Scale agentless migration of VMware virtual machines to Azure

This article helps you understand how to use a scale-out appliance to migrate a large number of VMware virtual machines (VMs) to Azure using the Azure Migrate Server Migration tool's agentless method for migration of VMware VMs.

Using the agentless migration method for VMware virtual machines you can:

  • Replicate up to 300 VMs from a single vCenter server concurrently using one Azure Migrate appliance.
  • Replicate up to 500 VMs from a single vCenter server concurrently by deploying a second scale-out appliance for migration.

In this article, you will learn how to:

  • Add a scale-out appliance for agentless migration of VMware virtual machines
  • Migrate up to 500 VMs concurrently using the scale-out appliance.

Prerequisites

Before you get started, you need to perform the following steps:

  • Create the Azure Migrate project.
  • Deploy the Azure Migrate appliance (primary appliance) and complete discovery of VMware virtual machines managed by your vCenter server.
  • Configure replication for one or more virtual machines that are to be migrated.

Important

You'll need to have at least one replicating virtual machine in the project before you can add a scale-out appliance for migration.

To learn how to perform the above, review the tutorial on migrating VMware virtual machines to Azure with the agentless migration method.

Deploy a scale-out appliance

To add a scale-out appliance, follow the steps mentioned below:

  1. Click on Discover > Are your machines virtualized?
  2. Select Yes, with VMware vSphere Hypervisor.
  3. Select agentless replication in the next step.
  4. Select Scale-out an existing primary appliance in the select the type of appliance menu.
  5. Select the primary appliance (the appliance using which discovery was performed) that you wish to scale-out.

Discover machines page for scale-out onboarding

1. Generate the Azure Migrate project key

  1. In Generate Azure Migrate project key, provide a suffix name for the scale-out appliance. The suffix can contain only alphanumeric characters and has a length limit of 14 characters.
  2. Click Generate key to start the creation of the required Azure resources. Do not close the Discover page during the creation of resources.
  3. Copy the generated key. You will need the key later to complete the registration of the scale-out appliance.

2. Download the installer for the scale-out appliance

In Download Azure Migrate appliance, click Download. You need to download the PowerShell installer script to deploy the scale-out appliance on an existing server running Windows Server 2016 and with the required hardware configuration (32-GB RAM, 8 vCPUs, around 80 GB of disk storage and internet access, either directly or through a proxy).

Download script for scale-out appliance

Tip

You can validate the checksum of the downloaded zip file using these steps:

  1. On the server to which you downloaded the file, open an administrator command window.
  2. Run the following command to generate the hash for the zipped file: - C:\>CertUtil -HashFile <file_location> [Hashing Algorithm] - Example usage: C:\>CertUtil -HashFile C:\Users\administrator\Desktop\AzureMigrateInstaller.zip SHA256
  3. Download the latest version of the scale-out appliance installer from the portal if the computed hash value doesn't match this string: CA8CEEE4C7AC13328ECA56AE9EB35137336CD3D73B1F867C4D736286EF61A234

3. Run the Azure Migrate installer script

  1. Extract the zipped file to a folder on the server that will host the appliance. Make sure you don't run the script on a server with an existing Azure Migrate appliance.

  2. Launch PowerShell on the above server with administrative (elevated) privilege.

  3. Change the PowerShell directory to the folder where the contents have been extracted from the downloaded zipped file.

  4. Run the script named AzureMigrateInstaller.ps1 by running the following command:

    PS C:\Users\administrator\Desktop\AzureMigrateInstaller> .\AzureMigrateInstaller.ps1

  5. Select from the scenario, cloud, configuration and connectivity options to deploy the desired appliance. For instance, the selection shown below sets up a scale-out appliance to initiate concurrent replications on servers running in your VMware environment to an Azure Migrate project with default (public endpoint) connectivity on Azure public cloud.

    Screenshot that shows how to set up scale-out appliance.

  6. The installer script does the following:

    • Installs gateway agent and appliance configuration manager to perform more concurrent server replications.
    • Install Windows roles, including Windows Activation Service, IIS, and PowerShell ISE.
    • Download and installs an IIS rewritable module.
    • Updates a registry key (HKLM) with persistent setting details for Azure Migrate.
    • Creates the following files under the path:
      • Config Files: %Programdata%\Microsoft Azure\Config
      • Log Files: %Programdata%\Microsoft Azure\Logs

After the script has executed successfully, the appliance configuration manager will be launched automatically.

Note

If you come across any issues, you can access the script logs at C:\ProgramData\Microsoft Azure\Logs\AzureMigrateScenarioInstaller_Timestamp.log for troubleshooting.

4. Configure the appliance

Before you begin ensure that the these Azure endpoints are accessible from the scale-out appliance.

  • Open a browser on any machine that can connect to the scale-out appliance server, and open the URL of the appliance configuration manager: https://scale-out appliance name or IP address: 44368.

    Alternately, you can open the configuration manager from the scale-out appliance server's desktop using the shortcut to the configuration manager.

  • Accept the license terms, and read the third-party information.

  • In the configuration manager > Set up prerequisites, do the following:

    • Connectivity: The appliance checks that the server has internet access. If the server uses a proxy:
      1. Click on Setup proxy to specify the proxy address (in the form http://ProxyIPAddress or http://ProxyFQDN) and listening port.
      2. Specify credentials if the proxy needs authentication.
      3. Only HTTP proxy is supported.
      4. If you have added proxy details or disabled the proxy and/or authentication, click on Save to trigger connectivity check again.
    • Time sync: The time on the appliance should be in sync with internet time for discovery to work properly.
    • Install updates: The appliance ensures that the latest updates are installed. After the check completes, you can click on View appliance services to see the status and versions of the services running on the appliance server.
    • Install VDDK: The appliance checks that VMware vSphere Virtual Disk Development Kit (VDDK) is installed. If it isn't installed, download VDDK 6.7 from VMware, and extract the downloaded zip contents to the specified location on the appliance, as provided in the Installation instructions on the Appliance Configuration Manager screen.

Register the appliance with Azure Migrate

  1. Paste the Azure Migrate project key copied from the portal. If you do not have the key, go to Server Assessment> Discover> Manage existing appliances, select the primary appliance name, find the scale-out appliance associated with it and copy the corresponding key.

  2. You will need a device code to authenticate with Azure. Clicking on Login will open a modal with the device code as shown below.

    Modal showing the device code

  3. Click on Copy code & Login to copy the device code and open an Azure Login prompt in a new browser tab. If it doesn't appear, make sure you've disabled the pop-up blocker in the browser.

  4. On the new tab, paste the device code and sign-in by using your Azure username and password.

    Sign-in with a PIN isn't supported.

  5. In case you close the login tab accidentally without logging in, you need to refresh the browser tab of the appliance configuration manager to enable the Login button again.

  6. After you have successfully logged in, go back to the previous tab with the appliance configuration manager.

  7. If the Azure user account used for logging has the right permissions on the Azure resources created during key generation, the appliance registration will be initiated. Panel 2 on appliance configuration manager

Import appliance configuration from primary appliance

To complete the registration of the scale-out appliance, click import to get the necessary configuration files from the primary appliance.

  1. Clicking import opens a pop-up window with instructions on how to import the necessary configuration files from the primary appliance. Import configuration modal

  2. Login (remote desktop) to the primary appliance and execute the following PowerShell commands:

    PS cd 'C:\Program Files\Microsoft Azure Appliance Configuration Manager\Scripts\PowerShell'

    PS .\ExportConfigFiles.ps1

  3. Copy the zip file created by running the above commands to the scale-out appliance. The zip file contains configuration files needed to register the scale-out appliance.

  4. In the pop-up window opened in the previous step, select the location of the copied configuration zip file and click Save.

Once the files have been successfully imported, the registration of the scale-out appliance will complete and it will show you the timestamp of the last successful import. You can also see the registration details by clicking View details. Screenshot shows scale-out appliance registration with Azure Migrate project.

At this point, you should revalidate that the scale-out appliance is able to connect to your vCenter server. Click revalidate to validate vCenter Server connectivity from scale-out appliance. Screenshot shows view credentials and discovery sources to be validated.

Important

If you edit the vCenter Server credentials on the primary appliance, ensure that you import the configuration files again to the scale-out appliance to get the latest configuration and continue any ongoing replications.
If you do not need the scale-out appliance any longer, make sure that you disable the scale-out appliance. Learn more on how to disable the scale-out appliance when not needed.

Replicate

  1. After the scale-out appliance is registered, on the Azure Migrate: Server Migration tile, click Replicate.

  2. Follow the steps on the screen to start replicating more virtual machines.

With the scale-out appliance in place, you can now replicate 500 VMs concurrently. You can also migrate VMs in batches of 200 through the Azure portal.

Azure Migrate Server Migration tool will take care of distributing the virtual machines between the primary and scale-out appliance for replication. Once the replication is done, you can migrate the virtual machines.

Tip

We recommend migrating virtual machines in batches of 200 for optimal performance if you want to migrate a large number of virtual machines.

Next steps

In this article, you learned:

  • How to configure a scale-out appliance
  • How to replicate VMs using a scale-out appliance

Learn more about migrating servers to Azure using Azure Migrate: Server Migration tool.