針對自訂登入進行疑難排解Troubleshooting Custom Logon

本節將重點放在使用自訂登入時可能會遇到的一些常見問題。This section highlights some common issues that you may encounter when using Custom Logon.

當自動登入已啟用時,裝置會在從睡眠或休眠狀態恢復時要求輸入密碼When automatic sign-in is enabled, the device asks for a password when resuming from sleep or hibernate

當您的裝置設定為在從睡眠狀態喚醒時需要密碼時,就會發生這種情況。This can occur when your device is configured to require a password when waking up from a sleep state.

若要在喚醒時停用密碼保護To disable password protection on wake up

  1. 如果您已在裝置上啟用寫入篩選器,請執行下列步驟來停用它們,讓您可以儲存設定變更:If you have write filters enabled on your device, perform the following steps to disable them so that you can save setting changes:

    1. 在系統管理員命令提示字元中,輸入下列命令:At an administrator command prompt, type the following command:

      uwfmgr.exe filter disable
      
    2. 若要重新開機裝置,請輸入下列命令:To restart the device, type the following command:

      uwfmgr.exe restart
      
  2. 在 [主] 面板中,搜尋 [電源選項],然後按一下 [電源選項] 標題。In Contol Panel, search for Power Options , and then click the Power Options heading.

  3. 在 [電源選項] 標題下,按一下 [喚醒時需要密碼]。Under the Power Options heading, click Require a password on wakeup.

  4. 在 [定義電源按鈕並開啟密碼保護] 頁面上的 [在喚醒時密碼保護] 底下,選取 [不需要密碼]。On the Define power buttons and turn on password protection page, under Password protection on wakeup, select Don’t require a password.

  5. 如果您停用寫入篩選器,請執行下列步驟來重新啟用它們:If you disabled write filters, perform the following steps to enable them again:

    1. 在系統管理員命令提示字元中,輸入下列命令:At an administrator command prompt, type the following command:

      uwfmgr.exe filter enable
      
    2. 若要重新開機裝置,請輸入下列命令:To restart the device, type the following command:

      uwfmgr.exe restart
      

裝置會在安裝期間顯示黑色畫面The device displays a black screen during setup

將 [ HideAutoLogonUI ] 和 [ AnimationDisabled ] 設定設為0 (零)。Set the HideAutoLogonUI and AnimationDisabled settings to 0 (zero). 裝置接著會在安裝期間顯示預設畫面。The device will then display a default screen during setup.

當按下 Ctrl + Alt + Del 時,裝置會顯示黑色畫面The device displays a black screen when Ctrl+Alt+Del is pressed

HideAutoLogonUIForceAutoLogon在一起使用時有已知的問題。HideAutoLogonUI andForceAutoLogon have known issues when used together. 若要避免黑屏,建議您使用鍵盤篩選器來封鎖此按鍵組合。To avoid a black screen, we recommend you use Keyboard Filter to block this key combination.

當使用 Windows 鍵 + L 來鎖定裝置時,裝置會顯示黑色畫面The device displays a black screen when Windows key + L is used to lock the device

HideAutoLogonUIForceAutoLogon在一起使用時有已知的問題。HideAutoLogonUI and ForceAutoLogon have known issues when used together. 若要避免黑屏,建議您使用鍵盤篩選器來封鎖此按鍵組合。To avoid a black screen, we recommend you use Keyboard Filter to block this key combination.

當 [記事本] 開啟時,裝置會顯示黑色畫面、輸入任何字元和目前使用者登出,或裝置已重新開機,或裝置已關閉The device displays a black screen when Notepad is opened, any characters are typed and the current user signs out, or the device is rebooted, or the device is shut down

HideAutoLogonUIForceAutoLogon在一起使用時有已知的問題。HideAutoLogonUI and ForceAutoLogon have known issues when used together. 若要避免黑屏,建議您停用 [封鎖的關機解析程式] 畫面(BSDR)。To avoid a black screen, we recommend you disable the Blocked Shutdown Resolver Screen (BSDR).

警告

停用 [BSDR] 畫面時,重新開機或關閉裝置會導致 OS 立即強制關閉任何封鎖系統關機的已開啟應用程式。When the BSDR screen is disabled, restarting or shutting down the device causes the OS to immediately force close any open applications that are blocking system shutdown. 不會顯示任何 UI,使用者也不會有機會取消關機程式。No UI is displayed, and users are not given a chance to cancel the shutdown process. 如果任何開啟的應用程式都有未儲存的資料,這可能會導致資料遺失。This can result in lost data if any open applications have unsaved data.

裝置暫停然後繼續時,會顯示黑色畫面The device displays a black screen when the device is suspended and then resumed

HideAutoLogonUIForceAutoLogon在一起使用時有已知的問題。HideAutoLogonUI and ForceAutoLogon have known issues when used together. 若要避免黑屏,建議您在喚醒時停用密碼保護。To avoid a black screen, we recommend you disable the password protection on wakeup.

若要在喚醒時停用密碼保護To disable password protection on wakeup

  1. 在 [控制台] 中,按一下 [電源選項]。In Control Panel, click Power Options.

  2. 在 [電源選項] 專案中,按一下 [喚醒時需要密碼]。In the Power Options item, click Require a password on wakeup.

  3. 在 [定義電源按鈕並開啟密碼保護] 頁面上的 [在喚醒時密碼保護] 底下,選取 [不需要密碼]。On the Define power buttons and turn on password protection page, under Password protection on wakeup, select Don’t require a password.

顯示 [密碼到期] 畫面時,裝置會顯示黑色畫面The device displays a black screen when a password expiration screen is displayed

HideAutoLogonUI有已知的問題。HideAutoLogonUI has a known issue. 若要避免黑屏,建議您將密碼設定為永不過期。To avoid a black screen, we recommend you set the password to never expire.

將個別使用者帳戶的密碼設定為永不過期To set a password to never expire on an individual user account

  1. 在您的裝置上,以系統管理員許可權開啟命令提示字元。On your device, open a command prompt with administrator privileges.

  2. 輸入下列文字,以您想要移除密碼到期的帳戶名稱取代 <accountname>Type the following, replacing <accountname> with the name of the account you want to remove the password expiration from.

    net accounts <accountname> /expires:never
    

將所有使用者帳戶上的密碼設定為永不過期To set passwords to never expire on all user accounts

  1. 在您的裝置上,以系統管理員許可權開啟命令提示字元。On your device, open a command prompt with administrator privileges.

  2. 輸入下列Type the following

    net accounts /MaxPWAge:unlimited
    

自訂登入Custom Logon

自訂登入的互補功能Complementary features to Custom Logon