單,請參閱Microsoft-Windows-TCPIPFor the list of the Windows editions and architectures that this component supports, see Microsoft-Windows-TCPIP.

XML 範例XML Example

下列的 XML 輸出會顯示如何設定為 TCPIP。The following XML output shows how to configure TCPIP.

<component name="Microsoft-Windows-TCPIP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <Interfaces>
   <!-- Add static IP address (192.168.0.1/24, ffff:1::3/48) & route (12.34.0.0/16) to interface with identifier "Ethernet 1" -->      <Interface wcm:action="add">
         <Ipv4Settings>
            <DhcpEnabled>true</DhcpEnabled> 
            <Metric>20</Metric> 
            <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled> 
         </Ipv4Settings>
         <Ipv6Settings>
            <DhcpEnabled>false</DhcpEnabled> 
            <Metric>30</Metric> 
            <RouterDiscoveryEnabled>true</RouterDiscoveryEnabled> 
         </Ipv6Settings>
      <Identifier>Ethernet 1</Identifier>
         <UnicastIpAddresses>
           <IpAddress wcm:action="add" wcm:keyValue="1">192.168.0.1/24</IpAddress>
           <IpAddress wcm:action="add" wcm:keyValue="2">ffff:1::3/48</IpAddress>
         </UnicastIpAddresses>
         <Routes>
            <Route wcm:action="add">
               <Identifier>1</Identifier> 
               <Metric>10</Metric> 
               <NextHopAddress>12.34.0.0</NextHopAddress> 
               <Prefix>16</Prefix> 
            </Route>
            <Route wcm:action="add">
               <Identifier>10</Identifier> 
               <Metric>29</Metric> 
               <NextHopAddress>12.34.56.0</NextHopAddress> 
               <Prefix>24</Prefix> 
            </Route>
         </Routes>
      </Interface>
      <Interface wcm:action="add">
         <Ipv4Settings>
            <DhcpEnabled>true</DhcpEnabled> 
            <Metric>20</Metric> 
            <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled> 
         </Ipv4Settings>
         <Ipv6Settings>
            <DhcpEnabled>false</DhcpEnabled> 
            <Metric>10</Metric> 
            <RouterDiscoveryEnabled>true</RouterDiscoveryEnabled> 
         </Ipv6Settings>
         <Identifier>Local Area Connection</Identifier> 
         <UnicastIpAddresses>
            <IpAddress wcm:action="add" wcm:keyValue="1">123.45.67.8</IpAddress> 
            </UnicastIpAddresses>
         <Routes>
            <Route wcm:action="add">
               <Identifier>1</Identifier> 
               <Metric>10</Metric> 
               <NextHopAddress>12.34.0.0</NextHopAddress> 
               <Prefix>16</Prefix> 
            </Route>
         </Routes>
      </Interface>
   </Interfaces>
</component>

Ipv6SettingsIpv6Settings