Set-CMTSStepEnableBitLocker

Configure the Enable BitLocker step in a task sequence, to enable BitLocker encryption on the hard drive.

Syntax

Set-CMTSStepEnableBitLocker
   [-CreateKeyOption <CreateKeyType>]
   [-Drive <String>]
   [-EnableSkipWhenNoValidTpm <Boolean>]
   [-EncryptionMethod <DiskEncryptionMethod>]
   [-IsEncryptFullDisk <Boolean>]
   [-IsWaitingForBitLockerComplete <Boolean>]
   [-Pin <SecureString>]
   [-TpmAndPin]
   [-TpmAndUsb]
   [-TpmOnly]
   [-UsbOnly]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   -InputObject <IResultObject>
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-CreateKeyOption <CreateKeyType>]
   [-Drive <String>]
   [-EnableSkipWhenNoValidTpm <Boolean>]
   [-EncryptionMethod <DiskEncryptionMethod>]
   [-IsEncryptFullDisk <Boolean>]
   [-IsWaitingForBitLockerComplete <Boolean>]
   [-Pin <SecureString>]
   [-TpmAndPin]
   [-TpmAndUsb]
   [-TpmOnly]
   [-UsbOnly]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-CreateKeyOption <CreateKeyType>]
   [-Drive <String>]
   [-EnableSkipWhenNoValidTpm <Boolean>]
   [-EncryptionMethod <DiskEncryptionMethod>]
   [-IsEncryptFullDisk <Boolean>]
   [-IsWaitingForBitLockerComplete <Boolean>]
   [-Pin <SecureString>]
   [-TpmAndPin]
   [-TpmAndUsb]
   [-TpmOnly]
   [-UsbOnly]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-Condition <IResultObject[]>]
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-Condition <IResultObject[]>]
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-Condition <IResultObject[]>]
   -InputObject <IResultObject>
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   -InputObject <IResultObject>
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   [-SetConditionFile]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   [-SetConditionFile]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   -InputObject <IResultObject>
   [-SetConditionFile]
   [-StepName <String>]
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   [-SetConditionFolder]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   [-SetConditionFolder]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   -InputObject <IResultObject>
   [-SetConditionFolder]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   -InputObject <IResultObject>
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   -InputObject <IResultObject>
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   -InputObject <IResultObject>
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   -InputObject <IResultObject>
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepEnableBitLocker
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

Configure the Enable BitLocker step in a task sequence, to enable BitLocker encryption on the hard drive. For more information on this task sequence step, see About task sequence steps.

Note

Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.

Examples

Example 1

{{ Add example description here }}

{{ Add example code here }}

Parameters

-AddCondition

Specify a condition object to add to this step.

Type:IResultObject[]
Aliases:AddConditions
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-ClearCondition

Remove a condition from this step. Use the -Condition parameter to specify the condition to remove.

Type:SwitchParameter
Aliases:ClearConditions
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-Condition

Specify a condition object to use with this step.

Type:IResultObject[]
Aliases:SubCondition, SubConditions
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-ConditionVariableName

Specify the name of the task sequence variable to use as a condition.

Type:String
Aliases:Variable
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-ConditionVariableValue

Specify the value of the task sequence variable to use in a condition.

Type:String
Aliases:Value
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-CreateKeyOption

Use one of the following values to specify where to create the recovery key:

  • ActiveDirectoryDomainServices: Create the recovery password and escrow it in Active Directory (recommended)
  • DoNotCreateRecoveryKey: Encrypt the drive, but don't create a recovery password.
Type:CreateKeyType
Accepted values:ActiveDirectoryDomainServices, DoNotCreateRecoveryKey
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-Description

Specify an optional description for this task sequence step.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-DisableWildcardHandling

This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-Drive

Specify the drive to encrypt.

Type:String
Aliases:SpecificDrive
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-EnableSkipWhenNoValidTpm

Applies to version 2006 and later. Set this parameter to true to skip this step for computers that don't have a TPM or when the TPM isn't enabled.

Type:Boolean
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-EncryptionMethod

Applies to version 2006 and later. Use this parameter to specify the disk encryption mode. By default or if not specified, the step continues to use the default encryption method for the OS version.

Type:DiskEncryptionMethod
Aliases:DiskEncryptionMethod
Accepted values:DoNotSpecify, AES_128, AES_256, XTS_AES128, XTS_AES256, TotalCount
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-FileDateTimeOperator

Specify a variable operator type for a file date/time condition.

Type:VariableOperatorType
Accepted values:Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-FilePath

Specify the path for a file condition.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-FileTimestamp

Specify a date/time value to use for a file condition.

Type:DateTime
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-FileVersion

Specify a version string for a file condition.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-FolderDateTimeOperator

Specify a variable operator for a folder date/time condition.

Type:VariableOperatorType
Accepted values:Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-FolderPath

Specify the path for a folder condition.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-FolderTimestamp

Specify a date/time value to use for a folder condition.

Type:DateTime
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-ForceWildcardHandling

This parameter processes wildcard characters and may lead to unexpected behavior (not recommended). You can't combine it with DisableWildcardHandling.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-InputObject

{{ Fill InputObject Description }}

Type:IResultObject
Aliases:TaskSequence
Position:Named
Default value:None
Accept pipeline input:True
Accept wildcard characters:False
-IsAnyVersion

{{ Fill IsAnyVersion Description }}

Type:Boolean
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-IsContinueOnError

Use this parameter to enable the step option Continue on error. When you enable this option, if the step fails, the task sequence continues.

Type:Boolean
Aliases:IsThisStepContinueOnError
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-IsEnabled

Use this parameter to enable this task sequence step.

Type:Boolean
Aliases:IsThisStepEnabled
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-IsEncryptFullDisk

Starting in version 1906, use this parameter to set the following option on the Enable BitLocker task sequence step: Use full disk encryption.

Type:Boolean
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-IsWaitingForBitLockerComplete

Use this parameter to configure the step to wait for BitLocker to complete the drive encryption process on all drives before continuing task sequence execution.

Type:Boolean
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-MoveToIndex

Move this step to the specified index position in the task sequence.

Type:Int32
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-MsiFilePath

Specify the path to a Windows Installer file for an software condition.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-Namespace

Specify the namespace for a WMI query condition.

Type:String[]
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-NewStepName

Use this parameter to rename this task sequence step.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-OperatorType

Specify an operator to use with a task sequence variable condition.

Type:VariableOperatorType
Accepted values:Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-Pin

If you use the parameter -TpmAndPin, use this parameter to specify the PIN value. Specify 4-20 integers.

Type:SecureString
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-Query

Specify a WMI query string to use for a condition.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-RegistryKey

Specify the key to use with a registry condition.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-RegistryOperator

Specify an operator to use with a registry condition.

Type:VariableOperatorType
Accepted values:Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-RegistryValueData

Specify the value data to use with a registry condition.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-RegistryValueName

Specify the value name to use with a registry condition.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-RemoveConditionFile

Use this parameter to remove a file condition.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-RemoveConditionFolder

Use this parameter to remove a folder condition.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-RemoveConditionIfStatement

Use this parameter to remove an if statement condition.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-RemoveConditionOperatingSystem

Use this parameter to remove an OS condition.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-RemoveConditionQueryWmi

Use this parameter to remove a WMI query condition.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-RemoveConditionRegistry

Use this parameter to remove a registry condition.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-RemoveConditionSoftware

Use this parameter to remove a software condition.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-RemoveConditionVariable

Use this parameter to remove a task sequence variable condition.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-RootKey

Specify the root key to use with a registry condition.

Type:RegistryRootKeyType
Accepted values:HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-SetConditionFile

Add a new file condition.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-SetConditionFolder

Add a new folder condition.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-SetConditionIfStatement

Add a new if statement condition.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-SetConditionOperatingSystem

Add a new OS condition.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-SetConditionQueryWmi

Add a new WMI query condition.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-SetConditionRegistry

Add a new registry condition.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-SetConditionSoftware

Add a new software condition.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-SetConditionVariable

Add a new task sequence variable condition.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-StatementType

Set the type for an if statement condition.

Type:ConditionStatementType
Aliases:Operator
Accepted values:All, Any, None
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-StepName

Specify the name of the step to select for changes.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-StepOrder

Use this parameter to reorder the step in the task sequence.

Type:ReorderType
Accepted values:MoveUp, MoveDown, MoveToIndex
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-SupportedPlatform

Use this parameter to specify the platforms for an OS condition.

Type:IResultObject[]
Aliases:SupportedPlatforms
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-TaskSequenceId

Specify the ID of the task sequence to target for changes.

Type:String
Aliases:Id, TaskSequencePackageId
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-TaskSequenceName

Specify the name of the task sequence to target for changes.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-TpmAndPin

Use this parameter to configure key management for the OS drive to use a TPM and a personal identification number (PIN). When you specify this option, BitLocker locks the normal boot process until the user provides the PIN. If you use this parameter, use -Pin to specify the PIN value. You can't combine this parameter with -TpmAndUsb, -TpmOnly, or -UsbOnly.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-TpmAndUsb

Use this parameter to configure key management for the OS drive to use a TPM and a startup key stored on a USB flash drive. When you select this option, BitLocker locks the normal boot process until a USB device that contains a BitLocker startup key is attached to the computer. You can't combine this parameter with -TpmAndPin, -TpmOnly, or -UsbOnly.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-TpmOnly

Use this parameter to configure key management for the OS drive to only use a TPM. You can't combine this parameter with -TpmAndPin, -TpmAndUsb, or -UsbOnly.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-UsbOnly

Use this parameter to configure key management for the OS drive to only use a startup key stored on a USB flash drive. When you select this option, BitLocker locks the normal boot process until a USB device that contains a BitLocker startup key is attached to the computer. You can't combine this parameter with -TpmAndPin, -TpmAndUsb, or -TpmOnly.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-ValueType

Specify the type of value for a registry condition.

Type:RegistryValueType
Accepted values:RegistrySZ, RegistryExpandSZ, RegistryDWord
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-VersionOperator

Specify an operator to use with a file condition.

Type:VariableOperatorType
Accepted values:Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-WhatIf

Shows what would happen if the cmdlet runs. It doesn't run the cmdlet.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False

Inputs

Microsoft.ConfigurationManagement.ManagementProvider.IResultObject

Outputs

System.Object