Share via


lineForward (Windows CE 5.0)

Send Feedback

This function forwards calls destined for the specified address on the specified line, according to the specified forwarding instructions. When an originating address (dwAddressID) is forwarded, the specified incoming calls for that address are deflected to the other number by the switch. This function provides a combination of forward and do-not-disturb features. This function can also cancel forwarding currently in effect.

LONG WINAPI lineForward(HLINE hLine,DWORD bAllAddresses,DWORD dwAddressID,LPLINEFORWARDLIST const lpForwardList,DWORD dwNumRingsNoAnswer,LPHCALL lphConsultCall,LPLINECALLPARAMS const lpCallParams);

Parameters

  • hLine
    Handle to the line device.

  • bAllAddresses
    Value that specifies whether all originating addresses on the line or just the one specified is to be forwarded. If TRUE, all addresses on the line are forwarded and the dwAddressID parameter is ignored; if FALSE, only the address specified as dwAddressID is forwarded.

  • dwAddressID
    Address on the specified line whose incoming calls are to be forwarded. This parameter is ignored if bAllAddresses is TRUE.

    An address identifier is permanently associated with an address; the identifier remains constant across operating system upgrades.

  • lpForwardList
    Pointer to a variably sized data structure that describes the specific forwarding instructions, of type LINEFORWARDLIST.

  • dwNumRingsNoAnswer
    Number of rings before a call is considered a "no answer." If dwNumRingsNoAnswer is out of range, the actual value is set to the nearest value in the allowable range.

  • lphConsultCall
    Pointer to an HCALL location. In some telephony environments, this location is loaded with a handle to a consultation call that is used to consult the party being forwarded to, and the application becomes the initial sole owner of this call. This pointer must be valid even in environments where call forwarding does not require a consultation call. This handle is set to NULL if no consultation call is created.

  • lpCallParams
    Pointer to a structure of type LINECALLPARAMS. This pointer is ignored unless lineForward requires the establishment of a call to the forwarding destination (and lphConsultCall is returned, in which case lpCallParams is optional). If NULL, default call parameters are used. Otherwise, the specified call parameters are used for establishing hConsultCall.

Return Values

Returns a positive request identifier if the function is completed asynchronously, or a negative error number if an error occurs. The dwParam2 parameter of the corresponding LINE_REPLY message is zero if the function succeeds or it is a negative error number if an error occurs. The following table shows the return values for this function.

Value Description
LINEERR_INVALLINEHANDLE The handle to the line device is invalid.
LINEERR_NOMEM Not enough memory is available.
LINEERR_INVALADDRESSID The addressidentifier of the specified line is invalid.
LINEERR_OPERATIONUNAVAIL The operation is unavailable.
LINEERR_INVALADDRESS An address is invalid.
LINEERR_OPERATIONFAILED The operation failed.
LINEERR_INVALCOUNTRYCODE The country/region code is invalid.
LINEERR_RESOURCEUNAVAIL The resources are unavailable.
LINEERR_INVALPOINTER The pointer is invalid.
LINEERR_STRUCTURETOOSMALL The structure is too small.
LINEERR_INVALPARAM A parameter is invalid.
LINEERR_UNINITIALIZED A parameter is uninitialized.

Remarks

A successful forwarding indicates only that the request has been accepted by the service provider, not that forwarding is set up at the switch. A LINE_ADDRESSSTATE (forwarding) message provides confirmation for forwarding having been set up at the switch.

Forwarding of the addresses remains in effect until this function is called again. The most recent forwarding list replaces the old one. Forwarding can be canceled by specifying a NULL pointer as lpForwardList. If a NULL destination address is specified for an entry in the forwarding list, the operation acts as a do-not-disturb.

Forwarding status of an address can also be affected externally; for example, by administrative actions at the switch or by a user from another station. It may not be possible for the service provider to be aware of this state change, and it may not be able to keep in synchronization with the forwarding state known to the switch.

Because a service provider may not know the forwarding state of the address "for sure" (that is, it may have been forwarded or unforwarded in an unknown way), lineForward succeeds unless it fails to set the new forwarding instructions. In other words, a request that all forwarding be canceled at a time that there is no forwarding in effect is successful. This is because there is no unforwarding — you can only change the previous set of forwarding instructions.

The success or failure of this operation does not depend on the previous set of forwarding instructions, and the same is true when setting different forwarding instructions. The provider should "unforward everything" prior to setting the new forwarding instructions. Because this can take time in analog telephony environments, a provider may also want to compare the current forwarding with the new one, and only issue instructions to the switch to get to the final state (leaving unchanged forwarding unaffected).

Invoking lineForward when LINEFORWARDLIST has dwNumEntries set to zero has the same effect as providing a NULL lpForwardList parameter. It cancels all forwarding currently in effect.

Note   This function is for TAPI version 2.0 and later.

Requirements

OS Versions: Windows CE 1.0 and later.
Header: Tapi.h.
Link Library: Coredll.lib.

See Also

LINE_ADDRESSSTATE | LINE_REPLY | LINECALLPARAMS

Send Feedback on this topic to the authors

Feedback FAQs

© 2006 Microsoft Corporation. All rights reserved.