Prerequisites for the Storage Device Block Driver Benchmark Test
Other versions of this page are also available for the following:
.gif "A hyphen indicates that the information in this topic is not relevant for this platform, or that the platform does not support the API that is listed.")
.gif "A checkmark indicates that the information in this topic is relevant for this platform, and that any API listed is also supported on this platform.")
8/27/2008
The following tables show the hardware requirement for the Storage Device Block Driver Benchmark Test.
| Requirement | Description |
|---|---|
Storage device |
A storage device that uses a memory block (DSK) device driver, for example a PCMCIA ATA disk or PC Card. |
The following table shows the software requirements for the Storage Device Block Driver Benchmark Test.
| Requirement | Description |
|---|---|
Tux.exe |
Test harness, required for test execution |
Kato.dll |
Logging engine, required for logging test data |
Rw_all.dll |
Library containing the test |
Note
When you run the Storage Device Block Driver Benchmark Test, the CETK temporarily copies files to the root directory of the target device. Before running the test, verify that there is at least 0.4 megabytes (MB) of free space in the root directory of the target device. If there is not sufficient space in the root directory of the target device, the test cannot run.