Set-MailboxCalendarFolder

This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.

Use the Set-MailboxCalendarFolder cmdlet to configure calendar publishing or sharing settings on a mailbox for the visibility of calendar information to external users. To add or modify the permissions so internal users can access the calendar, use the Add-MailboxFolderPermission or Set-MailboxFolderPermission cmdlets.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax (https://technet.microsoft.com/library/bb123552.aspx).

Syntax

Set-MailboxCalendarFolder
   [-Identity] <MailboxFolderIdParameter>
   [-Confirm]
   [-DetailLevel <AvailabilityOnly | LimitedDetails | FullDetails>]
   [-DomainController <Fqdn>]
   [-PublishDateRangeFrom <OneDay | ThreeDays | OneWeek | OneMonth | ThreeMonths | SixMonths | OneYear>]
   [-PublishDateRangeTo <OneDay | ThreeDays | OneWeek | OneMonth | ThreeMonths | SixMonths | OneYear>]
   [-PublishEnabled <$true | $false>]
   [-ResetUrl]
   [-SearchableUrlEnabled <$true | $false>]
   [-WhatIf]
   [-SetAsSharingSource]
   [-UseHttps]
   [<CommonParameters>]

Description

The Set-MailboxCalendarFolder cmdlet configures publishing information. The calendar folder can be configured as follows:

  • Whether the calendar folder is enabled for publishing

  • Range of start and end calendar days to publish

  • Level of detail to publish for the calendar

  • Whether the published URL of the calendar is enabled for search on the web

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet (https://technet.microsoft.com/library/mt432940.aspx).

Examples

-------------------------- Example 1 --------------------------

Set-MailboxCalendarFolder -Identity kai:\Calendar -DetailLevel LimitedDetails

This example sets the level of details to publish for Kai's shared calendar to LimitedDetails, which means limited details are displayed.

-------------------------- Example 2 --------------------------

Set-MailboxCalendarFolder -Identity kai:\Calendar -SearchableUrlEnabled $true

This example enables the calendar in Kai's mailbox to be searchable on the web.

Required Parameters

-Identity

The Identity parameter specifies the mailbox and folder path or folder name to the calendar folder that has the publishing settings configured. You can use the following values:

  • GUID

  • ADObjectID

  • Distinguished name (DN)

  • Domain\Account

  • User principal name (UPN)

  • LegacyExchangeDN

  • SmtpAddress

  • Alias

Type:MailboxFolderIdParameter
Position:1
Default value:None
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

Optional Parameters

-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.

  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-DetailLevel

The DetailLevel parameter specifies the level of calendar detail that's published and available to anonymous users. You can use the following values:

  • AvailabilityOnly

  • LimitedDetails

  • FullDetails

  • Editor

The default value is AvailabilityOnly.

Type:AvailabilityOnly | LimitedDetails | FullDetails
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-DomainController

This parameter is available only in on-premises Exchange.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019
-PublishDateRangeFrom

The PublishDateRangeFrom parameter specifies the number of days of calendar information to publish before the current date. You can use the following values:

  • OneDay

  • ThreeDays

  • OneWeek

  • OneMonth

  • ThreeMonths

  • SixMonths

  • OneYear

The default value is ThreeMonths.

Type:OneDay | ThreeDays | OneWeek | OneMonth | ThreeMonths | SixMonths | OneYear
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-PublishDateRangeTo

The PublishDateRangeTo parameter specifies the number of days of calendar information to publish after the current date. You can use the following values:

  • OneDay

  • ThreeDays

  • OneWeek

  • OneMonth

  • ThreeMonths

  • SixMonths

  • OneYear

The default value is ThreeMonths.

Type:OneDay | ThreeDays | OneWeek | OneMonth | ThreeMonths | SixMonths | OneYear
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-PublishEnabled

The PublishEnabled parameter specifies whether the specified calendar should be enabled for publishing. The default value is $true.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-ResetUrl

The ResetUrl parameter replaces the existing non-public URL with a new URL for a calendar that has been published without being publicly searchable.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-SearchableUrlEnabled

The SearchableUrlEnabled parameter specifies whether the published calendar URL can be searched on the web. The default value is $false.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online
-SetAsSharingSource

The SetAsSharingSource switch specifies whether to set the calendar folder as a sharing source. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019, Exchange Online
-UseHttps

The UseHttps switch specifies whether to use HTTPS for the published URL of the calendar folder. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019, Exchange Online
-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

Inputs

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (https://go.microsoft.com/fwlink/p/?LinkId=616387). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (https://go.microsoft.com/fwlink/p/?LinkId=616387). If the Output Type field is blank, the cmdlet doesn't return data.