Administrator audit logging
Applies to: Exchange Server 2013
You can use administrator audit logging in Microsoft Exchange Server 2013 to log when a user or administrator makes a change in your organization. By keeping a log of the changes, you can trace changes to the person who made the change, augment your change logs with detailed records of the change as it was implemented, comply with regulatory requirements and requests for discovery, and more.
By default, audit logging is enabled in new installations of Exchange 2013.
What gets audited
Cmdlets that are run directly in the Exchange Management Shell are audited. In addition, operations performed using the Exchange admin center (EAC) are also logged because those operations run cmdlets in the background.
Cmdlets, regardless of where they're run, are audited if a cmdlet is on the cmdlet auditing list and one or more parameters on that cmdlet are on the parameter auditing list. Audit logging is intended to show what actions have been taken to modify objects in an Exchange organization rather than what objects have been viewed.
A cmdlet might not be logged if an error occurs before the cmdlet calls the Admin Audit Log cmdlet extension agent. If an error occurs after the Admin Audit Log agent is called, the cmdlet is logged along with the associated error. For more information, see the Admin Audit Log Agent section later in this topic.
Changes made using Microsoft Exchange Server 2010 management tools are logged; however, changes using Microsoft Exchange Server 2007 management tools aren't logged.
Changes to the audit log configuration are refreshed every 60 minutes on computers that have the Shell open at the time a configuration change is made. If you want to apply the changes immediately, close and then open the Shell again on each computer.
A command may take up to 15 minutes after it's run to appear in audit log search results. This is because audit log entries must be indexed before they can be searched. If a command doesn't appear in the administrator audit log, wait a few minutes and run the search again.
Audit logging configuration
By default, if audit logging is enabled, a log entry is created every time any cmdlet is run. If you don't want to audit every cmdlet that's run, you can configure audit logging to audit only the cmdlets and parameters you're interested in. You configure audit logging with the Set-AdminAuditLogConfig cmdlet. The parameters referenced in the following sections are used with this cmdlet.
Changes to the administrator audit log configuration are always logged, regardless of whether the Set-AdministratorAuditLog cmdlet is included in the list of cmdlets being audited and whether audit logging is enabled or disabled.
When a command is run, Exchange inspects the cmdlet that was used. If the cmdlet that was run matches any of the cmdlets provided with the AdminAuditLogConfigCmdlets parameter, Exchange then checks the parameters specified in the AdminAuditLogConfigParameters parameter. If at least one or more parameters from the parameters list are matched, Exchange logs the cmdlet that was run in the mailbox specified using the AdminAuditLogMailbox parameter. The following sections contain more information about each aspect of the audit logging configuration.
For more information about managing audit logging configuration, see Manage administrator audit logging.
You can control which cmdlets are audited by providing a list of cmdlets, and their parameters, that you want to log. When you configure audit logging, you can specify to audit every cmdlet, or you can specify the cmdlets you want to audit by using the AdminAuditLogConfigCmdlets parameter. You can specify full cmdlet names, such as New-Mailbox, or you can specify partial cmdlet names and enclose those names in wildcard characters, such as an asterisk (
*). For example, if you want to log when any cmdlet that contains the string
Transport runs, you can specify a value of
*Transport*. You can use a mix of full cmdlet names and partial cmdlet names at the same time to tailor the audit logging configuration to your needs.
In addition to specifying which cmdlets you want to log, you can also indicate that cmdlets should only be logged if certain parameters on those cmdlets are used. Use the AdminAuditLogConfigParameters parameter to specify which parameters should be logged. As with cmdlets, you can specify full parameter names, such as
Database, or partial parameter names enclosed in wildcard characters (
*), such as
*Address*, or a combination of both.
Audit log age limit
By default, audit logging is configured to store audit log entries for 90 days. After 90 days, the audit log entry is deleted. You can change the audit log age limit using the AdminAuditLogAgeLimit parameter. You can specify the number of days, hours, minutes, and seconds that audit log entries should be kept. To specify a value, use the format
dd.hh:mm:ss where the following applies:
dd: The number of days to keep the audit log entry.
hh: The number of hours to keep the audit log entry.
mm: The number of minutes to keep the audit log entry.
ss: The number of seconds to keep the audit log entry.
You must specify multiple years using the
dd field. For example, 365 days equals one year; 730 days equals two years; 913 days equals two years and six months. For example, to set the audit log age limit to two years and six months, use the syntax
You can set the audit log age limit to a value that's less than the current age limit. If you do this, any audit log entry whose age exceeds the new age limit is deleted.
If you set the age limit to 0, Exchange deletes all the entries in the audit log.
We recommend that you grant permissions to configure the audit log age limit only to highly trusted users.
By default, the administrator audit log records only the cmdlet name, cmdlet parameters (and values specified), the object that was modified, who ran the cmdlet, when the cmdlet was run, and on what server the cmdlet was run. The administrator audit log doesn't log what properties were modified on the object. If you want the audit log to also include the properties of the object that were modified, you can enable verbose logging by setting the LogLevel parameter to
Verbose. When you enable verbose logging, in addition to the information logged by default, the properties modified on an object, including their old and new values, are included in the audit log.
Cmdlets that begin with the verb Test aren't logged by default. You can indicate that Test cmdlets should be logged by setting the TestCmdletLoggingEnabled parameter to
$true. Although you can enable logging of test cmdlets, we recommend that you do this only for short periods of time because test cmdlets can produce a large amount of information.
Each time a cmdlet is logged, an audit log entry is created. Audit logs are stored in a hidden, dedicated arbitration mailbox that can only be accessed using the EAC or the Search-AdminAuditLog or New-AdminAuditLogSearch cmdlet. It can't be opened using Microsoft Outlook Web App or Microsoft Outlook. The following sections provide information about the following:
What's included in the logs
Reports available on the EAC auditing page
Audit log search cmdlets
Audit log contents
Each audit log entry contains the information described in the following table. The audit log contains one or more audit log entries. The number of audit log entries is controlled by the audit log age limit specified using the Set-AdminAuditLogConfig cmdlet. Any audit log entry that exceeds the age limit is deleted.
Audit log entry fields
This field is used internally by Exchange.
This field contains the object that was modified by the cmdlet specified in the
This field contains the name of the cmdlet that was run by the user in the
This field contains the parameters that were specified when the cmdlet in the
This field contains the properties that were modified on the object in the
This field is only populated if the LogLevel parameter on the Set-AdminAuditLogConfig cmdlet is set to
This field contains the user account of the user who ran the cmdlet in the
This field specifies whether the cmdlet in the
This field contains the error message generated if the cmdlet in the
This field contains the date and time when the cmdlet in the
This field indicates the server on which the cmdlet specified in the
This field is used internally by Exchange.
This field is used internally by Exchange.
This field is used internally by Exchange.
EAC auditing reports
The auditing page in the EAC has several reports that provide information about various types of compliance and administrative configuration changes. The following reports provide information about configuration changes in your organization:
Administrator role group report: This report enables you to search for changes to management role groups that you specify within a specified timeframe. The results that are returned include the role groups that have been changed, who changed them and when, and what changes were made. A maximum of 3,000 entries can be returned. If your search might return more than 3,000 entries, use the Administrator audit log report or the Search-AdminAuditLog cmdlet.
Administrator audit log: This report enables you to export the audit log entries recorded within a specified timeframe to a XML file and then send the file via email to a recipient you specify. For more information about the contents of the XML file, see Administrator audit log structure.
For information about how to use these reports, see Search the role group changes or administrator audit logs.
For information about the other reports included on the auditing page see Exchange auditing reports.
When you run the Search-AdminAuditLog cmdlet, all the audit log entries that match the search criteria you specify are returned. You can specify the following search criteria:
Cmdlets: Specifies the cmdlets you want to search for in the administrator audit log.
Parameters: Specifies the parameters, separated by commas, you want to search for in the administrator audit log. You can only search for parameters if you specify a cmdlet to search for.
End date: Scopes the administrator audit log results to log entries that occurred on or before the specified date.
Start date: Scopes the administrator audit log results to log entries that occurred on or after the specified date.
Object IDs: Specifies that only administrator audit log entries that contain the specified changed objects should be returned
User IDs: Specifies that only the administrator audit log entries that contain the specified IDs of the user who ran the cmdlet should be returned.
Successful completion: Specifies whether only administrator audit log entries that indicated a success or failure should be returned.
Each audit log entry returned contains the information described in the table in Audit Log Contents. By default, only the first 1,000 log entries that match the criteria you specify are returned. However, you can override this default and return more or fewer entries using the ResultSize parameter. You can specify a value of
Unlimited with the ResultSize parameter to return all log entries that match the specified criteria.
For information about how to use the Search-AdminAuditLog cmdlet, see Search the role group changes or administrator audit logs.
The New-AdminAuditLogSearch cmdlet searches the audit log just like the Search-AdminAuditLog cmdlet. However, instead of displaying the results of the audit log search in the Shell, the New-AdminAuditLogSearch cmdlet performs the search and then sends the results of the search to a recipient you specify via an email message. The results are included as an XML attachment to the email message.
You can use the same search criteria with the New-AdminAuditLogSearch cmdlet that's used on the Search-AdminAuditLog cmdlet. For a list of the search criteria, see Search-AdminAuditLog Cmdlet.
After you run the New-AdminAuditLogSearch cmdlet, Exchange may take up to 15 minutes to deliver the report to the specified recipient. The XML file attached report can be a maximum of 10 megabytes (MB). The XML file contains the same information described in the table in Audit Log Contents. For more information about the structure of the XML file, see Administrator audit log structure.
Outlook Web App doesn't allow you to open XML attachments by default. You can either configure Exchange to allow XML attachments to be viewed using Outlook Web App, or you can use another email client, such as Microsoft Outlook, to view the attachment. For information about how to configure Outlook Web App to allow you to view an XML attachment, see View or configure Outlook Web App virtual directories.
For information about how to use the New-AdminAuditLogSearch cmdlet, see Search the role group changes or administrator audit logs.
Manual audit log entries
In addition to logging Exchange cmdlets when they're run, Exchange 2013 enables you to manually write log entries to the audit log. Exchange 2013 supports this using the Write-AdminAuditLog cmdlet. Situations where you might want to add a manual log entry include the following:
Custom script entry and exit
Change control information
Maintenance start and end times
With the Write-AdminAuditLog cmdlet, you specify a string of text to include in the audit log using the Comment parameter. The Comment parameter accepts an alphanumeric string up to 500 characters. Included in the manual audit log entry along with the comment string is all of the same information captured when an Exchange cmdlet is logged. For a description of each field included in the audit log, see the table in Audit Log Contents.
You can retrieve manual audit log entries the same way as any other log entry, using the EAC auditing page or using the Search-AdminAuditLog or New-AdminAuditLogSearch cmdlets.
To view the contents of the Comment parameter on the Write-AdminAuditLog cmdlet in a manual audit log entry, see Search the role group changes or administrator audit logs.
Active Directory replication
Administrator audit logging relies on Active Directory replication to replicate the configuration settings you specify to the domain controllers in your organization. Depending on your replication settings, the changes you make may not be immediately applied to all servers running Exchange 2013 or Exchange 2010 in your organization.
Admin Audit Log agent
The Admin Audit Log built-in cmdlet extension agent performs administrator audit logging of cmdlet operations in Exchange 2013. This agent reads the audit log configuration and then performs an evaluation of each cmdlet run in your organization. If the criteria you've specified in the audit log configuration matches the cmdlet that's being run, the agent generates an audit log.
The Admin Audit Log agent is enabled by default, which is required for audit logging to function. It can't be disabled, and its priority can't be changed. For more information about cmdlet extension agents, see Cmdlet extension agents.