管理其他 Windows Update 設定Manage additional Windows Update settings

適用於Applies to

  • Windows 10Windows10

正在尋找消費者資訊嗎?Looking for consumer information? 請參閱 Windows Update:常見問題集See Windows Update: FAQ

您可以使用群組原則設定或行動裝置管理 (MDM) 來設定 Windows 10 裝置上 Windows Update (WU) 的行為。You can use Group Policy settings or mobile device management (MDM) to configure the behavior of Windows Update (WU) on your Windows 10 devices. 您可以設定更新偵測頻率、選取何時接收更新、指定更新服務位置,以及更其他各種設定。You can configure the update detection frequency, select when updates are received, specify the update service location and more.

Windows Update 設定摘要Summary of Windows Update settings

群組原則設定Group Policy setting MDM 設定MDM setting 開始支援的版本Supported from version
指定近端內部網路 Microsoft 更新服務的位置Specify Intranet Microsoft update service location UpdateServiceUrlUpdateServiceUrlAlternateUpdateServiceUrl and UpdateServiceUrlAlternate 全部All
自動更新偵測頻率Automatic Updates Detection Frequency DetectionFrequencyDetectionFrequency 17031703
移除對使用所有 Windows Update 功能的存取Remove access to use all Windows Update features Update/SetDisableUXWUAccessUpdate/SetDisableUXWUAccess 全部All
不連接到任何 Windows Update 網際網路位置Do not connect to any Windows Update Internet locations 全部All
啟用用戶端目標Enable client-side targeting 全部All
允許來自近端內部網路 Microsoft 更新服務位置的已簽署更新Allow signed updates from an intranet Microsoft update service location AllowNonMicrosoftSignedUpdateAllowNonMicrosoftSignedUpdate 全部All
不包含 Windows 更新的驅動程式Do not include drivers with Windows Updates ExcludeWUDriversInQualityUpdateExcludeWUDriversInQualityUpdate 16071607
設定自動更新Configure Automatic Updates AllowAutoUpdateAllowAutoUpdate 全部All

重要

有關管理更新後裝置重新啟動和重新啟動通知的其他設定相關資訊,會在**管理更新後裝置重新啟動** 提供。Additional information about settings to manage device restarts and restart notifications for updates is available on Manage device restarts after updates.

設定收到功能和品質更新的時間的其他設定會在**設定商務用 Windows Update** 詳述。Additional settings that configure when Feature and Quality updates are received are detailed on Configure Windows Update for Business.

掃描更新Scanning for updates

在 Windows 10 中,系統管理員在設定裝置掃描和接收更新的方式上擁有許多彈性。With Windows 10, admins have a lot of flexibility in configuring how their devices scan and receive updates.

指定近端內部網路 Microsoft 更新服務的位置允許系統管理員將裝置指向內部 Microsoft 更新服務的位置,而請勿連接到 Windows Update 網際網路的任何位置可讓他們選擇將裝置限於該內部更新服務。Specify Intranet Microsoft update service location allows admins to point devices to an internal Microsoft update service location, while Do not connect to any Windows Update Internet locations gives them to option to restrict devices to just that internal update service. 自動更新偵測頻率負責控制裝置掃描更新的頻率。Automatic Updates Detection Frequency controls how frequently devices scan for updates.

您可以使用啟用用戶端目標鎖定,建立自訂裝置群組與內部 Microsoft Update 服務搭配使用。You can make custom device groups that'll work with your internal Microsoft update service by using Enable client-side targeting. 您也可以確保裝置從內部 Microsoft 更新服務接收未經 Microsoft 簽署的更新,透過允許來自近端內部網路 Microsoft 更新服務位置的已簽署更新You can also make sure your devices receive updates that were not signed by Microsoft from your internal Microsoft update service, through Allow signed updates from an intranet Microsoft update service location.

最後,若要確保更新體驗完全由系統管理員控制,您可以針對使用者移除使用所有 Windows Update 功能的存取Finally, to make sure the updating experience is fully controlled by the admins, you can Remove access to use all Windows Update features for users.

設定收到功能和品質更新的時間的其他設定會在設定商務用 Windows Update 詳述。For additional settings that configure when Feature and Quality updates are received, see Configure Windows Update for Business.

指定近端內部網路 Microsoft 更新服務的位置Specify Intranet Microsoft update service location

指定託管來自 Microsoft Update 之更新的內部伺服器。Specifies an intranet server to host updates from Microsoft Update. 然後您可以使用此更新服務自動更新網路上的電腦。You can then use this update service to automatically update computers on your network. 這項設定可讓您指定網路上的伺服器做為內部更新服務。This setting lets you specify a server on your network to function as an internal update service. 自動更新用戶端將搜尋此服務是否有更新可用於網路上的電腦。The Automatic Updates client will search this service for updates that apply to the computers on your network.

若要在群組原則中使用此設定,請前往 [電腦設定\系統管理範本\Windows 元件\Windows Update\指定近端內部網路 Microsoft 更新服務的位置]。To use this setting in Group Policy, go to Computer Configuration\Administrative Templates\Windows Components\Windows Update\Specify Intranet Microsoft update service location. 您必須設定兩個伺服器名稱值:自動更新用戶端偵測和下載更新的來源伺服器,以及更新的工作站上傳統計資料的目標伺服器。You must set two server name values: the server from which the Automatic Updates client detects and downloads updates, and the server to which updated workstations upload statistics. 您可以將這兩個值設定為相同伺服器。You can set both values to be the same server. 可以指定選用的伺服器名稱值來設定 Windows Update 代理程式,從其他下載伺服器下載更新,而非近端內部網路更新服務。An optional server name value can be specified to configure Windows Update Agent to download updates from an alternate download server instead of the intranet update service.

如果此設定設為 [已啟用],自動更新用戶端就會連線到指定的近端內部網路 Microsoft 更新服務 (或替代的下載伺服器),而不是 Windows Update,以搜尋並下載更新。If the setting is set to Enabled, the Automatic Updates client connects to the specified intranet Microsoft update service (or alternate download server), instead of Windows Update, to search for and download updates. 啟用這個設定表示組織中的使用者不必通過防火牆就能取得更新,也讓您有機會在部署之後測試更新。Enabling this setting means that end users in your organization don’t have to go through a firewall to get updates, and it gives you the opportunity to test updates after deploying them. 如果此設定設為 [已停用] 或 [未設定],而且原則或使用者喜好設定並未停用自動更新,則自動更新用物端會直接連線到網際網路上的 Windows Update 網站。If the setting is set to Disabled or Not Configured, and if Automatic Updates is not disabled by policy or user preference, the Automatic Updates client connects directly to the Windows Update site on the Internet.

替代下載伺服器名會設定 Windows Update 代理程式,從其他下載伺服器下載更新檔案,而非近端內部網路更新服務。The alternate download server configures the Windows Update Agent to download files from an alternative download server instead of the intranet update service. 下載沒有 URL 的檔案這個選項可從替代下載伺服器下載內容,當更新中繼資料中的檔案沒有下載 URL 時。The option to download files with missing Urls allows content to be downloaded from the Alternate Download Server when there are no download Urls for files in the update metadata. 這個選項只適合在近端內部網路更新服務未在位於替代下載伺服器上的檔案更新中繼資料中提供下載 URL 時使用。This option should only be used when the intranet update service does not provide download Urls in the update metadata for files which are present on the alternate download server.

注意

如果 [設定自動更新] 原則已停用,此原則就沒有作用。If the "Configure Automatic Updates" policy is disabled, then this policy has no effect.

如果未設定 [替代下載伺服器],預設將會使用近端內部網路更新服務下載更新。If the "Alternate Download Server" is not set, it will use the intranet update service by default to download updates.

[下載沒有 URL 的檔案...] 選項只有在設定了 [替代下載伺服器] 時使用。The option to "Download files with no Url..." is only used if the "Alternate Download Server" is set.

若要使用 MDM 設定這項原則,請使用 UpdateServiceUrlUpdateServiceUrlAlternateTo configure this policy with MDM, use UpdateServiceUrl and UpdateServiceUrlAlternate.

自動更新偵測頻率Automatic Updates detection frequency

指定 Windows 用來判斷檢查可用更新之前的等待時間,以小時為單位。Specifies the hours that Windows will use to determine how long to wait before checking for available updates. 確實等待時間的決定方式,是使用這裡指定的時數減去所指定時數的 0 到 20%。The exact wait time is determined by using the hours specified here minus zero to twenty percent of the hours specified. 例如,如果使用這項原則指定 20 小時偵測頻率,則套用這項原則的所有用戶端都會在 16 到 20 小時之間檢查更新。For example, if this policy is used to specify a 20-hour detection frequency, then all clients to which this policy is applied will check for updates anywhere between 16 to 20 hours.

若要透過群組原則設定此設定,請瀏覽 [電腦設定\系統管理範本\Windows 元件\Windows Update\自動更新偵測頻率]。To set this setting with Group Policy, navigate to Computer Configuration\Administrative Templates\Windows Components\Windows Update\Automatic Updates detection frequency.

如果此設定設為 [已啟用],Windows 會依指定的時間間隔檢查可用的更新。If the setting is set to Enabled, Windows will check for available updates at the specified interval. 如果此設定設為 [已停用] 或 [未設定],Windows 會依預設時間間隔 22 小時檢查更新。If the setting is set to Disabled or Not Configured, Windows will check for available updates at the default interval of 22 hours.

注意

[指定近端內部網路 Microsoft 更新服務的位置] 設定必須啟用,此原則才能生效。The “Specify intranet Microsoft update service location” setting must be enabled for this policy to have effect.

如果 [設定自動更新] 原則已停用,此原則就沒有作用。If the “Configure Automatic Updates” policy is disabled, this policy has no effect.

若要使用 MDM 設定這項原則,請使用 DetectionFrequencyTo configure this policy with MDM, use DetectionFrequency.

移除對使用所有 Windows Update 功能的存取Remove access to use all Windows Update features

透過啟用 [電腦設定\系統管理範本\Windows 元件\Windows update\移除使用所有 Windows Update 功能的存取] 下的群組原則設定,系統管理員可以停用使用者的 [檢查更新] 選項。By enabling the Group Policy setting under Computer Configuration\Administrative Templates\Windows Components\Windows update\Remove access to use all Windows update features, administrators can disable the "Check for updates" option for users. 任何背景更新掃描、下載和安裝將會繼續如設定般運作。Any background update scans, downloads and installations will continue to work as configured.

不連接到任何 Windows Update 網際網路位置Do not connect to any Windows Update Internet locations

即使 Windows Update 設定為從近端內部網路更新服務接收更新,它仍會定期從公用 Windows Update 服務接收資訊,以便未來與 Microsoft Update 連線,以及接收其他服務 (像是 Microsoft Update 或 Microsoft Store) 的資訊。Even when Windows Update is configured to receive updates from an intranet update service, it will periodically retrieve information from the public Windows Update service to enable future connections to Windows Update, and other services like Microsoft Update or the Microsoft Store.

使用 [電腦設定\系統管理範本\Windows 元件\Windows Update\請勿連接到 Windows Update 網際網路的任何位置] 啟用此原則。Use Computer Configuration\Administrative Templates\Windows Components\Windows update\Do not connect to any Windows Update Internet locations to enable this policy. 啟用時,這項原則會停用上述功能,而且可能會造成與公用服務 (如 Microsoft Store、商務用 Windows Update 及傳遞最佳化) 的連線停止運作。When enabled, this policy will disable the functionality described above, and may cause connection to public services such as the Microsoft Store, Windows Update for Business and Delivery Optimization to stop working.

注意

這項原則只在裝置設定為使用 [指定近端內部網路 Microsoft 更新服務的位置] 原則連線到近端內部網路更新服務時套用。This policy applies only when the device is configured to connect to an intranet update service using the "Specify intranet Microsoft update service location" policy.

啟用用戶端目標鎖定Enable client-side targeting

指定應用來從近端內部網路 Microsoft 更新服務接收更新的目標群組名稱。Specifies the target group name or names that should be used to receive updates from an intranet Microsoft update service. 這可讓系統管理員設定裝置群組,用來接收像是 WSUS 或 Configuration Manager 等來源的不同更新。This allows admins to configure device groups that will receive different updates from sources like WSUS or Configuration Manager.

您可以在 [電腦設定\系統管理範本\Windows 元件\Windows Update\啟用用戶端目標鎖定] 底下找到此群組原則設定。This Group Policy setting can be found under Computer Configuration\Administrative Templates\Windows Components\Windows update\Enable client-side targeting. 如果此設定設為 [已啟用],指定的目標群組資訊會傳送到近端內部網路 Microsoft 更新服務,該服務會用它來判斷哪些更新應部署到此電腦。If the setting is set to Enabled, the specified target group information is sent to the intranet Microsoft update service which uses it to determine which updates should be deployed to this computer. 如果此設定設為 [已停用] 或 [未設定],則不會將目標群組資訊傳送至近端內部網路 Microsoft 更新服務。If the setting is set to Disabled or Not Configured, no target group information will be sent to the intranet Microsoft update service.

如果近端內部網路 Microsoft 更新服務支援多個目標群組,這個原則可以指定多個群組名稱,以分號分隔。If the intranet Microsoft update service supports multiple target groups, this policy can specify multiple group names separated by semicolons. 否則必須指定單一群組。Otherwise, a single group must be specified.

注意

這項原則只有在裝置導向的目標近端內部網路 Microsoft 更新服務設定為支援用戶端目標鎖定時才適用。This policy applies only when the intranet Microsoft update service the device is directed to is configured to support client-side targeting. 如果 [指定近端內部網路 Microsoft 更新服務的位置] 原則已停用或未設定,則此原則沒有作用。If the “Specify intranet Microsoft update service location” policy is disabled or not configured, this policy has no effect.

允許來自近端內部網路 Microsoft 更新服務位置的已簽署更新Allow signed updates from an intranet Microsoft update service location

這項原則設定可讓您管理自動更新是否接受 Microsoft 以外的實體簽署的更新,當近端內部網路 Microsoft 更新服務位置找到更新時。This policy setting allows you to manage whether Automatic Updates accepts updates signed by entities other than Microsoft when the update is found on an intranet Microsoft update service location.

若要在群組原則中設定此設定,請前往 [電腦設定\系統管理範本\Windows 元件\Windows Update\允許來自近端內部網路 Microsoft 更新服務位置的已簽署更新]。To configure this setting in Group Policy, go to Computer Configuration\Administrative Templates\Windows Components\Windows update\Allow signed updates from an intranet Microsoft update service location.

如果您啟用此原則設定,自動更新會依照指定近端內部網路 Microsoft 更新服務的位置所指定,接受透過近端內部網路 Microsoft 更新服務位置接收的更新,如果更新是由本機電腦的 [受信任的發行者] 憑證存放區中找到的憑證簽署。If you enable this policy setting, Automatic Updates accepts updates received through an intranet Microsoft update service location, as specified by Specify Intranet Microsoft update service location, if they are signed by a certificate found in the “Trusted Publishers” certificate store of the local computer. 如果您停用或未設定這項原則設定,則必須由 Microsoft 簽署來自近端內部網路 Microsoft 更新服務位置的更新。If you disable or do not configure this policy setting, updates from an intranet Microsoft update service location must be signed by Microsoft.

注意

近端內部網路 Microsoft 更新服務以外的服務更新必須一律由 Microsoft 簽署,而且不受此原則設定影響。Updates from a service other than an intranet Microsoft update service must always be signed by Microsoft and are not affected by this policy setting.

若要使用 MDM 設定這項原則,請使用 AllowNonMicrosoftSignedUpdateTo configure this policy with MDM, use AllowNonMicrosoftSignedUpdate.

安裝更新Installing updates

若要讓更新程序更富彈性,有些設定可用來控制更新安裝。To add more flexibility to the update process, settings are available to control update installation.

[設定自動更新]](#configure-automatic-updates)提供 4 個不同的自動更新安裝選項,而不包含 Windows 更新的驅動程式可確保不會隨接收的其餘更新安裝驅動程式。Configure Automatic Updates offers 4 different options for automatic update installation, while Do not include drivers with Windows Updates makes sure drivers are not installed with the rest of the received updates.

不包含 Windows 更新的驅動程式Do not include drivers with Windows Updates

允許系統管理員在更新期間排除 Windows Update (WU) 驅動程式。Allows admins to exclude Windows Update (WU) drivers during updates.

若要在群組原則中設定此設定,請使用 [電腦設定\系統管理範本\Windows 元件\Windows Update\不包含 Windows 更新的驅動程式]。To configure this setting in Group Policy, use Computer Configuration\Administrative Templates\Windows Components\Windows update\Do not include drivers with Windows Updates. 啟用這項原則就不會在 Windows 品質更新中包含驅動程式。Enable this policy to not include drivers with Windows quality updates. 如果您停用或未設定這項原則,Windows Update 將會包含有驅動程式分類的更新。If you disable or do not configure this policy, Windows Update will include updates that have a Driver classification.

設定自動更新Configure Automatic Updates

讓 IT 系統管理員管理掃描、下載,以及安裝更新的自動更新行為。Enables the IT admin to manage automatic update behavior to scan, download, and install updates.

使用群組原則設定自動更新Configuring Automatic Updates by using Group Policy

電腦設定\系統管理範本\Windows 元件\Windows Update\設定自動更新底下,您必須選取四個選項的其中一個:Under Computer Configuration\Administrative Templates\Windows Components\Windows update\Configure Automatic Updates, you must select one of the four options:

2 - 通知下載並自動安裝更新 - 當 Windows 找到適用於此裝置的更新時,使用者將會收到已準備好下載更新的通知。2 - Notify for download and auto install - When Windows finds updates that apply to this device, users will be notified that updates are ready to be downloaded. 前往 [設定 > 更新與安全性 > Windows Update] 之後,使用者可以下載及安裝任何可用的更新。After going to Settings > Update & security > Windows Update, users can download and install any available updates.

3 - 自動下載和通知我安裝 - Windows 找到適用於裝置的更新並於背景進行下載 (在此過程中使用者不會收到通知或受到干擾)。3 - Auto download and notify for Install - Windows finds updates that apply to the device and downloads them in the background (the user is not notified or interrupted during this process). 下載完成時,使用者將會收到更新已準備好進行安裝的通知。When the downloads are complete, users will be notified that they are ready to install. 前往 [設定 > 更新與安全性 > Windows Update] 之後,使用者可以安裝它們。After going to Settings > Update & security > Windows Update, users can install them.

4 - 自動下載和排程安裝 - 使用群組原則設定中的選項指定排程。4 - Auto download and schedule the install - Specify the schedule using the options in the Group Policy Setting. 如需關於此設定的詳細資訊,請參閱排程更新安裝For more information about this setting, see Schedule update installation.

5 - 允許本機系統管理員選擇設定 - 使用這個選項時,本機系統管理員將可使用設定應用程式自行選取設定選項。5 - Allow local admin to choose setting - With this option, local administrators will be allowed to use the settings app to select a configuration option of their choice. 本機系統管理員不可停用自動更新的設定。Local administrators will not be allowed to disable the configuration for Automatic Updates.

如果此設定設為 [已停用],則必須手動下載和安裝 Windows Update 上提供的任何更新。If this setting is set to Disabled, any updates that are available on Windows Update must be downloaded and installed manually. 若要這樣做,使用者必須移至 [設定 > 更新與安全性 > Windows Update]。To do this, users must go to Settings > Update & security > Windows Update.

如果此設定設為 [未設定],系統管理員仍可以透過設定應用程式設定自動更新,在 [設定 > 更新與安全性 > Windows Update > 進階選項] 底下。If this setting is set to Not Configured, an administrator can still configure Automatic Updates through the settings app, under Settings > Update & security > Windows Update > Advanced options.

透過編輯登錄來設定自動更新Configuring Automatic Updates by editing the registry

注意

如果您使用登錄編輯程式或其他方法,不正確地修改登錄,可能會發生嚴重問題。Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. 這些問題可能需要您重新安裝作業系統。These problems might require you to reinstall the operating system. Microsoft 不能保證這些問題可以解決。Microsoft cannot guarantee that these problems can be resolved. 修改登錄的風險由您自負。Modify the registry at your own risk.

在沒有部署 Active Directory 的環境中,您可以編輯登錄設定,以設定自動更新的群組原則。In an environment that does not have Active Directory deployed, you can edit registry settings to configure group policies for Automatic Update.

若要這樣做,請執行下列步驟:To do this, follow these steps:

  1. 選取 [開始],搜尋 "regedit",然後開啟 [登錄編輯程式]。Select Start, search for "regedit", and then open Registry Editor.

  2. 開啟下列登錄機碼:Open the following registry key:

    HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU
    
  3. 新增下列其中一個登錄值來設定自動更新。Add one of the following registry values to configure Automatic Update.

    • NoAutoUpdate (REG_DWORD):NoAutoUpdate (REG_DWORD):

      • 0:啟用自動更新(預設)。0: Automatic Updates is enabled (default).

      • 1:自動更新已停用。1: Automatic Updates is disabled.

    • AUOptions (REG_DWORD):AUOptions (REG_DWORD):

      • 1:在 [自動更新] 中停用 [讓我的電腦保持在最新狀態]。1: Keep my computer up to date is disabled in Automatic Updates.

      • 2:通知下載和安裝。2: Notify of download and installation.

      • 3:自動下載並通知安裝。3: Automatically download and notify of installation.

      • 4:自動下載及排程安裝。4: Automatically download and scheduled installation.

    • ScheduledInstallDay (REG_DWORD):ScheduledInstallDay (REG_DWORD):

      • 0:每天。0: Every day.

      • 17:星期日 (1) 到星期六 (7) 的天數。1 through 7: The days of the week from Sunday (1) to Saturday (7).

    • ScheduledInstallTime (REG_DWORD):ScheduledInstallTime (REG_DWORD):

      n,其中n等於一天的時間,格式為24小時 (0-23)。n, where n equals the time of day in a 24-hour format (0-23).

    • UseWUServer (REG_DWORD)UseWUServer (REG_DWORD)

      將此值設定為1 ,將 [自動更新] 設定為使用執行軟體更新服務的伺服器,而不是 Windows Update。Set this value to 1 to configure Automatic Updates to use a server that is running Software Update Services instead of Windows Update.

    • RescheduleWaitTime (REG_DWORD)RescheduleWaitTime (REG_DWORD)

      m,其中m等於自動更新開始時,以及它在排程時間已過的時間開始安裝之間所要等待的時間週期。m, where m equals the time period to wait between the time Automatic Updates starts and the time that it begins installations where the scheduled times have passed. 時間設定為從1到60的分鐘數,表示1分鐘到60分鐘)The time is set in minutes from 1 to 60, representing 1 minute to 60 minutes)

      注意

      這個設定只會影響用戶端更新為 SUS SP1 用戶端版本或更新版本之後的用戶端行為。This setting only affects client behavior after the clients have updated to the SUS SP1 client version or later versions.

    • NoAutoRebootWithLoggedOnUsers (REG_DWORD):NoAutoRebootWithLoggedOnUsers (REG_DWORD):

      0 (false) 或 1 (true)。0 (false) or 1 (true). 如果設定為1,自動更新就不會在使用者登入時自動重新啟動電腦。If set to 1, Automatic Updates does not automatically restart a computer while users are logged on.

      注意

      在用戶端更新為 SUS SP1 用戶端版本或更新版本之後,此設定會影響用戶端行為。This setting affects client behavior after the clients have updated to the SUS SP1 client version or later versions.

若要在執行軟體更新服務的伺服器上使用自動更新,請參閱部署 Microsoft Windows Server Update Services 2.0 指南。To use Automatic Updates with a server that is running Software Update Services, see the Deploying Microsoft Windows Server Update Services 2.0 guidance.

當您使用原則登錄機碼直接設定自動更新時,原則會覆寫本機系統管理使用者所設定的喜好設定,以設定用戶端。When you configure Automatic Updates directly by using the policy registry keys, the policy overrides the preferences that are set by the local administrative user to configure the client. 如果系統管理員在日後移除登錄機碼,則會再次使用本機系統管理使用者所設定的喜好設定。If an administrator removes the registry keys at a later date, the preferences that were set by the local administrative user are used again.

若要判斷用戶端電腦和伺服器連線到哪個 WSUS 伺服器以取得更新,請將下列登錄值新增到登錄:To determine the WSUS server that the client computers and servers connect to for updates, add the following registry values to the registry:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\
  • WUServer (REG_SZ)WUServer (REG_SZ)

    此值會依 HTTP 名稱設定 WSUS 伺服器 (例如,http://IntranetSUS)。This value sets the WSUS server by HTTP name (for example, http://IntranetSUS).

  • WUStatusServer (REG_SZ)WUStatusServer (REG_SZ)

    此值會依 HTTP 名稱設定 SUS 統計資料伺服器 (例如, http://IntranetSUS)。This value sets the SUS statistics server by HTTP name (for example, http://IntranetSUS).

相關主題Related topics