Configure HTTP Access to Analysis Services on Internet Information Services (IIS) 7.0
You can enable HTTP access to Analysis Services by configuring MSMDPUMP.dll, an ISAPI extension that runs in Internet Information Services (IIS) and pumps data to and from client applications and an Analysis Services server. This approach provides an alternative means for connecting to Analysis Services when your BI solution calls for the following capabilities:
Client access is over Internet or extranet connections, with restrictions on which ports can be enabled.
Client connections are from non-trusted domains in the same network.
Client application runs in a network environment that allows HTTP but not TCP/IP connections.
Authentication methods other than Windows integrated security are required. Specifically, you can use Anonymous connections and Basic authentication when configuring Analysis Services for HTTP access. Digest, Forms, and ASP.NET authentication are not supported.
Client applications cannot use the Analysis Services client libraries (for example, a Java application running on a UNIX server). If you cannot use the Analysis Services client libraries for data access, you can use SOAP and XML/A over a direct HTTP connection to an Analysis Services instance.
This topic explains how to set up HTTP access to an Analysis Services instance using IIS 7.0. These instructions are valid for any supported version or edition of an Analysis Services instance that interfaces with IIS 7.0, including SQL Server 2012, SQL Server 2008 R2, SQL Server 2008, and SQL Server 2005. HTTP access is supported for both tabular mode and multidimensional mode servers.
Support for authentication methodologies varies for client and server applications across the BI stack. For more information about that scenarios enabled via HTTP access to Analysis Services, see Microsoft BI Authentication and Identity Delegation.
This topic includes the following sections:
Copy the MSMDPUMP.dll to a folder on the Web server
Create an application pool and virtual directory in IIS
Configure IIS authentication and add the extension
Edit the MSMDPUMP.INI file to set the target server
Test your configuration
MSMDPUMP is an ISAPI extension that loads into IIS and provides redirection to an Analysis Services instance that is on the same computer or a remote computer within the same domain. By configuring this ISAPI extension, you create an HTTP endpoint to an Analysis Services instance.
You must create and configure one virtual directory for each HTTP endpoint. Each endpoint will need its own set of MSMDPUMP files, for each Analysis Services instance you want to connect to. A configuration file in this file set specifies the name of the Analysis Services instance used for each HTTP endpoint.
On IIS, MSMDPUMP connects to Analysis Services using the Analysis Services OLE DB provider over TCP/IP. Both Analysis Services and IIS must be in the same domain or in trusted domains in order for the native connection to succeed.
When MSMDPUMP connects to Analysis Services, it does so under a Windows user identity. This account will either be the Anonymous account if you configured the virtual directory for anonymous connections, or a Windows user account. The account must have the appropriate data access rights on the Analysis Services server and database.
Remember to unblock the ports in Windows Firewall to allow client connections to a remote Analysis Services server. For more information, see Configure Windows Firewall to Allow Analysis Services Access.
The following table lists additional considerations when you enable HTTP access for different scenarios.
IIS and Analysis Services on the same computer
This is the simplest configuration because it allows you to use the default configuration (where the server name is localhost), the local Analysis Services OLE DB provider, and Windows integrated security with NTLM. Assuming that the client is also in the same domain, authentication is transparent to the user, with no additional work on your part.
IIS and Analysis Services on different computers
For this topology, you must install the Analysis Services OLE DB provider on the web server. You must also edit the msmdpump.ini file to specify the location of Analysis Services instance on the remote computer.
This topology adds a double-hop authentication step, where credentials must flow from the client to the web server, and on to the backend Analysis Services server. If you are using Windows credentials and NTLM, you will get an error because NTLM does not allow delegation of client credentials to a second server. The most common solution is to use Basic authentication with Secure Sockets Layer (SSL), but this will require users to provide a user name and password when accessing the MSMDPUMP virtual directory. A more straightforward approach might be to enable Kerberos and configure Analysis Services constrained delegation so that users can access Analysis Services in a transparent manner.
Consider which ports to unblock in Windows Firewall. You will need to unblock ports on both servers to allow access to the web application on IIS, and to Analysis Services on a remote server.
Client connections are from a non-trusted domain or an extranet connection
Client connections from a non-trusted domain introduce further restrictions on authentication. By default, Analysis Services uses Windows integrated authentication, which requires users to be on the same domain as the server. If you have Extranet users who connect to IIS from outside the domain, those users will get a connection error if the server is configured to use the default settings.
Workarounds include having Extranet users connect through a VPN using domain credentials. However, a better approach might be to enable Basic authentication and SSL on your IIS web site.
On the IIS web server, be sure to install the Analysis Services OLE DB provider (MSOLAP) for SQL Server 2012. You can download the provider from the SQL Server 2012 Feature Pack.
Step 1: Copy the MSMDPUMP files to a folder on the Web server
Each HTTP endpoint that you create must have its own set of MSMDPUMP files. In this step, you copy the MSMDPUMP executable, configuration file, and resource files from the Analysis Services program folders to a new virtual directory folder that you will create on the file system of the computer running IIS.
The drive must be formatted for the NTFS file system. The path to the folder that you create must not contain any spaces.
Find the files that you need to copy: MSMDPUMP.DLL, MSMDPUMP.INI, and a Resources folder containing language resource files. These files can be found at <drive>:\Program Files\Microsoft SQL Server\<instance>\OLAP\bin\isapi.
Note that the format of the instance name has changed in recent releases of SQL Server. If you are using SQL Server 2012, the default instance name is MSAS11.MSSQLSERVER.
Copy all of the files inside the \OLAP\bin\isapi folder, including the contents of the Resources subfolder.
On the web server, create a new folder: <drive>:\inetpub\wwwroot\OLAP
Paste the files that you previously copied into this new folder.
Verify that the \inetpub\wwwroot\OLAP folder on your web server contains the following: MSMDPUMP.DLL, MSMDPUMP.INI, and a Resources folder. Your folder structure should look like this:
Step 2: Create an application pool and virtual directory in IIS
Next, create an application pool and virtual directory that provides an endpoint to the pump.
Create an application pool
Start IIS Manager. Click Start, point to Run, and then type Inetmgr.
Right-click Application Pools and then click Add Application Pool. Create an application pool named OLAP, using .NET Framework v2.0.50727, with Managed pipeline mode set to Classic.
By default, IIS creates application pools using Network Service as the security identity. To change the identity of the application pool you just created, right-click OLAP, and then select Advanced Settings.
In Identity, click the built-in account that IIS specified. Depending on the version of Windows that you are using, this is either Network Service (shown in the screenshot) or ApplicationPoolIdentity. Click the Change button for this property to replace the built-in account with the custom account you want to use.
By default, on a 64-bit operating system, IIS sets the Enable 32-bit Applications property to false. If you copied msmdpump.dll from a 64-bit installation of Analysis Services, this is the correct setting for the MSMDPUMP extension on a 64-bit IIS server. If you copied the MSMDPUMP binaries from a 32-bit installation, set it to true. Check this property now to ensure it is set correctly.
Create a virtual directory
In IIS Manager, open Sites, right-click Default Web Site (or whatever web site you are using to access the pump), and then click Add Virtual Directory.
In Alias, type OLAP.
In Physical Path, click the browse button and navigate to C:\inetpub\wwwroot\OLAP. Click OK.
Right-click the OLAP virtual directory you just created, and then click Convert to Application.
In the Add Application dialog box, next to Application Pool, click Select and then choose the OLAP application pool that you created in the previous section.
Click OK twice to accept the changes, and to convert the application.
Step 3: Configure IIS authentication and add the extension
In this step, you further configure the SSAS virtual directory you just created. You will specify an authentication method and then add a script map. Supported authentication methods for Analysis Services over HTTP include:
Windows authentication (Kerberos or NTLM)
Anonymous authentication is often used during initial testing because its ease of configuration helps you to quickly validate HTTP connectivity to Analysis Services. In just a few steps, you can assign a unique user account as the identity, grant that account permissions in Analysis Services, use the account to verify data access in a client application, and then disable Anonymous authentication when testing is complete.
You can also use Anonymous authentication in a production environment if your users do not have Windows user accounts, but follow best practices by locking down permissions on the host system, as called out in this article: Enable Anonymous Authentication (IIS 7). Be sure that authentication is set on the virtual directory, and not on the parent web site, to further reduce the level of account access.
When Anonymous is enabled, any user connection to the HTTP endpoint is allowed to connect as the anonymous user. You won’t be able to audit individual user connections, nor use the user identity to select data from a model. As you can see, using Anonymous impacts everything from model design, to data refresh and access. However, if users do not have a Windows user login to start with, using the Anonymous account might be your only option.
Windows authentication is considered the most secure, and leverages existing infrastructure for networks that use Active Directory. To use Windows authentication effectively, all browsers, client applications, and server applications must support it. This is the most secure and recommended mode, but it requires that IIS be able to access a Windows domain controller that can authenticate the identity of the user requesting a connection.
For topologies that put Analysis Services and IIS on different computers, you will need to address double-hop issues that arise when a user identity needs to be delegated to a second service on a remote machine, typically by enabling Analysis Services for Kerberos constrained delegation. For more information, see Configure Analysis Services for Kerberos constrained delegation.
Basic authentication is used when you have Windows identities, but user connections are from non-trusted domains, prohibiting the use of delegated or impersonated connections. Basic authentication lets you specify a user identity and password on a connection string. Instead of using the security context of the current user, credentials on the connection string are used to connect to Analysis Services. Because Analysis Services supports only Windows authentication, any credentials passed to it must be a Windows user or group that is a member of the domain in which Analysis Services is hosted.
Set the authentication type and add a script map
In IIS Manager, open Sites, open Default Web Site, and then select the OLAP virtual directory.
Double-click Authentication in the IIS section of the main page.
Enable Windows Authentication if you are using Windows integrated security.
Alternatively, enable Basic Authentication if your client and server applications are in different domains. This mode requires the user to enter a user name and password. The user name and password are transmitted over the HTTP connection to IIS. IIS will try to impersonate the user using the provided credentials when connecting to MSMDPUMP, but the credentials will not be delegated to Analysis Services. Instead, you will need to pass a valid user name and password on a connection, as described in Step 6 in this document.
Please note that it is imperative for anyone building a system where the password is transmitted to have ways of securing the communication channel. IIS provides a set of tools that help you secure the channel. For more information, see How to Set Up SSL on IIS 7.
Disable Anonymous Authentication if you are using Windows or Basic authentication. When Anonymous authentication is enabled, IIS will always use it first, even if other authentication methods are enabled.
Under Anonymous authentication, the pump (msmdpump.dll) runs as the user account you established for anonymous user. There is no distinction between the user connecting to IIS and the user connecting to Analysis Services. By default, IIS uses the IUSR account, but you can change it to a domain user account that has network permissions. You’ll need this capability if IIS and Analysis Services are on different computers.
For instructions on how to configure credentials for Anonymous authentication, see Anonymous Authentication.
Anonymous authentication is most likely found in an extremely controlled environment, where users are given or denied access by way of access control lists in the file system. For best practices, see Enable Anonymous Authentication (IIS 7).
Click the OLAP virtual directory to open the main page. Double-click Handler Mappings.
Right-click anywhere on the page and then select Add Script Map. In the Add Script Map dialog box, specify *.dll as the request path, specify c:\inetpub\wwwroot\OLAP\msmdpump.dll as the executable, and type OLAP as the name.
Click Request Restrictions.
On the Verbs tab, verify that All verbs is selected. Click OK, and then click OK again to finish adding the script mapping.
When prompted to allow the ISAPI extension, click Yes.
Step 4: Edit the MSMDPUMP.INI file to set the target server
The MSMDPUMP.INI file specifies the Analysis Services instance that MSMDPUMP.DLL connects to. This instance can be local or remote, installed as the default or as a named instance.
Open the msmdpump.ini file located in folder C:\inetpub\wwwroot\OLAP and take a look at the contents of this file. It should look like the following:
<ConfigurationSettings> <ServerName>localhost</ServerName> <SessionTimeout>3600</SessionTimeout> <ConnectionPoolSize>100</ConnectionPoolSize> </ConfigurationSettings>
If the Analysis Services instance for which you are configuring HTTP access is located on the local computer and installed as a default instance, there is no reason to change this setting. Otherwise, you must specify the server name (for example, <ServerName>ADWRKS-SRV01</ServerName>). For a server that is installed as a named instance, be sure to append the instance name (for example, <ServerName>ADWRKS-SRV01\Tabular</ServerName>).
By default, Analysis Services listens on TCP/IP port 2383. If you installed Analysis Services as the default instance, you do not need to specify any port in <ServerName> because Analysis Services knows how to listen on port 2383 automatically. However, you do need to allow inbound connections to that port in Windows Firewall. For more information, see Configure Windows Firewall to Allow Analysis Services Access.
If you configured a named or default instance of Analysis Services to listen on a fixed port, you must add the port number to the server name (for example, <ServerName>AW-SRV01:55555</ServerName>) and you must allow inbound connections in Windows Firewall to that port.
Step 5: Grant data access permissions
As previously noted, you will need to grant data access permissions on the Analysis Services instance. Each database object will have roles that provide a given level of permissions (read or read/write), and each role will have members consisting of Windows user identities.
To set permissions, you can use SQL Server Management Studio. Under the Database | Roles folder, you can create roles, specify database permissions, assign membership to Windows user or group accounts, and then grant read or write permissions on specific objects. Typically, Read permissions on a cube are sufficient for client connections that use, but do not update, model data.
Role assignment varies depending on how you configured authentication.
Add to the Membership list the account specified in Edit Anonymous Authentication Credentials in IIS. For more information, see Anonymous Authentication,
Add to the Membership list the Windows user or group accounts requesting Analysis Services data via impersonation or delegation.
Add to the Membership list the Windows user or group accounts that will be passed on the connection string.
For more information about setting permissions, see Authorizing access to objects and operations (Analysis Services).
Step 6: Test your configuration
The connection string syntax for MSMDPUMP is the URL to the MSMDPUMP.dll file.
If the web application is listening on a fixed port, append the port number to the server name or IP address (for example, http://my-web-srv01:8080/OLAP/msmdpump.dll or http://123.456.789.012:8080/OLAP/msmdpump.dll.
To quickly test the connection, you can open a connection using Microsoft Excel or SQL Server Management Studio.
Test connections using Excel
On the Data tab in Excel, in Get External Data, click From Other Sources, and then choose From Analysis Services to start the Data Connection wizard.
In Server name, enter the HTTP address of the msmdpump extension: http://my-web-srv01/OLAP/msmdpump.dll.
For Log on credentials, choose Use Windows Authentication if you are using Windows integrated security or NTLM, or Anonymous user.
For Basic authentication, choose Use the following User Name and Password, and then specify the credentials used to sign on. The credentials you provide will be passed on the connection string to Analysis Services.
Test connections using SQL Server Management Studio
In Management Studio, in the Connect to Server dialog box, select Analysis Services as the server type. In Server name, enter the HTTP address of the msmdpump extension: http://my-web-srv01/OLAP/msmdpump.dll.
Authentication must be Windows authentication, and the person using Management Studio must be an Analysis Services administrator.
Test connections using AMO
You can test HTTP access programmatically using AMO, substituting the URL of the endpoint for the server name. For details, see Forum Post (How to sync SSAS 2008 R2 databases via HTTPS across domain/forest and firewall boundaries).
An example connection string illustrating the syntax for HTTP(S) access using Basic authentication:
Data Source=https://<servername>/olap/msmdpump.dll; Initial Catalog=AdventureWorksDW2012; Integrated Security=Basic; User ID=XXXX; Password=XXXXX;
For more information about setting up the connection programmatically, see Establishing Secure Connections in ADOMD.NET.
As a final step, be sure to follow-up with more rigorous testing by using a client computer that runs in the network environment from which the connections will originate.