New-SCVMHostConfig

Creates a host configuration.

Syntax

New-SCVMHostConfig -BMCAddress <String> [-BMCCustomConfigurationProvider <ConfigurationProvider>]
 [-BMCPort <Int32>] -BMCProtocol <OutOfBandManagementType> -BMCRunAsAccount <RunAsAccount>
 [-BootDiskVolume <String>] [-BypassADMachineAccountCheck] -ComputerName <String> [-Description <String>]
 [-JobVariable <String>] [-PROTipID <Guid>] [-RunAsynchronously] [-SMBiosGuid <Guid>]
 [-VMHostGroup <HostGroup>] -VMHostNetworkAdapterConfig <PhysicalComputerNetworkAdapterConfig[]>
 -VMHostProfile <PhysicalComputerProfile> [-VMMServer <ServerConnection>] [<CommonParameters>]
New-SCVMHostConfig [-BMCAddress <String>] [-BMCCustomConfigurationProvider <ConfigurationProvider>]
 [-BMCPort <Int32>] [-BMCProtocol <OutOfBandManagementType>] [-BMCRunAsAccount <RunAsAccount>]
 [-BootDiskVolume <String>] -Computer <ClientObject> [-ComputerName <String>] [-Description <String>]
 [-JobVariable <String>] [-PROTipID <Guid>] [-RunAsynchronously] [-VMMServer <ServerConnection>]
 [<CommonParameters>]
New-SCVMHostConfig [-BootDiskVolume <String>] [-BypassADMachineAccountCheck] -ComputerName <String>
 [-Description <String>] [-JobVariable <String>] [-PROTipID <Guid>] [-RunAsynchronously] [-SMBiosGuid <Guid>]
 [-SkipBmcPowerControl] [-VMHostGroup <HostGroup>]
 -VMHostNetworkAdapterConfig <PhysicalComputerNetworkAdapterConfig[]> -VMHostProfile <PhysicalComputerProfile>
 [-VMMServer <ServerConnection>] [<CommonParameters>]

Description

The New-SCVMHostConfig cmdlet has been deprecated. Use the New-SCPhysicalComputerConfig cmdlet.

Examples

Example 1:

PS C:\> # This cmdlet has been deprecated. Use New-SCPhysicalComputerConfig.

Parameters

-BMCAddress

Specifies, or updates, the out-of-band baseboard management controller (BMC) address for a specific physical machine. This might be an IP address, the fully qualified domain name (FQDN), or the DNS prefix (which is usually the same name as the NetBIOS name).

Typically, the BMC address and its connection to the network are separate from the IP address associated with a standard network adapter. Alternatively, some computers do use a standard network adapter to provide a single address for the BMC and for the network adapter. However, the BMC address has a unique port and is thus uniquely identifiable on the network.

Example IPv4 format: -BMCAddress "10.0.0.21"

Example Ipv6 format: -BMCAddress "2001:4898:2a:3:657b:9c7a:e1f0:6829"

Example FQDN format: -BMCAddress "Computer01.Contoso.com"

Example NetBIOS format: -BMCAddress "Computer01"

Note: By default, VMM uses an IP address or FQDN for the BMCAddress. However, it is also possible to create a Windows PowerShell module that enables you to specify other types of addresses as the BMC address.

Type:String
Required:True
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-BMCCustomConfigurationProvider

Specifies, or updates, a configuration provider object for a baseboard management controller (BMC). A configuration provider is a plug-in to VMM that translates VMM PowerShell commands to API calls that are specific to a type of baseboard management controller. This parameter should be used with the Custom BMCProtocol.

Type:ConfigurationProvider
Required:False
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-BMCPort

Specifies, or updates, the out-of-band baseboard management controller (BMC) port for a specific physical machine. A BMC port is also known as a service processor port. Example default ports are 623 for IPMI and 443 for SMASH over WS-Man.

Type:Int32
Required:False
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-BMCProtocol

Specifies, or updates, the protocol that VMM uses to communicate with the out-of-band baseboard management controller (BMC). Valid values are: IPMI, SMASH, Custom.

A BMC (also known as a service processor or management controller) is a specialized controller on the motherboard of a server that acts an interface between the hardware and system management software. If the motherboard of a physical machine includes a BMC, when the machine is plugged in (whether it is powered off or powered on, and whether or not an operating system is installed), information about system hardware and the state of that system hardware health is available.

Example format: -BMCProtocol "Custom"

Note: The Custom protocol requires that you use the BMCCustomConfigurationProvider parameter.

Type:OutOfBandManagementType
Parameter Sets:None, IPMI, SMASH, Custom, None, IPMI, SMASH, Custom
Required:True
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-BMCRunAsAccount

Specifies the Run As account to use with the baseboard management controller (BMC) device.

Type:RunAsAccount
Required:True
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-BootDiskVolume

Specifies a physical hard disk object for a physical machine.

Type:String
Required:False
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-BypassADMachineAccountCheck

Indicates that this cmdlet reuses a computer account that already exists in Active Directory. By default, New-SCVMHostConfig checks Active Directory for an existing account with the specified name to prevent overwriting computer accounts.

Type:SwitchParameter
Required:False
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-Computer

Typically, the BMC address and its connection to the network are separate from the IP address associated with a standard network adapter. Alternatively, some computers do use a standard network adapter to provide a single address for the BMC and for the network adapter. However, the BMC address has a unique port and is thus uniquely identifiable on the network.

Example IPv4 format: -BMCAddress "10.0.0.21"

Example Ipv6 format: -BMCAddress "2001:4898:2a:3:657b:9c7a:e1f0:6829"

Example FQDN format: -BMCAddress "Computer01.Contoso.com"

Example NetBIOS format: -BMCAddress "Computer01"

Note: By default, VMM uses an IP address or FQDN for the BMCAddress. However, it is also possible to create a Windows PowerShell module that enables you to specify other types of addresses as the BMC address.

Type:ClientObject
Required:True
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-ComputerName

Specifies the name of a computer that VMM can uniquely identify on your network. The acceptable values for this parameter are:

- FQDN

  • IPv4 or IPv6 address
  • NetBIOS name

Type:String
Required:True
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-Description

Specifies a description for the host configuration.

Type:String
Required:False
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-JobVariable

Specifies that job progress is tracked and stored in the variable named by this parameter.

Type:String
Required:False
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-PROTipID

Specifies the ID of the Performance and Resource Optimization tip (PRO tip) that triggered this action. This parameter lets you audit PRO tips.

Type:Guid
Required:False
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-RunAsynchronously

Indicates that the job runs asynchronously so that control returns to the command shell immediately.

Type:SwitchParameter
Required:False
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-SMBiosGuid

Specifies the System Management BIOS globally unique identifier (SMBIOS GUID) for a physical computer that is associated with a record for that physical computer in VMM.

SMBIOS defines data structures and access methods that enable a user or application to store and retrieve information about hardware on this computer, such as the name of the system, manufacturer, or the system BIOS version. Windows gets SMBIOS data at system startup and makes that data available to programs.

Type:Guid
Required:False
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-SkipBmcPowerControl

Skips BMC information and deploys an operating system without powering the computer on or off by using its BMC interface.

Type:SwitchParameter
Required:True
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-VMHostGroup

Specifies a virtual machine host group object.

Type:HostGroup
Required:False
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-VMHostNetworkAdapterConfig

Specifies an array of host network adapter configuration objects.

Type:PhysicalComputerNetworkAdapterConfig[]
Required:True
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-VMHostProfile

Specifies a virtual machine host profile object.

Type:PhysicalComputerProfile
Required:True
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
-VMMServer

Specifies a VMM server object.

Type:ServerConnection
Required:False
Position:Named
Default value:None
Accept pipeline input:True (ByValue)
Accept wildcard characters:False