Database Engine events and errors (28000 to 30999)

This article contains error message numbers (between the range 28000 and 30999) and their description, which is the text of the error message from the sys.messages catalog view. Where applicable, the error number is a link to further information.

For the full range of error numbers, see the list on Database Engine events and errors.

You can query the Database Engine to see a full list of all errors, by running the following query against the sys.messages catalog view:

SELECT message_id AS Error,
    severity AS Severity,
    [Event Logged] = CASE is_event_logged
        WHEN 0 THEN 'No' ELSE 'Yes'
        END,
    [text] AS [Description]
FROM sys.messages
WHERE language_id = 1040 /* replace 1040 with the desired language ID, such as 1033 for US English */
ORDER BY message_id;

SQL Server version

This article shows events and errors (between the range 28000 and 30999) for SQL Server 2022 (16.x). If you want to view events and errors for other versions of SQL Server, see:

• SQL Server 2019
• SQL Server 2017
• SQL Server 2016

Errors and events (28000 to 30999)

Error	Severity	Event logged	Description
28000	16	No	The decrypted session key has an unexpected size.
28001	16	No	A corrupted message has been received. It contains invalid flags. This occurred in the message with Conversation ID '%.*ls', Initiator: %d, and Message sequence number: %I64d.
28002	16	No	Cannot start service broker manager. Operating system error: %ls.
28003	16	No	An internal service broker error occurred. Operating system error: %ls.
28004	16	No	This message could not be delivered because the '%S_MSG' action cannot be performed in the '%.*ls' state.
28005	16	No	An exception occurred while enqueueing a message in the target queue. Error: %d, State: %d. %.*ls
28006	14	No	User does not have permission to %S_MSG the conversation '%.*ls' in state '%.*ls'. Only members of the sysadmin fixed server role and the db_owner fixed database role have this permission.
28007	16	No	A corrupted message has been received. The highest seen message number must be greater than the acknowledged message number. This occurred in the message with Conversation ID '%.*ls', Initiator: %d, and Message sequence number: %I64d.
28008	16	No	The conversation handle '{%.8x-%.4x-%.4x-%.2x%.2x-%.2x%.2x%.2x%.2x%.2x%.2x}' is invalid.
28009	16	No	The crypto API has detected bad data while trying to perform a decryption operation.
28010	16	No	This message could not be delivered because it contains an invalid acknowledged message number. Highest expected message number: %I64d. Acknowledged message number: %I64d, fragment number: %d.
28011	16	No	This message could not be delivered because its %S_MSG has expired or is invalid.
28012	16	No	The Service Broker in the target database is unavailable: '%S_MSG'.
28013	16	No	The service broker is administratively disabled.
28014	16	No	The database is in read-only mode.
28015	16	No	The database is in single-user mode.
28016	16	No	The message has been dropped because the service broker in the target database is unavailable: '%S_MSG'.
28017	16	No	The message has been dropped because the target service broker is unreachable.
28018	16	No	The database is a replica of a mirrored database.
28019	16	No	System error %d occurred while creating a new message element GUID for this forwarded message.
28020	16	No	Could not create user token for user %d in database %d.
28021	16	No	One or more messages could not be delivered to the local service targeted by this dialog.
28022	10	No	An error occurred while looking up the public key certificate associated with this SQL Server instance: The certificate is not yet valid.
28023	10	No	An error occurred while looking up the public key certificate associated with this SQL Server instance: The certificate has expired.
28024	16	Yes	The security certificate bound to database principal (Id: %i) is not yet valid. Either wait for the certificate to become valid or install a certificate that is currently valid.
28025	16	Yes	The security certificate bound to database principal (Id: %i) has expired. Create or install a new certificate for the database principal.
28026	10	No	Connection handshake failed. Not enough memory available. State %d.
28027	10	No	Connection handshake failed. There is no compatible %S_MSG. State %d.
28028	10	No	Connection handshake failed. Could not send a handshake message because the connection was closed by peer. State %d.
28029	10	No	Connection handshake failed. Unexpected event (%d) for current context (%d). State %d.
28030	10	No	Connection handshake failed. A call to the SQL Server Network Interface failed: (%x) %ls. State %d.
28031	10	No	Connection handshake failed. An OS call failed: (%x) %ls. State %d.
28032	10	No	A previously existing connection with the same peer was detected during connection handshake. This connection lost the arbitration and it will be closed. All traffic will be redirected to the previously existing connection. This is an informational message only. No user action is required. State %d.
28033	10	No	A new connection was established with the same peer. This connection lost the arbitration and it will be closed. All traffic will be redirected to the newly opened connection. This is an informational message only. No user action is required. State %d.
28034	10	No	Connection handshake failed. The login '%.*ls' does not have CONNECT permission on the endpoint. State %d.
28035	10	No	Connection handshake failed. The certificate used by the peer is invalid due to the following reason: %S_MSG. State %d.
28036	10	No	Connection handshake failed. The certificate used by this endpoint was not found: %S_MSG. Use DBCC CHECKDB in master database to verify the metadata integrity of the endpoints. State %d.
28037	10	No	Connection handshake failed. Error %d occurred while initializing the private key corresponding to the certificate. The SQL Server errorlog and the operating system error log may contain entries related to this error. State %d.
28038	10	No	Connection handshake failed. The handshake verification failed. State %d.
28039	10	No	Connection handshake failed. The receive SSPI packet is not of type of the negotiated package. State %d.
28040	10	No	A corrupted message has been received. The adjacent error message header is invalid.
28041	16	No	A corrupted message has been received. The encrypted payload offset is invalid (%d).
28042	16	No	A corrupted message has been received. The arbitration request header is invalid.
28043	16	No	A corrupted message has been received. The arbitration response header is invalid.
28044	16	No	A corrupted message has been received. It is not encrypted and signed using the currently configured endpoint algorithm. This occurred in the message with Conversation ID '%.*ls', Initiator: %d, and Message sequence number: %I64d.
28045	10	No	Connection handshake failed. The certificate used by the peer does not match the one in master database with same issuer name and serial number. State %d.
28046	10	Yes	%S_MSG Login succeeded for user '%.*ls'. Authentication mode: %.*ls. %.*ls
28047	10	Yes	%S_MSG login attempt failed with error: '%.*ls'. %.*ls
28048	10	Yes	%S_MSG login attempt by user '%.*ls' failed with error: '%.*ls'. %.*ls
28049	16	No	A corrupted message has been received. The proxy connect message header is invalid.
28050	10	No	The session keys for this conversation could not be created or accessed. The database master key is required for this operation.
28051	10	No	Could not save a dialog session key. A master key is required in the database to save the session key.
28052	16	No	Cannot decrypt session key while regenerating master key with FORCE option.
28053	16	No	Service Broker could not upgrade conversation session keys in database '%.*ls' to encrypted format (Error: %d). The Service Broker in this database was disabled. A master key is required to the database in order to enable the broker.
28054	16	No	Service Broker needs to access the master key in the database '%.*ls'. Error code:%d. The master key has to exist and the service master key encryption is required.
28055	16	No	The certificate '%.*ls' is not valid for endpoint authentication. The certificate must have a private key encrypted with the database master key and current UTC date has to be between the certificate start date and the certificate expiration date.
28056	16	No	This message could not be delivered because the user with ID %i in database ID %i does not have control permission on the service. Service name: '%.*ls'.
28057	10	No	Service Broker in database '%.*ls' has a pending conversation upgrade operation. A database master key in the database is required for this operation to complete.
28058	16	No	Service Broker could not upgrade this conversation during a database upgrade operation.
28059	16	No	Connection handshake failed. The received premaster secret of size %d does not have the expected size of %d. State %d.
28060	16	No	The AES encryption algorithm is only supported on Windows XP, Windows Server 2003 or later versions.
28061	16	No	A corrupted message has been received. The adjacent message integrity check signature could not be validated.
28062	16	No	A corrupted message has been received. The signed dialog message header is invalid.
28063	16	No	A corrupted message has been received. A required variable data field is not present: %S_MSG. This occurred in the message with Conversation ID '%.*ls', Initiator: %d, and Message sequence number: %I64d.
28064	16	No	A corrupted message has been received. A string variable data field is not a valid UNICODE string: %S_MSG. This occurred in the message with Conversation ID '%.*ls', Initiator: %d, and Message sequence number: %I64d.
28065	16	No	A corrupted message has been received. The unsigned dialog message header is invalid. This occurred in the message with Conversation ID '%.*ls', Initiator: %d, and Message sequence number: %I64d.
28066	16	No	A corrupted message has been received. The security dialog message header is invalid. This occurred in the message with Conversation ID '%.*ls', Initiator: %d, and Message sequence number: %I64d.
28067	16	No	A corrupted message has been received. The encrypted offset of the envelope does not match the payload encrypted offset. This occurred in the message with Conversation ID '%.*ls', Initiator: %d, and Message sequence number: %I64d.
28068	16	No	A corrupted message has been received. The envelope payload is bigger than the message. This occurred in the message with Conversation ID '%.*ls', Initiator: %d, and Message sequence number: %I64d.
28069	16	Yes	Unexpected session key when encrypting a dialog message.
28070	10	No	Connection handshake failed. The received SSPI message Confirm status is unexpected. State %d.
28071	10	No	The received message could not be forwarded onto another connection. State %d.
28072	16	No	A serious error occurred in the Service Broker message transmitter (operation %i): Error: %i, State: %i. Message transmission will resume in %i seconds.
28073	16	No	An out of memory condition has occurred in the Service Broker message transmitter (operation %i). Message transmission will resume in %i seconds.
28074	16	No	Service Broker could not upgrade conversation with conversation_handle '%ls'. Use END CONVERSATION ... WITH CLEANUP to delete this conversation, then try again to enable the broker. Use ALTER DATABASE ... SET ERROR_BROKER to error all conversations in this database. Use ALTER DATABASE ... SET NEW_BROKER to delete all conversations in this database.
28075	10	No	The broker in the sender's database is in single user mode. Messages cannot be delivered while in single user mode.
28076	10	No	Could not query the FIPS compliance mode flag from registry. Error %ls.
28077	10	No	%S_MSG endpoint is running in FIPS compliance mode. This is an informational message only. No user action is required.
28078	10	No	The RC4 encryption algorithm is not supported when running in FIPS compliance mode.
28079	10	No	Connection handshake failed. The received SSPI packet is not of the expected direction. State %d.
28080	10	No	Connection handshake failed. The %S_MSG endpoint is not configured. State %d.
28081	10	No	Connection handshake failed. An unexpected status %d was returned when trying to send a handshake message. State %d.
28082	10	No	Connection handshake failed. An unexpected internal failure occurred when trying to marshal a message. State %d.
28083	16	No	The database principal '%.*ls' cannot be used in a remote service binding because it cannot own certificates. Remote service bindings cannot be associated with 1) roles, 2) groups or 3) principals mapped to certificates or asymmetric keys.
28084	10	No	An error occurred in Service Broker internal activation while trying to scan the user queue '%ls' for its status. Error: %i, State: %i. %.*ls This is an informational message only. No user action is required.
28085	16	No	The activated task was ended because the associated queue was dropped.
28086	16	No	The activated task was ended because either the queue or activation was disabled.
28087	16	No	The activated task was aborted because the invoked stored procedure '%ls' did not execute RECEIVE.
28088	16	No	The activated task was aborted due to an error (Error: %i, State %i). Check ERRORLOG or the previous "Broker:Activation" trace event for possible output from the activation stored procedure.
28089	16	No	The database principal '%.*ls' cannot be used in a remote service binding because it cannot own certificates. This is a special user for backward compatibility with implicitly connected user schemas.
28090	16	No	An error occurred while deleting sent messages from the transmission queue, Error: %i, State: %i. Verify that no other operation is locking the transmission queue, and that the database is available.
28091	10	No	Starting endpoint for %S_MSG with no authentication is not supported.
28092	10	No	Error updating proxy settings
28098	10	No	A previously existing connection with the same peer was found after DNS lookup. This connection will be closed. All traffic will be redirected to the previously existing connection. This is an informational message only. No user action is required. State %d.
28099	10	No	During the database upgrade process on database '%.*ls', a user object '%S_MSG' named '%.*ls' was found to already exist. That object is now reserved by the system in this version of SQL Server. Because it already exists in the database, the upgrade process is unable to install the object. Remove or rename the user object from the original (pre-upgraded) database on an older version of SQL Server and then retry the database upgrade process by using CREATE DATABASE FOR ATTACH. Functionality that relies on the reserved object may not function correctly if you continue to use the database in the current state.
28101	16	No	User '%.*ls%.*ls' does not have permission to debug the requested client connection.
28102	16	No	Batch execution is terminated because of debugger request.
28401	16	No	Feature or option '%ls' is not available. Please consult Books Online for more information on this feature or option.
28405	17	Yes	During error handling, a second error was raised, causing an unrecoverable failure.
28502	11	No	The specified object Id is not valid.
28503	11	No	The specified index Id is not valid.
28504	11	No	The specified partition number is not valid.
28506	11	No	Incorrect number of keys was specified. Must specify at least first %d key columns
28554	16	Yes	Data Virtualization Manager not found.
28555	10	Yes	DVM failed to handle matrix reconfiguration. {error_code: %d, state: %d}
28601	16	No	The Transaction Coordination Manager has encountered error %d, state %d, severity %d and is shutting down. This is a serious error condition, which may prevent further transaction processing. Examine previously logged messages to figure out the cause for this unexpected failure. Depending on the failure condition, the Transaction Coordination Manager might be restarted automatically.
28602	16	No	The transaction is aborted because the transaction agent is shutting down.
28603	10	Yes	Transaction agent is shutting down because shutdown request was received from the manager.
28604	10	Yes	Transaction Coordination Manager is starting up. This is an informational message only. No user action is required.
28605	10	Yes	Transaction Coordination Manager is inactive. This is an informational message only. No user action is required.
28606	10	Yes	Transaction Coordination Manager is active with %016I64x as the starting AGE. This is an informational message only. No user action is required.
28607	16	No	TCM %.*ls has received an out of order message from brick id %d and has to be stopped. Based on the state of the system it may restart and re-synchronize automatically. Typical causes for missed messages are temporary network errors or out of memory conditions. Look for earlier messages in the log which should contain additional information.
28608	16	No	Federated transaction could not be started at this time because the TCM Agent is not in a state, which allows new transactions to begin. The TCM Agent is currently in state: %d. The most common reason for this is that the system is being shutdown. Previous messages in the log should contain additional information.
28609	16	No	Matrix transaction operation is not allowed because the transaction doesn't allow forward progress, the transaction will be rolled back.
28610	16	No	Matrix transaction couldn't commit because the task is aborted. The task is aborted either because of cancel instruction from client application, or because one or more transaction paritipant went offline.
28612	20	No	An error occurred while accessing Transaction Coordination Manager metadata. Could not persist AGE %016I64x.
28613	10	Yes	Transaction Coordination Agent is active. This is an informational message only. No user action is required.
28614	16	No	TCM manager has received a request for re-synchronization from brick id %d and will now restart. Typical causes where restart is necessary are temporary network errors or out of memory conditions. Look for earlier messages in the log on the offending brick for more information.
28615	20	No	The request has performed an operation that is disallowed on a remote branch of a transaction
28701	16	No	Request aborted due to communication errors: an attempt was made to use channel %d.%d.%I64u in the closed state.
28702	16	No	Request aborted due to communication errors: incoming message format violation.
28703	16	No	Request aborted due to communication errors: no enabled channel maps for component %d found.
28704	16	No	Request aborted due to communication errors: unable to allocate new message for the brick %d. Error code %d.
28705	16	No	Request aborted due to communication errors: unable to complete send operation for the pipeline %hs. Error code %d.
28706	10	No	Next message reported have originated on brick %d.
28707	20	No	Brick was unable to communicate with configuration manager and will be disconnected. See previous errors for the details.
28708	16	No	Failure encountered due to Matrix configuration change: a brick was evicted.
28709	16	No	Dispatcher was unable to create new thread.
28710	16	No	Request aborted due to communication errors: pipeline %hs inconsistency detected: send side reported %I64d bytes sent but there were no messages received on other side.
28711	16	No	Request aborted due to communication errors: pipeline %hs inconsistency detected: send side reported %I64d bytes sent at age %d (current age and bytes sent are %I64d and %I64d) but receive side has processed only %I64d at age %d.
28712	16	No	Unable to start expiration manager dispatch thread. Result code %d.
28713	16	No	Communication subsystem failed to process user abort request. Error Number: %d; State: %d.
28714	16	No	Request aborted due to communication errors: an attempt was made to communicate with Brick %d which is no longer online or have been reconfigured.
28715	10	No	Execution of the request was aborted on remote brick.
28716	16	No	Request aborted due to communication errors: too many concurrent operations.
28717	16	No	Request aborted due to communication errors: communication subsystem is shutting down or initialization not complete yet.
28718	16	No	Request aborted due to communication errors: pipeline %hs received message (classId %d, sequenceId %d) from the expired age %d (last acceptable age %d).
28719	16	No	Request aborted due to Fabric errors: unable to enqueue a task for workspace 0x%I64x.
28720	16	No	Mci subsystem failed to start with error %d.
28721	16	No	Mci subsystem failed to start channel %d with error %d
28722	20	No	Force close service was unable to communicate with configuration manager (brick %d) either due errors or timeout (%d milliseconds). Matrix is not functioning properly. Investigation is prudent.
28723	16	No	Brick was shutdown by administrator request
28724	16	No	Channel close verification
28725	20	No	Unable to process cancellation request due to resource availability. Retrying...
28726	20	No	Unable to process activation data for a workspace.
28727	20	No	Unable to process incoming message due to resource availability.
28728	16	No	Request aborted due to communication errors: no channel maps of version %d for component %d found to create channel %I64u.
28729	16	No	Request aborted due to communication errors: a message have arrived for non-activated channel %I64u.
28903	16	Yes	Configuration manager agent enlistment is retrying enlistment since brick <%d> eviction is pending.
28904	16	Yes	Configuration manager agent enlistment is sending join request message to manager.
28905	16	Yes	Configuration manager agent enlistment failed to receive reply from manager. See previous errors in error log.
28906	16	Yes	Configuration manager agent enlistment completed with '%s'.
28907	16	Yes	Configuration manager agent enlistment stopped.
28908	16	Yes	Configuration manager agent enlistment failed due to different enlistment protocol versions between manager and agent. Version received from manager: <%d>, Version expected: <%d>.
28909	16	Yes	Configuration manager agent enlistment failed due to receiving reply from invalid manager brick id <%d> .
28911	10	Yes	Configuration manager agent enlistment succeeded. Manager accepted brick <%d> join request.
28912	16	Yes	Brick <%d> enlistment with configuration manager failed due to '%s' mismatch. Brick will be taken down.
28913	16	Yes	Configuration manager agent enlistment encountered error %d, state %d, severity %d and is shutting down. This is a serious error condition, that prevents the brick from joining the matrix. Brick will be taken down.
28914	10	Yes	Configuration manager agent enlistment: Brick <%d>, state <%d>.
28915	16	Yes	Configuration manager agent encountered error %d, state %d, severity %d while updating brick <%lu> incarnation to %I64u. Examine previous logged messages to determine cause of this error.
28916	16	Yes	Configuration manager agent encountered error %d, state %d, severity %d while updating state information. Examine previous logged messages to determine cause of this error.
28917	10	Yes	Configuration manager agent enlistment received join reply message.
28919	16	Yes	Duplicate brick id <%d> detected in configuration file.
28920	16	Yes	Configuration manager agent cannot send reported error to configuration manager due to error %d, state %d, severity %d.
28921	16	Yes	No configuration file specified.
28922	16	Yes	Configuration manager agent thread encountered fatal exception (error: %d severity: %d state: %d). This is a serious error and brick will be taken down. Examine previously logged messages to figure out the cause for this fatal failure.
28923	16	Yes	Configuration manager agent initialization failed. See previous errors in error log. This is a serious error condition and brick will be taken down.
28924	16	Yes	Configuration manager agent activation failed.
28929	16	Yes	Configuration manager agent cannot commit new roster.
28931	16	Yes	Configuration manager agent roster is corrupt.
28932	16	Yes	Configuration manager agent did not receive a shutdown channel map.
28933	16	Yes	Configuration manager agent could not perform brick down notification.
28934	16	Yes	Configuration manager agent could not perform brick up notification.
28935	16	Yes	Configuration manager agent is trying to start non-existing agent %d.
28936	16	Yes	Configuration manager agent start failed (Loc: %d).
28937	16	Yes	Configuration manager agent stop failed.
28938	10	Yes	Configuration manager agent has started.
28939	10	Yes	Configuration manager agent has shutdown.
28940	16	Yes	Configuration manager agent could not delete stale MCI sessions.
28942	16	Yes	Error reading configuration file. (Reason=%d).
28943	16	Yes	Error reading configuration file. Column %s not defined.
28944	16	Yes	Error reading configuration file. Host name or instance name cannot be empty (Reason: %d).
28945	16	Yes	Error reading configuration file. Invalid contents. (Reason=%d).
28946	16	Yes	Error reading matrix.xsd schema configuration file. (Reason=%d).
28947	16	No	Error reading configuration file. (line:%d, column:%d, Reason=%s).
28948	16	Yes	Error reading configuration file. Invalid placement brick id.
28949	16	Yes	Error during configuration check (Function:%s, result: 0x%08lx).
28950	16	Yes	Configuration manager agent cannot store metadata.
28951	16	Yes	Cannot update roster, brick id %d not part of roster.
28952	16	Yes	Configuration manager cannot initialize agent %d.
28953	16	Yes	Matrix agent %d has the invalid state %d.
28955	16	Yes	Cannot create roster memento.
28958	16	Yes	Error copying configuration. (Reason=%s).
28959	16	Yes	Cannot commit metadata change for brick id %d.
28960	16	Yes	Error: Cannot read <%s> node of configuration file.
28961	16	Yes	Error: invalid configuration file, no bricks defined.
28962	16	Yes	Error: Invalid value for manager name %s specified.
28963	16	Yes	Error: Invalid value for manager role %s specified.
28964	16	Yes	Error: Cannot create dom object for writing of XML configuration file (Reason %d).
28968	10	Yes	Starting communication infrastructure for communication between configuration manager and agent
28969	10	Yes	Configuration manager agent shutting down...
28970	16	Yes	Error: cannot update matrix metadata (Loc: %d).
28972	16	Yes	Error: cannot determine host name.
28973	16	Yes	Configuration manager agent cannot create notification publisher.
28974	16	Yes	Configuration manager agent cannot create notification service.
28975	16	Yes	Brick not configured correctly, corrupt configuration file.
28976	16	Yes	Configuration manager agent is ignoring stale message from manager brick %d due to '%s' mismatch. Expected %I64u but received %I64u
28977	16	Yes	Configuration manager agent is performing '%s' '%s' operation.
28978	16	Yes	Configuration manager agent cannot '%s' '%s'. Examine previous logged messages to determine cause of this error. This is a fatal error affecting system functionality and brick will be taken down.
28979	16	Yes	Configuration manager agent cannot '%s' '%s' due to invalid state '%s'. This is a fatal error affecting system functionality and brick will be taken down.
28980	16	Yes	Error writing brick simulator state file. (Reason=%s).
29001	16	No	To connect to this server you must use SQL Server Management Studio or SQL Server Management Objects (SMO).
29003	16	No	Invalid parameter combinations.
29004	16	No	Unknown property specified: %s.
29103	16	Yes	TCMA is shutting down since it encountered fatal error %d, state %d, severity %d
29104	16	Yes	Failure in channel announce
29105	16	Yes	Failure in channel enable
29201	17	Yes	Configuration manager enlistment can not initialize communication service to receive enlistment requests
29202	16	Yes	Configuration manager enlistment is ignoring message from brick <%d>. Enlistment protocol version mismatch. Agent version <%X>, manager version <%X>.
29203	16	Yes	Configuration manager enlistment denied join of brick <%d>.
29204	16	Yes	Configuration manager enlistment denied join of brick <%d>. Server default collation mismatch. Agent collation <%lu>, manager collation <%lu>.
29205	16	Yes	Configuration manager enlistment denied join of brick <%d>. SQL version or build number mismatch. Agent version <%X>, manager version <%X>.
29206	16	Yes	Configuration manager enlistment is ignoring messages from brick <%d> since message queue does not exist.
29207	16	Yes	Configuration manager enlistment is ignoring stale message from brick %d due to '%s' mismatch. Expected %I64u but received %I64u
29208	16	Yes	Cannot commit metadata change '%s' for brick id %d.
29209	16	Yes	Configuration manager enlistment encountered error %d, state %d, severity %d and is shutting down. This is a serious error condition, which prevents further enlistment and bricks joining matrix. Brick will be restarted.
29210	16	Yes	Configuration manager enlistment encountered error %d, state %d, severity %d while sending enlistment reply to brick <%lu>. Enlistment reply not sent! Examine previous logged messages to determine cause of this error.
29211	16	Yes	Configuration manager enlistment is ignoring request from invalid brick id <%d>.
29212	16	Yes	Configuration manager enlistment encountered error %d, state %d, severity %d while updating brick <%lu> incarnation to %I64u. Enlistment request from brick is not processed. Examine previous logged messages to determine cause of this error.
29215	10	Yes	Configuration manager enlistment acknowledges brick join request. Brick <%d> joined matrix.
29217	10	Yes	Configuration manager enlistment received a new enlistment message.
29218	10	Yes	Configuration manager enlistment state machine: Brick <%d>, state <%d>
29219	10	Yes	Reserved brick <%d> is now marked active
29220	10	Yes	Configuration manager enlistment started.
29221	10	Yes	Configuration manager enlistment stopped.
29222	16	Yes	Configuration manager enlistment did not receive enlistment messages
29223	17	No	Configuration manager enlistment ran out of memory. Enlistment messages ignored.
29224	10	Yes	Configuration manager enlistment sent reply to brick <%d>.
29225	10	Yes	Configuration manager enlistment received join message from brick <%d>
29227	17	Yes	Thread creation failed. (RC=%d).
29228	10	Yes	Matrix transitioned from state %d to state %d.
29229	10	Yes	Brick transitioned from state %d to state %d.
29230	10	Yes	Manager transitioned from state %d to state %d.
29231	10	Yes	Matrix transitioned from state %d to state %d.
29232	16	Yes	Cannot create configuration manager enlistment thread.
29233	16	Yes	Configuration manager thread encountered fatal exception (error: %d state: %d severity: %d). This is a serious error and brick will be taken down. Examine previously logged messages to figure out the cause for this fatal failure.
29234	16	Yes	Configuration manager initialization failed. (Reason=%s).
29235	16	Yes	Configuration manager cannot create channel distribution service.
29236	16	Yes	Configuration manager cannot create force close service.
29237	16	Yes	Configuration manager cannot create expiration service.
29239	16	Yes	Configuration manager reconfiguration failed.
29241	16	Yes	Configuration manager initialization failed.
29242	16	Yes	Configuration manager activation failed.
29243	16	Yes	Configuration manager quiesce operation failed.
29244	16	Yes	Configuration manager release operation failed.
29245	16	Yes	Configuration manager cannot quiesce the agents.
29246	16	Yes	Configuration manager reconfiguration failed due to error %d, state %d, severity %d.
29247	16	Yes	Configuration manager error handler initialization failed due to error %d, state %d, severity %d. This is a serious error and brick will be taken down. Examine previously logged messages to figure out the cause for this fatal failure.
29249	16	Yes	Configuration manager broadcast channel shutdown crashed.
29250	16	Yes	Configuration manager cannot perform action %d on other bricks in the matrix due to error %d, state %d, severity %d.
29251	16	Yes	Configuration manager cannot create notification.
29252	16	Yes	Configuration manager cannot create brick down event for unregistered brick <%d>
29253	16	Yes	Configuration manager cannot perform channel distribution (Reason: %d, Loc: %d)
29254	16	Yes	Configuration manager cannot activate the agents.
29255	16	Yes	Configuration manager cannot send reconfig event.
29256	16	Yes	Configuration manager cannot retire old channel maps (Loc: %d).
29257	16	Yes	Configuration manager cannot shutdown old channel maps (Loc: %d).
29258	16	Yes	Configuration manager cannot cannot deliver shutdown ack to leaving bricks.
29260	16	Yes	Configuration manager cannot set matrix state.
29261	16	Yes	Configuration manager detected an invalid matrix state.
29262	16	Yes	Configuration manager can only evict bricks from the manager brick.
29263	16	Yes	Configuration manager can only force close bricks from the manager brick.
29264	16	Yes	Configuration manager brick down notification failed.
29265	16	Yes	Configuration manager reconfig announce step failed.
29266	16	Yes	Configuration manager reconfig enable step failed.
29267	16	Yes	Configuration manager performed reconfig without membership change.
29268	16	Yes	Configuration manager reconfig retire step failed.
29269	16	Yes	Configuration manager cannot start non-registered manager %d.
29270	10	Yes	Configuration manager has started accepting enlistment requests
29271	10	Yes	Configuration manager has shutdown.
29272	16	Yes	Configuration manager enlistment denied join of brick <%d>. Machine architecture mismatch. Agent machine architecture <%X>, manager machine architecture <%X>.
29273	16	Yes	Error: cannot bump Configuration manager major version (Loc: %d).
29274	16	Yes	Component %s reported that the component %s in brick %d is in a suspicious state because of the error: %d, severity: %d, state: %d, description: '%s'. Additional description provided was: '%s'. This report will be sent to the configuration manager known to be on brick %d.
29275	16	Yes	Component %s from brick %d reported that the component %s in brick %d is in a suspicious state because of the error: %d, severity: %d, state: %d, description: '%s'. Additional description provided was: '%s'.
29276	16	Yes	Brick down message for brick %d enqueued due to fatal error reported for component %s by component %s in brick %d. Fatal error reported is error code: %d, severity: %d, state: %d, description: '%s'. Additional description provided was: '%s'.
29277	16	Yes	Configuration manager enlistment is queuing a failure request for brick <%d> due to receiving new enlistment request from this brick.
29278	16	No	Configuration manager is evicting brick <%d> from which it did not receive expected reply during communication. This also includes brick not responding within timeout.
29279	16	Yes	Configuration manager could not read metadata necessary for its operation from the master database.
29280	16	Yes	Configuration manager is performing '%s' '%s' operation on all online bricks.
29281	16	Yes	Configuration manager is performing '%s' '%s' operation on brick <%lu>.
29282	16	Yes	Configuration manager cannot '%s' '%s'. Examine previous logged messages to determine cause of this error. This is a fatal error affecting system functionality and brick <%lu> will be evicted.
29283	16	Yes	Configuration manager cannot initialize communication object. Examine previous logged messages to determine cause of this error.
29284	16	Yes	Configuration manager could not write the WMI offline configuration file. (Reason=%s).
29285	16	Yes	Configuration manager enlistment denied join of brick <%lu>. Supported number of bricks mismatch. Agent supported number of bricks <%lu>, manager supported number of bricks <%lu>.
29286	10	Yes	Brick <%lu> will be allowed to join matrix once its previous brick down reconfiguration is completed.
29300	16	Yes	The configuration file name %ls is invalid.
29301	16	Yes	Failed to open configuration file %ls.
29302	16	Yes	Configuration file %ls is empty.
29303	16	Yes	The configuration file %ls is corrupt.
29304	16	Yes	Cannot create brick configuration.
29305	16	Yes	The configuration property %s is corrupt.
29306	16	Yes	The configuration file name cannot be constructed. (Reason: %d).
29307	16	Yes	Cannot set the roster property %s.
29308	16	Yes	Local brick id <%d> does not match brick id <%d> in the resource database.
29309	16	Yes	Brick id has not been set. (Resource instance name: %s)
29311	16	Yes	An error occurred while trying to connect to a service control manager on machine %ls. Error returned: %d - %ls.
29312	16	Yes	An error occurred while trying to perform a service operation on service %ls on machine %ls. Error returned: %d - %ls.
29314	16	Yes	The service %ls on machine %ls failed to start in a timely fashion. Service specific error code %d.
29315	16	Yes	OS user does not have the required privileges to start the remote service on brick %d.
29316	16	Yes	The path name for the file matrix.xsd cannot be constructed. (Reason: %d).
29317	16	Yes	Communication involving configuration manager and agent is ignoring stale message from brick <%lu> to brick <%lu> due to '%s' mismatch. Expected %I64u but received %I64u.
29318	16	Yes	Communication involving configuration manager and agent is unable to send message from brick <%lu> to brick <%lu> due to error %d, state %d, severity %d.
29319	16	Yes	Communication involving configuration manager and agent did not receive a valid reply from brick <%lu>
29320	16	Yes	Communication involving configuration manager and agent cannot be initialized due to error %d, state %d, severity %d.
29321	16	Yes	Communication involving configuration manager and agent received a failure response <0x%lx> from brick <%lu>.
29400	16	Yes	Synchronous write task failed due to inconsistent prism state.
29401	16	Yes	Prism operation failed due to error code %d.
29402	16	Yes	Synchronous write task was aborted.
29501	16	Yes	Data Virtualization Manager Agent not found.
29601	16	Yes	SM force closing channel to recover after errors
30003	16	No	A fulltext system view or stvf cannot open database id %d.
30004	16	No	A fulltext system view or stvf cannot open user table object id %d.
30005	16	No	The name specified for full-text index fragment %.*ls is not valid.
30006	16	No	A fulltext system view or stvf cannot open fulltext index for user table object id %d.
30007	16	No	Parameters of dm_fts_index_keywords, dm_fts_index_keywords_by_document, dm_fts_index_keywords_by_property, and dm_fts_index_keywords_position_by_document cannot be null.
30008	16	No	This is an internal error when invoking the TVF to access the full-text index. The level number specified for the TVF is not valid. Valid level numbers start from 0 and must be less than the number of levels of the compressed index.
30009	16	No	The argument data type '%ls' specified for the full-text query is not valid. Allowed data types are char, varchar, nchar, nvarchar.
30020	16	No	The full-text query parameter for %S_MSG is not valid.
30022	10	No	Warning: The configuration of a full-text stoplist was modified using the WITH NO POPULATION clause. This put the full-text index into an inconsistent state. To bring the full-text index into a consistent state, start a full population. The basic Transact-SQL syntax for this is: ALTER FULLTEXT INDEX ON table_name START FULL POPULATION.
30023	16	No	The fulltext stoplist '%.*ls' does not exist or the current user does not have permission to perform this action. Verify that the correct stoplist name is specified and that the user had the permission required by the Transact-SQL statement.
30024	16	No	The fulltext stoplist '%.*ls' already exists in the current database. Duplicate stoplist names are not allowed. Rerun the statement and specify a unique stoplist name.
30025	16	No	The search property list '%.*ls' does not exist or you do not have permission to perform this action. Verify that the correct search property list name is specified and that you have the permission required by the Transact-SQL statement. For a list of the search property lists on the current database, use the sys.registered_search_property_lists catalog view. For information about permissions required by a Transact-SQL statement, see the Transact-SQL reference topic for the statement in SQL Server Books Online.
30026	16	No	The search property list '%.*ls' already exists in the current database. Duplicate search property list names are not allowed. Rerun the statement and specify a unique name for the search property list. For a list of the search property lists on the current database, use the sys.registered_search_property_lists catalog view.
30027	10	No	The full-text index is in an inconsistent state because the search property list of the full-text index was reconfigured using the WITH NO POPULATION clause. To bring the full-text index into a consistent state, start a full population using the statement ALTER FULLTEXT INDEX ON <table_name> START FULL POPULATION;. This is a warning. No user action is necessary.
30028	17	No	Failed to get pipeline interface for '%ls', resulting in error: 0x%X. There is a problem communicating with the host controller or filter daemon host.
30029	17	No	The full-text host controller failed to start. Error: 0x%X.
30030	16	No	The search property '%.*ls' does not exist, or you do not have permission to perform this action. Verify that the correct search property is specified and that you have the permission required by the Transact-SQL statement. For a list of the search properties on the current database, use the sys.registered_search_properties catalog view. For information about the permissions required by a Transact-SQL statement, see the Transact-SQL reference topic for the statement in SQL Server Books Online.
30031	17	No	A full-text master merge failed on full-text catalog '%ls' in database '%.*ls' with error 0x%08X.
30032	16	No	The stoplist '%.*ls' does not contain fulltext stopword '%.*ls' with locale ID %d. Specify a valid stopword and locale identifier (LCID) in the Transact-SQL statement.
30033	16	No	The stoplist '%.*ls' already contains full-text stopword '%.*ls' with locale ID %d. Specify a unique stopword and locale identifier (LCID) in the Transact-SQL statement.
30034	16	No	Full-text stoplist '%.*ls' cannot be dropped because it is being used by at least one full-text index. To identify which full-text index is using a stoplist: obtain the stoplist ID from the stoplist_id column of the sys.fulltext_indexes catalog view, and then look up that stoplist ID in the stoplist_id column of the sys.fulltext_stoplists catalog view. Either drop the full-text index by using DROP FULLTEXT INDEX or change its stoplist setting by using ALTER FULLTEXT INDEX. Then retry dropping the stoplist.
30035	16	No	The search property '%.*ls' already exists in the search property list. Specify a search property name that is unique within the specified search property list. For a list of the search properties on the current database, use the sys.registered_search_properties catalog view.
30036	16	No	Search property list '%.*ls' cannot be dropped because it is being used by at least one full-text index. To identify the full-text indexes that are using the search property list, obtain the search property list id from the property_list_id column of the sys.registered_search_property_lists catalog view, and then obtain the object ID of every table or indexed view whose full-text index is associated with this search property list from the object_id and property_list_id columns of the sys.fulltext_indexes catalog view . For each full-text index, either remove the search property list or drop the full-text index, if it is no longer needed. To remove the search property list, use ALTER FULLTEXT INDEX ON <table_name> SET SEARCH PROPERTY LIST OFF;. To drop a full-text index, use DROP FULLTEXT INDEX ON <table_name>;.
30037	16	No	An argument passed to a fulltext function is not valid.
30038	17	No	Fulltext index error during compression or decompression. Full-text index may be corrupted on disk. Run dbcc checkdatabase and re-populate the index.
30039	17	No	Data coming back to the SQL Server process from the filter daemon host is corrupted. This may be caused by a bad filter. The batch for the indexing operation will automatically be retried using a smaller batch size.
30040	10	No	During a full-text crawl of table or indexed view '%ls', an unregistered property, '%ls', was found in batch ID %d. This property will be indexed as part of the generic content and will be unavailable for property-scoped full-text queries. Table or indexed view ID is '%d'. Database ID is '%d'. For information about registering properties and updating the full-text index of a table or indexed view, see the full-text search documentation in SQL Server Books Online. This is an informational message. No user action is necessary.
30041	10	No	The master merge started at the end of the full crawl of table or indexed view '%ls' failed with HRESULT = '0x%08x'. Database ID is '%d', table id is %d, catalog ID: %d.
30043	16	No	Stopwords of zero length cannot be added to a full-text stoplist. Specify a unique stopword that contains at least one character.
30044	16	No	The user does not have permission to alter the current default stoplist '%.*ls'. To change the default stoplist of the database, ALTER permission is required on both new and old default stoplists.
30045	17	No	Fulltext index error during compression or decompression. Full-text index may be corrupted on disk. Run dbcc checkdatabase and re-populate the index.
30046	16	No	SQL Server encountered error 0x%x while communicating with full-text filter daemon host (FDHost) process. Make sure that the FDHost process is running. To re-start the FDHost process, run the sp_fulltext_service 'restart_all_fdhosts' command or restart the SQL Server instance.
30047	16	No	The user does not have permission to %.*ls stoplist '%.*ls'.
30048	10	No	Informational: Ignoring duplicate thesaurus rule '%ls' while loading thesaurus file for LCID %d. A duplicate thesaurus phrase was encountered in either the <sub> section of an expansion rule or the <pat> section of a replacement rule. This causes an ambiguity and hence this phrase will be ignored.
30049	17	No	Fulltext thesaurus internal error (HRESULT = '0x%08x')
30050	16	No	Both the thesaurus file for lcid '%d' and the global thesaurus could not be loaded.
30051	16	No	Phrases longer than 512 unicode characters are not allowed in a thesaurus file. Phrase: '%ls'.
30052	16	No	The full-text query has a very complex NEAR clause in the CONTAINS predicate or CONTAINSTABLE function. To ensure that a NEAR clause runs successfully, use only six or fewer terms. Modify the query to simplify the condition by removing prefixes or repeated terms.
30053	16	No	An error has occurred during the full-text query. Common causes include: word-breaking errors or timeout, FDHOST permissions/ACL issues, service account missing privileges, malfunctioning IFilters, communication channel issues with FDHost and sqlservr.exe, etc.
30055	10	No	Full-text catalog import has started for full-text catalog '%ls' in database '%ls'.
30056	10	No	Full-text catalog import has finished for full-text catalog '%ls' in database '%ls'. %d fragments and %d keywords were processed.
30057	10	No	Upgrade option '%ls' is being used for full-text catalog '%ls' in database '%ls'.
30058	16	No	Properties of zero length cannot be added to a search property list. Specify a search property name that contains at least one character and that is unique to the specified search property list. For a list of the search properties on the current database, use the sys.registered_search_properties catalog view.
30059	16	No	A fatal error occurred during a full-text population and caused the population to be cancelled. Population type is: %s; database name is %s (id: %d); catalog name is %s (id: %d); table name %s (id: %d). Fix the errors that are logged in the full-text crawl log. Then, resume the population. The basic Transact-SQL syntax for this is: ALTER FULLTEXT INDEX ON table_name RESUME POPULATION.
30060	16	No	The import population for database %ls (id: %d), catalog %ls (id: %d) is being cancelled because of a fatal error ('%ls'). Fix the errors that are logged in the full-text crawl log. Then resume the import either by detaching the database and re-attaching it, or by taking the database offline and bringing it back online. If the error is not recoverable, rebuild the full-text catalog.
30061	17	No	The SQL Server failed to create full-text filterdata directory. This might be because FulltextDefaultPath is invalid or SQL Server service account does not have permission. Full-text blob indexing will fail until this issue is resolved. Restart SQL Server after the issue is fixed.
30062	17	No	The SQL Server failed to load FDHost service group sid. This might be because installation is corrupted.
30063	10	No	Warning: SQL Server could not set fdhost.exe processor affinity to %d because the value is not valid.
30064	17	No	SQL Server failed to set security information on the full-text FilterData directory in the FTData folder. Full-text indexing of some types of documents may fail until this issue is resolved. You will need to repair the SQL Server installation.
30065	10	No	Filegroup '%ls' is offline, readonly, or no data file. Full-text population on table '%ls' is not resumed. Resume full-text population after fixing the filegroup status.
30067	10	No	Warning: The detach operation cannot delete a full-text index created on table '%ls' in database '%ls' because the index is on a read-only filegroup. To drop the full-text index, re-attach the database, change the read-only filegroup to read/write access and then detach it. This warning will not fail the database detach operation.
30068	10	No	During the database upgrade, the full-text filter component '%ls' that is used by catalog '%ls' was successfully verified. Component version is '%ls'; Full path is '%.*ls'.
30069	11	No	The full-text filter component '%ls' used to populate catalog '%ls' in a previous SQL Server release is not the current version (component version is '%ls', full path is '%.*ls'). This may cause search results to differ slightly from previous releases. To avoid this, rebuild the full-text catalog using the current version of the filter component.
30070	10	No	During the database upgrade, the full-text word-breaker component '%ls' that is used by catalog '%ls' was successfully verified. Component version is '%ls'. Full path is '%.*ls'. Language requested is %d. Language used is %d.
30071	11	No	The full-text word-breaker component '%ls' used to populate catalog '%ls' in a previous SQL Server release is not the current version (component version is '%ls', full path is '%.*ls', language requested is %d, language used is %d). This may cause search results to differ slightly from previous releases. To avoid this, rebuild the full-text catalog using the current version of the word-breaker component.
30072	10	No	During the database upgrade, the full-text protocol handler component '%ls' that is used by catalog '%ls' was successfully verified. Component version is '%ls'. Full path is '%.*ls'. Program ID is '%.*ls'.
30073	11	No	The full-text protocol handler component '%ls' used to populate catalog '%ls' in a previous SQL Server release is not the current version (component version is '%ls', full path is '%.*ls', program ID is '%.*ls'). This may cause search results to differ slightly from previous releases. To avoid this, rebuild the full-text catalog using the current version of the protocol handler component.
30074	17	No	The master merge of full-text catalog '%ls' in database '%.*ls' was cancelled.
30075	10	No	Full-text crawls for database ID: %d, table ID: %d, catalog ID: %d will be stopped since the clustered index on the table has been altered or dropped. Crawl will need to re-start from the beginning.
30076	10	No	Full-text crawl forward progress information for database ID: %d, table ID: %d, catalog ID: %d has been reset due to the modification of the clustered index. Crawl will re-start from the beginning when it is unpaused.
30077	16	No	The full-text query did not use the value specified for the OPTIMIZE FOR query hint. Only single terms are allowed as values for full-text queries that contain an OPTIMIZE FOR query hint. Modify the OPTIMIZE FOR query hint value to be a single, non-empty term.
30078	10	No	The fulltext query did not use the value specified for the OPTIMIZE FOR hint because the query contained more than one type of full-text logical operator.
30079	10	No	The full text query ignored UNKNOWN in the OPTIMIZE FOR hint.
30080	16	No	The full-text population on table '%ls' cannot be started because the full-text catalog is importing data from existing catalogs. After the import operation finishes, rerun the command.
30081	10	No	A cached plan was compiled using trace flags that are incompatible with the current values. Consider recompiling the query with the new trace flag settings.
30082	16	No	Full-text predicates cannot appear in an aggregate expression. Place the aggregate expression in a subquery.
30083	16	No	Full-text predicates cannot appear in the GROUP BY clause. Place a GROUP BY clause expression in a subquery.
30084	16	No	The full-text index cannot be created because filegroup '%.*ls' does not exist or the filegroup name is incorrectly specified. Specify a valid filegroup name.
30085	16	No	A stoplist cache cannot be generated while processing a full-text query or performing full-text indexing. There is not enough memory to load the stoplist cache. Rerun the query or indexing command when more resources are available.
30086	16	No	The system ran out of memory while building a full-text index. The batch for the full-text indexing operation will automatically be retried using a smaller batch size.
30087	17	No	Data coming back to the SQL Server process from the filter daemon host is corrupted. This may be caused by a bad filter. The batch for the indexing operation will automatically be retried using a smaller batch size.
30088	10	No	The full-text filter daemon host process has stopped normally. The process will be automatically restarted if necessary.
30089	17	No	The fulltext filter daemon host (FDHost) process has stopped abnormally. This can occur if an incorrectly configured or malfunctioning linguistic component, such as a wordbreaker, stemmer or filter has caused an irrecoverable error during full-text indexing or query processing. The process will be restarted automatically.
30090	10	No	A new instance of the full-text filter daemon host process has been successfully started with version = %ls.
30091	10	No	A request to start a full-text index population on table or indexed view '%.*ls' is ignored because a population is currently paused. Either resume or stop the paused population. To resume it, use the following Transact-SQL statement: ALTER FULLTEXT INDEX ON %.*ls RESUME POPULATION. To stop it, use the following statement: ALTER FULLTEXT INDEX ON %.*ls STOP POPULATION.
30092	16	No	Full-text stoplist ID '%d' does not exist.
30093	17	No	The SQL Server word-breaking client failed to initialize. This might be because a filter daemon host process is not in a valid state. This can prevent SQL Server from initializing critical system objects. Full-text queries will fail until this issue is resolved. Try stopping SQL Server and any filter daemon host processes and then restarting the instance of SQL Server.
30094	17	No	The full-text indexing pipeline could not be initialized. This might be because the resources on the system are too low to allocate memory or create tasks. Try restarting the instance of SQL Server.
30095	10	No	The version of the language components used by full-text catalog '%ls' in database '%ls' is different from the version of the language components included this version of SQL Server. The full-text catalog will still be imported as part of database upgrade. To avoid any possible inconsistencies of query results, consider rebuilding the full-text catalog.
30096	10	No	A full-text retry pass of %ls population started for table or indexed view '%ls'. Table or indexed view ID is '%d'. Database ID is '%d'.
30097	10	No	The fulltext catalog upgrade failed because of an inconsistency in metadata between sys.master_files and sys.fulltext_catalogs for the catalog ID %d in database ID %d. Try to reattach this database. If this fails, then the catalog will need to be dropped or recreated before attach.
30098	10	No	An internal query to load data for a crawl on database '%.*ls' and table '%.*ls' failed with error code %d. Check the sql error code for more information about the condition causing this failure. The crawl needs to be restarted after this condition is removed.
30099	17	No	Fulltext internal error
30103	16	No	Invalid CM instance name.
30104	16	No	Invalid matrix name.
30105	16	No	Invalid TCP port number: %s.
30106	16	No	Invalid network security level.
30107	16	No	Invalid network isolation level.
30108	16	No	Invalid matrix guid.
30109	16	No	Invalid or duplicated brick ID was used: %s
30110	16	No	Invalid parameter.
30111	16	No	Matrix setup stored procedure '%s' failed with HRESULT 0x%x.
30112	16	No	Insert brick into metadata operation failed during execution of stored procedure '%s'.
30113	16	No	Insert manager into metadata operation failed during execution of stored procedure '%s'.
30114	16	No	Insert parameter into metadata operation failed during execution of stored procedure '%s'.
30115	16	No	No more bricks can be reserved. The maximum amount of %lu bricks is reached.
30118	16	No	Invalid server name provided to configure a matrix brick.
30119	16	No	Invalid CM brick GUID.
30120	16	No	Invalid brick GUID.
30121	16	No	'%s' in only allowed in standalone (non matrix) mode.
30122	16	No	'%s' in only allowed in single user (-m) mode.
30123	16	No	Drop existing matrix configuration failed during execution of stored procedure '%s'.
30124	16	No	An error occurred while updating the CM metadata to remove a brick.
30125	16	No	Configuration manager could not write the WMI offline configuration file during the execution of stored procedure '%s'.
30126	16	No	Could not complete the last operation with the brick_id %u due a metadata failure
30127	16	No	Attempt to cancel the reservation of a brick that is not reserved: %u
30128	16	No	The stored procedure '%s' failed with the error code %d
30129	16	No	'%s' in only allowed in matrix mode.
30130	16	No	The brick with server name '%s' already exists in the configuration.

Related content

• Database Engine events and errors
• Understanding Database Engine Errors
• Cause and Resolution of Database Engine Errors