2.7.1.1.1 Tables
CEA Resolutions and Refresh Rates with Extension
The following table specifies additional CEA (Consumer Electronics Association) resolutions and refresh rates, other than the CEA resolutions and refresh rates as specified in [WF-DTS2.1] section 5.1.5.1.
|
Bits |
Index |
Interpretation |
Reference |
|---|---|---|---|
|
16:0 |
- |
|
As specified in [WF-DTS2.1] section 5.1.5.1 |
|
17 |
17 |
3840x2160 p30 |
As specified in [CEA-861-F] section 4 |
|
18 |
18 |
3840x2160 p60 |
As specified in [CEA-861-F] section 4 |
|
19 |
19 |
4096x2160 p30 |
As specified in [CEA-861-F] section 4 |
|
20 |
20 |
4096x2160 p60 |
As specified in [CEA-861-F] section 4 |
|
21 |
21 |
3840x2160 p25 |
As specified in [CEA-861-F] section 4 |
|
22 |
22 |
3840x2160 p50 |
As specified in [CEA-861-F] section 4 |
|
23 |
23 |
4096x2160 p25 |
As specified in [CEA-861-F] section 4 |
|
24 |
24 |
4096x2160 p50 |
As specified in [CEA-861-F] section 4 |
|
25 |
25 |
3840x2160 p24 |
As specified in [CEA-861-F] section 4 |
|
26 |
26 |
4096x2160 p24 |
As specified in [CEA-861-F] section 4 |
|
39:27 |
- |
Reserved |
|
The Wi-Fi Display Sink SHOULD use the timings of the corresponding display device. For example, if a monitor is using CEA timings, then CEA-861-F timings apply as specified in [CEA-861-F] section 4. If a monitor is using VESA timings, then, VESA CVT timings apply as specified in [VESA-CVT] section 4, even if the entry originated from the CEA table.
VESA Resolutions and Refresh Rates with Extension
The following table specifies additional VESA resolutions and refresh rates, other than the VESA resolutions and refresh rates as specified in [WF-DTS2.1] section 5.1.5.2.
|
Bits |
Index |
Interpretation |
Reference |
|---|---|---|---|
|
28:0 |
- |
|
As specified in [WF-DTS2.1] section 5.1.5.2 |
|
29 |
29 |
2560x1440 p30 (WQHD) |
As specified in [VESA-CVT] section 4 |
|
30 |
30 |
2560x1440 p60 (WQHD) |
As specified in [VESA-CVT] section 4 |
|
31 |
31 |
2560x1600 p30 (WQXGA) |
As specified in [VESA-CVT] section 4 |
|
32 |
32 |
2560x1600 p60 (WQXGA) |
As specified in [VESA-CVT] section 4 |
|
39:33 |
- |
Reserved |
|
Entries from Table 5-10.1 (CEA) are not duplicated in Table 5-11.1 (VESA). In order to use a CEA entry for a VESA monitor, VESA CVT timings are used instead of CEA timings.
All entries use DMT timings (if defined in VESA DMT); otherwise, the CVT-computed value for timings is used.
Display Native Resolution Refresh Rates with Extension
The following table specifies additional display native resolution refresh rates, other than the Display native resolution refresh rates as specified in [WF-DTS2.1] section 5.1.5.4.
|
Bits |
Index |
Interpretation |
|---|---|---|
|
2:0 |
Table Selection bits |
0b010 – 0b000: As specified in [WF-DTS2.1] section 5.1.5.4 |
|
8:3 |
- |
Index into resolution/refresh rate table selected by [B2:B0] (twice the size specified in [WF-DTS2.1]) |
|
15:9 |
Reserved |
Reserved |
Profiles Bitmap with Extension
The following table specifies additional Profiles Bitmap, other than the Profiles Bitmap as specified in [WF-DTS2.1] section 5.1.5.5.
|
Bits |
Name |
Interpretation |
|---|---|---|
|
0 |
H.264 Constrained Baseline Profile |
As specified in [WF-DTS2.1] section 5.1.5.5 |
|
1 |
H.264 Constrained High Profile |
As specified in [WF-DTS2.1] section 5.1.5.5 |
|
2 |
H.265 Version 1 Main Profile (8-bit 4:2:0) |
0=unsupported, 1=supported |
|
3 |
H.265 Version 1 Main 10 Profile (10bit 4:2:0) |
0=unsupported, 1=supported |
|
15:4 |
Reserved |
Reserved |
All entries in the previous table MUST NOT use the B slice tool and MUST NOT use the CABAC entropy coding tool, as specified in [WF-DTS2.1] section 3.4.2.
Levels Bitmap with Extension
The following table specifies additional Levels Bitmap, other than the Levels Bitmap as specified in [WF-DTS2.1] section 5.1.5.6.
|
Bits |
Name |
Interpretation |
|---|---|---|
|
0 |
Level 3.1 bit |
0b0: Level 3.1 not supported 0b1: Level 3.1 supported |
|
1 |
Level 3.2 bit |
0b0: Level 3.2 not supported 0b1: Level 3.2 supported |
|
2 |
Level 4 bit |
0b0: Level 4 not supported 0b1: Level 4 supported |
|
3 |
Level 4.1 bit |
0b0: Level 4.1 not supported 0b1: Level 4.1 supported |
|
4 |
Level 4.2 bit |
0b0: Level 4.2 not supported 0b1: Level 4.2 supported |
|
5 |
Level 5 bit |
0b0: Level 5 not supported 0b1: Level 5 supported |
|
6 |
Level 5.1 bit |
0b0: Level 5.1 not supported 0b1: Level 5.1 supported |
|
7 |
Level 5.2 bit |
0b0: Level 5.2 not supported 0b1: Level 5.2 supported |
|
15:8 |
Reserved |
Reserved |