Configuring the System Pagefile of a Run-Time Image

5/10/2007

You can change the default system pagefile configuration of your run-time image in Target Designer.

To configure the system pagefile of a run-time image

  1. In Target Designer, expand the node of the Hardware Abstraction Layer (HAL) component for your configuration. This is one of the following components:

    • ACPI Multiprocessor PC
    • ACPI Uniprocessor PC
    • Advanced Configuration and Power Interface (ACPI) PC
    • Compaq SystemPro Multiprocessor or 100% Compatible
    • MPS Multiprocessor PC
    • MPS Uniprocessor PC
    • Standard PC
  2. Choose Settings. The System Settings appear in the Details Pane.

  3. Under System Pagefile, choose Show. The system pagefile settings are displayed.

  4. To enable Pagefile support, check Enable pagefile support. If this option is not enabled, other pagefile-related options are ignored. Running without a pagefile reduces the storage requirements of the operating system. Disabling pagefile support does not disable all virtual memory support. The system still pages application code in directly EXE and DLL files where necessary.

  5. Type in the values for your run-time image. The following table describes the fields.

    Field Description

    Pagefile initial size

    Size of the initial pagefile. Must be at least 2MB.

    Pagefile maximum size

    Maximum size of the pagefile in MB.

After you change the pagefile support settings, you can check dependencies and rebuild your run-time image.

  1. In Target Designer, expand the node of the Hardware Abstraction Layer (HAL) component for your configuration. This is one of the following components:

    • ACPI Multiprocessor PC
    • ACPI Uniprocessor PC
    • Advanced Configuration and Power Interface (ACPI) PC
    • Compaq SystemPro Multiprocessor or 100% Compatible
    • MPS Multiprocessor PC
    • MPS Uniprocessor PC
    • Standard PC
  2. Choose Settings. The System Settings appear in the Details Pane.

  3. Under System Pagefile, choose Show. The system pagefile settings are displayed.

  4. To enable Pagefile support, check Enable pagefile support. If this option is not enabled, other pagefile-related options are ignored. Running without a pagefile reduces the storage requirements of the operating system. Disabling pagefile support does not disable all virtual memory support. The system still pages application code in directly EXE and DLL files where necessary.

  5. Type in the values for your run-time image. The following table describes the fields.

    Field Description

    Pagefile initial size

    Size of the initial pagefile. Must be at least 2MB.

    Pagefile maximum size

    Maximum size of the pagefile in MB.

After you change the pagefile support settings, you can check dependencies and rebuild your run-time image.

See Also

Tasks

Configuring the System Identification of a Run-Time Image
Configuring the Power Management Settings of a Run-Time Image
Configuring the Data Execution Prevention Settings of a Run-Time Image

Other Resources

System Settings