Set-CsVideoInteropServer

Use the `Set-CsVideoInteropServer` to modify the property values of one or more Video Interop Servers (VIS). The Video Interop Server is a Skype service that is used to communicate with a Video Gateway via a Session Initiation Protocol (SIP) trunk. Video Gateways route traffic between internal and 3rd party video devices such as an internal Skype endpoint exchanging video with a 3rd party PBX supporting 3rd party video teleconferencing systems (VTCs). The Video Gateway and a Video Interop Server (VIS) use a Session Initiation Protocol (SIP) trunk to connect video calls between 3rd party VTCs and internal endpoints.

Syntax

Set-CsVideoInteropServer
   [[-Identity] <XdsGlobalRelativeIdentity>]
   [-AudioPortCount <UInt16>]
   [-AudioPortStart <UInt16>]
   [-Confirm]
   [-Force]
   [-Registrar <String>]
   [-RegistrationTcpPort <UInt16>]
   [-RegistrationTlsPort <UInt16>]
   [-SipTrunkTcpPort <UInt16>]
   [-SipTrunkTlsPort <UInt16>]
   [-VideoPortCount <UInt16>]
   [-VideoPortStart <UInt16>]
   [-WhatIf]
   [<CommonParameters>]

Description

The Video Interop Server (VIS) in Skype for Business Server incorporates 3rd party video teleconferencing systems (VTCs) into your Skype for Business Server infrastructure. The VIS is a service that runs on a standalone pool and cannot be co-located on an FE pool.

To enable the Video Interop Server, you must use Topology Builder to define at least one VIS instance. Each VIS instance will typically be associated with one or more Video Gateways. Video Gateways route traffic between internal and 3rd party video devices such as an internal Skype endpoint receiving video from a 3rd party PBX supporting 3rd party video teleconferencing systems (VTCs). The Video Gateway and a VIS use a Session Initiation Protocol (SIP) trunk to connect video calls between 3rd party VTCs and internal endpoints.

After the Video Interop Server has been defined by using the Topology Builder, you can then modify the properties of that server by using the Set-CsVideoInteropServer cmdlet.

To return a list of all the role-based access control (RBAC) roles this cmdlet has been assigned to (including any custom RBAC roles you have created yourself), run the following command from the Windows PowerShell prompt.

Get-CsAdminRole | Where-Object {$_.Cmdlets -Match "Set-CsVideoInteropServer"}

Examples

-------------------------- Example 1 --------------------------

Set-CsVideoInteropServer -Identity "VideoInteropServer:atl-cs-001.litwareinc.com" -SipTrunkTlsPort 444

This example sets the SIP trunk TLS port for the Video Interop server VideoInteropServer:atl-cs-001.litwareinc.com to port 444.

-------------------------- Example 2 --------------------------

Get-CsService -VideoInteropServer | Set-CsVideoInteropServer -SipTrunkTlsPort 444

This example sets the SIP trunk TLS port for all the organization's Video Interop servers is set to port 444. This the command first calls the Get-CsService cmdlet, along with the VideoInteropServer parameter, to return a collection of all the Video Interop servers configured for use in the organization. That collection is then piped to the Set-CsVideoInteropServer cmdlet, which changes the TLS port for each server in the collection.

Optional Parameters

-AudioPortCount

Total number of ports allocated for sending and receiving audio traffic. The actual ports to be opened will start with the value configured for AudioPortStart and continue through the number of ports specified for AudioPortCount. For example, if the AudioPortStart is set to 60000 and the AudioPortCount is set to 100, then ports 60000 through 60099 will be used for audio traffic.

Type:UInt16
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Skype for Business Server 2015
-AudioPortStart

First port in the range of ports allocated for sending and receiving audio traffic. For example: -AudioPortStart 60000.

Type:UInt16
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Skype for Business Server 2015
-Confirm

Prompts you for confirmation before executing the command.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Skype for Business Server 2015
-Force

Suppresses the display of any non-fatal error message that might occur when running the command.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Skype for Business Server 2015
-Identity

Service location of the Video Interop Server to be modified. For example: -Identity "VideoInteropServer:atl-cs-001.litwareinc.com".

Type:XdsGlobalRelativeIdentity
Position:2
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Skype for Business Server 2015
-Registrar

Service identity of the Registrar associated with the Video Interop Server. For example: -Registrar "Registrar:atl-cs-001.litwareinc.com".

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Skype for Business Server 2015
-RegistrationTcpPort

This parameter is reserved for internal Microsoft use.

Type:UInt16
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Skype for Business Server 2015
-RegistrationTlsPort

This parameter is reserved for internal Microsoft use.

Type:UInt16
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Skype for Business Server 2015
-SipTrunkTcpPort

TCP (Transmission Control Protocol) listening port on the Video Interop Server used for SIP trunk communication with a Video Gateway.

Type:UInt16
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Skype for Business Server 2015
-SipTrunkTlsPort

TLS (Transport Layer Security) listening port on the Video Interop Server used for SIP trunk communication with a Video Gateway.

Type:UInt16
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Skype for Business Server 2015
-VideoPortCount

Total number of ports allocated for sending and receiving video traffic. The actual ports to be opened will start with the value configured for VideoPortStart and continue through the number of ports specified for VideoPortCount. For example, if the VideoPortStart is set to 60000 and the VideoPortCount is set to 100, then ports 60000 through 60099 will be used for video traffic.

Type:UInt16
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Skype for Business Server 2015
-VideoPortStart

First port in the range of ports allocated for sending and receiving video traffic. For example: -AudioPortStart 60000.

Type:UInt16
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Skype for Business Server 2015
-WhatIf

Describes what would happen if you executed the command without actually executing the command.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Skype for Business Server 2015

Inputs

The Set-CsVideoInteropServer accepts pipelined instances of the Microsoft.Rtc.Management.Xds.DisplayVideoInteropServer object.

Outputs

None. The Set-CsVideoInteropServer cmdlet does not return any objects or values.