Describes how PowerShell determines which command to run.
Command precedence describes how PowerShell determines which command to run when a session contains more than one command with the same name. Commands within a session can be hidden or replaced by commands with the same name. This article shows you how to run hidden commands and how to avoid command-name conflicts.
When a PowerShell session includes more than one command that has the same name, PowerShell determines which command to run by using the following rules.
If you specify the path to a command, PowerShell runs the command at the location specified by the path.
For example, the following command runs the FindDocs.ps1 script in the "C:\TechDocs" directory:
As a security feature, PowerShell does not run executable (native) commands,
including PowerShell scripts, unless the command is located in a path that is
listed in the Path environment variable
$env:path or unless you specify the
path to the script file.
To run a script that is in the current directory, specify the full path, or
type a dot
.\ to represent the current directory.
For example, to run the FindDocs.ps1 file in the current directory, type:
Using wildcards in execution
You may use wildcards in command execution. Using wildcard characters is also known as globbing.
PowerShell executes a file that has a wildcard match, before a literal match.
For example, consider a directory with the following files:
Get-ChildItem C:\temp\test Directory: C:\temp\test Mode LastWriteTime Length Name ---- ------------- ------ ---- -a---- 5/20/2019 2:29 PM 28 a.ps1 -a---- 5/20/2019 2:29 PM 28 [a1].ps1
Both script files have the same content:
This command displays the name of the script that is invoked.
When you run
[a1].ps1, the file
a.ps1 is executed even though the file
[a1].ps1 is a literal match.
Now let's delete the
a.ps1 file and attempt to run it again.
Remove-Item C:\temp\test\a.ps1 C:\temp\test\[a1].ps1
You can see from the output that
[a1].ps1 runs this time because the literal
match is the only file match for that wildcard pattern.
For more information about how PowerShell uses wildcards, see about_Wildcards.
To limit the search to a relative path, you must prefix the script name with
.\ path. This limits the search for commands to files in that relative
path. Without this prefix, other PowerShell syntax may conflict and there are
few guarantees that the file will be found.
If you do not specify a path, PowerShell uses the following precedence order when it runs commands for all items loaded in the current session:
- External executable files (programs and non-PowerShell scripts)
Therefore, if you type "help", PowerShell first looks for an alias named
help, then a function named
Help, and finally a cmdlet named
runs the first
help item that it finds.
For example, if your session contains a cmdlet and a function, both named
Get-Map, when you type
Get-Map, PowerShell runs the function.
This only applies to loaded commands. If there is a
build executable and an
build for a function with the name of
Invoke-Build inside a module
that is not loaded into the current session, PowerShell runs the
executable instead. It does not auto-load modules if it finds the external
executable in this case. It is only when no external executable is found that
an alias, function, or cmdlet with the given name is invoked, thereby
triggering auto-loading of its module.
When the session contains items of the same type that have the same name, PowerShell runs the newer item.
For example, if you import another
Get-Date cmdlet from a module, when you
Get-Date, PowerShell runs the imported version over the native one.
Hidden and replaced items
As a result of these rules, items can be replaced or hidden by items with the same name.
Items are "hidden" or "shadowed" if you can still access the original item, such as by qualifying the item name with a module or snap-in name.
For example, if you import a function that has the same name as a cmdlet in the session, the cmdlet is hidden (but not replaced) because it was imported from a snap-in or module.
Items are "replaced" or "overwritten" if you can no longer access the original item.
For example, if you import a variable that has the same name as a variable in the session, the original variable is replaced and is no longer accessible. You cannot qualify a variable with a module name.
Also, if you type a function at the command line and then import a function with the same name, the original function is replaced and is no longer accessible.
Finding hidden commands
The All parameter of the
Get-Command cmdlet gets all
commands with the specified name, even if they are hidden or replaced.
Beginning in PowerShell 3.0, by default,
Get-Command gets only the commands
that run when you type the command name.
In the following examples, the session includes a
Get-Date function and a
The following command gets the
Get-Date command that runs when you type
CommandType Name ModuleName ----------- ---- ---------- Function Get-Date
The following command uses the All parameter to get all
Get-Command Get-Date -All
CommandType Name ModuleName ----------- ---- ---------- Function Get-Date Cmdlet Get-Date Microsoft.PowerShell.Utility
Running hidden commands
You can run particular commands by specifying item properties that distinguish the command from other commands that might have the same name. You can use this method to run any command, but it is especially useful for running hidden commands.
Using qualified names
Using the module-qualified name of a cmdlet allows you to run commands hidden
by an item with the same name. For example, you can run the
by qualifying it with its module name Microsoft.PowerShell.Utility.
Use this preferred method when writing scripts that you intend to distribute. You cannot predict which commands might be present in the session in which the script runs.
New-Alias -Name "Get-Date" -Value "Get-ChildItem" Microsoft.PowerShell.Utility\Get-Date
Tuesday, September 4, 2018 8:17:25 AM
To run a
New-Map command that was added by the
MapFunctions module, use
its module-qualified name:
To find the module from which a command was imported, use the ModuleName property of commands.
For example, to find the source of the
Get-Date cmdlet, type:
You cannot qualify variables or aliases.
Using the call operator
The call operator executes strings and script blocks in a child scope. For more information, see about_Operators.
For example, if you have a function named
Map that is hidden by an alias
Map, use the following command to run the function.
&(Get-Command -Name Map -CommandType Function)
You can also save your hidden command in a variable to make it easier to run.
For example, the following command saves the
Map function in the
variable and then uses the
Call operator to run it.
$myMap = (Get-Command -Name map -CommandType function) &($myMap)
A "replaced" item is one that you can no longer access. You can replace items by importing items of the same name from a module or snap-in.
For example, if you type a
Get-Map function in your session, and you import
a function called
Get-Map, it replaces the original function. You cannot
retrieve it in the current session.
Variables and aliases cannot be hidden because you cannot use a call operator or a qualified name to run them. When you import variables and aliases from a module or snap-in, they replace variables in the session with the same name.
Avoiding name conflicts
The best way to manage command name conflicts is to prevent them. When you name your commands, use a unique name. For example, add your initials or company name acronym to the nouns in your commands.
Also, when you import commands into your session from a PowerShell
module or from another session, use the
Prefix parameter of the
Import-PSSession cmdlet to add a prefix to the nouns in the names of commands.
For example, the following command avoids any conflict with the
Set-Date cmdlets that come with PowerShell when you import the
Import-Module -Name DateFunctions -Prefix ZZ
Running external executables
PowerShell treats the file extensions listed in the
variable as executable files. Windows executable files are files with
.EXE file extensions. Windows executables and any other files with
extensions listed in
$env:PATHEXT are executed in the current console
Files that are not Windows executables are handed to Windows to process. Windows looks up the file association and executes the default Windows Shell verb for the extension. For Windows to support the execution by file extension, the association must be registered with the system.
You can register the executable engine for a file extension using the
assoc commands of the CMD command shell. PowerShell has no direct method
to register the file handler. For more information, see the documentation for
the ftype command.
For PowerShell to see a file extension as executable in the current session,
you must add the extension to the
$env:PATHEXT environment variable.
Submit and view feedback for