Set-ActiveSyncMailboxPolicy

This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other. Use the Set-ActiveSyncMailboxPolicy cmdlet to apply a variety of Mobile Device mailbox policy settings to a server. You can set any of the parameters by using one command. The Set-ActiveSyncMailboxPolicy cmdlet will be removed in a future version of Exchange. Use the Set-MobileMailboxPolicy cmdlet instead. If you have any scripts that use the Set-ActiveSyncMailboxPolicy cmdlet, update them to use the Set-MobileMailboxPolicy cmdlet. For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax (https://technet.microsoft.com/library/bb123552.aspx).

Syntax

Set-ActiveSyncMailboxPolicy
   [-Identity] <MailboxPolicyIdParameter>
   [-AllowBluetooth <Disable | HandsfreeOnly | Allow>]
   [-AllowBrowser <$true | $false>]
   [-AllowCamera <$true | $false>]
   [-AllowConsumerEmail <$true | $false>]
   [-AllowDesktopSync <$true | $false>]
   [-AllowExternalDeviceManagement <$true | $false>]
   [-AllowHTMLEmail <$true | $false>]
   [-AllowInternetSharing <$true | $false>]
   [-AllowIrDA <$true | $false>]
   [-AllowMobileOTAUpdate <$true | $false>]
   [-AllowNonProvisionableDevices <$true | $false>]
   [-AllowPOPIMAPEmail <$true | $false>]
   [-AllowRemoteDesktop <$true | $false>]
   [-AllowSimpleDevicePassword <$true | $false>]
   [-AllowSMIMEEncryptionAlgorithmNegotiation <BlockNegotiation | OnlyStrongAlgorithmNegotiation | AllowAnyAlgorithmNegotiation>]
   [-AllowSMIMESoftCerts <$true | $false>]
   [-AllowStorageCard <$true | $false>]
   [-AllowTextMessaging <$true | $false>]
   [-AllowUnsignedApplications <$true | $false>]
   [-AllowUnsignedInstallationPackages <$true | $false>]
   [-AllowWiFi <$true | $false>]
   [-AlphanumericDevicePasswordRequired <$true | $false>]
   [-ApprovedApplicationList <ApprovedApplicationCollection>]
   [-AttachmentsEnabled <$true | $false>]
   [-Confirm]
   [-DeviceEncryptionEnabled <$true | $false>]
   [-DevicePasswordEnabled <$true | $false>]
   [-DevicePasswordExpiration <Unlimited>]
   [-DevicePasswordHistory <Int32>]
   [-DevicePolicyRefreshInterval <Unlimited>]
   [-DomainController <Fqdn>]
   [-IrmEnabled <$true | $false>]
   [-IsDefaultPolicy <$true | $false>]
   [-MaxAttachmentSize <Unlimited>]
   [-MaxCalendarAgeFilter <All | TwoWeeks | OneMonth | ThreeMonths | SixMonths>]
   [-MaxDevicePasswordFailedAttempts <Unlimited>]
   [-MaxEmailAgeFilter <All | OneDay | ThreeDays | OneWeek | TwoWeeks | OneMonth>]
   [-MaxEmailBodyTruncationSize <Unlimited>]
   [-MaxEmailHTMLBodyTruncationSize <Unlimited>]
   [-MaxInactivityTimeDeviceLock <Unlimited>]
   [-MinDevicePasswordComplexCharacters <Int32>]
   [-MinDevicePasswordLength <Int32>]
   [-Name <String>]
   [-PasswordRecoveryEnabled <$true | $false>]
   [-RequireDeviceEncryption <$true | $false>]
   [-RequireEncryptedSMIMEMessages <$true | $false>]
   [-RequireEncryptionSMIMEAlgorithm <TripleDES | DES | RC2128bit | RC264bit | RC240bit>]
   [-RequireManualSyncWhenRoaming <$true | $false>]
   [-RequireSignedSMIMEAlgorithm <SHA1 | MD5>]
   [-RequireSignedSMIMEMessages <$true | $false>]
   [-RequireStorageCardEncryption <$true | $false>]
   [-UnapprovedInROMApplicationList <MultiValuedProperty>]
   [-UNCAccessEnabled <$true | $false>]
   [-WhatIf]
   [-WSSAccessEnabled <$true | $false>]
   [-AllowApplePushNotifications <$true | $false>]
   [-IsDefault <$true | $false>]
   [<CommonParameters>]

Description

With the Set-ActiveSyncMailboxPolicy cmdlet, you can set each parameter in a mailbox policy.

Some Microsoft Mobile Device mailbox policy settings require the mobile device to have specific built-in features that enforce these security and device management settings. If your organization allows all devices, you must set the AllowNonProvisionableDevices parameter to $true. This applies to devices that can't enforce all policy settings.

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet (https://technet.microsoft.com/library/mt432940.aspx).

Examples

-------------------------- Example 1 --------------------------

Set-ActiveSyncMailboxPolicy -Identity:SalesPolicy -DevicePasswordEnabled:$true -AlphanumericDevicePasswordRequired:$true -PasswordRecoveryEnabled:$true -AttachmentsEnabled:$true -MaxInactivityTimeDeviceLock:15:00 -IsDefault:$false

This example sets several policy settings for the Mobile Device mailbox policy SalesPolicy.

-------------------------- Example 2 --------------------------

Set-ActiveSyncMailboxPolicy -Identity:Management -DevicePasswordEnabled:$true -AlphanumericDevicePasswordRequired:$true -PasswordRecoveryEnabled:$true -AllowCamera:$true -AllowWiFi:$false -AllowStorageCard:$true -AllowPOPIMAPEmail:$false

This example sets several policy settings for the Mobile Device mailbox policy Management.

-------------------------- Example 3 --------------------------

Set-ActiveSyncMailboxPolicy -Identity:Default -DevicePasswordEnabled:$true -AlphanumericDevicePasswordRequired:$true -PasswordRecoveryEnabled:$true -MaxEmailAgeFilter:ThreeDays -AllowWiFi:$false -AllowStorageCard:$true -AllowPOPIMAPEmail:$false -IsDefault:$true -AllowTextMessaging:$true -Confirm:$true

This example sets several policy settings for the Mobile Device mailbox policy Default and requires confirmation before applying the settings.

Required Parameters

-Identity

The Identity parameter specifies the Mobile Device mailbox policy.

Type:MailboxPolicyIdParameter
Position:1
Default value:None
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online

Optional Parameters

-AllowApplePushNotifications

This parameter is available only in the cloud-based service.

The AllowApplePushNotifications parameter specifies whether push notifications are allowed to Apple mobile devices.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowBluetooth

The AllowBluetooth parameter specifies whether the Bluetooth capabilities are allowed on the mobile phone. The available options are Disable, HandsfreeOnly, and Allow. The default value is Allow.

Type:Disable | HandsfreeOnly | Allow
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowBrowser

The AllowBrowser parameter indicates whether Microsoft Pocket Internet Explorer is allowed on the mobile phone. The default value is $true. This parameter doesn't affect third-party browsers.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowCamera

The AllowCamera parameter specifies whether the mobile phone's camera is allowed. The default value is $true.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowConsumerEmail

The AllowConsumerEmail parameter specifies whether the mobile phone user can configure a personal email account on the mobile phone. The default value is $true. This parameter doesn't control access to emails using third-party mobile phone email programs.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowDesktopSync

The AllowDesktopSync parameter specifies whether the mobile phone can synchronize with a desktop computer through a cable. The default value is $true.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowExternalDeviceManagement

The AllowExternalDeviceManagement parameter specifies whether an external device management program is allowed to manage the mobile phone.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowHTMLEmail

The AllowHTMLEmail parameter specifies whether HTML email is enabled on the mobile phone. The default value is $true. If set to $false, all email is converted to plain text before synchronization occurs.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowInternetSharing

The AllowInternetSharing parameter specifies whether the mobile phone can be used as a modem to connect a computer to the Internet. The default value is $true.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowIrDA

The AllowIrDA parameter specifies whether infrared connections are allowed to the mobile phone. The default value is $true.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowMobileOTAUpdate

The AllowMobileOTAUpdate parameter specifies whether the Exchange ActiveSync mailbox policy can be sent to the mobile phone over a cellular data connection.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowNonProvisionableDevices

The AllowNonProvisionableDevices parameter specifies whether all mobile phones can synchronize with the server running Exchange. When set to $true, the AllowNonProvisionableDevices parameter enables all mobile phones to synchronize with the Exchange server, regardless of whether the phone can enforce all the specific settings established in the Mobile Device mailbox policy. This also includes mobile phones managed by a separate device management system. When set to $false, this parameter blocks mobile phones that aren't provisioned from synchronizing with the Exchange server. The default value is $false.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowPOPIMAPEmail

The AllowPOPIMAPEmail parameter specifies whether the user can configure a POP3 or IMAP4 email account on the mobile phone. The default value is $true. This parameter doesn't control access by third-party email programs.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowRemoteDesktop

The AllowRemoteDesktop parameter specifies whether the mobile phone can initiate a remote desktop connection. The default value is $true.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowSMIMEEncryptionAlgorithmNegotiation

The AllowSMIMEEncryptionAlgorithmNegotiation parameter specifies whether the messaging application on the mobile phone can negotiate the encryption algorithm if a recipient's certificate doesn't support the specified encryption algorithm.

Type:BlockNegotiation | OnlyStrongAlgorithmNegotiation | AllowAnyAlgorithmNegotiation
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowSMIMESoftCerts

The AllowSMIMESoftCerts parameter specifies whether S/MIME software certificates are allowed. The default value is $true.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowSimpleDevicePassword

The AllowSimpleDevicePassword parameter specifies whether a simple device password is allowed. A simple device password is a password that has a specific pattern, such as 1111 or 1234. The default value is $true.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowStorageCard

The AllowStorageCard parameter specifies whether the mobile phone can access information stored on a storage card. The default value is $true.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowTextMessaging

The AllowTextMessaging parameter specifies whether text messaging is allowed from the mobile phone. The default value is $true.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowUnsignedApplications

The AllowUnsignedApplications parameter specifies whether unsigned applications can be installed on the mobile phone. The default value is $true.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowUnsignedInstallationPackages

The AllowUnsignedInstallationPackages parameter specifies whether unsigned installation packages can be executed on the mobile phone. The default value is $true.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AllowWiFi

The AllowWiFi parameter specifies whether wireless Internet access is allowed on the mobile phone. The default value is $true.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AlphanumericDevicePasswordRequired

The AlphanumericDevicePasswordRequired parameter specifies whether the password for the mobile phone must be alphanumeric. The default value is $false.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-ApprovedApplicationList

The ApprovedApplicationList parameter specifies a list of approved applications for the mobile phone.

Type:ApprovedApplicationCollection
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-AttachmentsEnabled

The AttachmentsEnabled parameter specifies whether attachments can be downloaded. When set to $false, the AttachmentsEnabled parameter blocks the user from downloading attachments. The default value is $true.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.

  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-DeviceEncryptionEnabled

The DeviceEncryptionEnabled parameter specifies whether encryption is enabled. The DeviceEncryptionEnabled parameter, when set to $true, enables device encryption on the mobile phone. The default value is $false.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-DevicePasswordEnabled

The DevicePasswordEnabled parameter specifies whether a password is required. When set to $true, the DevicePasswordEnabled parameter requires that the user set a password for the mobile phone. The default value is $false.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-DevicePasswordExpiration

The DevicePasswordExpiration parameter specifies the length of time, in days, that a password can be used. After this length of time, a new password must be created. The format of the parameter is dd.hh.mm:ss, for example, 24.00:00 = 24 hours.

Type:Unlimited
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-DevicePasswordHistory

The DevicePasswordHistory parameter specifies the number of previously used passwords to store. When a user creates a password, the user can't reuse a stored password that was previously used.

Type:Int32
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-DevicePolicyRefreshInterval

The DevicePolicyRefreshInterval parameter specifies how often the policy is sent from the server to the mobile phone.

Type:Unlimited
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-DomainController

This parameter is available only in on-premises Exchange.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-IrmEnabled

The IrmEnabled parameter specifies whether Information Rights Management (IRM) is enabled for the mailbox policy.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-IsDefault

The IsDefault parameter specifies whether this policy is the default Mobile Device mailbox policy. The default value is $false. If another policy is currently set as the default, setting this parameter replaces the old default policy with this policy.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Online
-IsDefaultPolicy

The IsDefault parameter specifies whether this policy is the default Mobile Device mailbox policy. The default value is $false. If another policy is currently set as the default, setting this parameter replaces the old default policy with this policy.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-MaxAttachmentSize

The MaxAttachmentSize parameter specifies the maximum size of attachments that can be downloaded to the mobile phone. The default value is Unlimited.

Type:Unlimited
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-MaxCalendarAgeFilter

The MaxCalendarAgeFilter parameter specifies the maximum range of calendar days that can be synchronized to the device. The value is specified by entering one of the following values:

  • All

  • OneDay

  • ThreeDays

  • OneWeek

  • TwoWeeks

  • OneMonth

Type:All | TwoWeeks | OneMonth | ThreeMonths | SixMonths
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-MaxDevicePasswordFailedAttempts

The MaxDevicePasswordFailedAttempts parameter specifies the number of attempts a user can make to enter the correct password for the mobile phone. You can enter any number from 4 through 16. The default value is 8.

Type:Unlimited
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-MaxEmailAgeFilter

The MaxEmailAgeFilter parameter specifies the maximum number of days of email items to synchronize to the mobile phone. The value is specified by entering one of the following values.

  • All

  • OneDay

  • ThreeDays

  • OneWeek

  • TwoWeeks

  • OneMonth

Type:All | OneDay | ThreeDays | OneWeek | TwoWeeks | OneMonth
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-MaxEmailBodyTruncationSize

The MaxEmailBodyTruncationSize parameter specifies the maximum size at which email messages are truncated when synchronized to the mobile phone. The value is specified in kilobytes (KB).

Type:Unlimited
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-MaxEmailHTMLBodyTruncationSize

The MaxEmailHTMLBodyTruncationSize parameter specifies the maximum size at which HTML-formatted email messages are synchronized to the mobile phone. The value is specified in KB.

Type:Unlimited
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-MaxInactivityTimeDeviceLock

The MaxInactivityTimeDeviceLock parameter specifies the length of time that the mobile phone can be inactive before the password is required to reactivate it. You can enter any interval between 30 seconds and 1 hour. The default value is 15 minutes. The format of the parameter is hh.mm:ss, for example, 15:00 = 15 minutes.

Type:Unlimited
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-MinDevicePasswordComplexCharacters

The MinDevicePasswordComplexCharacters parameter specifies the minimum number of complex characters required in a mobile phone password. A complex character isn't a letter.

Type:Int32
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-MinDevicePasswordLength

The MinDevicePasswordLength parameter specifies the minimum number of characters in the device password. You can enter any number from 1 through 16. The maximum length a password can be is 16 characters. The default value is 4.

Type:Int32
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-Name

The Name parameter specifies the friendly name of the Mobile Device mailbox policy.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-PasswordRecoveryEnabled

The PasswordRecoveryEnabled parameter specifies whether the recovery password for the mobile phone is stored on an Exchange server. When set to $true, the PasswordRecoveryEnabled parameter enables you to store the recovery password for the mobile phone on an Exchange server. The default value is $false. The recovery password can be viewed from either Outlook on the web or the Exchange admin center.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-RequireDeviceEncryption

The RequireDeviceEncryption parameter specifies whether encryption is required on the device. The default value is $false.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-RequireEncryptedSMIMEMessages

The RequireEncryptedSMIMEMessages parameter specifies whether you must encrypt S/MIME messages. The default value is $false.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-RequireEncryptionSMIMEAlgorithm

The RequireEncryptionSMIMEAlgorithm parameter specifies what required algorithm must be used when encrypting a message.

Type:TripleDES | DES | RC2128bit | RC264bit | RC240bit
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-RequireManualSyncWhenRoaming

The RequireManualSyncWhenRoaming parameter specifies whether the mobile phone must synchronize manually while roaming. The default value is $false.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-RequireSignedSMIMEAlgorithm

The RequireSignedSMIMEAlgorithm parameter specifies what required algorithm must be used when signing a message.

Type:SHA1 | MD5
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-RequireSignedSMIMEMessages

The RequireSignedSMIMEMessages parameter specifies whether the mobile phone must send signed S/MIME messages.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-RequireStorageCardEncryption

The RequireStorageCardEncryption parameter specifies whether storage card encryption is enabled for the mailbox policy. Setting this parameter to $true also sets the DeviceEncryptionEnabled parameter to $true.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-UNCAccessEnabled

The UNCAccessEnabled parameter specifies whether access to Microsoft Windows file shares is enabled. Access to specific shares is configured on the Exchange ActiveSync virtual directory.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-UnapprovedInROMApplicationList

The UnapprovedInROMApplicationList parameter contains a list of applications that can't be run in ROM.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-WSSAccessEnabled

The WSSAccessEnabled parameter specifies whether access to Microsoft Windows SharePoint Services is enabled. Access to specific shares is configured on the Exchange ActiveSync virtual directory.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online
-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Online

Inputs

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (https://go.microsoft.com/fwlink/p/?LinkId=616387). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (https://go.microsoft.com/fwlink/p/?LinkId=616387). If the Output Type field is blank, the cmdlet doesn't return data.