Set-AddressList

This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.

Use the Set-AddressList cmdlet to modify existing address lists.

In Exchange Online, this cmdlet is available only in the Address Lists role, and by default, the role isn't assigned to any role groups. To use this cmdlet, you need to add the Address Lists role to a role group (for example, to the Organization Management role group). For more information, see the "Add a role to a role group" section in Manage role groups (https://technet.microsoft.com/library/jj657480.aspx).

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax (https://technet.microsoft.com/library/bb123552.aspx).

Syntax

Set-AddressList
   [-Identity] <AddressListIdParameter>
   [-ConditionalCompany <MultiValuedProperty>]
   [-ConditionalCustomAttribute1 <MultiValuedProperty>]
    [-ConditionalCustomAttribute10 <MultiValuedProperty>]
   [-ConditionalCustomAttribute11 <MultiValuedProperty>]
    [-ConditionalCustomAttribute12 <MultiValuedProperty>]
   [-ConditionalCustomAttribute13 <MultiValuedProperty>]
    [-ConditionalCustomAttribute14 <MultiValuedProperty>]
   [-ConditionalCustomAttribute15 <MultiValuedProperty>]
    [-ConditionalCustomAttribute2 <MultiValuedProperty>]
   [-ConditionalCustomAttribute3 <MultiValuedProperty>]
    [-ConditionalCustomAttribute4 <MultiValuedProperty>]
   [-ConditionalCustomAttribute5 <MultiValuedProperty>]
    [-ConditionalCustomAttribute6 <MultiValuedProperty>]
   [-ConditionalCustomAttribute7 <MultiValuedProperty>]
    [-ConditionalCustomAttribute8 <MultiValuedProperty>]
   [-ConditionalCustomAttribute9 <MultiValuedProperty>]
    [-ConditionalDepartment <MultiValuedProperty>]
   [-ConditionalStateOrProvince <MultiValuedProperty>]
    [-Confirm]
    [-DisplayName <String>]
   [-DomainController <Fqdn>]
    [-ForceUpgrade]
   [-IncludedRecipients <None | MailboxUsers | Resources | MailContacts | MailGroups | MailUsers | AllRecipients>]
   [-Name <String>]
    [-RecipientContainer <OrganizationalUnitIdParameter>]
    [-RecipientFilter <String>]
    [-WhatIf]
   [<CommonParameters>]

Description

Use the Get-AddressList cmdlet, piped to Format-List, to get the GUID, distinguished name (DN), or path and name of an existing address list. Or, use Get-AddressList to get a specific existing address list, and then pipe the output directly to the Set-AddressList cmdlet.

The Conditional parameters that are used with the IncludedRecipients parameter are subject to the following limitations:

  • The EQV operator is used for every property value, as in "Department equals Sales". Wildcards and partial matches aren't supported.

  • The OR operator is always used for multiple values of the same property, as in "Department equals Sales OR Marketing".

  • The AND operator is always used for multiple properties, as in "Department equals Sales AND Company equals Contoso".

To create flexible filters that use any available recipient property and that aren't subject to these limitations, you can use the RecipientFilter parameter to create a custom OPath filter.

You can't use this cmdlet to replace a precanned filter with a custom OPath filter, or vice-versa. You can only modify the existing filter.

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet (https://technet.microsoft.com/library/mt432940.aspx).

Examples

-------------------------- Example 1 --------------------------

Set-AddressList -Identity "All Users\Sales\building4" -Name building9

This example modifies the name of an existing address list.

-------------------------- Example 2 --------------------------

Set-AddressList -Identity c3fffd8e-026b-41b9-88c4-8c21697ac8ac -IncludedRecipients MailboxUsers -ConditionalDepartment Sales

This example modifies the type of recipients and the department of the recipients included in the existing address list identified by its GUID.

Parameters

-ConditionalCompany

The ConditionalCompany parameter specifies a precanned filter that's based on the value of the recipient's Company property.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: <value1>,<value2>,...<valueN>. If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>",..."<valueN>".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-ConditionalCustomAttribute1

The ConditionalCustomAttribute1 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute1 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: <value1>,<value2>,...<valueN>. If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>",..."<valueN>".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-ConditionalCustomAttribute10

The ConditionalCustomAttribute10 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute10 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: <value1>,<value2>,...<valueN>. If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>",..."<valueN>".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-ConditionalCustomAttribute11

The ConditionalCustomAttribute11 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute11 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: <value1>,<value2>,...<valueN>. If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>",..."<valueN>".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-ConditionalCustomAttribute12

The ConditionalCustomAttribute12 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute12 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: <value1>,<value2>,...<valueN>. If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>",..."<valueN>".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-ConditionalCustomAttribute13

The ConditionalCustomAttribute13 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute13 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: <value1>,<value2>,...<valueN>. If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>",..."<valueN>".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-ConditionalCustomAttribute14

The ConditionalCustomAttribute14 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute14 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: <value1>,<value2>,...<valueN>. If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>",..."<valueN>".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-ConditionalCustomAttribute15

The ConditionalCustomAttribute15 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute15 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: <value1>,<value2>,...<valueN>. If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>",..."<valueN>".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-ConditionalCustomAttribute2

The ConditionalCustomAttribute2 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute2 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: <value1>,<value2>,...<valueN>. If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>",..."<valueN>".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-ConditionalCustomAttribute3

The ConditionalCustomAttribute3 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute3 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: <value1>,<value2>,...<valueN>. If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>",..."<valueN>".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-ConditionalCustomAttribute4

The ConditionalCustomAttribute4 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute4 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: <value1>,<value2>,...<valueN>. If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>",..."<valueN>".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-ConditionalCustomAttribute5

The ConditionalCustomAttribute5 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute5 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: <value1>,<value2>,...<valueN>. If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>",..."<valueN>".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-ConditionalCustomAttribute6

The ConditionalCustomAttribute6 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute6 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: <value1>,<value2>,...<valueN>. If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>",..."<valueN>".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-ConditionalCustomAttribute7

The ConditionalCustomAttribute7 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute7 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: <value1>,<value2>,...<valueN>. If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>",..."<valueN>".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-ConditionalCustomAttribute8

The ConditionalCustomAttribute8 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute8 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: <value1>,<value2>,...<valueN>. If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>",..."<valueN>".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-ConditionalCustomAttribute9

The ConditionalCustomAttribute9 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute9 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: <value1>,<value2>,...<valueN>. If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>",..."<valueN>".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-ConditionalDepartment

The ConditionalDepartment parameter specifies a precanned filter that's based on the value of the recipient's Department property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: <value1>,<value2>,...<valueN>. If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>",..."<valueN>".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-ConditionalStateOrProvince

The ConditionalStateOrProvince parameter specifies a precanned filter that's based on the value of the recipient's StateOrProvince property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: <value1>,<value2>,...<valueN>. If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>",..."<valueN>".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

Type:MultiValuedProperty
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.

  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-DisplayName

The DisplayName parameter specifies the display name of the group. The display name is visible in the Exchange admin center and in Outlook. The maximum length is 256 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-DomainController

This parameter is available only in on-premises Exchange.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-ForceUpgrade

This parameter is available only in on-premises Exchange.

The ForceUpgrade switch specifies whether to suppress the confirmation message that appears if the object was created in a previous version of Exchange. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-Identity

The Identity parameter specifies the address list that you want to modify. You can use any value that uniquely identifies the address list. For example:

  • Name

  • Distinguished name (DN)

  • GUID

  • Path: (\<Name>) or [<Container>\<Name>)

Type:AddressListIdParameter
Position:1
Default value:None
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-IncludedRecipients

The IncludedRecipients parameter specifies a precanned filter that's based on the recipient type. Valid values are:

  • AllRecipients: This value can be used only by itself.

  • MailboxUsers

  • MailContacts

  • MailGroups

  • MailUsers

  • Resources: This value indicates room or equipment mailboxes.

You can specify multiple values separated by commas. When you use multiple values, the OR Boolean operator is applied.

Type:None | MailboxUsers | Resources | MailContacts | MailGroups | MailUsers | AllRecipients
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-Name

The Name parameter specifies a unique name for the address list. The maximum length is 64 characters, and it can't include a carriage return or a backslash (\). If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-RecipientContainer

This parameter is available only in on-premises Exchange.

The RecipientContainer parameter specifies a filter that's based on the recipient's location in Active Directory. Valid input for this parameter is an organizational unit (OU) or domain that's visible using the Get-OrganizationalUnit cmdlet. You can use any value that uniquely identifies the OU or domain. For example:

  • Name

  • Canonical name

  • Distinguished name (DN)

  • GUID

If you don't use this parameter, the default value is the OU where the object was created.

Type:OrganizationalUnitIdParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-RecipientFilter

The RecipientFilter parameter specifies a custom OPath filter that's based on the value of any available recipient property. You can use any available Windows PowerShell operator, and wildcards and partial matches are supported. When you use this parameter, remember the following OPath filter rules:

  • Use braces { } around the whole OPath syntax string.

  • Include a hyphen before all operators.

  • In cloud-based environments, you can't use a wildcard as the first character. For example, Sales* is allowed, but *Sales isn't allowed.

  • In on-premises Exchange, wildcards are valid only as the first or last character. For example, Sales* or *Sales are allowed, but Sa*les isn't allowed.

For more information, see Filterable properties for the -RecipientFilter parameter (https://technet.microsoft.com/library/bb738157.aspx).

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

Inputs

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (https://go.microsoft.com/fwlink/p/?LinkId=616387). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (https://go.microsoft.com/fwlink/p/?LinkId=616387). If the Output Type field is blank, the cmdlet doesn't return data.