ControlClone Class

Definition

Defines the ControlClone Class.

This class is available in Office 2010 and above.

When the object is serialized out as xml, it's qualified name is mso14:control.

[DocumentFormat.OpenXml.OfficeAvailability(DocumentFormat.OpenXml.FileFormatVersions.Office2010)]
[DocumentFormat.OpenXml.SchemaAttr(57, "control")]
public class ControlClone : DocumentFormat.OpenXml.OpenXmlLeafElement
public class ControlClone : DocumentFormat.OpenXml.OpenXmlLeafElement
[DocumentFormat.OpenXml.SchemaAttr(57, "control")]
public class ControlClone : DocumentFormat.OpenXml.OpenXmlLeafElement
[DocumentFormat.OpenXml.SchemaAttr("mso14:control")]
public class ControlClone : DocumentFormat.OpenXml.OpenXmlLeafElement
[DocumentFormat.OpenXml.SchemaAttr("mso14:control")]
public class ControlClone : DocumentFormat.OpenXml.TypedOpenXmlLeafElement
[DocumentFormat.OpenXml.OfficeAvailability(DocumentFormat.OpenXml.FileFormatVersions.Office2010)]
public class ControlClone : DocumentFormat.OpenXml.OpenXmlLeafElement
[<DocumentFormat.OpenXml.OfficeAvailability(DocumentFormat.OpenXml.FileFormatVersions.Office2010)>]
[<DocumentFormat.OpenXml.SchemaAttr(57, "control")>]
type ControlClone = class
    inherit OpenXmlLeafElement
type ControlClone = class
    inherit OpenXmlLeafElement
[<DocumentFormat.OpenXml.SchemaAttr(57, "control")>]
type ControlClone = class
    inherit OpenXmlLeafElement
[<DocumentFormat.OpenXml.SchemaAttr("mso14:control")>]
type ControlClone = class
    inherit OpenXmlLeafElement
[<DocumentFormat.OpenXml.SchemaAttr("mso14:control")>]
type ControlClone = class
    inherit TypedOpenXmlLeafElement
[<DocumentFormat.OpenXml.OfficeAvailability(DocumentFormat.OpenXml.FileFormatVersions.Office2010)>]
type ControlClone = class
    inherit OpenXmlLeafElement
Public Class ControlClone
Inherits OpenXmlLeafElement
Public Class ControlClone
Inherits TypedOpenXmlLeafElement
Inheritance
Inheritance
Attributes

Remarks

2.3.36 CT_ControlClone

Target namespace: http://schemas.microsoft.com/office/2009/07/customui

Referenced by: CT_Box, CT_Group

Specifies a clone of an existing control. Built-in controls are specified with the idMso attribute. Custom controls are specified with the idQ attribute.

Attributes:

size: An ST_Size attribute, as specified in section 2.4.18, that specifies the size of this control. The size and getSize attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, the control defaults to the normal size.

getSize: An ST_Delegate attribute, as specified in section 2.4.7, that specifies the name of a callback function that is called to determine the size of this control. The size and getSize attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, the control defaults to the normal size.

enabled: A Boolean attribute that specifies the enabled state of this control. The enabled and getEnabled attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, the control defaults to being enabled.

getEnabled: An ST_Delegate attribute that specifies the name of a callback function that is called to determine the enabled state of this control. The enabled and getEnabled attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, the control defaults to being enabled.

description: An ST_LongString attribute, as specified in section 2.4.16, that specifies a string that is displayed as the description of the control in detailed views. The description and getDescription attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, a detailed description is not displayed.

getDescription: An ST_Delegate attribute that specifies the name of a callback function that is called to determine the detailed description of this control. The description and getDescription attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, a detailed description is not displayed.

image: An ST_Uri attribute, as specified in section 2.4.23, that specifies the relationship identifier of an image file that is used as the icon for this control. The image, getImage, and imageMso attributes are mutually exclusive. They MUST NOT be used together. If none of these attributes are specified, an icon is not displayed.

imageMso: An ST_ID attribute, as specified in section 2.4.12, that specifies the identifier of a built-in image that is used as the icon for this control. The image, getImage, and imageMso attributes are mutually exclusive. They MUST NOT be used together. If none of these attributes are specified, an icon is not displayed.

getImage: An ST_Delegate attribute, as specified in section 2.4.7, that specifies the name of a callback function that is called to determine the icon of this control. The image, getImage, and imageMso attributes are mutually exclusive. They MUST NOT be used together. If none of these attributes are specified, an icon is not displayed.

idQ: An ST_QID attribute, as specified in section 2.4.17, that specifies the qualified identifier of a control. This attribute is used to reference controls or containers created by other Custom UI documents. The id, idQ, and idMso attributes are mutually exclusive. Exactly one of these attributes MUST be specified on all controls.

tag: An ST_String attribute, as specified in section 2.4.19, that specifies an arbitrary string that provides additional information about this control during callback function calls. If this attribute is omitted, the value defaults to an empty string.

idMso: An ST_ID attribute, as specified in section 2.4.12, that specifies the identifier of a built-in control. The id, idQ, and idMso attributes are mutually exclusive. Exactly one of these attributes MUST be specified.

screentip: An ST_String attribute, as specified in section 2.4.19, that specifies a string that is displayed as the tooltip for this control. The screentip and getScreentip attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, a tooltip is not displayed.

getScreentip: An ST_Delegate attribute that specifies the name of a callback function that is called to determine the tooltip of this control. The screentip and getScreentip attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, a tooltip is not displayed.

supertip: An ST_String attribute that specifies a string that is displayed as the Enhanced ScreenTip of this control. The supertip and getSupertip attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, an Enhanced ScreenTip is not displayed.

getSupertip: An ST_Delegate attribute that specifies the name of a callback function that is called to determine the Enhanced ScreenTip of this control. The supertip and getSupertip attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, an Enhanced ScreenTip is not displayed.

label: An ST_String attribute that specifies a string that is displayed as the label of this control. The label and getLabel attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, a label is not displayed.

getLabel: An ST_Delegate attribute that specifies the name of a callback function that is called to determine the label of this control. The label and getLabel attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, a label is not displayed.

insertAfterMso: An ST_ID attribute that specifies the identifier of a built-in control after which this control will be inserted. The insertAfterMso, insertAfterQ, insertBeforeMso, and insertBeforeQ attributes are mutually exclusive. They MUST NOT be used together. If none of these attributes is specified, the controls will be appended to the existing set of controls, in the order they are defined in the XML.

insertBeforeMso: An ST_ID attribute that specifies the identifier of a built-in control before which this control will be inserted. The insertAfterMso, insertAfterQ, insertBeforeMso, and insertBeforeQ attributes are mutually exclusive. They MUST NOT be used together. If none of these attributes is specified, the controls will be appended to the existing set of controls, in the order they are defined in the XML.

insertAfterQ: An ST_QID attribute, as specified in section 2.4.17, that specifies the qualified identifier of a control after which this control will be inserted. The insertAfterMso, insertAfterQ, insertBeforeMso, and insertBeforeQ attributes are mutually exclusive. They MUST NOT be used together. If none of these attributes is specified, the controls will be appended to the existing set of controls, in the order they are defined in the XML.

insertBeforeQ: An ST_QID attribute that specifies the qualified identifier of a control before which this control will be inserted. The insertAfterMso, insertAfterQ, insertBeforeMso, and insertBeforeQ attributes are mutually exclusive. They MUST NOT be used together. If none of these attributes is specified, the controls will be appended to the existing set of controls, in the order they are defined in the XML.

visible: A Boolean attribute that specifies the visibility state of this control. The visible and getVisible attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, the control defaults to being visible.

getVisible: An ST_Delegate attribute that specifies the name of a callback function that is called to determine the visibility state of this control. The visible and getVisible attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, the control defaults to being visible.

keytip: An ST_Keytip attribute, as specified in section 2.4.14, that specifies a string that is displayed as the KeyTip for this control. The keytip and getKeytip attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, a KeyTip is not displayed.

getKeytip: An ST_Delegate attribute that specifies the name of a callback function that is called to determine the KeyTip for this control. The keytip and getKeytip attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, a KeyTip is not displayed.

showLabel: A Boolean attribute that specifies whether the label for this control will be displayed. The showLabel and getShowLabel attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, the label of the control will be displayed.

getShowLabel: An ST_Delegate attribute that specifies the name of a callback function that is called to determine whether to display the label of this control. The showLabel and getShowLabel attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, the label of the control will be displayed.

showImage: A Boolean attribute that specifies whether the icon for this control will be displayed. The showImage and getShowImage attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, the icon of the control will be displayed.

getShowImage: An ST_Delegate attribute that specifies the name of a callback function that is called to determine whether to display the icon of this control. The showImage and getShowImage attributes are mutually exclusive. They MUST NOT be used together. If neither attribute is specified, the icon of the control will be displayed.

The following W3C XML Schema ([XMLSCHEMA1] section 2.1) fragment specifies the contents of this complex type.

<xsd:complexType name="CT_ControlClone">

<xsd:complexContent>

<xsd:restriction base="CT_Button">

<xsd:attribute name="id" use="prohibited"/>

<xsd:attribute name="onAction" use="prohibited"/>

</xsd:restriction>

</xsd:complexContent>

</xsd:complexType>

See section 5.1 for the full W3C XML Schema ([XMLSCHEMA1] section 2.1).

Constructors

ControlClone()

Initializes a new instance of the ControlClone class.

Properties

ChildElements

Gets all the child nodes of the current element.

(Inherited from OpenXmlElement)
Description

description, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: description

Enabled

enabled, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: enabled

ExtendedAttributes

Gets all extended attributes (attributes not defined in the schema) of the current element.

(Inherited from OpenXmlElement)
Features

Gets a IFeatureCollection for the current element. This feature collection will be read-only, but will inherit features from its parent part and package if available.

(Inherited from OpenXmlElement)
FirstChild

Gets the first child of the OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no such OpenXmlElement element.

(Inherited from OpenXmlElement)
GetDescription

getDescription, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: getDescription

GetEnabled

getEnabled, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: getEnabled

GetImage

getImage, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: getImage

GetKeytip

getKeytip, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: getKeytip

GetLabel

getLabel, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: getLabel

GetScreentip

getScreentip, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: getScreentip

GetShowImage

getShowImage, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: getShowImage

GetShowLabel

getShowLabel, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: getShowLabel

GetSize

getSize, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: getSize

GetSupertip

getSupertip, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: getSupertip

GetVisible

getVisible, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: getVisible

HasAttributes

Gets a value indicating whether the current element has any attributes.

(Inherited from OpenXmlElement)
HasChildren

Gets a value that indicates whether the current element has any child elements.

(Inherited from OpenXmlLeafElement)
IdMso

idMso, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: idMso

Image

image, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: image

ImageMso

imageMso, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: imageMso

InnerText

Gets or sets the concatenated values of the node and all of its children.

(Inherited from OpenXmlElement)
InnerXml

Gets or sets the markup that only represents child elements of the current element.

(Inherited from OpenXmlLeafElement)
InsertAfterMso

insertAfterMso, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: insertAfterMso

InsertAfterQulifiedId

insertAfterQ, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: insertAfterQ

InsertBeforeMso

insertBeforeMso, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: insertBeforeMso

InsertBeforeQulifiedId

insertBeforeQ, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: insertBeforeQ

Keytip

keytip, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: keytip

Label

label, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: label

LastChild

Gets the last child of the OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no such OpenXmlElement element.

(Inherited from OpenXmlElement)
LocalName
LocalName

Gets the local name of the current element.

(Inherited from OpenXmlElement)
MCAttributes

Gets or sets the markup compatibility attributes. Returns null if no markup compatibility attributes are defined for the current element.

(Inherited from OpenXmlElement)
NamespaceDeclarations

Gets all the namespace declarations defined in the current element. Returns an empty enumerator if there is no namespace declaration.

(Inherited from OpenXmlElement)
NamespaceUri

Gets the namespace URI of the current element.

(Inherited from OpenXmlElement)
OpenXmlElementContext

Gets the OpenXmlElementContext of the current element.

(Inherited from OpenXmlElement)
OuterXml

Gets the markup that represents the current element and all of its child elements.

(Inherited from OpenXmlElement)
Parent

Gets the parent element of the current element.

(Inherited from OpenXmlElement)
Prefix

Gets the namespace prefix of current element.

(Inherited from OpenXmlElement)
QualifiedId

idQ, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: idQ

Screentip

screentip, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: screentip

ShowImage

showImage, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: showImage

ShowLabel

showLabel, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: showLabel

Size

size, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: size

Supertip

supertip, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: supertip

Tag

tag, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: tag

Visible

visible, this property is only available in Office 2010 and later.

Represents the following attribute in the schema: visible

XmlQualifiedName

Gets the qualified name of the current element.

(Inherited from OpenXmlElement)
XName

Gets the qualified name of the current element.

(Inherited from OpenXmlElement)

Methods

AddAnnotation(Object)

Adds an object to the current OpenXmlElement element's list of annotations.

(Inherited from OpenXmlElement)
AddNamespaceDeclaration(String, String)

Adds a namespace declaration to the current node.

(Inherited from OpenXmlElement)
Ancestors()

Enumerates all of the current element's ancestors.

(Inherited from OpenXmlElement)
Ancestors<T>()

Enumerates only the current element's ancestors that have the specified type.

(Inherited from OpenXmlElement)
Annotation(Type)

Get the first annotation object of the specified type from the current OpenXmlElement element.

(Inherited from OpenXmlElement)
Annotation<T>()

Get the first annotation object of the specified type from the current OpenXmlElement element.

(Inherited from OpenXmlElement)
Annotations(Type)

Gets a collection of annotations with the specified type for the current OpenXmlElement element.

(Inherited from OpenXmlElement)
Annotations<T>()

Gets a collection of annotations with the specified type for the current OpenXmlElement element.

(Inherited from OpenXmlElement)
Append(IEnumerable<OpenXmlElement>)

Appends each element from a list of elements to the end of the current element's list of child elements.

(Inherited from OpenXmlElement)
Append(OpenXmlElement[])

Appends each element from an array of elements to the end of the current element's list of child elements.

(Inherited from OpenXmlElement)
AppendChild<T>(T)

Appends the specified element to the end of the current element's list of child nodes.

(Inherited from OpenXmlElement)
ClearAllAttributes()

Clears all of the attributes, including both known attributes and extended attributes.

(Inherited from OpenXmlElement)
Clone()

Creates a duplicate of the current node.

(Inherited from OpenXmlElement)
CloneNode(Boolean)

Creates a duplicate of this node.

Descendants()

Enumerates all of the current element's descendants.

(Inherited from OpenXmlElement)
Descendants<T>()

Enumerate all of the current element's descendants of type T.

(Inherited from OpenXmlElement)
Elements()

Enumerates all of the current element's children.

(Inherited from OpenXmlElement)
Elements<T>()

Enumerates only the current element's children that have the specified type.

(Inherited from OpenXmlElement)
ElementsAfter()

Enumerates all of the sibling elements that follow the current element and have the same parent as the current element.

(Inherited from OpenXmlElement)
ElementsBefore()

Enumerates all of the sibling elements that precede the current element and have the same parent as the current element.

(Inherited from OpenXmlElement)
GetAttribute(String, String)

Gets an Open XML attribute with the specified tag name and namespace URI.

(Inherited from OpenXmlElement)
GetAttributes()

Gets a list that contains a copy of all the attributes.

(Inherited from OpenXmlElement)
GetEnumerator()

Returns an enumerator that iterates through the child collection.

(Inherited from OpenXmlElement)
GetFirstChild<T>()

Finds the first child element in type T.

(Inherited from OpenXmlElement)
InsertAfter<T>(T, OpenXmlElement)

Inserts the specified element immediately after the specified reference element.

(Inherited from OpenXmlElement)
InsertAfterSelf<T>(T)

Inserts the specified element immediately after the current element.

(Inherited from OpenXmlElement)
InsertAt<T>(T, Int32)

Inserts the specified element at the specified index in the current element's list of child elements.

(Inherited from OpenXmlElement)
InsertBefore<T>(T, OpenXmlElement)

Inserts the specified element immediately before the specified reference element.

(Inherited from OpenXmlElement)
InsertBeforeSelf<T>(T)

Inserts the specified element immediately before the current element.

(Inherited from OpenXmlElement)
IsAfter(OpenXmlElement)

Determines if the current element appears after a specified element in document order.

(Inherited from OpenXmlElement)
IsBefore(OpenXmlElement)

Determines if the current element appears before a specified element in document order.

(Inherited from OpenXmlElement)
LookupNamespace(String)

Resolves the namespace prefix in the context of the current node.

(Inherited from OpenXmlElement)
LookupPrefix(String)

Finds the corresponding prefix for a namespace uri in the current element scope.

(Inherited from OpenXmlElement)
NextSibling()

Gets the OpenXmlElement element that immediately follows the current OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no next OpenXmlElement element.

(Inherited from OpenXmlElement)
NextSibling<T>()

Gets the OpenXmlElement element with the specified type that follows the current OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no next OpenXmlElement.

(Inherited from OpenXmlElement)
PrependChild<T>(T)

Inserts the specified element at the beginning of the current element's list of child elements.

(Inherited from OpenXmlElement)
PreviousSibling()

Gets the OpenXmlElement element that immediately precedes the current OpenXmlElement element. Returns null (Nothing in Visual Basic ) if there is no preceding OpenXmlElement element.

(Inherited from OpenXmlElement)
PreviousSibling<T>()

Gets the OpenXmlElement element with the specified type that precedes the current OpenXmlElement. Returns null (Nothing in Visual Basic) if there is no preceding OpenXmlElement element.

(Inherited from OpenXmlElement)
Remove()

Removes the current element from its parent.

(Inherited from OpenXmlElement)
RemoveAllChildren()

Removes all child elements of the current element.

(Inherited from OpenXmlLeafElement)
RemoveAllChildren<T>()

Remove all of the current element's child elements that are of type T.

(Inherited from OpenXmlElement)
RemoveAnnotations(Type)

Removes the annotations of the specified type from the current OpenXmlElement element.

(Inherited from OpenXmlElement)
RemoveAnnotations<T>()

Removes the annotations with the specified type from the current OpenXmlElement element.

(Inherited from OpenXmlElement)
RemoveAttribute(String, String)

Removes the attribute from the current element.

(Inherited from OpenXmlElement)
RemoveChild<T>(T)

Removes the specified child element from the current element's list of child elements.

(Inherited from OpenXmlElement)
RemoveNamespaceDeclaration(String)

Removes the namespace declaration for the specified prefix. Removes nothing if there is no prefix.

(Inherited from OpenXmlElement)
ReplaceChild<T>(OpenXmlElement, T)

Replaces a child element with another child element in the current element's list of child elements.

(Inherited from OpenXmlElement)
SetAttribute(OpenXmlAttribute)

Sets an attribute to the specified element. If the attribute is a known attribute, the value of the attribute is set. If the attribute is an extended attribute, the 'openxmlAttribute' is added to the extended attributes list.

(Inherited from OpenXmlElement)
SetAttributes(IEnumerable<OpenXmlAttribute>)

Sets a number of attributes to the element. If an attribute is a known attribute, the value of the attribute is set. If an attribute is an extended attribute, the 'openxmlAttribute' is added to the extended attributes list.

(Inherited from OpenXmlElement)
WriteTo(XmlWriter)

Saves the current node to the specified XmlWriter.

(Inherited from OpenXmlElement)

Explicit Interface Implementations

IEnumerable.GetEnumerator() (Inherited from OpenXmlElement)
IEnumerable<OpenXmlElement>.GetEnumerator()

Returns an enumerator that iterates through the child collection.

(Inherited from OpenXmlElement)

Applies to