Share via

DOT11_SUPPORTED_DATA_RATES_VALUE_V2 (Compact 2013)

  • Article

3/26/2014

The DOT11_SUPPORTED_DATA_RATES_VALUE_V2 structure specifies a list of transmit and receive data rates for a PHY on the 802.11 station.

Syntax

typedef struct _DOT11_SUPPORTED_DATA_RATES_VALUE_V2 {
  UCHAR  ucSupportedTxDataRatesValue[255];
  UCHAR  ucSupportedRxDataRatesValue[255];
} DOT11_SUPPORTED_DATA_RATES_VALUE_V2, *PDOT11_SUPPORTED_DATA_RATES_VALUE_V2;

Members

  • ucSupportedTxDataRatesValue
    An array of the transmit data rates supported by the Physical Layer Convergence Procedure (PLCP) and Physical Media Dependent (PMD) sublayer of the PHY
  • ucSupportedRxDataRatesValue
    An array of the receive data rates supported by the PLCP and PMD of the PHY

Remarks

Each entry in the ucSupportedTxDataRatesValue and ucSupportedRxDataRatesValue arrays must have a data rate index value as defined for the ucDataRateIndex member of the DOT11_DATA_RATE_MAPPING_ENTRY structure. Each entry in these arrays must match a ucDataRateIndex member from the table of data rates returned through a query of OID_DOT11_DATA_RATE_MAPPING_TABLE. The index value must be between 2 and 127.

If the number of supported rates in either array is less than 255, the miniport driver must add an entry with a value of zero after the last data rate in the array. For example, if the 802.11 station supports only four transmit data rates, the miniport driver must set ucSupportedTxDataRatesValue[0..3] with the four transmit rates and set ucSupportedTxDataRatesValue[4] to zero.

Requirements

Header

windot11.h

See Also

Reference

Native 802.11 Data Types
DOT11_DATA_RATE_MAPPING_ENTRY
OID_DOT11_DATA_RATE_MAPPING_TABLE
OID_DOT11_SUPPORTED_DATA_RATES_VALUE
NDIS_MINIPORT_ADAPTER_NATIVE_802_11_ATTRIBUTES
Native 802.11 Wireless LAN Reference