Manage emergency access to a bare metal machine using the az networkcloud cluster bmckeyset
Caution
Please note this process is used in emergency situations when all other troubleshooting options via Azure have been exhausted. SSH access to these bare metal machines is restricted to users managed via this method from the specified jump host list.
There are rare situations where a user needs to investigate & resolve issues with a bare metal machine and all other ways using Azure have been exhausted. Operator Nexus provides the az networkcloud cluster bmckeyset command so users can manage SSH access to the baseboard management controller (BMC) on these bare metal machines. On keyset creation, users are validated against Microsoft Entra ID for proper authorization by cross referencing the User Principal Name provided for a user against the supplied Azure Group ID --azure-group-id <Entra Group ID>.
If the User Principal Name for a user isn't a member of the supplied group, the user's status is set to 'Invalid', and their status message will say "Invalid because userPrincipal isn't a member of AAD group." If the Azure Group ID is invalid, each user in the keyset has their status set to 'Invalid' and their status message will say "AAD group doesn't exist." Invalid users remain in the keyset but their key won't be enabled for SSH access.
Note
There is currently a transitional period where specifying User Principal Names is optional. In a future release, it will become mandatory and Microsoft Entra ID validation will be enforced for all users. Users are encouraged to add User Principal Names to their keysets before the transitional period ends (planned for July 2024) to avoid keysets being invalidated. Note that if any User Principal Names are added to a keyset, even if they are not added for all users, Microsoft Entra ID validation will be enabled, and this will result in the entire keyset being invalidated if the Group ID specified is not valid.
When the command runs, it executes on each bare metal machine in the Cluster with an active Kubernetes node. There's a reconciliation process that runs periodically that retries the command on any bare metal machine that wasn't available at the time of the original command. Also, any bare metal machine that returns to the cluster via an az networkcloud baremetalmachine actionreimage or az networkcloud baremetalmachine actionreplace command (see BareMetal functions) sends a signal causing any active keysets to be sent to the machine as soon as it returns to the cluster. Multiple commands execute in the order received.
The BMCs support a maximum number of 12 users. Users are defined on a per Cluster basis and applied to each bare metal machine. Attempts to add more than 12 users results in an error. Delete a user before adding another one when 12 already exists.
Prerequisites
- Install the latest version of the appropriate CLI extensions.
- The on-premises Cluster must have connectivity to Azure.
- Get the Resource Group name for the
Clusterresource. - The process applies keysets to all running bare metal machines.
- The users added must be part of a Microsoft Entra group. For more information, see How to Manage Groups.
- To restrict access for managing keysets, create a custom role. For more information, see Azure Custom Roles. In this instance, add or exclude permissions for
Microsoft.NetworkCloud/clusters/bmcKeySets. The options are/read,/write, and/delete.
Note
When BMC access is created, modified or deleted via the commands described in this
article, a background process delivers those changes to the machines. This process is paused during
Operator Nexus software upgrades. If an upgrade is known to be in progress, you can use the --no-wait
option with the command to prevent the command prompt from waiting for the process to complete.
Creating a BMC keyset
The bmckeyset create command creates SSH access to the bare metal machine in a Cluster for a group of users.
The command syntax is:
az networkcloud cluster bmckeyset create \
--name <BMC Keyset Name> \
--extended-location name=<Extended Location ARM ID> \
type="CustomLocation" \
--location <Azure Region> \
--azure-group-id <Azure AAD Group ID> \
--expiration <Expiration Timestamp> \
--jump-hosts-allowed <List of jump server IP addresses> \
--privilege-level <"Administrator" or "ReadOnly"> \
--user-list '[{"description":"<User List Description>","azureUserName":"<User Name>",\
"sshPublicKey":{"keyData":"<SSH Public Key>"}, \
"userPrincipalName":""}]', \
--tags key1=<Key Value> key2=<Key Value> \
--cluster-name <Cluster Name> \
--resource-group <Resource Group Name>
Create Arguments
--azure-group-id [Required] : The object ID of Azure Active Directory
group that all users in the list must
be in for access to be granted. Users
that are not in the group do not have
access.
--bmc-key-set-name --name -n [Required] : The name of the BMC key set.
--cluster-name [Required] : The name of the cluster.
--expiration [Required] : The date and time after which the users
in this key set are removed from
the BMCs. The limit is up to 1 year from creation.
Format is "YYYY-MM-DDTHH:MM:SS.000Z"
--extended-location [Required] : The extended location of the cluster
associated with the resource.
Usage: --extended-location name=XX type=XX
name: Required. The resource ID of the extended location on which the resource is created.
type: Required. The extended location type: "CustomLocation".
--privilege-level [Required] : The access level allowed for the users
in this key set. Allowed values:
"Administrator" or "ReadOnly".
--resource-group -g [Required] : Name of resource group. Optional if
configuring the default group using `az
configure --defaults group=<name>`.
--user-list [Required] : The unique list of permitted users.
Usage: --user-list azure-user-name=XX description=XX key-data=XX
azure-user-name: Required. User name used to login to the server.
description: The free-form description for this user.
key-data: Required. The public ssh key of the user.
userPrincipalName: Optional. The User Principal Name of the User.
Multiple users can be specified by using more than one --user-list argument.
--tags : Space-separated tags: key[=value]
[key[=value] ...]. Use '' to clear
existing tags.
--location -l : Azure Region. Values from: `az account
list-locations`. You can configure the
default location using `az configure
--defaults location=<location>`.
--no-wait : Do not wait for the long-running
operation to finish.
Global Azure CLI arguments (applicable to all commands)
--debug : Increase logging verbosity to show all
debug logs.
--help -h : Show this help message and exit.
--only-show-errors : Only show errors, suppressing warnings.
--output -o : Output format. Allowed values: json,
jsonc, none, table, tsv, yaml, yamlc.
Default: json.
--query : JMESPath query string. See
http://jmespath.org/ for more
information and examples.
--subscription [Required] : Name or ID of subscription. Optional if
configuring the default subscription
using `az account set -s NAME_OR_ID`.
--verbose : Increase logging verbosity. Use --debug
for full debug logs.
This example creates a new keyset with two users that have standard access from two jump hosts.
az networkcloud cluster bmckeyset create \
--name "bmcKeySetName" \
--extended-location name="/subscriptions/subscriptionId/resourceGroups/resourceGroupName/providers/Microsoft.ExtendedLocation/customLocations/clusterExtendedLocationName" \
type="CustomLocation" \
--location "location" \
--azure-group-id "f110271b-XXXX-4163-9b99-214d91660f0e" \
--expiration "2023-12-31T23:59:59.008Z" \
--privilege-level "Standard" \
--user-list '[{"description":"Needs access for troubleshooting as a part of the support team",\
"azureUserName":"userABC","sshPublicKey":{"keyData":"ssh-rsa AAtsE3njSONzDYRIZv/WLjVuMfrUSByHp+jfaaOLHTIIB4fJvo6dQUZxE20w2iDHV3tEkmnTo84eba97VMueQD6OzJPEyWZMRpz8UYWOd0IXeRqiFu1lawNblZhwNT/ojNZfpB3af/YDzwQCZgTcTRyNNhL4o/blKUmug0daSsSXISTRnIDpcf5qytjs1XoyYyJMvzLL59mhAyb3p/cD+Y3/s3WhAx+l0XOKpzXnblrv9d3q4c2tWmm/SyFqthaqd0= admin@vm"}},\
{"description":"Needs access for troubleshooting as a part of the support team",\
"azureUserName":"userXYZ","sshPublicKey":{"keyData":"ssh-rsa AAtsE3njSONzDYRIZv/WLjVuMfrUSByHp+jfaaOLHTIIB4fJvo6dQUZxE20w2iDHV3tEkmnTo84eba97VMueQD6OzJPEyWZMRpz8UYWOd0IXeRqiFu1lawNblZhwNT/ojNZfpB3af/YDzwQCZgTcTRyNNhL4o/blKUmug0daSsSXTSTRnIDpcf5qytjs1XoyYyJMvzLL59mhAyb3p/cD+Y3/s3WhAx+l0XOKpzXnblrv9d3q4c2tWmm/SyFqthaqd0= admin@vm"}}]' \
--tags key1="myvalue1" key2="myvalue2" \
--cluster-name "clusterName" \
--resource-group "resourceGroupName"
For assistance in creating the --user-list structure, see Azure CLI Shorthand.
Deleting a BMC keyset
The bmckeyset delete command removes SSH access to the BMC for a group of users. All members of the group lose SSH access to any of the BMCs in the Cluster.
The command syntax is:
az networkcloud cluster bmckeyset delete \
--name <BMC Keyset Name> \
--cluster-name <Cluster Name> \
--resource-group <Resource Group Name> \
Delete Arguments
--bmc-key-set-name --name -n [Required] : The name of the BMC key set to be deleted.
--cluster-name [Required] : The name of the cluster.
--resource-group -g [Required] : Name of resource group. Optional if configuring the
default group using `az configure --defaults
group=<name>`.
--no-wait : Do not wait for the long-running operation to finish.
--yes -y : Do not prompt for confirmation.
This example removes the "bmcKeysetName" keyset group in the "clusterName" Cluster.
az networkcloud cluster bmckeyset delete \
--name "bmcKeySetName" \
--cluster-name "clusterName" \
--resource-group "resourceGroupName" \
Updating a BMC Keyset
The bmckeyset update command allows users to make changes to an existing keyset group.
The command syntax is:
az networkcloud cluster bmckeyset update \
--name <BMC Keyset Name> \
--jump-hosts-allowed <List of jump server IP addresses> \
--privilege-level <"Standard" or "Superuser"> \
--user-list '[{"description":"<User List Description>","azureUserName":"<User Name>",\
"sshPublicKey":{"keyData":"<SSH Public Key>"}, \
"userPrincipalName":""}]', \
--tags key1=<Key Value> key2=<Key Value> \
--cluster-name <Cluster Name> \
--resource-group <Resource Group Name>
Update Arguments
--bmc-key-set-name --name -n [Required] : The name of the BMC key set.
--cluster-name [Required] : The name of the cluster.
--expiration : The date and time after which the users
in this key set are removed from
the BMCs. Format is:
"YYYY-MM-DDTHH:MM:SS.000Z"
--jump-hosts-allowed : The list of IP addresses of jump hosts
with management network access from
which a login is allowed for the
users. Supports IPv4 or IPv6 addresses.
--privilege-level : The access level allowed for the users
in this key set. Allowed values:
"Administrator" or "ReadOnly".
--user-list : The unique list of permitted users.
Usage: --user-list azure-user-name=XX description=XX key-data=XX
azure-user-name: Required. User name used to login to the server.
description: The free-form description for this user.
key-data: Required. The public SSH key of the user.
userPrincipalName: Optional. The User Principal Name of the User.
Multiple users can be specified by using more than one --user-list argument.
--resource-group -g [Required] : Name of resource group. Optional if
configuring the default group using `az
configure --defaults group=<name>`.
--tags : Space-separated tags: key[=value]
[key[=value] ...]. Use '' to clear
existing tags.
--no-wait : Do not wait for the long-running
operation to finish.
This example adds two new users to the "bmcKeySetName" group and changes the expiry time for the group.
az networkcloud cluster bmckeyset update \
--name "bmcKeySetName" \
--expiration "2023-12-31T23:59:59.008Z" \
--user-list '[{"description":"Needs access for troubleshooting as a part of the support team",\
"azureUserName":"userDEF", \
"sshPublicKey":{"keyData":"ssh-rsa AAtsE3njSONzDYRIZv/WLjVuMfrUSByHp+jfaaOLHTIIB4fJvo6dQUZxE20w2iDHV3tEkmnTo84eba97VMueQD6OzJPEyWZMRpz8UYWOd0IXeRqiFu1lawNblZhwNT/ojNZfpB3af/YDzwQCZgTcTRyNNhL4o/blKUmug0daSsSXISTRnIDpcf5qytjs1XoyYyJMvzLL59mhAyb3p/cD+Y3/s3WhAx+l0XOKpzXnblrv9d3q4c2tWmm/SyFqthaqd0= admin@vm"}, \
"userPrincipalName":"example@contoso.com"}] \
--cluster-name "clusterName" \
--resource-group "resourceGroupName"
Listing BMC Keysets
The bmckeyset list command allows users to see the existing keyset groups in a Cluster.
The command syntax is:
az networkcloud cluster bmckeyset list \
--cluster-name <Cluster Name> \
--resource-group <Resource Group Name>
List Arguments
--cluster-name [Required] : The name of the cluster.
--resource-group -g [Required] : Name of resource group. Optional if
configuring the default group using `az
configure --defaults group=<name>`.
Show BMC Keyset Details
The bmckeyset show command allows users to see the details of an existing keyset group in a Cluster.
The command syntax is:
az networkcloud cluster bmckeyset show \
--cluster-name <Cluster Name> \
--resource-group <Resource Group Name>
Show Arguments
--bmc-key-set-name --name -n [Required] : The name of the BMC key set.
--cluster-name [Required] : The name of the cluster.
--resource-group -g [Required] : Name of resource group. You can
configure the default group using `az
configure --defaults group=<name>`.
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for