讓 vRSS Virtual 網路介面卡Enable vRSS on a Virtual Network Adapter

適用於:Windows Server(以每年次管道)、Windows Server 2016Applies To: Windows Server (Semi-Annual Channel), Windows Server 2016

vRSS 需要一樣佇列 (VMQ) 支援實體介面卡。vRSS requires Virtual Machine Queue (VMQ) support from the physical adapter. 如果 VMQ 已停用,或不支援然後虛擬接收端縮放比例已停用。If VMQ is disabled, or is not supported then Virtual Receive-side scaling is disabled.

如需詳細資訊,請查看計劃 vRSS 使用For more information, see Plan the Use of vRSS.

讓 vRSS 上 VMEnable vRSS on a VM

您可以使用下列程序,以便 vRSS 使用 Windows PowerShell 或 [裝置管理員]。You can use the following procedures to enable vRSS by using either Windows PowerShell or Device Manager.

以便 vRSS VM 上的使用 「 裝置管理員 」To enable vRSS on a VM by using Device Manager

您可以使用此程序,以便使用 「 裝置管理員 」 vRSS。You can use this procedure to enable vRSS by using Device Manager.

注意

此程序的第一個步驟是執行 Windows 10 或 Windows Server 2016 Vm 特定。The first step in this procedure is specific to VMs that are running Windows 10 or Windows Server 2016. 如果您 VM 執行其他作業系統,您可以開放裝置管理員] 中第一次控制台,然後找出並打開裝置管理員]。If your VM is running a different operating system, you can open Device Manager by first opening Control Panel, then locating and opening Device Manager.

  1. VM 工作列,在在此輸入搜尋,輸入裝置On the VM task bar, in Type here to search, type device. 在搜尋結果中,按一下 [裝置管理員]In search results, click Device Manager.

  2. 按一下 [裝置管理員] 中,展開[網路介面卡In Device Manager, click to expand Network adapters. 以滑鼠右鍵按一下您想要設定,然後按一下 [網路介面卡屬性Right-click the network adapter you want to configure, and then click Properties. 網路介面卡屬性對話方塊。The network adapter Properties dialog box opens.

  3. 在 [網路介面卡屬性,按一下 [進階]索引標籤。在屬性、向下捲動並按一下 [接收端縮放比例In network adapter Properties, click the Advanced tab. In Property, scroll down to and click Receive-side scaling. 確保中的選取項目啟用Ensure that the selection in Value is Enabled.

  4. 按一下[確定]Click OK.

注意

進階索引標籤上,有些網路介面卡也會顯示 RSS 佇列介面卡所支援的數目。On the Advanced tab, some network adapters also display the number of RSS queues that are supported by the adapter.

使用 Windows PowerShell 來以便 vRSS 上 VMTo enable vRSS on a VM by using Windows PowerShell

若要使用 Windows PowerShell 來讓 vRSS,您可以使用下列程序。You can use the following procedure to enable vRSS by using Windows PowerShell.

  1. 上一樣,請打開Windows PowerShellOn the virtual machine, open Windows PowerShell.

  2. 輸入下列命令,確保您取代AdapterName的值為-名稱參數您想要設定,然後按 ENTER 鍵的網路介面卡的名稱。Type the following command, ensuring that you replace the AdapterName value for the -Name parameter with the name of the network adapter that you want to configure, and then press ENTER.

Enable-NetAdapterRSS -Name "AdapterName"

或者,您可以使用下列命令,可讓 vRSS。Alternately, you can use the following command to enable vRSS.

Set-NetAdapterRSS -Name "AdapterName" -Enabled $True  

如需詳細資訊,請查看Windows PowerShell 命令 RSS 和 vRSSFor more information, see Windows PowerShell Commands for RSS and vRSS.