What is Azure Private Endpoint?

A private endpoint is a network interface that uses a private IP address from your virtual network. This network interface connects you privately and securely to a service powered by Azure Private Link. By enabling a private endpoint, you're bringing the service into your virtual network.

The service could be an Azure service such as:

Private Endpoint properties

A Private Endpoint specifies the following properties:

Property Description
Name A unique name within the resource group.
Subnet The subnet to deploy and where the private IP address is assigned. For subnet requirements, see the limitations section in this article.
Private Link Resource The private link resource to connect using resource ID or alias, from the list of available types. A unique network identifier will be generated for all traffic sent to this resource.
Target subresource The subresource to connect. Each private link resource type has different options to select based on preference.
Connection approval method Automatic or manual. Depending on Azure role based access control permissions, your private endpoint can be approved automatically. If you try to connect to a private link resource without Azure role-based access control, use the manual method to allow the owner of the resource to approve the connection.
Request Message You can specify a message for requested connections to be approved manually. This message can be used to identify a specific request.
Connection status A read-only property that specifies if the private endpoint is active. Only private endpoints in an approved state can be used to send traffic. More states available:
-Approved: Connection was automatically or manually approved and is ready to be used.

-Pending: Connection was created manually and is pending approval by the private link resource owner.

-Rejected: Connection was rejected by the private link resource owner.

-Disconnected: Connection was removed by the private link resource owner. The private endpoint becomes informative and should be deleted for cleanup.

Some key details about private endpoints:

  • Private endpoint enables connectivity between the consumers from the same:

    • Virtual Network
    • Regionally peered virtual networks
    • Globally peered virtual networks
    • On premises using VPN or Express Route
    • Services powered by Private Link
  • Network connections can only be initiated by clients connecting to the private endpoint. Service providers don't have routing configuration to create connections into service consumers. Connections can only be established in a single direction.

  • When creating a private endpoint, a read-only network interface is created for the lifecycle of the resource. The interface is assigned a dynamic private IP address from the subnet that maps to the private link resource. The value of the private IP address remains unchanged for the entire lifecycle of the private endpoint.

  • The private endpoint must be deployed in the same region and subscription as the virtual network.

  • The private link resource can be deployed in a different region than the virtual network and private endpoint.

  • Multiple private endpoints can be created using the same private link resource. For a single network using a common DNS server configuration, the recommended practice is to use a single private endpoint for a given private link resource. Use this practice to avoid duplicate entries or conflicts in DNS resolution.

  • Multiple private endpoints can be created on the same or different subnets within the same virtual network. There are limits to the number of private endpoints you can create in a subscription. For details, see Azure limits.

  • The subscription from the private link resource must also be registered with Microsoft. Network resource provider. For details, see Azure Resource Providers.

A private link resource is the destination target of a given private endpoint.

The table below lists the available resources that support a private endpoint:

Private link resource name Resource type Subresources
Azure App Configuration Microsoft.Appconfiguration/configurationStores configurationStores
Azure Automation Microsoft.Automation/automationAccounts Webhook, DSCAndHybridWorker
Azure Cosmos DB Microsoft.AzureCosmosDB/databaseAccounts Sql, MongoDB, Cassandra, Gremlin, Table
Azure Batch Microsoft.Batch/batchAccounts batch account
Azure Cache for Redis Microsoft.Cache/Redis redisCache
Azure Cache for Redis Enterprise Microsoft.Cache/redisEnterprise redisEnterprise
Cognitive Services Microsoft.CognitiveServices/accounts account
Azure Managed Disks Microsoft.Compute/diskAccesses managed disk
Azure Container Registry Microsoft.ContainerRegistry/registries registry
Azure Kubernetes Service - Kubernetes API Microsoft.ContainerService/managedClusters management
Azure Data Factory Microsoft.DataFactory/factories data factory
Azure Database for MariaDB Microsoft.DBforMariaDB/servers mariadbServer
Azure Database for MySQL Microsoft.DBforMySQL/servers mysqlServer
Azure Database for PostgreSQL - Single server Microsoft.DBforPostgreSQL/servers postgresqlServer
Azure IoT Hub Microsoft.Devices/IotHubs iotHub
Microsoft Digital Twins Microsoft.DigitalTwins/digitalTwinsInstances digitaltwinsinstance
Azure Event Grid Microsoft.EventGrid/domains domain
Azure Event Grid Microsoft.EventGrid/topics Event grid topic
Azure Event Hub Microsoft.EventHub/namespaces namespace
Azure HDInsight Microsoft.HDInsight/clusters cluster
Azure API for FHIR Microsoft.HealthcareApis/services service
Azure Keyvault HSM Microsoft.Keyvault/managedHSMs HSM
Azure Key Vault Microsoft.KeyVault/vaults vault
Azure Machine Learning Microsoft.MachineLearningServices/workspaces amlworkspace
Azure Migrate Microsoft.Migrate/assessmentProjects project
Application Gateway Microsoft.Network/applicationgateways application gateway
Private Link Service (Your own service) Microsoft.Network/privateLinkServices empty
Power BI Microsoft.PowerBI/privateLinkServicesForPowerBI Power BI
Azure Purview Microsoft.Purview/accounts account
Azure Purview Microsoft.Purview/accounts portal
Azure Backup Microsoft.RecoveryServices/vaults vault
Azure Relay Microsoft.Relay/namespaces namespace
Microsoft Search Microsoft.Search/searchServices search service
Azure Service Bus Microsoft.ServiceBus/namespaces namespace
SignalR Microsoft.SignalRService/SignalR signalr
SignalR Microsoft.SignalRService/webPubSub webpubsub
Azure SQL Database Microsoft.Sql/servers Sql Server (sqlServer)
Azure Storage Microsoft.Storage/storageAccounts Blob (blob, blob_secondary)
Table (table, table_secondary)
Queue (queue, queue_secondary)
File (file, file_secondary)
Web (web, web_secondary)
Azure File Sync Microsoft.StorageSync/storageSyncServices File Sync Service
Azure Synapse Microsoft.Synapse/privateLinkHubs synapse
Azure Synapse Analytics Microsoft.Synapse/workspaces Sql, SqlOnDemand, Dev
Azure App Service Microsoft.Web/hostingEnvironments hosting environment
Azure App Service Microsoft.Web/sites sites
Azure App Service Microsoft.Web/staticSites staticSite

Network security of private endpoints

When using private endpoints, traffic is secured to a private link resource. The platform does an access control to validate network connections reaching only the specified private link resource. To access more resources within the same Azure service, extra private endpoints are required.

You can completely lock down your workloads from accessing public endpoints to connect to a supported Azure service. This control provides an extra network security layer to your resources. The security provides protection that prevents access to other resources hosted on the same Azure service.

You can connect to a private link resource using the following connection approval methods:

  • Automatically approved when you own or have permission on the specific private link resource. The permission required is based on the private link resource type in the following format: Microsoft.<Provider>/<resource_type>/privateEndpointConnectionsApproval/action
  • Manual request when you don't have the permission required and would like to request access. An approval workflow will be initiated. The private endpoint and later private endpoint connections will be created in a "Pending" state. The private link resource owner is responsible to approve the connection. After it's approved, the private endpoint is enabled to send traffic normally, as shown in the following approval workflow diagram.

workflow approval

The private link resource owner can do the following actions over a private endpoint connection:

  • Review all private endpoint connections details.
  • Approve a private endpoint connection. The corresponding private endpoint will be enabled to send traffic to the private link resource.
  • Reject a private endpoint connection. The corresponding private endpoint will be updated to reflect the status.
  • Delete a private endpoint connection in any state. The corresponding private endpoint will be updated with a disconnected state to reflect the action, the private endpoint owner can only delete the resource at this point.


Only a private endpoint in an approved state can send traffic to a given private link resource.

Connect with alias

Alias is a unique moniker that is generated when the service owner creates the private link service behind a standard load balancer. Service owners can share this alias with their consumers offline.

Consumers can request a connection to private link service using either the resource URI or the alias. If you want to connect using alias, you must create a private endpoint using the manual connection approval method. For using manual connection approval method, set manual request parameter to true during private endpoint create flow. For more information, see New-AzPrivateEndpoint and az network private-endpoint create.

DNS configuration

The DNS settings used for connections to a private link resource are important. Ensure your DNS settings are correct when you use the fully qualified domain name (FQDN) for the connection. The settings must resolve to the private IP address of the private endpoint. Existing Azure services might already have a DNS configuration to use when connecting over a public endpoint. This configuration must be overwritten to connect using your private endpoint.

The network interface associated with the private endpoint contains the information required to configure your DNS. The information includes the FQDN and private IP address for a private link resource.

For complete detailed information about recommendations to configure DNS for private endpoints, see Private Endpoint DNS configuration.


The following table includes a list of known limitations when using private endpoints:

Limitation Description Mitigation
Traffic destined to a private endpoint using a user-defined route may be asymmetric. Return traffic from a private endpoint bypasses a Network Virtual Appliance (NVA) and attempts to return to the source VM. Source Network Address Translation (SNAT) is used to ensure symmetric routing. For all traffic destined to a private endpoint using a UDR, it's recommended to use SNAT for traffic at the NVA.


NSG and UDR support for private endpoints are in public preview on select regions. For more information, see Public preview of Private Link UDR Support and Public preview of Private Link Network Security Group Support. This preview version is provided without a service level agreement, and it's not recommended for production workloads. Certain features might not be supported or might have constrained capabilities. For more information, see Supplemental Terms of Use for Microsoft Azure Previews.

Public preview limitations


Limitation Description Mitigation
Obtain effective routes and security rules won't be available on a private endpoint network interface. You aren't able to navigate to the network interface to see relevant information on the effective routes and security rules. Q4CY21
NSG flow logs not supported. NSG flow logs won't work for inbound traffic destined for a private endpoint. No information at this time.
Intermittent drops with ZRS storage accounts. Customers using ZRS storage account may see periodic intermittent drops even with allow NSG applied on storage private endpoint subnet. September
Intermittent drops with Azure Key Vault. Customers using Azure Key Vault may see periodic intermittent drops even with allow NSG applied on Azure Key Vault private endpoint subnet. September
Limit on number of address prefixes per NSG. Having more than 500 address prefixes in NSG in a single rule isn't supported. September
AllowVirtualNetworkAccess flag Customers setting VNet peering on their VNet (VNet A) with AllowVirtualNetworkAccess flag set to false on the peering link to another VNet (VNet B) can't use the VirtualNetwork tag to deny traffic from VNet B accessing private endpoint resources. They'll need to explicitly place a block for VNet B’s address prefix to deny traffic to the private endpoint. September
Dual port NSG rules unsupported. If multiple port ranges are used with NSG rules, only the first port range is honored for allow rules and deny rules. Rules with multiple port ranges are defaulted to deny all instead of specific ports.
For more information, see rule example below.
Priority Source port Destination port Action Effective action
10 10-12 10-12 Allow/Deny Single port range in source/destination ports will work as expected.
10 10-12, 13-14 14-15, 16-17 Allow Only source ports 10-12 and destination ports 14-15 will be allowed.
10 10-12, 13-14 120-130, 140-150 Deny Traffic from all source ports will be denied to all dest ports since there are multiple source and destination port ranges.
10 10-12, 13-14 120-130 Deny Traffic from all source ports will be denied to destination ports 120-130 only. There are multiple source port ranges and a single destination port range.

Table: Example dual port rule.


Limitation Description Mitigation
Source Network Address Translation (SNAT) is recommended always. Because of the variable nature of the private endpoint data-plane, it's recommended to SNAT traffic destined to a private endpoint to ensure return traffic is honored. No information at this time.

Next steps