DisplayHangulFixedWidth DisplayHangulFixedWidth DisplayHangulFixedWidth Class

Definition

Always Use Fixed Width for Hangul Characters. When the object is serialized out as xml, its qualified name is w:displayHangulFixedWidth.

public class DisplayHangulFixedWidth : DocumentFormat.OpenXml.Wordprocessing.OnOffType
type DisplayHangulFixedWidth = class
    inherit OnOffType
Public Class DisplayHangulFixedWidth
Inherits OnOffType
Inheritance

Remarks

[ISO/IEC 29500-1 1st Edition]

displayHangulFixedWidth (Always Use Fixed Width for Hangul Characters)

This element specifies whether applications should assume that all characters in the Hangul Syllables Unicode sub range (character values between 0xAC00 and 0xD7FF) are of a single fixed width or shall use the characters widths defined by the font in use (typical for a proportional width font).

Typically, applications shall retrieve the character width for any character in a document from the associated font, allowing each character to be of its own width (a proportional width character). This element, when present with a val attribute value of true (or equivalent), specifies that applications shall instead assume a single fixed width for all characters in the Hangul Syllables sub range, by reading the width of Unicode character 0x4E00 from the associated font and using that width for all Hangul characters (or, if that character is not present, the next available character in the font).

[Example: Consider a WordprocessingML document with three Hangul characters:

c19ce61c-65d0-482e-b724-147d3a148c6e

The default presentation would have each of those characters using the widths defined by the font (the highlighting indicates that each character has its own width):

624a6ec5-d67d-472f-b611-461253ad3fb4

However, if this compatibility setting is turned on:

<w:compat>  
  <w:displayHangulFixedWidth />  
</w:compat>  

Then all three characters are forced to the fixed width of character 0x4E00 from the font (or, in this case, the next available character), resulting in the characters in the font being forced to that fixed width, which results in the following output:

feaacb26-0583-41a8-835e-8558ab0ea5ee

Notice from the highlighting that the characters have been compressed to the width of the single character and displayed at that fixed width. end example]

Parent Elements
compat (Part 1, §17.15.1.21)

This element’s content model is defined by the common boolean property definition in Part 1, §17.17.4.

� ISO/IEC29500: 2008.

Constructors

DisplayHangulFixedWidth() DisplayHangulFixedWidth() DisplayHangulFixedWidth()

Initializes a new instance of the DisplayHangulFixedWidth class.

Properties

ChildElements ChildElements ChildElements

Gets all the child nodes of the current element.

(Inherited from OpenXmlElement)
ExtendedAttributes ExtendedAttributes ExtendedAttributes

Gets all extended attributes (attributes not defined in the schema) of the current element.

(Inherited from OpenXmlElement)
FirstChild FirstChild FirstChild

Gets the first child of the OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no such OpenXmlElement element.

(Inherited from OpenXmlElement)
HasAttributes HasAttributes HasAttributes

Gets a boolean value that indicates whether the current element has any attributes.

(Inherited from OpenXmlElement)
HasChildren HasChildren HasChildren

Gets a value that indicates whether the current element has any child elements.

(Inherited from OpenXmlLeafElement)
InnerText InnerText InnerText

Gets the concatenated values of the node and all of its children.

(Inherited from OpenXmlElement)
InnerXml InnerXml InnerXml

Gets or sets the markup that only represents child elements of the current element.

(Inherited from OpenXmlLeafElement)
LastChild LastChild LastChild

Gets the last child of the OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no such OpenXmlElement element.

(Inherited from OpenXmlElement)
LocalName LocalName LocalName

Gets the local name of the element.

MCAttributes MCAttributes MCAttributes

Sets the markup compatibility attributes. Returns null if no markup compatibility attributes are defined for the current element.

(Inherited from OpenXmlElement)
NamespaceDeclarations NamespaceDeclarations NamespaceDeclarations

Gets all the namespace declarations defined in the current element. Returns an empty enumerator if there is no namespace declaration.

(Inherited from OpenXmlElement)
NamespaceUri NamespaceUri NamespaceUri

Gets the namespace URI of the current element.

(Inherited from OpenXmlElement)
OpenXmlElementContext OpenXmlElementContext OpenXmlElementContext

Gets the OpenXmlEementContext of the current element.

(Inherited from OpenXmlElement)
OuterXml OuterXml OuterXml

Gets the markup that represents the current element and all of its child elements.

(Inherited from OpenXmlElement)
Parent Parent Parent

Gets the parent element of the current element.

(Inherited from OpenXmlElement)
Prefix Prefix Prefix

Gets the namespace prefix of current element.

(Inherited from OpenXmlElement)
Val Val Val

On/Off Value.Represents the following attribute in the schema: w:val

(Inherited from OnOffType)
XmlQualifiedName XmlQualifiedName XmlQualifiedName

Gets the qualified name of the current element.

(Inherited from OpenXmlElement)
XName XName XName

Gets the qualified name of the current element.

(Inherited from OpenXmlElement)

Methods

AddAnnotation(Object) AddAnnotation(Object) AddAnnotation(Object)

Adds an object to the current OpenXmlElement element's list of annotations.

(Inherited from OpenXmlElement)
AddNamespaceDeclaration(String, String) AddNamespaceDeclaration(String, String) AddNamespaceDeclaration(String, String)

Adds a namepace declaration to the current node.

(Inherited from OpenXmlElement)
Ancestors() Ancestors() Ancestors()

Enumerates all of the current element's ancestors.

(Inherited from OpenXmlElement)
Ancestors<T>() Ancestors<T>() Ancestors<T>()

Enumerates only the current element's ancestors that have the specified type.

(Inherited from OpenXmlElement)
Annotation(Type) Annotation(Type) Annotation(Type)

Get the first annotation object of the specified type from the current OpenXmlElement element.

(Inherited from OpenXmlElement)
Annotation<T>() Annotation<T>() Annotation<T>()

Get the first annotation object of the specified type from the current OpenXmlElement element.

(Inherited from OpenXmlElement)
Annotations(Type) Annotations(Type) Annotations(Type)

Gets a collection of annotations with the specified type for the current OpenXmlElement element.

(Inherited from OpenXmlElement)
Annotations<T>() Annotations<T>() Annotations<T>()

Gets a collection of annotations with the specified type for the current OpenXmlElement element.

(Inherited from OpenXmlElement)
Append(IEnumerable<OpenXmlElement>) Append(IEnumerable<OpenXmlElement>) Append(IEnumerable<OpenXmlElement>)

Appends each element from a list of elements to the end of the current element's list of child elements.

(Inherited from OpenXmlElement)
Append(OpenXmlElement[]) Append(OpenXmlElement[]) Append(OpenXmlElement[])

Appends each element from an array of elements to the end of the current element's list of child elements.

(Inherited from OpenXmlElement)
AppendChild<T>(T) AppendChild<T>(T) AppendChild<T>(T)

Appends the specified element to the end of the current element's list of child nodes.

(Inherited from OpenXmlElement)
ClearAllAttributes() ClearAllAttributes() ClearAllAttributes()

Clears all of the attributes, including both known attributes and extended attributes.

(Inherited from OpenXmlElement)
Clone() Clone() Clone()

Creates a duplicate of the current node.

(Inherited from OpenXmlElement)
CloneNode(Boolean) CloneNode(Boolean) CloneNode(Boolean)

Creates a duplicate of this node.

Descendants() Descendants() Descendants()

Enumerates all of the current element's descendants.

(Inherited from OpenXmlElement)
Descendants<T>() Descendants<T>() Descendants<T>()

Enumerate all of the current element's descendants of type T.

(Inherited from OpenXmlElement)
Elements() Elements() Elements()

Enumerates all of the current element's children.

(Inherited from OpenXmlElement)
Elements<T>() Elements<T>() Elements<T>()

Enumerates only the current element's children that have the specified type.

(Inherited from OpenXmlElement)
ElementsAfter() ElementsAfter() ElementsAfter()

Enumerates all of the sibling elements that follow the current element and have the same parent as the current element.

(Inherited from OpenXmlElement)
ElementsBefore() ElementsBefore() ElementsBefore()

Enumerates all of the sibling elements that precede the current element and have the same parent as the current element.

(Inherited from OpenXmlElement)
GetAttribute(String, String) GetAttribute(String, String) GetAttribute(String, String)

Gets an Open XML attribute with the specified tag name and namespace URI.

(Inherited from OpenXmlElement)
GetAttributes() GetAttributes() GetAttributes()

Gets a list that contains a copy of all the attributes.

(Inherited from OpenXmlElement)
GetEnumerator() GetEnumerator() GetEnumerator()

Returns an enumerator that iterates through the child collection.

(Inherited from OpenXmlElement)
GetFirstChild<T>() GetFirstChild<T>() GetFirstChild<T>()

Finds the first child element in type T.

(Inherited from OpenXmlElement)
InsertAfter<T>(T, OpenXmlElement) InsertAfter<T>(T, OpenXmlElement) InsertAfter<T>(T, OpenXmlElement)

Inserts the specified element immediately after the specified reference element.

(Inherited from OpenXmlElement)
InsertAfterSelf<T>(T) InsertAfterSelf<T>(T) InsertAfterSelf<T>(T)

Inserts the specified element immediately after the current element.

(Inherited from OpenXmlElement)
InsertAt<T>(T, Int32) InsertAt<T>(T, Int32) InsertAt<T>(T, Int32)

Inserts the specified element at the specified index in the current element's list of child elements.

(Inherited from OpenXmlElement)
InsertBefore<T>(T, OpenXmlElement) InsertBefore<T>(T, OpenXmlElement) InsertBefore<T>(T, OpenXmlElement)

Inserts the specified element immediately before the specified reference element.

(Inherited from OpenXmlElement)
InsertBeforeSelf<T>(T) InsertBeforeSelf<T>(T) InsertBeforeSelf<T>(T)

Inserts the specified element immediately before the current element.

(Inherited from OpenXmlElement)
IsAfter(OpenXmlElement) IsAfter(OpenXmlElement) IsAfter(OpenXmlElement)

Determines if the current element appears after a specified element in document order.

(Inherited from OpenXmlElement)
IsBefore(OpenXmlElement) IsBefore(OpenXmlElement) IsBefore(OpenXmlElement)

Determines if the current element appears before a specified element in document order.

(Inherited from OpenXmlElement)
LookupNamespace(String) LookupNamespace(String) LookupNamespace(String)

Resolves the namespace prefix in the context of the current node.

(Inherited from OpenXmlElement)
LookupPrefix(String) LookupPrefix(String) LookupPrefix(String)

Finds the corresponding prefix for a namespace uri in the current element scope.

(Inherited from OpenXmlElement)
NextSibling() NextSibling() NextSibling()

Gets the OpenXmlElement element that immediately follows the current OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no next OpenXmlElement element.

(Inherited from OpenXmlElement)
NextSibling<T>() NextSibling<T>() NextSibling<T>()

Gets the OpenXmlElement element with the specified type that follows the current OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no next OpenXmlElement.

(Inherited from OpenXmlElement)
PrependChild<T>(T) PrependChild<T>(T) PrependChild<T>(T)

Inserts the specified element at the beginning of the current element's list of child elements.

(Inherited from OpenXmlElement)
PreviousSibling() PreviousSibling() PreviousSibling()

Gets the OpenXmlElement element that immediately precedes the current OpenXmlElement element. Returns null (Nothing in Visual Basic ) if there is no preceding OpenXmlElement element.

(Inherited from OpenXmlElement)
PreviousSibling<T>() PreviousSibling<T>() PreviousSibling<T>()

Gets the OpenXmlElement element with the specified type that precedes the current OpenXmlElement. Returns null (Nothing in Visual Basic) if there is no preceding OpenXmlElement element.

(Inherited from OpenXmlElement)
Remove() Remove() Remove()

Removes the current element from its parent.

(Inherited from OpenXmlElement)
RemoveAllChildren() RemoveAllChildren() RemoveAllChildren()

Removes all child elements of the current element.

(Inherited from OpenXmlLeafElement)
RemoveAllChildren<T>() RemoveAllChildren<T>() RemoveAllChildren<T>()

Remove all of the current element's child elements that are of type T.

(Inherited from OpenXmlElement)
RemoveAnnotations(Type) RemoveAnnotations(Type) RemoveAnnotations(Type)

Removes the annotations of the specified type from the current OpenXmlElement element.

(Inherited from OpenXmlElement)
RemoveAnnotations<T>() RemoveAnnotations<T>() RemoveAnnotations<T>()

Removes the annotations with the specified type from the current OpenXmlElement element.

(Inherited from OpenXmlElement)
RemoveAttribute(String, String) RemoveAttribute(String, String) RemoveAttribute(String, String)

Removes the attribute from the current element.

(Inherited from OpenXmlElement)
RemoveChild<T>(T) RemoveChild<T>(T) RemoveChild<T>(T)

Removes the specified child element from the current element's list of child elements.

(Inherited from OpenXmlElement)
RemoveNamespaceDeclaration(String) RemoveNamespaceDeclaration(String) RemoveNamespaceDeclaration(String)

Removes the namespace declaration for the specified prefix. Removes nothing if there is no prefix.

(Inherited from OpenXmlElement)
ReplaceChild<T>(OpenXmlElement, T) ReplaceChild<T>(OpenXmlElement, T) ReplaceChild<T>(OpenXmlElement, T)

Replaces a child element with another child element in the current element's list of child elements.

(Inherited from OpenXmlElement)
SetAttribute(OpenXmlAttribute) SetAttribute(OpenXmlAttribute) SetAttribute(OpenXmlAttribute)

Sets an attribute to the specified element. If the attribute is a known attribute, the value of the attribute is set. If the attribute is an extended attribute, the 'openxmlAttribute' is added to the extended attributes list.

(Inherited from OpenXmlElement)
SetAttributes(IEnumerable<OpenXmlAttribute>) SetAttributes(IEnumerable<OpenXmlAttribute>) SetAttributes(IEnumerable<OpenXmlAttribute>)

Sets a number of attributes to the element. If an attribute is a known attribute, the value of the attribute is set. If an attribute is an extended attribute, the 'openxmlAttribute' is added to the extended attributes list.

(Inherited from OpenXmlElement)
WriteTo(XmlWriter) WriteTo(XmlWriter) WriteTo(XmlWriter)

Saves the current node to the specified XmlWriter.

(Inherited from OpenXmlElement)

Explicit Interface Implementations

IEnumerable.GetEnumerator() IEnumerable.GetEnumerator() IEnumerable.GetEnumerator() Inherited from OpenXmlElement

Applies to