Share via


Remote NDIS Messages (Windows Embedded CE 6.0)

1/6/2010

The following table shows the Remote NDIS messages with a description of the purpose of each.

Programming element Description

REMOTE_NDIS_HALT_MSG

This message is sent by the host to terminate the network connection.

REMOTE_NDIS_INDICATE_STATUS_MSG

This message is sent by a Remote NDIS device to a host to indicate a change in the status of the device.

REMOTE_NDIS_INITIALIZE_CMPLT

This message is sent by a Remote NDIS to the host in response to a REMOTE_NDIS_INITIALIZE_MSG message.

REMOTE_NDIS_INITIALIZE_MSG

This message is sent by the host to a Remote NDIS device to initialize the network connection.

REMOTE_NDIS_KEEPALIVE_CMPLT

This message is sent by a Remote NDIS device in response to a REMOTE_NDIS_KEEPALIVE_MSG message from the host.

REMOTE_NDIS_KEEPALIVE_MSG

This message is sent by the host when there has been no other control or data traffic from the device to the host for the bus defined KeepAliveTimeoutPeriod.

REMOTE_NDIS_PACKET_MSG

This message encapsulates NDIS data packets to form a single data message.

REMOTE_NDIS_QUERY_CMPLT

This message is sent by a Remote NDIS device in response to a REMOTE_NDIS_QUERY_MSG message.

REMOTE_NDIS_QUERY_MSG

This message is sent to a Remote NDIS device from a host when it needs to query the device for its characteristics, statistics information, or status.

REMOTE_NDIS_RESET_CMPLT

This message is sent by a Remote NDIS device in response to a REMOTE_NDIS_RESET_MSG message from the host.

REMOTE_NDIS_RESET_MSG

This message is sent by the host to a Remote NDIS device to reset the device and return status.

REMOTE_NDIS_SET_CMPLT

This message is sent by a Remote NDIS device responds to a REMOTE_NDIS_SET_MSG message.

REMOTE_NDIS_SET_MSG

This message is sent by the host to a Remote NDIS device when it needs to set the value of some operational parameter on the device.

See Also

Reference

Network Driver Messages