2.2.1.27 MS-RDG-Device-Redirection
MS-RDG-Device-Redirection is a VSA specifying filters used by a Remote Desktop Gateway (RDG) server, as specified in section 2.2.1.
The fields of MS-RDG-Device-Redirection MUST be set as follows:
Vendor-Type: An 8-bit unsigned integer that MUST be set to 0x3F.
Vendor-Length: An 8-bit unsigned integer that MUST be set to 6.
Attribute-Specific Value: A 32-bit unsigned integer in network-byte order (bit 0 is the least significant bit) in which the bits MUST have following meaning.
Bit |
Meaning |
---|---|
0 |
Drives redirection (0: enabled, 1: disabled) |
1 |
Printers redirection (0: enabled, 1: disabled) |
2 |
Serial ports redirection (0: enabled, 1: disabled) |
3 |
Clipboard redirection (0: enabled, 1: disabled) |
4 |
Plug and play devices redirection (0: enabled, 1: disabled) |
5-28 |
<Reserved for additional devices> |
29 |
1: Disable redirection for all devices 0: Device redirection is controlled by bits 0..4 |
30 |
1: Enable redirection for all devices 0: Device redirection is controlled, first, by bit 29 and then by bits 0..4 |
31 |
<Unused> |
When either bit 29 or bit 30 is set to 1, the values for bits 0..4 are ignored.