• 10/11/2017
• 64 minutes to read
• Contributors
  • 
  • 

Security Bulletin

Microsoft Security Bulletin MS12-066 - Important

Vulnerability in HTML Sanitization Component Could Allow Elevation of Privilege (2741517)

Published: October 09, 2012 | Updated: January 15, 2014

Version: 1.4

General Information

Executive Summary

This security update resolves a publicly disclosed vulnerability in Microsoft Office, Microsoft Communications Platforms, Microsoft Server software, and Microsoft Office Web Apps. The vulnerability could allow elevation of privilege if an attacker sends specially crafted content to a user.

This security update is rated Important for supported editions of Microsoft InfoPath 2007, Microsoft InfoPath 2010, Microsoft Communicator 2007 R2, Microsoft Lync 2010, Microsoft Lync 2010 Attendee, Microsoft SharePoint Server 2007, Microsoft SharePoint Server 2010, Microsoft Groove Server 2010, Microsoft SharePoint Windows Services 3.0, Microsoft SharePoint Foundation 2010, and Microsoft Office Web Apps 2010. For more information, see the subsection, Affected and Non-Affected Software, in this section.

The security update addresses the vulnerability by modifying the way that HTML strings are sanitized. For more information about the vulnerability, see the Frequently Asked Questions (FAQ) subsection under the next section, Vulnerability Information.

Recommendation. Customers can configure automatic updating to check online for updates from Microsoft Update by using the Microsoft Update service. Customers who have automatic updating enabled and configured to check online for updates from Microsoft Update typically will not need to take any action because this security update will be downloaded and installed automatically. Customers who have not enabled automatic updating need to check for updates from Microsoft Update and install this update manually. For information about specific configuration options in automatic updating in supported editions of Windows XP and Windows Server 2003, see Microsoft Knowledge Base Article 294871. For information about automatic updating in supported editions of Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2, see Understanding Windows automatic updating.

For administrators and enterprise installations, or end users who want to install this security update manually, Microsoft recommends that customers apply the update at the earliest opportunity using update management software, or by checking for updates using the Microsoft Update service.

See also the section, Detection and Deployment Tools and Guidance, later in this bulletin.

Known Issues. Microsoft Knowledge Base Article 2741517 documents the currently known issues that customers may experience when installing this security update. The article also documents recommended solutions for these issues. When currently known issues and recommended solutions pertain only to specific releases of this software, this article provides links to further articles.

Affected and Non-Affected Software

The following software have been tested to determine which versions or editions are affected. Other versions or editions are either past their support life cycle or are not affected. To determine the support life cycle for your software version or edition, see Microsoft Support Lifecycle.

Affected Software 

Microsoft Office

Microsoft Communications Platforms and Software

^[1]This update is available from the Microsoft Download Center only.

Microsoft Server Software

Microsoft Office Web Apps

HTML Sanitization Vulnerability - CVE-2012-2520

An elevation of privilege vulnerability exists in the way that HTML strings are sanitized. An attacker who successfully exploited this vulnerability could perform cross-site scripting attacks and run script in the security context of the logged-on user.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2012-2520.

Mitigating Factors for HTML Sanitization Vulnerability - CVE-2012-2520

Microsoft has not identified any mitigating factors for this vulnerability.

Workarounds for HTML Sanitization Vulnerability - CVE-2012-2520

Microsoft has not identified any workarounds for this vulnerability.

FAQ for HTML Sanitization Vulnerability - CVE-2012-2520

What is the scope of the vulnerability?
This is an elevation of privilege vulnerability.

What causes the vulnerability?
The vulnerability is caused by the way that HTML strings are sanitized.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could read content that the attacker is not authorized to read or use the victim's identity to take actions on the targeted site or application.

How could an attacker exploit the vulnerability?

To exploit this vulnerability, an attacker would have to convince a user to click a link that goes to a specially crafted URL, or send the user a specially crafted chat message.

In a web-based attack scenario, an attacker would have to host a website that contains a specially crafted URL that directs the user to the targeted SharePoint site that is used to attempt to exploit this vulnerability. In addition, compromised websites and websites that accept or host user-provided content could contain specially crafted content that could exploit this vulnerability. An attacker would have no way to force users to visit a specially crafted website. Instead, an attacker would have to convince them to visit the website, typically by getting them to click a link in an email message or Instant Messenger message that takes them to the attacker's website.

In a chat-based attack scenario, an attacker must have the ability to submit a specially crafted script to a Lync or Microsoft Communicator chat window. Because of the vulnerability, in specific situations the specially crafted script is not properly sanitized, which subsequently could lead to an attacker-supplied script being run in the security context of a user who views the malicious content.

For cross-site scripting attacks, this vulnerability requires that a user receives a specially crafted chat message for any malicious action to occur.

What systems are primarily at risk from the vulnerability?
Systems where Microsoft Lync or Microsoft Communicator are used frequently and environments where users connect to a SharePoint server are primarily at risk for this vulnerability.

What is HTML sanitization?
HTML sanitization is a process that restricts HTML to elements that can be safely displayed in a browser.

What does the update do?
The update addresses the vulnerability by modifying the way that HTML strings are sanitized.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
Yes. This vulnerability has been publicly disclosed. It has been assigned Common Vulnerability and Exposure number CVE-2012-2520.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
Yes. Microsoft is aware of limited, targeted attacks attempting to exploit the vulnerability.

Update Information

Detection and Deployment Tools and Guidance

Security Central

Manage the software and security updates you need to deploy to the servers, desktop, and mobile systems in your organization. For more information see the TechNet Update Management Center. The Microsoft TechNet Security website provides additional information about security in Microsoft products.

Security updates are available from Microsoft Update and Windows Update. Security updates are also available from the Microsoft Download Center. You can find them most easily by doing a keyword search for "security update."

Finally, security updates can be downloaded from the Microsoft Update Catalog. The Microsoft Update Catalog provides a searchable catalog of content made available through Windows Update and Microsoft Update, including security updates, drivers and service packs. By searching using the security bulletin number (such as, "MS12-001"), you can add all the applicable updates to your basket (including different languages for an update), and download to the folder of your choosing. For more information about the Microsoft Update Catalog, see the Microsoft Update Catalog FAQ.

Detection and Deployment Guidance

Microsoft provides detection and deployment guidance for security updates. This guidance contains recommendations and information that can help IT professionals understand how to use various tools for detection and deployment of security updates. For more information, see Microsoft Knowledge Base Article 961747.

Microsoft Baseline Security Analyzer

Microsoft Baseline Security Analyzer (MBSA) lets administrators scan local and remote systems for missing security updates as well as common security misconfigurations. For more information, see Microsoft Baseline Security Analyzer.

The following table provides the MBSA detection summary for this security update.

Note For customers using legacy software not supported by the latest release of MBSA, Microsoft Update, and Windows Server Update Services, please see Microsoft Baseline Security Analyzer and reference the Legacy Product Support section on how to create comprehensive security update detection with legacy tools.

Windows Server Update Services

Windows Server Update Services (WSUS) enables information technology administrators to deploy the latest Microsoft product updates to computers that are running the Windows operating system. For more information about how to deploy security updates using Windows Server Update Services, see the TechNet article, Windows Server Update Services.

Systems Management Server

The following table provides the SMS detection and deployment summary for this security update.

^[1]The detection table described above is based on single-server Microsoft Office SharePoint Server 2007 and Microsoft SharePoint Server 2010 deployments. The detection tools do not detect the applicability of the update on systems configured as part of a multiple-system SharePoint server farms.

Note Microsoft discontinued support for SMS 2.0 on April 12, 2011. For SMS 2003, Microsoft also discontinued support for the Security Update Inventory Tool (SUIT) on April 12, 2011. Customers are encouraged to upgrade to System Center Configuration Manager. For customers remaining on SMS 2003 Service Pack 3, the Inventory Tool for Microsoft Updates (ITMU) is also an option.

For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates (ITMU) can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 ITMU, see SMS 2003 Inventory Tool for Microsoft Updates. For more information about SMS scanning tools, see SMS 2003 Software Update Scanning Tools. See also Downloads for Systems Management Server 2003.

System Center Configuration Manager uses WSUS 3.0 for detection of updates. For more information, see System Center.

For more detailed information, see Microsoft Knowledge Base Article 910723: Summary list of monthly detection and deployment guidance articles.

Note If you have used an Administrative Installation Point (AIP) for deploying Office 2003, you may not be able to deploy the update using SMS if you have updated the AIP from the original baseline. For more information, see the Office Administrative Installation Point heading in this section.

Office Administrative Installation Point

If you installed your application from a server location, the server administrator must update the server location with the administrative update and deploy that update to your system.

• For supported versions of Microsoft Office 2003, see Creating an Administrative Installation Point. For more information on how to change the source for a client computer from an updated administrative installation point to an Office 2003 original baseline source or Service Pack 3 (SP3), see Microsoft Knowledge Base Article 902349.

  Note If you plan to manage software updates centrally from an updated administrative image, you can find more information in the article, Distributing Office 2003 Product Updates.

• For creating a network installation point for supported versions of Microsoft Office, see Create a network installation point for Microsoft Office.

  Note If you plan to manage security updates centrally, use Windows Server Update Services. For more information about how to deploy security updates for Microsoft Office, see the Windows Server Update Services website.

Update Compatibility Evaluator and Application Compatibility Toolkit

Updates often write to the same files and registry settings required for your applications to run. This can trigger incompatibilities and increase the time it takes to deploy security updates. You can streamline testing and validating Windows updates against installed applications with the Update Compatibility Evaluator components included with Application Compatibility Toolkit.

The Application Compatibility Toolkit (ACT) contains the necessary tools and documentation to evaluate and mitigate application compatibility issues before deploying Windows Vista, a Windows Update, a Microsoft Security Update, or a new version of Windows Internet Explorer in your environment.

Security Update Deployment

Affected Software

For information about the specific security update for your affected software, click the appropriate link:

InfoPath 2007 (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Supported Security Update Installation Switches

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

To remove this security update, use the Add or Remove Programs item in Control Panel.

Note When you remove this update, you may be prompted to insert the 2007 Microsoft Office CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs item in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.

Verifying That the Update Has Been Applied

• Microsoft Baseline Security Analyzer
  To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

• File Version Verification
  Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

  1. Click Start and then enter an update file name in the Start Search box.

  2. When the file appears under Programs, right-click the file name and click Properties.

  3. On the General tab, compare the file size with the file information tables provided in the bulletin KB article.

     Note Depending on the edition of the operating system, or the programs that are installed on your system, some files that are listed in the file information table may not be installed.

  4. You can also click the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.

     Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

  5. Finally, you can also click the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.

InfoPath 2010 (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Installing the Update

You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.

This security update requires that Windows Installer 3.1 or later version be installed on the system.

To install the 3.1 or later version of Windows Installer, visit one of the following Microsoft websites:

• Windows Installer 4.5 Redistributable for Windows Server 2008, Windows Vista, Windows Server 2003, and Windows XP
• Windows Installer 3.1 Redistributable for Windows Server 2003, Windows XP, and Microsoft Windows 2000

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

To remove this security update, use the Add or Remove Programs item in Control Panel.

Note When you remove this update, you may be prompted to insert the 2007 Microsoft Office CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs item in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.

Verifying that the Update Has Been Applied

• Microsoft Baseline Security Analyzer
  To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

• File Version Verification
  Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

  1. Click Start and then enter an update file name in the Start Search box.

  2. When the file appears under Programs, right-click the file name and click Properties.

  3. On the General tab, compare the file size with the file information tables provided in the bulletin KB article.

     Note Depending on the edition of the operating system, or the programs that are installed on your system, some files that are listed in the file information table may not be installed.

  4. You can also click the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.

     Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

  5. Finally, you can also click the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.

Microsoft Communicator 2007 R2, Microsoft Lync 2010, Microsoft Lync 2010 Attendee

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Installing the Update

You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.

This security update requires that Windows Installer 3.1 or later version be installed on the system.

To install the 3.1 or later version of Windows Installer, visit one of the following Microsoft websites:

• Windows Installer 4.5 Redistributable for Windows Server 2008, Windows Vista, Windows Server 2003, and Windows XP
• Windows Installer 3.1 Redistributable for Windows Server 2003, Windows XP, and Microsoft Windows 2000

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

This security update cannot be removed.

Verifying That the Update Has Been Applied

• Microsoft Baseline Security Analyzer
  To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

• File Version Verification
  Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

  1. Click Start and then enter an update file name in the Start Search box.
  2. When the file appears under Programs, right-click the file name and click Properties.
  3. On the General tab, compare the file size with the file information tables provided in the bulletin KB article.
  4. You can also click the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.
  5. Finally, you can also click the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.

SharePoint Server 2010 (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Supported Security Update Installation Switches

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

This security update cannot be removed.

Verifying That the Update Has Been Applied

• Microsoft Baseline Security Analyzer
  To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

• File Version Verification
  Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

  1. Click Start and then enter an update file name in Start Search.
  2. When the file appears under Programs, right-click on the file name and click Properties.
  3. Under the General tab, compare the file size with the file information tables provided in the bulletin KB article.
  4. You may also click on the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.
  5. Finally, you may also click on the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.

Groove Server 2010 (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Supported Security Update Installation Switches | Switch | Description |
|--------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------|
| /?, /h, /help | Displays help on supported switches. |
| /quiet | Suppresses the display of status or error messages. |
| /norestart | When combined with /quiet, the system will not be restarted after installation even if a restart is required to complete installation. |
| /warnrestart:<seconds> | When combined with /quiet, the installer will warn the user before initiating restart. |
| /promptrestart | When combined with /quiet, the installer will prompt before initiating restart. |
| /forcerestart | When combined with /quiet, the installer will forcefully close applications and initiate restart. |
| /log:<file name> | Enables logging to specified file. |
| /extract:<destination> | Extracts the package contents to the destination folder. |
| /uninstall /kb:<KB Number> | Uninstalls the security update. |

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

This security update cannot be removed.

Verifying That the Update Has Been Applied

• Microsoft Baseline Security Analyzer
  To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

• File Version Verification
  Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

  1. Click Start and then enter an update file name in the Start Search box.
  2. When the file appears under Programs, right-click the file name and click Properties.
  3. On the General tab, compare the file size with the file information tables provided in the bulletin KB article.
  4. You can also click the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.
  5. Finally, you can also click the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.

Windows SharePoint Services 3.0 (all versions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Supported Security Update Installation Switches | Switch | Description |
|---------------------------|---------------------------------------------------------------------------------------------------------------------|
| /? or /help | Displays usage dialog. |
| /passive | Specifies passive mode. Requires no user interaction; users see basic progress dialogs but cannot cancel. |
| /quiet | Specifies quiet mode, or suppresses prompts, when files are being extracted. |
| /norestart | Suppresses restarting the system if the update requires a restart. |
| /forcerestart | Automatically restarts the system after applying the update, regardless of whether the update requires the restart. |
| /extract | Extracts the files without installing them. You are prompted for a target folder. |
| /extract:<path> | Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file. |
| /lang:<LCID> | Forces the use of a specific language, when the update package supports that language. |
| /log:<log file> | Enables logging, by both Vnox and Installer, during the update installation. |

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

This security update cannot be removed.

Verifying That the Update Has Been Applied

• Microsoft Baseline Security Analyzer
  To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

• File Version Verification
  Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

  1. Click Start and then enter an update file name in Start Search.
  2. When the file appears under Programs, right-click on the file name and click Properties.
  3. Under the General tab, compare the file size with the file information tables provided in the bulletin KB article.
  4. You may also click on the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.
  5. Finally, you may also click on the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.

Microsoft SharePoint Foundation 2010 (all versions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Supported Security Update Installation Switches | Switch | Description |
|---------------------------|---------------------------------------------------------------------------------------------------------------------|
| /? or /help | Displays usage dialog. |
| /passive | Specifies passive mode. Requires no user interaction; users see basic progress dialogs but cannot cancel. |
| /quiet | Specifies quiet mode, or suppresses prompts, when files are being extracted. |
| /norestart | Suppresses restarting the system if the update requires a restart. |
| /forcerestart | Automatically restarts the system after applying the update, regardless of whether the update requires the restart. |
| /extract | Extracts the files without installing them. You are prompted for a target folder. |
| /extract:<path> | Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file. |
| /lang:<LCID> | Forces the use of a specific language, when the update package supports that language. |
| /log:<log file> | Enables logging, by both Vnox and Installer, during the update installation. |

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

This security update cannot be removed.

Verifying That the Update Has Been Applied

• Microsoft Baseline Security Analyzer
  To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

• File Version Verification
  Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

  1. Click Start and then enter an update file name in Start Search.
  2. When the file appears under Programs, right-click on the file name and click Properties.
  3. Under the General tab, compare the file size with the file information tables provided in the bulletin KB article.
  4. You may also click on the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.
  5. Finally, you may also click on the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.

Office Web Apps 2010 (all versions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Supported Security Update Installation Switches | Switch | Description |
|---------------------------|---------------------------------------------------------------------------------------------------------------------|
| /? or /help | Displays usage dialog. |
| /passive | Specifies passive mode. Requires no user interaction; users see basic progress dialogs but cannot cancel. |
| /quiet | Specifies quiet mode, or suppresses prompts, when files are being extracted. |
| /norestart | Suppresses restarting the system if the update requires a restart. |
| /forcerestart | Automatically restarts the system after applying the update, regardless of whether the update requires the restart. |
| /extract | Extracts the files without installing them. You are prompted for a target folder. |
| /extract:<path> | Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file. |
| /lang:<LCID> | Forces the use of a specific language, when the update package supports that language. |
| /log:<log file> | Enables logging, by both Vnox and Installer, during the update installation. |

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Verifying That the Update Has Been Applied

• Microsoft Baseline Security Analyzer
  To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

• File Version Verification
  Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

  1. Click Start and then enter an update file name in the Start Search box.
  2. When the file appears under Programs, right-click the file name and click Properties.
  3. On the General tab, compare the file size with the file information tables provided in the bulletin KB article.
  4. You can also click the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.
  5. Finally, you can also click the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.

Other Information

Acknowledgments

Microsoft thanks the following for working with us to help protect customers:

• Drew Hintz and Andrew Lyons of Google Security Team for reporting the HTML Sanitization Vulnerability (CVE-2012-2520)

Microsoft Active Protections Program (MAPP)

To improve security protections for customers, Microsoft provides vulnerability information to major security software providers in advance of each monthly security update release. Security software providers can then use this vulnerability information to provide updated protections to customers via their security software or devices, such as antivirus, network-based intrusion detection systems, or host-based intrusion prevention systems. To determine whether active protections are available from security software providers, please go to the active protections websites provided by program partners, listed in Microsoft Active Protections Program (MAPP) Partners.

Support

How to obtain help and support for this security update

• Help installing updates: Support for Microsoft Update
• Security solutions for IT professionals: TechNet Security Troubleshooting and Support
• Help protect your computer that is running Windows from viruses and malware: Virus Solution and Security Center
• Local support according to your country: International Support

Disclaimer

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions

• V1.0 (October 9, 2012): Bulletin published.
• V1.1 (October 10, 2012): Corrected KB numbers for Microsoft Lync 2010 Attendee (admin level install) and Microsoft Lync 2010 Attendee (user level install). This is an informational change only. Customers who have already successfully updated their systems do not need to take any action.
• V1.2 (October 17, 2012): Corrected update replacement information. Corrected KB numbers for Microsoft Lync 2010 Attendee (admin level install) and Microsoft Lync 2010 Attendee (user level install). These are informational changes only. Customers who have already successfully updated their systems do not need to take any action.
• V1.3 (October 23, 2012): Added Microsoft Windows SharePoint Services 3.0 Service Pack 3 (32-bit version) and Microsoft Windows SharePoint Services 3.0 Service Pack 3 (64-bit version) to the Affected Software section. This is a bulletin change only. There were no changes to the detection logic or security update files.
• V1.4 (January 15, 2014): Bulletin revised to announce a detection change in update 2687356 (a.k.a. 2687442). This is a detection change only. Customers who have already successfully updated their systems do not need to take any action. Note that update 2687356 is offered through Microsoft Update as update 2687442.

Built at 2014-04-18T13:49:36Z-07:00