Receive-Job

Gets the results of the PowerShell background jobs in the current session.

Syntax

Receive-Job
       [-Job] <Job[]>
       [[-Location] <string[]>]
       [-Keep]
       [-NoRecurse]
       [-Force]
       [-Wait]
       [-AutoRemoveJob]
       [-WriteEvents]
       [-WriteJobInResults]
       [<CommonParameters>]
Receive-Job
       [-Job] <Job[]>
       [[-ComputerName] <string[]>]
       [-Keep]
       [-NoRecurse]
       [-Force]
       [-Wait]
       [-AutoRemoveJob]
       [-WriteEvents]
       [-WriteJobInResults]
       [<CommonParameters>]
Receive-Job
       [-Job] <Job[]>
       [[-Session] <PSSession[]>]
       [-Keep]
       [-NoRecurse]
       [-Force]
       [-Wait]
       [-AutoRemoveJob]
       [-WriteEvents]
       [-WriteJobInResults]
       [<CommonParameters>]
Receive-Job
       [-Name] <string[]>
       [-Keep]
       [-NoRecurse]
       [-Force]
       [-Wait]
       [-AutoRemoveJob]
       [-WriteEvents]
       [-WriteJobInResults]
       [<CommonParameters>]
Receive-Job
       [-InstanceId] <guid[]>
       [-Keep]
       [-NoRecurse]
       [-Force]
       [-Wait]
       [-AutoRemoveJob]
       [-WriteEvents]
       [-WriteJobInResults]
       [<CommonParameters>]
Receive-Job
       [-Id] <int[]>
       [-Keep]
       [-NoRecurse]
       [-Force]
       [-Wait]
       [-AutoRemoveJob]
       [-WriteEvents]
       [-WriteJobInResults]
       [<CommonParameters>]

Description

The Receive-Job cmdlet gets the results of PowerShell background jobs, such as those started by using the Start-Job cmdlet or the AsJob parameter of any cmdlet. You can get the results of all jobs or identify jobs by their name, ID, instance ID, computer name, location, or session, or by submitting a job object.

When you start a PowerShell background job, the job starts, but the results don't appear immediately. Instead, the command returns an object that represents the background job. The job object contains useful information about the job, but it doesn't contain the results. This method lets you continue to work in the session while the job runs. For more information about background jobs in PowerShell, see about_Jobs.

The Receive-Job cmdlet gets the results that have been generated by the time that the Receive-Job command is submitted. If the results aren't yet complete, you can run additional Receive-Job commands to get the remaining results.

By default, job results are deleted from the system when you receive them, but you can use the Keep parameter to save the results so that you can receive them again. To delete the job results, run the Receive-Job command again without the Keep parameter, close the session, or use the Remove-Job cmdlet to delete the job from the session.

Starting in Windows PowerShell 3.0, Receive-Job also gets the results of custom job types, such as workflow jobs and instances of scheduled jobs. To enable Receive-Job to get the results a custom job type, import the module that supports the custom job type into the session before it runs a Receive-Job command, either by using the Import-Module cmdlet or by getting a cmdlet in the module. For information about a particular custom job type, see the documentation of the custom job type feature.

Examples

Example 1: Get results for a particular job

$job = Start-Job -ScriptBlock {Get-Process}
Start-Sleep -Seconds 1
Receive-Job -Job $job

These commands use the Job parameter of Receive-Job to get the results of a particular job.

The first command starts a job with Start-Job and stores the job object in the $job variable.

The second command uses the Receive-Job cmdlet to get the results of the job. It uses the Job parameter to specify the job.

Example 2: Use the Keep parameter

$job = Start-Job -ScriptBlock {Get-Service dhcp, fakeservice}
Start-Sleep -Seconds 1
$job | Receive-Job -Keep

Cannot find any service with service name 'fakeservice'.
    + CategoryInfo          : ObjectNotFound: (fakeservice:String) [Get-Service], ServiceCommandException
    + FullyQualifiedErrorId : NoServiceFoundForGivenName,Microsoft.PowerShell.Commands.GetServiceCommand
    + PSComputerName        : localhost

Status   Name               DisplayName
------   ----               -----------
Running  dhcp               DHCP Client

$job | Receive-Job -Keep

Cannot find any service with service name 'fakeservice'.
    + CategoryInfo          : ObjectNotFound: (fakeservice:String) [Get-Service], ServiceCommandException
    + FullyQualifiedErrorId : NoServiceFoundForGivenName,Microsoft.PowerShell.Commands.GetServiceCommand
    + PSComputerName        : localhost

Status   Name               DisplayName
------   ----               -----------
Running  dhcp               DHCP Client

This example stores a job in the $job variable, and pipes the job to the Receive-Job cmdlet. The -Keep parameter is also used to allow all aggregated stream data to be retrieved again after first view.

Example 3: Get results of several background jobs

When you use the AsJob parameter of Invoke-Command to start a job, the job object is created on the local computer, even though the job runs on the remote computers. As a result, you use local commands to manage the job.

Also, when you use AsJob, PowerShell returns one job object that contains a child job for each job that was started. In this case, the job object contains three child jobs, one for each job on each remote computer.

# Use the Invoke-Command cmdlet with the -AsJob parameter to start a background job that
# runs a Get-Service command on three remote computers. Store the resulting job object in
# the $j variable
$j = Invoke-Command -ComputerName Server01, Server02, Server03 -ScriptBlock {Get-Service} -AsJob
# Display the value of the **ChildJobs** property of the job object in $j. The display
# shows that the command created three child jobs, one for the job on each remote
# computer. You could also use the -IncludeChildJobs parameter of the Get-Job cmdlet.
$j.ChildJobs

Id   Name     State      HasMoreData   Location       Command
--   ----     -----      -----------   --------       -------
2    Job2     Completed  True          Server01       Get-Service
3    Job3     Completed  True          Server02       Get-Service
4    Job4     Completed  True          Server03       Get-Service

# Use the Receive-Job cmdlet to get the results of just the Job3 child job that ran on the
# Server02 computer. Use the *Keep* parameter to allow you to view the aggregated stream
# data more than once.
Receive-Job -Name Job3 -Keep

Status  Name        DisplayName                        PSComputerName
------  ----------- -----------                        --------------
Running AeLookupSvc Application Experience             Server02
Stopped ALG         Application Layer Gateway Service  Server02
Running Appinfo     Application Information            Server02
Running AppMgmt     Application Management             Server02

Example 4: Get results of background jobs on multiple remote computers

# Use the New-PSSession cmdlet to create three user-managed PSSessions on three servers,
# and save the sessions in the $s variable.
$s = New-PSSession -ComputerName Server01, Server02, Server03
# Use Invoke-Command run a Start-Job command in each of the PSSessions in the $s variable.
# The code creates a new job with a custom name to each server. The job outputs the
# datetime from each server. Save the job objects in the $j variable.
$invokeCommandSplat = @{
    Session = $s
    ScriptBlock = {
        Start-Job -Name $('MyJob-' +$env:COMPUTERNAME) -ScriptBlock {
            (Get-Date).ToString()
        }
    }
}
$j = Invoke-Command @invokeCommandSplat
# To confirm that these job objects are from the remote machines, run Get-Job to show no
# local jobs running.
Get-Job`
# Display the three job objects in $j. Note that the Localhost location is not the local
# computer, but instead localhost as it relates to the job on each Server.
$j

Id   Name               State      HasMoreData   Location   Command
--   ----               -----      -----------   --------   -------
1    MyJob-Server01     Completed  True          Localhost  (Get-Date).ToString()
2    MyJob-Server02     Completed  True          Localhost  (Get-Date).ToString()
3    MyJob-Server03     Completed  True          Localhost  (Get-Date).ToString()

# Use Invoke-Command to run a Receive-Job command in each of the sessions in the $s
# variable and save the results in the $results variable. The Receive-Job command must be
# run in each session because the jobs were run locally on each server.
$results = Invoke-Command -Session $s -ScriptBlock {
    Receive-Job -Name $('MyJob-' +$env:COMPUTERNAME)
}

3/22/2021 7:41:47 PM
3/22/2021 7:41:47 PM
3/22/2021 9:41:47 PM

This example shows how to get the results of background jobs run on three remote computers. Unlike the previous example, using Invoke-Command to run the Start-Job command actually started three independent jobs on each of the three computers. As a result, the command returned three job objects representing three jobs run locally on three different computers.

Example 5: Access child jobs

The -Keep parameter preserves the state of the aggregated streams of a job so that it can be viewed again. Without this parameter all aggregated stream data is erased when the job is received. For more information, see about_Job_Details

Note

The aggregated streams include the streams of all child jobs. You can still reach the individual streams of data through the job object and child job objects.

Start-Job -Name TestJob -ScriptBlock {dir C:\, Z:\}
# Without the Keep parameter, aggregated child job data is displayed once.
# Then destroyed.
Receive-Job -Name TestJob

Directory: C:\

Mode                LastWriteTime         Length Name
----                -------------         ------ ----
d-r---        1/24/2019   7:11 AM                Program Files
d-r---        2/13/2019   8:32 AM                Program Files (x86)
d-r---        10/3/2018  11:47 AM                Users
d-----         2/7/2019   1:52 AM                Windows
Cannot find drive. A drive with the name 'Z' does not exist.
    + CategoryInfo          : ObjectNotFound: (Z:String) [Get-ChildItem], DriveNotFoundException
    + FullyQualifiedErrorId : DriveNotFound,Microsoft.PowerShell.Commands.GetChildItemCommand
    + PSComputerName        : localhost

# It would seem that the child job data is gone.
Receive-Job -Name TestJob



# Using the object model, you can still retrieve child job data and streams.
$job = Get-Job -Name TestJob
$job.ChildJobs[0].Error

Cannot find drive. A drive with the name 'Z' does not exist.
    + CategoryInfo          : ObjectNotFound: (Z:String) [Get-ChildItem], DriveNotFoundException
    + FullyQualifiedErrorId : DriveNotFound,Microsoft.PowerShell.Commands.GetChildItemCommand
    + PSComputerName        : localhost

Parameters

-AutoRemoveJob

Indicates that this cmdlet deletes the job after it returns the job results. If the job has more results, the job is still deleted, but Receive-Job displays a message.

This parameter works only on custom job types. It's designed for instances of job types that save the job or the type outside of the session, such as instances of scheduled jobs.

This parameter can't be used without the Wait parameter.

This parameter was introduced in Windows PowerShell 3.0.

Type:SwitchParameter
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ComputerName

Specifies an array of names of computers.

This parameter selects from among the job results that are stored on the local computer. It doesn't get data for jobs run on remote computers. To get job results that are stored on remote computers, use the Invoke-Command cmdlet to run a Receive-Job command remotely.

Type:String[]
Aliases:Cn
Position:1
Default value:All computers available
Required:False
Accept pipeline input:True
Accept wildcard characters:True

-Force

Indicates that this cmdlet continues waiting if jobs are in the Suspended or Disconnected state. By default, the Wait parameter of Receive-Job returns, or terminates the wait, when jobs are in one of the following states:

  • Completed
  • Failed
  • Stopped
  • Suspended
  • Disconnected.

The Force parameter is valid only when the Wait parameter is also used in the command.

This parameter was introduced in Windows PowerShell 3.0.

Type:SwitchParameter
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Id

Specifies an array of IDs. This cmdlet gets the results of jobs with the specified IDs.

The ID is an integer that uniquely identifies the job in the current session. it's easier to remember and type than the instance ID, but it's unique only in the current session. You can type one or more IDs separated by commas. To find the ID of a job, use Get-Job.

Type:Int32[]
Position:0
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-InstanceId

Specifies an array of instance IDs. This cmdlet gets the results of jobs with the specified instance IDs.

An instance ID is a GUID that uniquely identifies the job on the computer. To find the instance ID of a job, use the Get-Job cmdlet.

Type:Guid[]
Position:0
Default value:All instances
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Job

Specifies the job for which results are being retrieved.

Enter a variable that contains the job or a command that gets the job. You can also pipe a job object to Receive-Job.

Type:Job[]
Position:0
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Keep

Indicates that this cmdlet saves the aggregated stream data in the system, even after you have received them. By default, aggregated stream data is erased after viewed with Receive-Job.

Closing the session, or removing the job with the Remove-Job cmdlet also deletes aggregated stream data.

Type:SwitchParameter
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Location

Specifies an array of locations. This cmdlet gets only the results of jobs in the specified locations.

Type:String[]
Position:1
Default value:All locations
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Name

Specifies an array of friendly names. This cmdlet gets the results of jobs that have the specified names. Wildcard characters are supported.

Type:String[]
Position:0
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:True

-NoRecurse

Indicates that this cmdlet gets results only from the specified job. By default, Receive-Job also gets the results of all child jobs of the specified job.

Type:SwitchParameter
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Session

Specifies an array of sessions. This cmdlet gets the results of jobs that were run in the specified PowerShell session (PSSession). Enter a variable that contains the PSSession or a command that gets the PSSession, such as a Get-PSSession command.

Type:PSSession[]
Position:1
Default value:All sessions
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Wait

Indicates that this cmdlet suppresses the command prompt until all job results are received. By default, Receive-Job immediately returns the available results.

By default, the Wait parameter waits until the job is in one of the following states:

  • Completed
  • Failed
  • Stopped
  • Suspended
  • Disconnected

To direct the Wait parameter to continue waiting if the job state is Suspended or Disconnected, use the Force parameter together with the Wait parameter.

This parameter was introduced in Windows PowerShell 3.0.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WriteEvents

Indicates that this cmdlet reports changes in the job state while it waits for the job to finish.

This parameter is valid only when the Wait parameter is used in the command and the Keep parameter is omitted.

This parameter was introduced in Windows PowerShell 3.0.

Type:SwitchParameter
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WriteJobInResults

Indicates that this cmdlet returns the job object followed by the results.

This parameter is valid only when the Wait parameter is used in the command and the Keep parameter is omitted.

This parameter was introduced in Windows PowerShell 3.0.

Type:SwitchParameter
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

Job

You can pipe job objects to this cmdlet.

Outputs

PSObject

This cmdlet returns the results of the commands in the job.

Notes

PowerShell includes the following aliases for Receive-Job:

  • All platforms:
    • rcjb