Upravit

Sdílet prostřednictvím


Policy CSP - Security

AllowAddProvisioningPackage

Scope Editions Applicable OS
✅ Device
❌ User
✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC
✅ Windows 10, version 1507 [10.0.10240] and later
./Device/Vendor/MSFT/Policy/Config/Security/AllowAddProvisioningPackage

Specifies whether to allow the runtime configuration agent to install provisioning packages.

Description framework properties:

Property name Property value
Format int
Access Type Add, Delete, Get, Replace
Default Value 1

Allowed values:

Value Description
0 Not allowed.
1 (Default) Allowed.

AllowManualRootCertificateInstallation

Note

This policy is deprecated and may be removed in a future release.

Scope Editions Applicable OS
✅ Device
❌ User
❌ Pro
❌ Enterprise
❌ Education
❌ Windows SE
❌ IoT Enterprise / IoT Enterprise LTSC
✅ Windows 10, version 1507 [10.0.10240] and later
./Device/Vendor/MSFT/Policy/Config/Security/AllowManualRootCertificateInstallation

This policy is deprecated.

Description framework properties:

Property name Property value
Format int
Access Type Add, Delete, Get, Replace
Default Value 1

Allowed values:

Value Description
0 Not allowed.
1 (Default) Allowed.

AllowRemoveProvisioningPackage

Scope Editions Applicable OS
✅ Device
❌ User
✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC
✅ Windows 10, version 1507 [10.0.10240] and later
./Device/Vendor/MSFT/Policy/Config/Security/AllowRemoveProvisioningPackage

Specifies whether to allow the runtime configuration agent to remove provisioning packages.

Description framework properties:

Property name Property value
Format int
Access Type Add, Delete, Get, Replace
Default Value 1

Allowed values:

Value Description
0 Not allowed.
1 (Default) Allowed.

AntiTheftMode

Note

This policy is deprecated and may be removed in a future release.

Scope Editions Applicable OS
✅ Device
❌ User
Not applicable ✅ Windows 10, version 1507 [10.0.10240] and later
./Device/Vendor/MSFT/Policy/Config/Security/AntiTheftMode

This policy is deprecated.

Description framework properties:

Property name Property value
Format int
Access Type Add, Delete, Get, Replace
Default Value 1

Allowed values:

Value Description
0 Disabled.
1 (Default) Enabled.

ClearTPMIfNotReady

Scope Editions Applicable OS
✅ Device
❌ User
✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC
✅ Windows 10, version 1709 [10.0.16299] and later
./Device/Vendor/MSFT/Policy/Config/Security/ClearTPMIfNotReady

This policy setting configures the system to prompt the user to clear the TPM if the TPM is detected to be in any state other than Ready. This policy will take effect only if the system's TPM is in a state other than Ready, including if the TPM is "Ready, with reduced functionality". The prompt to clear the TPM will start occurring after the next reboot, upon user login only if the logged in user is part of the Administrators group for the system. The prompt can be dismissed, but will reappear after every reboot and login until the policy is disabled or until the TPM is in a Ready state.

Description framework properties:

Property name Property value
Format int
Access Type Add, Delete, Get, Replace
Default Value 0

Allowed values:

Value Description
0 (Default) Will not force recovery from a non-ready TPM state.
1 Will prompt to clear the TPM if the TPM is in a non-ready state (or reduced functionality) which can be remediated with a TPM Clear.

Group policy mapping:

Name Value
Name ClearTPMIfNotReady_Name
Friendly Name Configure the system to clear the TPM if it is not in a ready state.
Location Computer Configuration
Path System > Trusted Platform Module Services
Registry Key Name Software\Policies\Microsoft\TPM
Registry Value Name ClearTPMIfNotReadyGP
ADMX File Name TPM.admx

ConfigureWindowsPasswords

Scope Editions Applicable OS
✅ Device
❌ User
✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC
✅ Windows 10, version 1803 [10.0.17134] and later
./Device/Vendor/MSFT/Policy/Config/Security/ConfigureWindowsPasswords

Configures the use of passwords for Windows features.

Note

This policy is only supported in Windows 10 S.

Description framework properties:

Property name Property value
Format int
Access Type Add, Delete, Get, Replace
Default Value 2

Allowed values:

Value Description
0 Disallow passwords (Asymmetric credentials will be promoted to replace passwords on Windows features).
1 Allow passwords (Passwords continue to be allowed to be used for Windows features).
2 (Default) As per SKU and device capabilities. Windows 10 S devices will exhibit "Disallow passwords" default, and all other devices will default to "Allow passwords").

PreventAutomaticDeviceEncryptionForAzureADJoinedDevices

Scope Editions Applicable OS
✅ Device
❌ User
✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC
✅ Windows 10, version 1607 [10.0.14393] and later
./Device/Vendor/MSFT/Policy/Config/Security/PreventAutomaticDeviceEncryptionForAzureADJoinedDevices

Specifies whether to allow automatic device encryption during OOBE when the device is Microsoft Entra joined.

For more information, see BitLocker Device Encryption

Description framework properties:

Property name Property value
Format int
Access Type Add, Delete, Get, Replace
Default Value 0

Allowed values:

Value Description
0 (Default) Encryption enabled.
1 Encryption disabled.

RecoveryEnvironmentAuthentication

Scope Editions Applicable OS
✅ Device
✅ User
✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC
✅ Windows 10, version 1809 [10.0.17763] and later
./User/Vendor/MSFT/Policy/Config/Security/RecoveryEnvironmentAuthentication
./Device/Vendor/MSFT/Policy/Config/Security/RecoveryEnvironmentAuthentication

This policy controls the requirement of Admin Authentication in RecoveryEnvironment.

Validation procedure:

To validate this policy, check whether Refresh ("Keep my files") and Reset ("Remove everything") require administrator authentication in Windows Recovery Environment (WinRE).

  1. First, start Push Button Reset (PBR) in WinRE. Open a command prompt as an administrator and run the following command: reagentc /boottore
  2. The device should restart to WinRE. In the WinRE interface, go to Troubleshoot and select Reset this PC. You should see two options: Keep my files and Remove everything.
  3. Choose the option to Keep my files. View the behavior for authentication.
  4. Select the back arrow and choose Remove everything. View the behavior for authentication.

Instead of going back, alternatively you can go through the reset options, and select Cancel on the final confirmation page. It will then return to the main WinRE interface.

The following table shows what behavior is expected for the policy settings with each scenario:

  • ✔️ It prompts for authentication.
  • ❌ No authentication required, and it continues with the reset options.
Policy Keep my files Remove everything
Default (0) ✔️
RequireAuthentication" (1) ✔️ ✔️
NoRequireAuthentication" (2)

Description framework properties:

Property name Property value
Format int
Access Type Add, Delete, Get, Replace
Default Value 0

Allowed values:

Value Description
0 (Default) Current) behavior.
1 RequireAuthentication: Admin Authentication is always required for components in RecoveryEnvironment.
2 NoRequireAuthentication: Admin Authentication isn't required for components in RecoveryEnvironment.

RequireDeviceEncryption

Scope Editions Applicable OS
✅ Device
❌ User
✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC
✅ Windows 10, version 1607 [10.0.14393] and later
./Device/Vendor/MSFT/Policy/Config/Security/RequireDeviceEncryption

Allows enterprise to turn on internal storage encryption. Most restricted value is 1. Important. If encryption has been enabled, it can't be turned off by using this policy.

Description framework properties:

Property name Property value
Format int
Access Type Add, Delete, Get, Replace
Default Value 0

Allowed values:

Value Description
0 (Default) Encryption isn't required.
1 Encryption is required.

RequireProvisioningPackageSignature

Scope Editions Applicable OS
✅ Device
❌ User
✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC
✅ Windows 10, version 1507 [10.0.10240] and later
./Device/Vendor/MSFT/Policy/Config/Security/RequireProvisioningPackageSignature

Specifies whether provisioning packages must have a certificate signed by a device trusted authority.

Description framework properties:

Property name Property value
Format int
Access Type Add, Delete, Get, Replace
Default Value 0

Allowed values:

Value Description
0 (Default) Not required.
1 Required.

RequireRetrieveHealthCertificateOnBoot

Scope Editions Applicable OS
✅ Device
❌ User
✅ Pro
✅ Enterprise
✅ Education
✅ Windows SE
✅ IoT Enterprise / IoT Enterprise LTSC
✅ Windows 10, version 1507 [10.0.10240] and later
./Device/Vendor/MSFT/Policy/Config/Security/RequireRetrieveHealthCertificateOnBoot

Specifies whether to retrieve and post TCG Boot logs, and get or cache an encrypted or signed Health Attestation Report from the Microsoft Health Attestation Service (HAS) when a device boots or reboots. Setting this policy to 1 (Required):Determines whether a device is capable of Remote Device Health Attestation, by verifying if the device has TPM 2. 0. Improves the performance of the device by enabling the device to fetch and cache data to reduce the latency during Device Health Verification.

Note

We recommend that this policy is set to Required after MDM enrollment. Most restricted value is 1.

Description framework properties:

Property name Property value
Format int
Access Type Add, Delete, Get, Replace
Default Value 0

Allowed values:

Value Description
0 (Default) Not required.
1 Required.

Policy configuration service provider