Share via


az kusto cluster

Note

This command group has commands that are defined in both Azure CLI and at least one extension. Install each extension to benefit from its extended capabilities. Learn more about extensions.

This command group has been deprecated and will be removed in a future release. Use '"az extension add -n kusto" to install the supported Kusto extension' instead.

Manage Azure Kusto clusters.

This module will not be supported starting January 1, 2021. Please execute "az extension add -n kusto" to install the supported Kusto extension.

Commands

Name Description Type Status
az kusto cluster add-language-extension

Add a list of language extensions that can run within KQL queries.

Extension Experimental
az kusto cluster create

Create a Kusto cluster.

Core Deprecated
az kusto cluster create (kusto extension)

Create a Kusto cluster.

Extension Experimental
az kusto cluster delete

Delete a Kusto cluster.

Core Deprecated
az kusto cluster delete (kusto extension)

Deletes a Kusto cluster.

Extension Experimental
az kusto cluster detach-follower-database

Detaches all followers of a database owned by this cluster.

Extension Experimental
az kusto cluster diagnose-virtual-network

Diagnoses network connectivity status for external resources on which the service is dependent on.

Extension Experimental
az kusto cluster list

List a Kusto cluster.

Core Deprecated
az kusto cluster list (kusto extension)

Lists all Kusto clusters within a resource group. And Lists all Kusto clusters within a subscription.

Extension Experimental
az kusto cluster list-follower-database

Returns a list of databases that are owned by this cluster and were followed by another cluster.

Extension Experimental
az kusto cluster list-language-extension

Returns a list of language extensions that can run within KQL queries.

Extension Experimental
az kusto cluster list-outbound-network-dependency-endpoint

Gets the network endpoints of all outbound dependencies of a Kusto cluster.

Extension Experimental
az kusto cluster list-sku

Returns the SKUs available for the provided resource. And Lists eligible SKUs for Kusto resource provider.

Extension Experimental
az kusto cluster remove-language-extension

Remove a list of language extensions that can run within KQL queries.

Extension Experimental
az kusto cluster show

Get a Kusto cluster.

Core Deprecated
az kusto cluster show (kusto extension)

Gets a Kusto cluster.

Extension Experimental
az kusto cluster start

Start a Kusto cluster.

Core Deprecated
az kusto cluster start (kusto extension)

Starts a Kusto cluster.

Extension Experimental
az kusto cluster stop

Stop a Kusto cluster.

Core Deprecated
az kusto cluster stop (kusto extension)

Stops a Kusto cluster.

Extension Experimental
az kusto cluster update

Update a Kusto cluster.

Core Deprecated
az kusto cluster update (kusto extension)

Update a Kusto cluster.

Extension Experimental
az kusto cluster wait

Wait for a managed Kusto cluster to reach a desired state.

Core Deprecated
az kusto cluster wait (kusto extension)

Place the CLI in a waiting state until a condition of the kusto cluster is met.

Extension Experimental

az kusto cluster add-language-extension

Experimental

Command group 'kusto' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Add a list of language extensions that can run within KQL queries.

az kusto cluster add-language-extension [--cluster-name]
                                        [--ids]
                                        [--no-wait]
                                        [--resource-group]
                                        [--subscription]
                                        [--value]

Examples

KustoClusterAddLanguageExtensions

az kusto cluster add-language-extension --name "kustoclusterrptest4" --value language-extension-name="PYTHON" --value language-extension-name="R" --resource-group "kustorptest"

Optional Parameters

--cluster-name --name -n

The name of the Kusto cluster.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--value

The list of language extensions.

Usage: --value language-extension-name=XX

language-extension-name: The language extension name.

Multiple actions can be specified by using more than one --value argument.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster create

Deprecated

This command is implicitly deprecated because command group 'kusto cluster' is deprecated and will be removed in a future release. Use '"az extension add -n kusto" to install the supported Kusto extension' instead.

Create a Kusto cluster.

az kusto cluster create --name
                        --resource-group
                        --sku {Dev(No SLA)_Standard_D11_v2, Dev(No SLA)_Standard_E2a_v4, Standard_D11_v2, Standard_D12_v2, Standard_D13_v2, Standard_D14_v2, Standard_DS13_v2+1TB_PS, Standard_DS13_v2+2TB_PS, Standard_DS14_v2+3TB_PS, Standard_DS14_v2+4TB_PS, Standard_E16a_v4, Standard_E16as_v4+3TB_PS, Standard_E16as_v4+4TB_PS, Standard_E2a_v4, Standard_E4a_v4, Standard_E8a_v4, Standard_E8as_v4+1TB_PS, Standard_E8as_v4+2TB_PS, Standard_L16s, Standard_L4s, Standard_L8s}
                        [--capacity]
                        [--location]
                        [--no-wait]

Examples

Create a Kusto Cluster.

az kusto cluster create -l "Central US" -n myclustername -g myrgname --sku D13_v2 --capacity 10

Required Parameters

--name -n

The name of the cluster.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--sku

The name of the sku.

Accepted values: Dev(No SLA)_Standard_D11_v2, Dev(No SLA)_Standard_E2a_v4, Standard_D11_v2, Standard_D12_v2, Standard_D13_v2, Standard_D14_v2, Standard_DS13_v2+1TB_PS, Standard_DS13_v2+2TB_PS, Standard_DS14_v2+3TB_PS, Standard_DS14_v2+4TB_PS, Standard_E16a_v4, Standard_E16as_v4+3TB_PS, Standard_E16as_v4+4TB_PS, Standard_E2a_v4, Standard_E4a_v4, Standard_E8a_v4, Standard_E8as_v4+1TB_PS, Standard_E8as_v4+2TB_PS, Standard_L16s, Standard_L4s, Standard_L8s

Optional Parameters

--capacity

The instance number of the VM.

--location -l

Location. Values from: az account list-locations. You can configure the default location using az configure --defaults location=<location>.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster create (kusto extension)

Experimental

Command group 'kusto' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Create a Kusto cluster.

az kusto cluster create --cluster-name
                        --resource-group
                        --sku
                        [--accepted-audiences]
                        [--allowed-fqdn-list]
                        [--allowed-ip-range-list]
                        [--enable-auto-stop {false, true}]
                        [--enable-disk-encryption {false, true}]
                        [--enable-double-encryption {false, true}]
                        [--enable-purge {false, true}]
                        [--enable-streaming-ingest {false, true}]
                        [--engine-type {V2, V3}]
                        [--if-match]
                        [--if-none-match]
                        [--key-vault-properties]
                        [--location]
                        [--no-wait]
                        [--optimized-autoscale]
                        [--outbound-net-access {Disabled, Enabled}]
                        [--public-ip-type {DualStack, IPv4}]
                        [--public-network-access {Disabled, Enabled}]
                        [--tags]
                        [--trusted-external-tenants]
                        [--type {None, SystemAssigned, SystemAssigned, UserAssigned, UserAssigned}]
                        [--user-assigned]
                        [--vcluster-graduation]
                        [--virtual-network-configuration]
                        [--zones]

Examples

KustoClustersCreateOrUpdate

az kusto cluster create --name "kustoclusterrptest4" --type "SystemAssigned" --location "westus" --enable-double-encryption false --enable-purge true --enable-streaming-ingest true --sku name="Standard_L8s" capacity=2 tier="Standard" --resource-group "kustorptest"

Required Parameters

--cluster-name --name -n

The name of the Kusto cluster.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--sku

The SKU of the cluster.

Usage: --sku name=XX capacity=XX tier=XX

name: Required. SKU name. capacity: The number of instances of the cluster. tier: Required. SKU tier.

Optional Parameters

--accepted-audiences

The cluster's accepted audiences.

--allowed-fqdn-list

List of allowed FQDNs(Fully Qualified Domain Name) for egress from Cluster.

--allowed-ip-range-list

The list of ips in the format of CIDR allowed to connect to the cluster.

--enable-auto-stop

A boolean value that indicates if the cluster could be automatically stopped (due to lack of data or no activity for many days).

Accepted values: false, true
--enable-disk-encryption

A boolean value that indicates if the cluster's disks are encrypted.

Accepted values: false, true
--enable-double-encryption

A boolean value that indicates if double encryption is enabled.

Accepted values: false, true
--enable-purge

A boolean value that indicates if the purge operations are enabled.

Accepted values: false, true
--enable-streaming-ingest

A boolean value that indicates if the streaming ingest is enabled.

Accepted values: false, true
--engine-type

The engine type.

Accepted values: V2, V3
--if-match

The ETag of the cluster. Omit this value to always overwrite the current cluster. Specify the last-seen ETag value to prevent accidentally overwriting concurrent changes.

--if-none-match

Set to '*' to allow a new cluster to be created, but to prevent updating an existing cluster. Other values will result in a 412 Pre-condition Failed response.

--key-vault-properties

KeyVault properties for the cluster encryption.

Usage: --key-vault-properties key-name=XX key-version=XX key-vault-uri=XX user-identity=XX

key-name: Required. The name of the key vault key. key-version: The version of the key vault key. key-vault-uri: Required. The Uri of the key vault. user-identity: The user assigned identity (ARM resource id) that has access to the key.

--location -l

Location. Values from: az account list-locations. You can configure the default location using az configure --defaults location=<location>.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False
--optimized-autoscale

Optimized auto scale definition.

Usage: --optimized-autoscale version=XX is-enabled=XX minimum=XX maximum=XX

version: Required. The version of the template defined, for instance 1. is-enabled: Required. A boolean value that indicate if the optimized autoscale feature is enabled or not. minimum: Required. Minimum allowed instances count. maximum: Required. Maximum allowed instances count.

--outbound-net-access --restrict-outbound-network-access

Whether or not to restrict outbound network access. Value is optional but if passed in, must be 'Enabled' or 'Disabled'.

Accepted values: Disabled, Enabled
--public-ip-type

Indicates what public IP type to create - IPv4 (default), or DualStack (both IPv4 and IPv6).

Accepted values: DualStack, IPv4
--public-network-access

Public network access to the cluster is enabled by default. When disabled, only private endpoint connection to the cluster is allowed.

Accepted values: Disabled, Enabled
--tags

Space-separated tags: key[=value] [key[=value] ...]. Use "" to clear existing tags.

--trusted-external-tenants

The cluster's external tenants.

Usage: --trusted-external-tenants value=XX

value: GUID representing an external tenant.

Multiple actions can be specified by using more than one --trusted-external-tenants argument.

--type

The type of managed identity used. The type 'SystemAssigned, UserAssigned' includes both an implicitly created identity and a set of user-assigned identities. The type 'None' will remove all identities.

Accepted values: None, SystemAssigned, SystemAssigned, UserAssigned, UserAssigned
--user-assigned --user-assigned-identities

The list of user identities associated with the Kusto cluster. The user identity dictionary key references will be ARM resource ids in the form: '/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ManagedIdentity/userAssignedIdentities/{identityName}'. Expected value: json-string/json-file/@json-file.

--vcluster-graduation --virtual-cluster-graduation-properties

Virtual Cluster graduation properties.

--virtual-network-configuration

Virtual network definition.

Usage: --virtual-network-configuration subnet-id=XX engine-public-ip-id=XX data-management-public-ip-id=XX

subnet-id: Required. The subnet resource id. engine-public-ip-id: Required. Engine service's public IP address resource id. data-management-public-ip-id: Required. Data management's service public IP address resource id.

--zones

The availability zones of the cluster.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster delete

Deprecated

This command is implicitly deprecated because command group 'kusto cluster' is deprecated and will be removed in a future release. Use '"az extension add -n kusto" to install the supported Kusto extension' instead.

Delete a Kusto cluster.

az kusto cluster delete [--ids]
                        [--name]
                        [--resource-group]
                        [--subscription]
                        [--yes]

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

The name of the cluster.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--yes -y

Do not prompt for confirmation.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster delete (kusto extension)

Experimental

Command group 'kusto' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Deletes a Kusto cluster.

az kusto cluster delete [--cluster-name]
                        [--ids]
                        [--no-wait]
                        [--resource-group]
                        [--subscription]
                        [--yes]

Examples

KustoClustersDelete

az kusto cluster delete --name "kustoclusterrptest4" --resource-group "kustorptest"

Optional Parameters

--cluster-name --name -n

The name of the Kusto cluster.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--yes -y

Do not prompt for confirmation.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster detach-follower-database

Experimental

Command group 'kusto' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Detaches all followers of a database owned by this cluster.

az kusto cluster detach-follower-database --attached-database-configuration-name
                                          --cluster-resource-id
                                          [--cluster-name]
                                          [--ids]
                                          [--no-wait]
                                          [--resource-group]
                                          [--subscription]

Examples

KustoClusterDetachFollowerDatabases

az kusto cluster detach-follower-database --name "kustoclusterrptest4" --attached-database-configuration-name "myAttachedDatabaseConfiguration" --cluster-resource-id "/subscriptions/12345678-1234-1234-1234-123456789098/resourceGroups/kustorptest/providers/Microsoft.Kusto/clusters/leader4" --resource-group "kustorptest"

Required Parameters

--attached-database-configuration-name

Resource name of the attached database configuration in the follower cluster.

--cluster-resource-id

Resource id of the cluster that follows a database owned by this cluster.

Optional Parameters

--cluster-name --name -n

The name of the Kusto cluster.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster diagnose-virtual-network

Experimental

Command group 'kusto' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Diagnoses network connectivity status for external resources on which the service is dependent on.

az kusto cluster diagnose-virtual-network [--cluster-name]
                                          [--ids]
                                          [--no-wait]
                                          [--resource-group]
                                          [--subscription]

Examples

KustoClusterDiagnoseVirtualNetwork

az kusto cluster diagnose-virtual-network --name "kustoclusterrptest4" --resource-group "kustorptest"

Optional Parameters

--cluster-name --name -n

The name of the Kusto cluster.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster list

Deprecated

This command is implicitly deprecated because command group 'kusto cluster' is deprecated and will be removed in a future release. Use '"az extension add -n kusto" to install the supported Kusto extension' instead.

List a Kusto cluster.

az kusto cluster list --resource-group

Examples

List a Kusto cluster. (autogenerated)

az kusto cluster list --resource-group MyResourceGroup

Required Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster list (kusto extension)

Experimental

Command group 'kusto' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Lists all Kusto clusters within a resource group. And Lists all Kusto clusters within a subscription.

az kusto cluster list [--resource-group]

Examples

KustoClustersListByResourceGroup

az kusto cluster list --resource-group "kustorptest"

KustoClustersList

az kusto cluster list

Optional Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster list-follower-database

Experimental

Command group 'kusto' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Returns a list of databases that are owned by this cluster and were followed by another cluster.

az kusto cluster list-follower-database --cluster-name
                                        --resource-group

Examples

KustoClusterListFollowerDatabases

az kusto cluster list-follower-database --name "kustoclusterrptest4" --resource-group "kustorptest"

Required Parameters

--cluster-name --name -n

The name of the Kusto cluster.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster list-language-extension

Experimental

Command group 'kusto' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Returns a list of language extensions that can run within KQL queries.

az kusto cluster list-language-extension --cluster-name
                                         --resource-group

Examples

KustoClusterListLanguageExtensions

az kusto cluster list-language-extension --name "kustoclusterrptest4" --resource-group "kustorptest"

Required Parameters

--cluster-name --name -n

The name of the Kusto cluster.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster list-outbound-network-dependency-endpoint

Experimental

Command group 'kusto' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Gets the network endpoints of all outbound dependencies of a Kusto cluster.

az kusto cluster list-outbound-network-dependency-endpoint --cluster-name
                                                           --resource-group

Examples

Get Kusto cluster outbound network dependencies

az kusto cluster list-outbound-network-dependency-endpoint --name "kustoCluster" --resource-group "kustorptest"

Required Parameters

--cluster-name --name -n

The name of the Kusto cluster.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster list-sku

Experimental

Command group 'kusto' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Returns the SKUs available for the provided resource. And Lists eligible SKUs for Kusto resource provider.

az kusto cluster list-sku [--cluster-name]
                          [--resource-group]

Examples

KustoClustersListResourceSkus

az kusto cluster list-sku --name "kustoclusterrptest4" --resource-group "kustorptest"

KustoClustersListSkus

az kusto cluster list-sku

Optional Parameters

--cluster-name --name -n

The name of the Kusto cluster.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster remove-language-extension

Experimental

Command group 'kusto' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Remove a list of language extensions that can run within KQL queries.

az kusto cluster remove-language-extension [--cluster-name]
                                           [--ids]
                                           [--no-wait]
                                           [--resource-group]
                                           [--subscription]
                                           [--value]

Examples

KustoClusterRemoveLanguageExtensions

az kusto cluster remove-language-extension --name "kustoclusterrptest4" --value language-extension-name="PYTHON" --value language-extension-name="R" --resource-group "kustorptest"

Optional Parameters

--cluster-name --name -n

The name of the Kusto cluster.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--value

The list of language extensions.

Usage: --value language-extension-name=XX

language-extension-name: The language extension name.

Multiple actions can be specified by using more than one --value argument.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster show

Deprecated

This command is implicitly deprecated because command group 'kusto cluster' is deprecated and will be removed in a future release. Use '"az extension add -n kusto" to install the supported Kusto extension' instead.

Get a Kusto cluster.

az kusto cluster show [--ids]
                      [--name]
                      [--resource-group]
                      [--subscription]

Examples

Get a Kusto cluster. (autogenerated)

az kusto cluster show --name MyCluster --resource-group MyResourceGroup

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

The name of the cluster.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster show (kusto extension)

Experimental

Command group 'kusto' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Gets a Kusto cluster.

az kusto cluster show [--cluster-name]
                      [--ids]
                      [--resource-group]
                      [--subscription]

Examples

KustoClustersGet

az kusto cluster show --name "kustoclusterrptest4" --resource-group "kustorptest"

Optional Parameters

--cluster-name --name -n

The name of the Kusto cluster.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster start

Deprecated

This command is implicitly deprecated because command group 'kusto cluster' is deprecated and will be removed in a future release. Use '"az extension add -n kusto" to install the supported Kusto extension' instead.

Start a Kusto cluster.

When the cluster is restarted, it takes about ten minutes for it to become available (like when it was originally provisioned). It takes additional time for data to load into the hot cache.

az kusto cluster start [--ids]
                       [--name]
                       [--no-wait]
                       [--resource-group]
                       [--subscription]

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

The name of the cluster.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster start (kusto extension)

Experimental

Command group 'kusto' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Starts a Kusto cluster.

az kusto cluster start [--cluster-name]
                       [--ids]
                       [--no-wait]
                       [--resource-group]
                       [--subscription]

Examples

KustoClustersStart

az kusto cluster start --name "kustoclusterrptest4" --resource-group "kustorptest"

Optional Parameters

--cluster-name --name -n

The name of the Kusto cluster.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster stop

Deprecated

This command is implicitly deprecated because command group 'kusto cluster' is deprecated and will be removed in a future release. Use '"az extension add -n kusto" to install the supported Kusto extension' instead.

Stop a Kusto cluster.

When the cluster is stopped, data is not available for queries, and you can't ingest new data. Start cluster to enable queries.

az kusto cluster stop [--ids]
                      [--name]
                      [--no-wait]
                      [--resource-group]
                      [--subscription]

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

The name of the cluster.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster stop (kusto extension)

Experimental

Command group 'kusto' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Stops a Kusto cluster.

az kusto cluster stop [--cluster-name]
                      [--ids]
                      [--no-wait]
                      [--resource-group]
                      [--subscription]

Examples

KustoClustersStop

az kusto cluster stop --name "kustoclusterrptest4" --resource-group "kustorptest"

Optional Parameters

--cluster-name --name -n

The name of the Kusto cluster.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster update

Deprecated

This command is implicitly deprecated because command group 'kusto cluster' is deprecated and will be removed in a future release. Use '"az extension add -n kusto" to install the supported Kusto extension' instead.

Update a Kusto cluster.

az kusto cluster update [--add]
                        [--capacity]
                        [--force-string]
                        [--ids]
                        [--name]
                        [--remove]
                        [--resource-group]
                        [--set]
                        [--sku {Dev(No SLA)_Standard_D11_v2, Dev(No SLA)_Standard_E2a_v4, Standard_D11_v2, Standard_D12_v2, Standard_D13_v2, Standard_D14_v2, Standard_DS13_v2+1TB_PS, Standard_DS13_v2+2TB_PS, Standard_DS14_v2+3TB_PS, Standard_DS14_v2+4TB_PS, Standard_E16a_v4, Standard_E16as_v4+3TB_PS, Standard_E16as_v4+4TB_PS, Standard_E2a_v4, Standard_E4a_v4, Standard_E8a_v4, Standard_E8as_v4+1TB_PS, Standard_E8as_v4+2TB_PS, Standard_L16s, Standard_L4s, Standard_L8s}]
                        [--subscription]

Examples

update a Kusto Cluster.

az kusto cluster update -n myclustername -g myrgname --sku D14_v2 --capacity 4

Optional Parameters

--add

Add an object to a list of objects by specifying a path and key value pairs. Example: --add property.listProperty <key=value, string or JSON string>.

Default value: []
--capacity

The instance number of the VM.

--force-string

When using 'set' or 'add', preserve string literals instead of attempting to convert to JSON.

Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

The name of the cluster.

--remove

Remove a property or an element from a list. Example: --remove property.list <indexToRemove> OR --remove propertyToRemove.

Default value: []
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--set

Update an object by specifying a property path and value to set. Example: --set property1.property2=<value>.

Default value: []
--sku

The name of the sku.

Accepted values: Dev(No SLA)_Standard_D11_v2, Dev(No SLA)_Standard_E2a_v4, Standard_D11_v2, Standard_D12_v2, Standard_D13_v2, Standard_D14_v2, Standard_DS13_v2+1TB_PS, Standard_DS13_v2+2TB_PS, Standard_DS14_v2+3TB_PS, Standard_DS14_v2+4TB_PS, Standard_E16a_v4, Standard_E16as_v4+3TB_PS, Standard_E16as_v4+4TB_PS, Standard_E2a_v4, Standard_E4a_v4, Standard_E8a_v4, Standard_E8as_v4+1TB_PS, Standard_E8as_v4+2TB_PS, Standard_L16s, Standard_L4s, Standard_L8s
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster update (kusto extension)

Experimental

Command group 'kusto' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Update a Kusto cluster.

az kusto cluster update [--accepted-audiences]
                        [--allowed-fqdn-list]
                        [--allowed-ip-range-list]
                        [--cluster-name]
                        [--enable-auto-stop {false, true}]
                        [--enable-disk-encryption {false, true}]
                        [--enable-double-encryption {false, true}]
                        [--enable-purge {false, true}]
                        [--enable-streaming-ingest {false, true}]
                        [--engine-type {V2, V3}]
                        [--ids]
                        [--if-match]
                        [--key-vault-properties]
                        [--location]
                        [--no-wait]
                        [--optimized-autoscale]
                        [--outbound-net-access {Disabled, Enabled}]
                        [--public-ip-type {DualStack, IPv4}]
                        [--public-network-access {Disabled, Enabled}]
                        [--resource-group]
                        [--sku]
                        [--subscription]
                        [--tags]
                        [--trusted-external-tenants]
                        [--type {None, SystemAssigned, SystemAssigned, UserAssigned, UserAssigned}]
                        [--user-assigned]
                        [--vcluster-graduation]
                        [--virtual-network-configuration]

Examples

KustoClustersUpdate

az kusto cluster update --name "kustoclusterrptest4" --type "SystemAssigned" --location "westus" --enable-purge true --enable-streaming-ingest true --engine-type "V2" --key-vault-properties key-name="keyName" key-vault-uri="https://dummy.keyvault.com" key-version="keyVersion" --resource-group "kustorptest"

Optional Parameters

--accepted-audiences

The cluster's accepted audiences.

--allowed-fqdn-list

List of allowed FQDNs(Fully Qualified Domain Name) for egress from Cluster.

--allowed-ip-range-list

The list of ips in the format of CIDR allowed to connect to the cluster.

--cluster-name --name -n

The name of the Kusto cluster.

--enable-auto-stop

A boolean value that indicates if the cluster could be automatically stopped (due to lack of data or no activity for many days).

Accepted values: false, true
--enable-disk-encryption

A boolean value that indicates if the cluster's disks are encrypted.

Accepted values: false, true
--enable-double-encryption

A boolean value that indicates if double encryption is enabled.

Accepted values: false, true
--enable-purge

A boolean value that indicates if the purge operations are enabled.

Accepted values: false, true
--enable-streaming-ingest

A boolean value that indicates if the streaming ingest is enabled.

Accepted values: false, true
--engine-type

The engine type.

Accepted values: V2, V3
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--if-match

The ETag of the cluster. Omit this value to always overwrite the current cluster. Specify the last-seen ETag value to prevent accidentally overwriting concurrent changes.

--key-vault-properties

KeyVault properties for the cluster encryption.

Usage: --key-vault-properties key-name=XX key-version=XX key-vault-uri=XX user-identity=XX

key-name: Required. The name of the key vault key. key-version: The version of the key vault key. key-vault-uri: Required. The Uri of the key vault. user-identity: The user assigned identity (ARM resource id) that has access to the key.

--location -l

Location. Values from: az account list-locations. You can configure the default location using az configure --defaults location=<location>.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False
--optimized-autoscale

Optimized auto scale definition.

Usage: --optimized-autoscale version=XX is-enabled=XX minimum=XX maximum=XX

version: Required. The version of the template defined, for instance 1. is-enabled: Required. A boolean value that indicate if the optimized autoscale feature is enabled or not. minimum: Required. Minimum allowed instances count. maximum: Required. Maximum allowed instances count.

--outbound-net-access --restrict-outbound-network-access

Whether or not to restrict outbound network access. Value is optional but if passed in, must be 'Enabled' or 'Disabled'.

Accepted values: Disabled, Enabled
--public-ip-type

Indicates what public IP type to create - IPv4 (default), or DualStack (both IPv4 and IPv6).

Accepted values: DualStack, IPv4
--public-network-access

Public network access to the cluster is enabled by default. When disabled, only private endpoint connection to the cluster is allowed.

Accepted values: Disabled, Enabled
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--sku

The SKU of the cluster.

Usage: --sku name=XX capacity=XX tier=XX

name: Required. SKU name. capacity: The number of instances of the cluster. tier: Required. SKU tier.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--tags

Space-separated tags: key[=value] [key[=value] ...]. Use "" to clear existing tags.

--trusted-external-tenants

The cluster's external tenants.

Usage: --trusted-external-tenants value=XX

value: GUID representing an external tenant.

Multiple actions can be specified by using more than one --trusted-external-tenants argument.

--type

The type of managed identity used. The type 'SystemAssigned, UserAssigned' includes both an implicitly created identity and a set of user-assigned identities. The type 'None' will remove all identities.

Accepted values: None, SystemAssigned, SystemAssigned, UserAssigned, UserAssigned
--user-assigned --user-assigned-identities

The list of user identities associated with the Kusto cluster. The user identity dictionary key references will be ARM resource ids in the form: '/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ManagedIdentity/userAssignedIdentities/{identityName}'. Expected value: json-string/json-file/@json-file.

--vcluster-graduation --virtual-cluster-graduation-properties

Virtual Cluster graduation properties.

--virtual-network-configuration

Virtual network definition.

Usage: --virtual-network-configuration subnet-id=XX engine-public-ip-id=XX data-management-public-ip-id=XX

subnet-id: Required. The subnet resource id. engine-public-ip-id: Required. Engine service's public IP address resource id. data-management-public-ip-id: Required. Data management's service public IP address resource id.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster wait

Deprecated

This command is implicitly deprecated because command group 'kusto cluster' is deprecated and will be removed in a future release. Use '"az extension add -n kusto" to install the supported Kusto extension' instead.

Wait for a managed Kusto cluster to reach a desired state.

If an operation on a cluster was interrupted or was started with --no-wait, use this command to wait for it to complete.

az kusto cluster wait [--created]
                      [--custom]
                      [--deleted]
                      [--exists]
                      [--ids]
                      [--interval]
                      [--name]
                      [--resource-group]
                      [--subscription]
                      [--timeout]
                      [--updated]

Optional Parameters

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Default value: False
--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

--deleted

Wait until deleted.

Default value: False
--exists

Wait until the resource exists.

Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--interval

Polling interval in seconds.

Default value: 30
--name -n

The name of the cluster.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--timeout

Maximum wait in seconds.

Default value: 3600
--updated

Wait until updated with provisioningState at 'Succeeded'.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az kusto cluster wait (kusto extension)

Experimental

Command group 'kusto' is experimental and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Place the CLI in a waiting state until a condition of the kusto cluster is met.

az kusto cluster wait [--cluster-name]
                      [--created]
                      [--custom]
                      [--deleted]
                      [--exists]
                      [--ids]
                      [--interval]
                      [--resource-group]
                      [--subscription]
                      [--timeout]
                      [--updated]

Examples

Pause executing next line of CLI script until the kusto cluster is successfully created.

az kusto cluster wait --name "kustoclusterrptest4" --resource-group "kustorptest" --created

Pause executing next line of CLI script until the kusto cluster is successfully updated.

az kusto cluster wait --name "kustoclusterrptest4" --resource-group "kustorptest" --updated

Pause executing next line of CLI script until the kusto cluster is successfully deleted.

az kusto cluster wait --name "kustoclusterrptest4" --resource-group "kustorptest" --deleted

Optional Parameters

--cluster-name --name -n

The name of the Kusto cluster.

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Default value: False
--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

--deleted

Wait until deleted.

Default value: False
--exists

Wait until the resource exists.

Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--interval

Polling interval in seconds.

Default value: 30
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--timeout

Maximum wait in seconds.

Default value: 3600
--updated

Wait until updated with provisioningState at 'Succeeded'.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.