Tutorial: Add an on-premises application for remote access through Application Proxy in Azure Active Directory
Azure Active Directory (Azure AD) has an Application Proxy service that enables users to access on-premises applications by signing in with their Azure AD account. To learn more about Application Proxy, see What is App Proxy?. This tutorial prepares your environment for use with Application Proxy. Once your environment is ready, you'll use the Azure portal to add an on-premises application to your Azure AD tenant.
Before you get started, make sure you are familiar with app management and Single Sign-On (SSO) concepts. Check out the following links:
Connectors are a key part of Application Proxy. To learn more about connectors, see Understand Azure AD Application Proxy connectors.
- Opens ports for outbound traffic and allows access to specific URLs
- Installs the connector on your Windows server, and registers it with Application Proxy
- Verifies the connector installed and registered correctly
- Adds an on-premises application to your Azure AD tenant
- Verifies a test user can sign on to the application by using an Azure AD account
To add an on-premises application to Azure AD, you need:
- A Microsoft Azure AD premium subscription
- An application administrator account
- User identities must be synchronized from an on-premises directory or created directly within your Azure AD tenants. Identity synchronization allows Azure AD to pre-authenticate users before granting them access to App Proxy published applications and to have the necessary user identifier information to perform single sign-on (SSO).
To use Application Proxy, you need a Windows server running Windows Server 2012 R2 or later. You'll install the Application Proxy connector on the server. This connector server needs to connect to the Application Proxy services in Azure, and the on-premises applications that you plan to publish.
For high availability in your production environment, we recommend having more than one Windows server. For this tutorial, one Windows server is sufficient.
If you are installing the connector on Windows Server 2019, you must disable HTTP2 protocol support in the WinHttp component for Kerberos Constrained Delegation to properly work. This is disabled by default in earlier versions of supported operating systems. Adding the following registry key and restarting the server disables it on Windows Server 2019. Note that this is a machine-wide registry key.
Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\WinHttp] "EnableDefaultHTTP2"=dword:00000000
The key can be set via PowerShell with the following command:
Set-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\WinHttp\' -Name EnableDefaultHTTP2 -Value 0
Recommendations for the connector server
- Physically locate the connector server close to the application servers to optimize performance between the connector and the application. For more information, see Optimize traffic flow with Azure Active Directory Application Proxy.
- The connector server and the web applications servers should belong to the same Active Directory domain or span trusting domains. Having the servers in the same domain or trusting domains is a requirement for using single sign-on (SSO) with integrated Windows authentication (IWA) and Kerberos Constrained Delegation (KCD). If the connector server and web application servers are in different Active Directory domains, you need to use resource-based delegation for single sign-on. For more information, see KCD for single sign-on with Application Proxy.
If you've deployed Azure AD Password Protection Proxy, do not install Azure AD Application Proxy and Azure AD Password Protection Proxy together on the same machine. Azure AD Application Proxy and Azure AD Password Protection Proxy install different versions of the Azure AD Connect Agent Updater service. These different versions are incompatible when installed together on the same machine.
The Windows connector server needs to have TLS 1.2 enabled before you install the Application Proxy connector.
To enable TLS 1.2:
Set the following registry keys:
Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2] [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client] "DisabledByDefault"=dword:00000000 "Enabled"=dword:00000001 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Server] "DisabledByDefault"=dword:00000000 "Enabled"=dword:00000001 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\v4.0.30319] "SchUseStrongCrypto"=dword:00000001
Restart the server.
Microsoft is updating Azure services to use TLS certificates from a different set of Root Certificate Authorities (CAs). This change is being made because the current CA certificates do not comply with one of the CA/Browser Forum Baseline requirements. See Azure TLS certificate changes for more information.
Prepare your on-premises environment
Start by enabling communication to Azure data centers to prepare your environment for Azure AD Application Proxy. If there's a firewall in the path, make sure it's open. An open firewall allows the connector to make HTTPS (TCP) requests to the Application Proxy.
If you are installing the connector for Azure Government cloud follow the prerequisites and installation steps. This requires enabling access to a different set of URLs and an additional parameter to run the installation.
Open the following ports to outbound traffic.
|Port number||How it's used|
|80||Downloading certificate revocation lists (CRLs) while validating the TLS/SSL certificate|
|443||All outbound communication with the Application Proxy service|
If your firewall enforces traffic according to originating users, also open ports 80 and 443 for traffic from Windows services that run as a Network Service.
Allow access to URLs
Allow access to the following URLs:
|URL||Port||How it's used|
||443/HTTPS||Communication between the connector and the Application Proxy cloud service|
||80/HTTP||The connector uses these URLs to verify certificates.|
||443/HTTPS||The connector uses these URLs during the registration process.|
||80/HTTP||The connector uses this URL during the registration process.|
You can allow connections to
*.servicebus.windows.net, and other URLs above if your firewall or proxy lets you configure access rules based on domain suffixes. If not, you need to allow access to the Azure IP ranges and Service Tags - Public Cloud. The IP ranges are updated each week.
Avoid all forms of inline inspection and termination on outbound TLS communications between Azure AD Application Proxy connectors and Azure AD Application Proxy Cloud services.
DNS name resolution for Azure AD Application Proxy endpoints
Public DNS records for Azure AD Application Proxy endpoints are chained CNAME records pointing to an A record. This ensures fault tolerance and flexibility. It’s guaranteed that the Azure AD Application Proxy Connector always accesses host names with the domain suffixes
*.servicebus.windows.net. However, during the name resolution the CNAME records might contain DNS records with different host names and suffixes. Due to this, you must ensure that the device (depending on your setup - connector server, firewall, outbound proxy) can resolve all the records in the chain and allows connection to the resolved IP addresses. Since the DNS records in the chain might be changed from time to time, we cannot provide you with any list DNS records.
Install and register a connector
To use Application Proxy, install a connector on each Windows server you're using with the Application Proxy service. The connector is an agent that manages the outbound connection from the on-premises application servers to Application Proxy in Azure AD. You can install a connector on servers that also have other authentication agents installed such as Azure AD Connect.
To install the connector:
Sign in to the Azure portal as an application administrator of the directory that uses Application Proxy. For example, if the tenant domain is
contoso.com, the admin should be
firstname.lastname@example.org any other admin alias on that domain.
Select your username in the upper-right corner. Verify you're signed in to a directory that uses Application Proxy. If you need to change directories, select Switch directory and choose a directory that uses Application Proxy.
In left navigation panel, select Azure Active Directory.
Under Manage, select Application proxy.
Select Download connector service.
Read the Terms of Service. When you're ready, select Accept terms & Download.
At the bottom of the window, select Run to install the connector. An install wizard opens.
Follow the instructions in the wizard to install the service. When you're prompted to register the connector with the Application Proxy for your Azure AD tenant, provide your application administrator credentials.
- For Internet Explorer (IE), if IE Enhanced Security Configuration is set to On, you may not see the registration screen. To get access, follow the instructions in the error message. Make sure that Internet Explorer Enhanced Security Configuration is set to Off.
If you've previously installed a connector, reinstall to get the latest version. To see information about previously released versions and what changes they include, see Application Proxy: Version Release History.
If you choose to have more than one Windows server for your on-premises applications, you'll need to install and register the connector on each server. You can organize the connectors into connector groups. For more information, see Connector groups.
If you have installed connectors in different regions, you can optimize traffic by selecting the closest Application Proxy cloud service region to use with each connector group, see Optimize traffic flow with Azure Active Directory Application Proxy
If your organization uses proxy servers to connect to the internet, you need to configure them for Application Proxy. For more information, see Work with existing on-premises proxy servers.
For information about connectors, capacity planning, and how they stay up-to-date, see Understand Azure AD Application Proxy connectors.
Verify the connector installed and registered correctly
You can use the Azure portal or your Windows server to confirm that a new connector installed correctly.
Verify the installation through Azure portal
To confirm the connector installed and registered correctly:
Sign in to your tenant directory in the Azure portal.
In the left navigation panel, select Azure Active Directory, and then select Application Proxy under the Manage section. All of your connectors and connector groups appear on this page.
View a connector to verify its details. The connectors should be expanded by default. If the connector you want to view isn't expanded, expand the connector to view the details. An active green label indicates that your connector can connect to the service. However, even though the label is green, a network issue could still block the connector from receiving messages.
For more help with installing a connector, see Problem installing the Application Proxy Connector.
Verify the installation through your Windows server
To confirm the connector installed and registered correctly:
Open the Windows Services Manager by clicking the Windows key and entering services.msc.
Check to see if the status for the following two services is Running.
Microsoft AAD Application Proxy Connector enables connectivity.
Microsoft AAD Application Proxy Connector Updater is an automated update service. The updater checks for new versions of the connector and updates the connector as needed.
If the status for the services isn't Running, right-click to select each service and choose Start.
Add an on-premises app to Azure AD
Now that you've prepared your environment and installed a connector, you're ready to add on-premises applications to Azure AD.
Sign in as an administrator in the Azure portal.
In the left navigation panel, select Azure Active Directory.
Select Enterprise applications, and then select New application.
Select Add an on-premises application button which appears about halfway down the page in the On-premises applications section. Alternatively, you can select Create your own application at the top of the page and then select Configure Application Proxy for secure remote access to an on-premise application.
In the Add your own on-premises application section, provide the following information about your application:
Field Description Name The name of the application that will appear on My Apps and in the Azure portal. Internal URL The URL for accessing the application from inside your private network. You can provide a specific path on the backend server to publish, while the rest of the server is unpublished. In this way, you can publish different sites on the same server as different apps, and give each one its own name and access rules.
If you publish a path, make sure that it includes all the necessary images, scripts, and style sheets for your application. For example, if your app is at
https://yourapp/appand uses images located at
https://yourapp/media, then you should publish
https://yourapp/as the path. This internal URL doesn't have to be the landing page your users see. For more information, see Set a custom home page for published apps.
External URL The address for users to access the app from outside your network. If you don't want to use the default Application Proxy domain, read about custom domains in Azure AD Application Proxy. Pre Authentication How Application Proxy verifies users before giving them access to your application.
Azure Active Directory - Application Proxy redirects users to sign in with Azure AD, which authenticates their permissions for the directory and application. We recommend keeping this option as the default so that you can take advantage of Azure AD security features like Conditional Access and Multi-Factor Authentication. Azure Active Directory is required for monitoring the application with Microsoft Cloud Application Security.
Passthrough - Users don't have to authenticate against Azure AD to access the application. You can still set up authentication requirements on the backend.
Connector Group Connectors process the remote access to your application, and connector groups help you organize connectors and apps by region, network, or purpose. If you don't have any connector groups created yet, your app is assigned to Default.
If your application uses WebSockets to connect, all connectors in the group must be version 1.5.612.0 or later.
If necessary, configure Additional settings. For most applications, you should keep these settings in their default states.
Field Description Backend Application Timeout Set this value to Long only if your application is slow to authenticate and connect. At default, the backend application timeout has a length of 85 seconds. When set to long, the backend timeout is increased to 180 seconds. Use HTTP-Only Cookie Set this value to Yes to have Application Proxy cookies include the HTTPOnly flag in the HTTP response header. If using Remote Desktop Services, set this value to No. Use Secure Cookie Set this value to Yes to transmit cookies over a secure channel such as an encrypted HTTPS request. Use Persistent Cookie Keep this value set to No. Only use this setting for applications that can't share cookies between processes. For more information about cookie settings, see Cookie settings for accessing on-premises applications in Azure Active Directory. Translate URLs in Headers Keep this value as Yes unless your application required the original host header in the authentication request. Translate URLs in Application Body Keep this value as No unless you have hardcoded HTML links to other on-premises applications and don't use custom domains. For more information, see Link translation with Application Proxy.
Set this value to Yes if you plan to monitor this application with Microsoft Defender for Cloud Apps. For more information, see Configure real-time application access monitoring with Microsoft Defender for Cloud Apps and Azure Active Directory.
Test the application
You're ready to test the application is added correctly. In the following steps, you'll add a user account to the application, and try signing in.
Add a user for testing
Before adding a user to the application, verify the user account already has permissions to access the application from inside the corporate network.
To add a test user:
- Select Enterprise applications, and then select the application you want to test.
- Select Getting started, and then select Assign a user for testing.
- Under Users and groups, select Add user.
- Under Add assignment, select Users and groups. The User and groups section appears.
- Choose the account you want to add.
- Choose Select, and then select Assign.
Test the sign-on
To test the sign-on to the application:
- From the application you want to test, select Application Proxy.
- At the top of the page, select Test Application to run a test on the application and check for any configuration issues.
- Make sure to first launch the application to test signing into the application, then download the diagnostic report to review the resolution guidance for any detected issues.
For troubleshooting, see Troubleshoot Application Proxy problems and error messages.
Clean up resources
When no longer needed, delete the resources you created in this tutorial.
In this tutorial, you prepared your on-premises environment to work with Application Proxy, and then installed and registered the Application Proxy connector. Next, you added an application to your Azure AD tenant. You verified that a user can sign on to the application by using an Azure AD account.
You did these things:
- Opened ports for outbound traffic and allowed access to specific URLs
- Installed the connector on your Windows server, and registered it with Application Proxy
- Verified the connector installed and registered correctly
- Added an on-premises application to your Azure AD tenant
- Verified a test user can sign on to the application by using an Azure AD account
You're ready to configure the application for single sign-on. Use the following link to choose a single sign-on method and to find single sign-on tutorials.