NextHopAddressNextHopAddress

NextHopAddress 指定 路由中下一個躍點的 IP 位址。NextHopAddress specifies the IP address of the next hop in the Route.

NextHopAddress 也可以用來指定網路設定中的預設閘道。NextHopAddress can also be used to specify the default gateway in network configuration.

路由下的設定必須以下列順序新增: Identifier公制NextHopAddress,然後再加上前置詞。The settings under Route must be added in the following order: Identifier, Metric, NextHopAddress, and then Prefix. 在 Windows SIM 中儲存自動安裝檔案之後,請在 XML 檔案中確認輸出會以正確的順序顯示,如下列 XML 範例所示。After saving your Unattend file in Windows SIM, verify in the XML file that the output is shown in the correct order, as shown in the XML example below.

Values

NexthopaddressNexthopaddress

指定 路由中下一個躍點的 IP 位址。Specifies the IP address of the next hop in the Route. Nexthopaddress 是最大長度為45個字元的字串。Nexthopaddress is a string with a maximum length of 45 characters.

這種字串不支援空的元素。This string type does not support empty elements. 請勿為這種字串建立空值。Do not create an empty value for this setting.

有效的設定階段Valid Configuration Passes

特殊化specialize

windowsPEwindowsPE

父階層Parent Hierarchy

Microsoft-Windows-TCPIP | 介面 | 介面 | 路由 | 路由 | NextHopAddressMicrosoft-Windows-TCPIP | Interfaces | Interface | Routes | Route | NextHopAddress

套用至Applies To

如需此元件支援的 Windows 版本和架構清單,請參閱 Microsoft windows-TCPIPFor a list of the Windows editions and architectures that this component supports, see Microsoft-Windows-TCPIP.

XML 範例XML Example

下列 XML 輸出顯示如何設定 TCPIP。The following XML output shows how to configure TCPIP.

<component name="Microsoft-Windows-TCPIP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <Interfaces>
   <!-- Add static IP address (192.168.0.1/24, ffff:1::3/48) & route (12.34.0.0/16) to interface with identifier "Ethernet 1" -->      <Interface wcm:action="add">
         <Ipv4Settings>
            <DhcpEnabled>true</DhcpEnabled> 
            <Metric>20</Metric> 
            <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled> 
         </Ipv4Settings>
         <Ipv6Settings>
            <DhcpEnabled>false</DhcpEnabled> 
            <Metric>30</Metric> 
            <RouterDiscoveryEnabled>true</RouterDiscoveryEnabled> 
         </Ipv6Settings>
      <Identifier>Ethernet 1</Identifier>
         <UnicastIpAddresses>
           <IpAddress wcm:action="add" wcm:keyValue="1">192.168.0.1/24</IpAddress>
           <IpAddress wcm:action="add" wcm:keyValue="2">ffff:1::3/48</IpAddress>
         </UnicastIpAddresses>
         <Routes>
            <Route wcm:action="add">
               <Identifier>1</Identifier> 
               <Metric>10</Metric> 
               <NextHopAddress>12.34.0.0</NextHopAddress> 
               <Prefix>16</Prefix> 
            </Route>
            <Route wcm:action="add">
               <Identifier>10</Identifier> 
               <Metric>29</Metric> 
               <NextHopAddress>12.34.56.0</NextHopAddress> 
               <Prefix>24</Prefix> 
            </Route>
         </Routes>
      </Interface>
      <Interface wcm:action="add">
         <Ipv4Settings>
            <DhcpEnabled>true</DhcpEnabled> 
            <Metric>20</Metric> 
            <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled> 
         </Ipv4Settings>
         <Ipv6Settings>
            <DhcpEnabled>false</DhcpEnabled> 
            <Metric>10</Metric> 
            <RouterDiscoveryEnabled>true</RouterDiscoveryEnabled> 
         </Ipv6Settings>
         <Identifier>Local Area Connection</Identifier> 
         <UnicastIpAddresses>
            <IpAddress wcm:action="add" wcm:keyValue="1">123.45.67.8</IpAddress> 
            </UnicastIpAddresses>
         <Routes>
            <Route wcm:action="add">
               <Identifier>1</Identifier> 
               <Metric>10</Metric> 
               <NextHopAddress>12.34.0.0</NextHopAddress> 
               <Prefix>16</Prefix> 
            </Route>
         </Routes>
      </Interface>
   </Interfaces>
</component>
<Interfaces>
   <Interface wcm:action="add">
      <Ipv4Settings>
         <DhcpEnabled>true</DhcpEnabled> 
         <Metric>20</Metric> 
         <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled> 
      </Ipv4Settings>
      <Ipv6Settings>
         <DhcpEnabled>false</DhcpEnabled> 
         <Metric>30</Metric> 
         <RouterDiscoveryEnabled>true</RouterDiscoveryEnabled> 
      </Ipv6Settings>
      <Identifier>123</Identifier>
      <UnicastIpAddresses>
        <IpAddress wcm:action="add" wcm:keyValue="1">192.168.0.1/24</IpAddress>
        <IpAddress wcm:action="add" wcm:keyValue="2">ffff:1::3/48</IpAddress>
      </UnicastIpAddresses>
      <Routes>
         <Route wcm:action="add">
            <Identifier>1</Identifier> 
            <Metric>10</Metric> 
            <NextHopAddress>12.34.0.0</NextHopAddress> 
            <Prefix>16</Prefix> 
         </Route>
         <Route wcm:action="add">
            <Identifier>10</Identifier> 
            <Metric>29</Metric> 
            <NextHopAddress>12.34.56.0</NextHopAddress> 
            <Prefix>24</Prefix> 
         </Route>
      </Routes>
   </Interface>
   <Interface wcm:action="add">
      <Ipv4Settings>
         <DhcpEnabled>true</DhcpEnabled> 
         <Metric>20</Metric> 
         <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled> 
      </Ipv4Settings>
      <Ipv6Settings>
         <DhcpEnabled>false</DhcpEnabled> 
         <Metric>10</Metric> 
         <RouterDiscoveryEnabled>true</RouterDiscoveryEnabled> 
      </Ipv6Settings>
      <Identifier>456</Identifier> 
      <UnicastIpAddresses>
         <IpAddress wcm:action="add" wcm:keyValue="1">123.45.67.8</IpAddress> 
         </UnicastIpAddresses>
      <Routes>
         <Route wcm:action="add">
            <Identifier>1</Identifier> 
            <Metric>10</Metric> 
            <NextHopAddress>12.34.0.0</NextHopAddress> 
            <Prefix>16</Prefix> 
         </Route>
      </Routes>
   </Interface>
</Interfaces>

路由Route