Freigeben über


ConfigurationManager.OpenExeConfiguration Methode

Definition

Öffnet die angegebene Clientkonfigurationsdatei als Configuration-Objekt.

Überlädt

OpenExeConfiguration(ConfigurationUserLevel)

Öffnet die Konfigurationsdatei für die aktuelle Anwendung als Configuration-Objekt.

OpenExeConfiguration(String)

Öffnet die angegebene Clientkonfigurationsdatei als Configuration-Objekt.

OpenExeConfiguration(ConfigurationUserLevel)

Quelle:
ConfigurationManager.cs
Quelle:
ConfigurationManager.cs
Quelle:
ConfigurationManager.cs

Öffnet die Konfigurationsdatei für die aktuelle Anwendung als Configuration-Objekt.

public:
 static System::Configuration::Configuration ^ OpenExeConfiguration(System::Configuration::ConfigurationUserLevel userLevel);
public static System.Configuration.Configuration OpenExeConfiguration (System.Configuration.ConfigurationUserLevel userLevel);
static member OpenExeConfiguration : System.Configuration.ConfigurationUserLevel -> System.Configuration.Configuration
Public Shared Function OpenExeConfiguration (userLevel As ConfigurationUserLevel) As Configuration

Parameter

userLevel
ConfigurationUserLevel

Einer der Enumerationswerte, der die Benutzerebene angibt, für die Sie die Konfiguration öffnen.

Gibt zurück

Die Konfigurationsdatei für die aktuelle Anwendung.

Ausnahmen

Eine Konfigurationsdatei konnte nicht geladen werden.

Beispiele

Im folgenden Codebeispiel wird die Verwendung der OpenExeConfiguration-Methode veranschaulicht.

// Get the roaming configuration file associated 
// with the application.
// This function uses the OpenExeConfiguration(
// ConfigurationUserLevel userLevel) method to 
// get the configuration file.
// It also creates a custom ConsoleSection and 
// sets its ConsoleElement BackgroundColor and
// ForegroundColor properties to blue and yellow
// respectively. Then it uses these properties to
// set the console colors.  
public static void GetRoamingConfiguration()
{
  // Define the custom section to add to the
  // configuration file.
  string sectionName = "consoleSection";
  ConsoleSection currentSection = null;
  
  // Get the roaming configuration 
  // that applies to the current user.
  Configuration roamingConfig =
    ConfigurationManager.OpenExeConfiguration(
     ConfigurationUserLevel.PerUserRoaming);

  // Map the roaming configuration file. This
  // enables the application to access 
  // the configuration file using the
  // System.Configuration.Configuration class
  ExeConfigurationFileMap configFileMap =
    new ExeConfigurationFileMap();
  configFileMap.ExeConfigFilename = 
    roamingConfig.FilePath;

  // Get the mapped configuration file.
  Configuration config =
    ConfigurationManager.OpenMappedExeConfiguration(
      configFileMap, ConfigurationUserLevel.None);
  
  try
    {
      currentSection =
           (ConsoleSection)config.GetSection(
             sectionName);

      // Synchronize the application configuration
      // if needed. The following two steps seem
      // to solve some out of synch issues 
      // between roaming and default
      // configuration.
      config.Save(ConfigurationSaveMode.Modified);

      // Force a reload of the changed section, 
      // if needed. This makes the new values available 
      // for reading.
      ConfigurationManager.RefreshSection(sectionName);

      if (currentSection == null)
      {
        // Create a custom configuration section.
        currentSection = new ConsoleSection();

        // Define where in the configuration file 
        // hierarchy the associated 
        // configuration section can be declared.
        // The following assignment assures that 
        // the configuration information can be 
        // defined in the user.config file in the 
        // roaming user directory. 
        currentSection.SectionInformation.AllowExeDefinition =
          ConfigurationAllowExeDefinition.MachineToLocalUser;

        // Allow the configuration section to be 
        // overridden by lower-level configuration files.
        // This means that lower-level files can contain
        // the section (use the same name) and assign 
        // different values to it as done by the
        // function GetApplicationConfiguration() in this
        // example.
        currentSection.SectionInformation.AllowOverride =
          true;

        // Store console settings for roaming users.
        currentSection.ConsoleElement.BackgroundColor =
            ConsoleColor.Blue;
        currentSection.ConsoleElement.ForegroundColor =
            ConsoleColor.Yellow;

        // Add configuration information to 
        // the configuration file.
        config.Sections.Add(sectionName, currentSection);
        config.Save(ConfigurationSaveMode.Modified);
        // Force a reload of the changed section. This 
        // makes the new values available for reading.
        ConfigurationManager.RefreshSection(
          sectionName);
      }
  }
  catch (ConfigurationErrorsException e)
  {
      Console.WriteLine("[Exception error: {0}]",
          e.ToString());
  }

  // Set console properties using values
  // stored in the configuration file.
  Console.BackgroundColor =
    currentSection.ConsoleElement.BackgroundColor;
  Console.ForegroundColor =
    currentSection.ConsoleElement.ForegroundColor;
  // Apply the changes.
  Console.Clear();

  // Display feedback.
  Console.WriteLine();
  Console.WriteLine(
    "Using OpenExeConfiguration(ConfigurationUserLevel).");
  Console.WriteLine(
      "Configuration file is: {0}", config.FilePath);
}
    ' Get the roaming configuration file associated 
    ' with the application.
    ' This function uses the OpenExeConfiguration(
    ' ConfigurationUserLevel userLevel) method to 
    ' get the configuration file.
    ' It also creates a custom ConsoleSection and 
' sets its ConsoleElement BackgroundColor and
    ' ForegroundColor properties to blue and yellow
    ' respectively. Then it uses these properties to
    ' set the console colors.  
    Public Shared Sub GetRoamingConfiguration()
        ' Define the custom section to add to the
        ' configuration file.
        Dim sectionName As String = "consoleSection"
        Dim currentSection As ConsoleSection = Nothing

        ' Get the roaming configuration 
        ' that applies to the current user.
        Dim roamingConfig As Configuration = _
        ConfigurationManager.OpenExeConfiguration( _
            ConfigurationUserLevel.PerUserRoaming)

        ' Map the roaming configuration file. This
        ' enables the application to access 
        ' the configuration file using the
        ' System.Configuration.Configuration class
        Dim configFileMap As New ExeConfigurationFileMap()
        configFileMap.ExeConfigFilename = _
            roamingConfig.FilePath

        ' Get the mapped configuration file.
        Dim config As Configuration = _
            ConfigurationManager.OpenMappedExeConfiguration( _
                configFileMap, ConfigurationUserLevel.None)

        Try
            currentSection = DirectCast( _
                config.GetSection(sectionName),  _
                ConsoleSection)

            ' Synchronize the application configuration
            ' if needed. The following two steps seem
            ' to solve some out of synch issues 
            ' between roaming and default
            ' configuration.
            config.Save(ConfigurationSaveMode.Modified)

            ' Force a reload of the changed section, 
            ' if needed. This makes the new values available 
            ' for reading.
            ConfigurationManager.RefreshSection(sectionName)

            If currentSection Is Nothing Then
                ' Create a custom configuration section.
                currentSection = New ConsoleSection()

                ' Define where in the configuration file 
                ' hierarchy the associated 
                ' configuration section can be declared.
                ' The following assignment assures that 
                ' the configuration information can be 
                ' defined in the user.config file in the 
                ' roaming user directory. 
                currentSection.SectionInformation. _
                AllowExeDefinition = _
                    ConfigurationAllowExeDefinition. _
                    MachineToLocalUser

                ' Allow the configuration section to be 
                ' overridden by lower-level configuration 
                ' files.
                ' This means that lower-level files can 
                ' contain()the section (use the same name) 
                ' and assign different values to it as 
                ' done by the function 
                ' GetApplicationConfiguration() in this
                ' example.
                currentSection.SectionInformation. _
                    AllowOverride = True

                ' Store console settings for roaming users.
                currentSection.ConsoleElement. _
                BackgroundColor = ConsoleColor.Blue
                currentSection.ConsoleElement. _
                ForegroundColor = ConsoleColor.Yellow

                ' Add configuration information to 
                ' the configuration file.
                config.Sections.Add(sectionName, _
                    currentSection)
                config.Save(ConfigurationSaveMode.Modified)
                ' Force a reload of the changed section. This 
                ' makes the new values available for reading.
                ConfigurationManager.RefreshSection( _
                    sectionName)
            End If
        Catch e As ConfigurationErrorsException
            Console.WriteLine("[Exception error: {0}]", _
                              e.ToString())
        End Try

        ' Set console properties using values
        ' stored in the configuration file.
        Console.BackgroundColor = _
            currentSection.ConsoleElement.BackgroundColor
        Console.ForegroundColor = _
            currentSection.ConsoleElement.ForegroundColor
        ' Apply the changes.
        Console.Clear()

        ' Display feedback.
        Console.WriteLine()
        Console.WriteLine( _
            "Using OpenExeConfiguration(userLevel).")
        Console.WriteLine( _
            "Configuration file is: {0}", config.FilePath)
    End Sub

Hinweise

Clientanwendungen verwenden eine globale Konfiguration, die für alle Benutzer gilt, separate Konfigurationen, die für einzelne Benutzer gelten, und Konfigurationen, die für Roamingbenutzer gelten. Der userLevel Parameter bestimmt den Speicherort der geöffneten Konfigurationsdatei, indem er angibt, ob sie keine Benutzerebene hat (die Konfigurationsdatei befindet sich im selben Verzeichnis wie die Anwendung) oder eine Benutzerebene (die Konfigurationsdatei befindet sich in einem von der Benutzerebene bestimmten Anwendungseinstellungspfad).

Geben Sie an, welche Konfiguration abgerufen werden soll, indem Sie einen der folgenden Werte für userLevelübergeben:

  • Um das Configuration Objekt abzurufen, das für alle Benutzer gilt, legen Sie auf NonefestuserLevel.

  • Um das lokale Configuration Objekt abzurufen, das für den aktuellen Benutzer gilt, legen Sie auf PerUserRoamingAndLocalfestuserLevel.

  • Um das Roamingobjekt Configuration abzurufen, das für den aktuellen Benutzer gilt, legen Sie auf PerUserRoamingfestuserLevel.

    Hinweis

    Um das Configuration Objekt für eine Ressource abzurufen, muss Ihr Code über Leseberechtigungen für alle Konfigurationsdateien verfügen, von denen er Einstellungen erbt. Um eine Konfigurationsdatei zu aktualisieren, muss Ihr Code zusätzlich über Schreibberechtigungen für die Konfigurationsdatei und das Verzeichnis verfügen, in dem er sich befindet.

Weitere Informationen

Gilt für:

OpenExeConfiguration(String)

Quelle:
ConfigurationManager.cs
Quelle:
ConfigurationManager.cs
Quelle:
ConfigurationManager.cs

Öffnet die angegebene Clientkonfigurationsdatei als Configuration-Objekt.

public:
 static System::Configuration::Configuration ^ OpenExeConfiguration(System::String ^ exePath);
public static System.Configuration.Configuration OpenExeConfiguration (string exePath);
static member OpenExeConfiguration : string -> System.Configuration.Configuration
Public Shared Function OpenExeConfiguration (exePath As String) As Configuration

Parameter

exePath
String

Der Pfad der ausführbaren Datei (EXE).

Gibt zurück

Die angegebene Konfigurationsdatei.

Ausnahmen

Eine Konfigurationsdatei konnte nicht geladen werden.

Beispiele

Im folgenden Codebeispiel wird die Verwendung der OpenExeConfiguration-Methode veranschaulicht.

    // Get the application configuration file.
    // This function uses the 
    // OpenExeConfiguration(string)method 
    // to get the application configuration file. 
    // It also creates a custom ConsoleSection and 
    // sets its ConsoleElement BackgroundColor and
    // ForegroundColor properties to black and white
    // respectively. Then it uses these properties to
    // set the console colors.  
    public static void GetAppConfiguration()
    {

      // Get the application path needed to obtain
      // the application configuration file.
#if DEBUG
      string applicationName =
          Environment.GetCommandLineArgs()[0];
#else
           string applicationName =
          Environment.GetCommandLineArgs()[0]+ ".exe";
#endif

      string exePath = System.IO.Path.Combine(
          Environment.CurrentDirectory, applicationName);

      // Get the configuration file. The file name has
      // this format appname.exe.config.
      System.Configuration.Configuration config =
        ConfigurationManager.OpenExeConfiguration(exePath);

      try
      {
        
        // Create a custom configuration section
        // having the same name that is used in the 
        // roaming configuration file.
        // This is because the configuration section 
        // can be overridden by lower-level 
        // configuration files. 
        // See the GetRoamingConfiguration() function in 
        // this example.
        string sectionName = "consoleSection";
        ConsoleSection customSection = new ConsoleSection();

        if (config.Sections[sectionName] == null)
        {
          // Create a custom section if it does 
          // not exist yet.
          
          // Store console settings.
          customSection.ConsoleElement.BackgroundColor =
              ConsoleColor.Black;
          customSection.ConsoleElement.ForegroundColor =
              ConsoleColor.White;

          // Add configuration information to the
          // configuration file.
          config.Sections.Add(sectionName, customSection);
          config.Save(ConfigurationSaveMode.Modified);
          // Force a reload of the changed section.
          // This makes the new values available for reading.
          ConfigurationManager.RefreshSection(sectionName);
        }
        // Set console properties using values
        // stored in the configuration file.
        customSection =
            (ConsoleSection)config.GetSection(sectionName);
        Console.BackgroundColor =
            customSection.ConsoleElement.BackgroundColor;
        Console.ForegroundColor =
            customSection.ConsoleElement.ForegroundColor;
        // Apply the changes.
        Console.Clear();
      }
      catch (ConfigurationErrorsException e)
      {
        Console.WriteLine("[Error exception: {0}]",
            e.ToString());
      }
     
      // Display feedback.
      Console.WriteLine();
      Console.WriteLine("Using OpenExeConfiguration(string).");
      // Display the current configuration file path.
      Console.WriteLine("Configuration file is: {0}", 
        config.FilePath);
    }
    ' Get the application configuration file.
    ' This function uses the 
    ' OpenExeConfiguration(string)method 
    ' to get the application configuration file. 
    ' It also creates a custom ConsoleSection and 
    ' sets its ConsoleElement BackgroundColor and
    ' ForegroundColor properties to black and white
    ' respectively. Then it uses these properties to
    ' set the console colors.  
    Public Shared Sub GetAppConfiguration()
        ' Get the application path needed to obtain
        ' the application configuration file.
#If DEBUG Then
        Dim applicationName As String = _
            Environment.GetCommandLineArgs()(0)
#Else
            Dim applicationName As String = _
                Environment.GetCommandLineArgs()(0) + ".exe"
#End If

        Dim exePath As String = _
        System.IO.Path.Combine( _
            Environment.CurrentDirectory, applicationName)

        ' Get the configuration file. The file name has
        ' this format appname.exe.config.
        Dim config As System.Configuration.Configuration = _
            ConfigurationManager.OpenExeConfiguration(exePath)

        Try

            ' Create a custom configuration section
            ' having the same name that is used in the 
            ' roaming configuration file.
            ' This is because the configuration section 
            ' can be overridden by lower-level 
            ' configuration files. 
            ' See the GetRoamingConfiguration() function in 
            ' this example.
            Dim sectionName As String = "consoleSection"
            Dim customSection As New ConsoleSection()

            If config.Sections(sectionName) Is Nothing Then
                ' Create a custom section if it does 
                ' not exist yet.

                ' Store console settings.
                customSection.ConsoleElement. _
                    BackgroundColor = ConsoleColor.Black
                customSection.ConsoleElement. _
                    ForegroundColor = ConsoleColor.White

                ' Add configuration information to the
                ' configuration file.
                config.Sections.Add(sectionName, _
                                    customSection)
                config.Save(ConfigurationSaveMode.Modified)
                ' Force a reload of the changed section.
                ' This makes the new values available 
                ' for reading.
                ConfigurationManager.RefreshSection( _
                    sectionName)
            End If
            ' Set console properties using values
            ' stored in the configuration file.
            customSection = DirectCast( _
                config.GetSection(sectionName),  _
                    ConsoleSection)
            Console.BackgroundColor = _
                customSection.ConsoleElement.BackgroundColor
            Console.ForegroundColor = _
                customSection.ConsoleElement.ForegroundColor
            ' Apply the changes.
            Console.Clear()
        Catch e As ConfigurationErrorsException
            Console.WriteLine("[Error exception: {0}]", _
                              e.ToString())
        End Try

        ' Display feedback.
        Console.WriteLine()
        Console.WriteLine( _
            "Using OpenExeConfiguration(string).")
        ' Display the current configuration file path.
        Console.WriteLine( _
            "Configuration file is: {0}", config.FilePath)
    End Sub

Hinweise

Das Aufrufen dieser Methodenüberladung entspricht dem Aufrufen der OpenMappedExeConfiguration(ExeConfigurationFileMap, ConfigurationUserLevel, Boolean) Überladung, bei der der preLoad Parameter auf falsefestgelegt ist.

Weitere Informationen

Gilt für: