Database Engine events and errors (3000 to 3999)

This article contains error message numbers (between the range 3000 and 3999) and their description, which is the text of the error message from the sys.messages catalog view. Where applicable, the error number is a link to further information.

For the full range of error numbers, see the list on Database Engine events and errors.

You can query the Database Engine to see a full list of all errors, by running the following query against the sys.messages catalog view:

SELECT message_id AS Error,
    severity AS Severity,
    [Event Logged] = CASE is_event_logged
        WHEN 0 THEN 'No' ELSE 'Yes'
        END,
    [text] AS [Description]
FROM sys.messages
WHERE language_id = 1040 /* replace 1040 with the desired language ID, such as 1033 for US English */
ORDER BY message_id;

SQL Server version

This article shows events and errors (between the range 3000 and 3999) for SQL Server 2022 (16.x). If you want to view events and errors for other versions of SQL Server, see:

• SQL Server 2019
• SQL Server 2017
• SQL Server 2016

Errors and events (3000 to 3999)

Error	Severity	Event logged	Description
3001	16	No	obsolete
3002	16	No	Cannot BACKUP or RESTORE a database snapshot.
3003	10	No	This BACKUP WITH DIFFERENTIAL will be based on more than one file backup. All those file backups must be restored before attempting to restore this differential backup.
3004	16	No	The primary filegroup cannot be backed up as a file backup because the database is using the SIMPLE recovery model. Consider taking a partial backup by specifying READ_WRITE_FILEGROUPS.
3005	10	No	The differential partial backup is including a read-only filegroup, '%ls'. This filegroup was read-write when the base partial backup was created, but was later changed to read-only access. We recommend that you create a separate file backup of the '%ls' filegroup now, and then create a new partial backup to provide a new base for later differential partial backups.
3006	16	No	The differential backup is not allowed because it would be based on more than one base backup. Multi-based differential backups are not allowed in the simple recovery model, and are never allowed for partial differential backups.
3007	16	No	The backup of the file or filegroup "%ls" is not permitted because it is not online. Container state: "%ls" (%d). Restore status: %d. BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data.
3008	16	No	The specified device type is not supported for backup mirroring.
3009	16	No	Could not insert a backup or restore history/detail record in the msdb database. This may indicate a problem with the msdb database. The backup/restore operation was still successful.
3010	16	No	Invalid backup mirror specification. All mirrors must have the same number of members.
3011	16	No	All backup devices must be of the same general class (for example, DISK and TAPE).
3012	17	No	VDI ran out of buffer when SQL Server attempted to send differential information to SQL Writer.
3013	16	No	%hs is terminating abnormally.
3014	10	No	%hs successfully processed %I64d pages in %d.%03d seconds (%d.%03d MB/sec).
3015	10	No	%hs is not yet implemented.
3016	16	No	Backup of file '%ls' is not permitted because it contains pages subject to an online restore sequence. Complete the restore sequence before taking the backup, or restrict the backup to exclude this file.
3017	16	No	The restart-checkpoint file '%ls' could not be opened. Operating system error '%ls'. Correct the problem, or reissue the command without RESTART.
3018	10	No	The restart-checkpoint file '%ls' was not found. The RESTORE command will continue from the beginning as if RESTART had not been specified.
3019	16	No	The restart-checkpoint file '%ls' is from a previous interrupted RESTORE operation and is inconsistent with the current RESTORE command. The restart command must use the same syntax as the interrupted command, with the addition of the RESTART clause. Alternatively, reissue the current statement without the RESTART clause.
3021	16	No	Cannot perform a backup or restore operation within a transaction.
3022	10	No	This backup is a file backup of read-write data from a database that uses the simple recovery model. This is only appropriate if you plan to set the filegroup to read-only followed by a differential file backup. Consult Books Online for more information on managing read-only data for the simple recovery model. In particular, consider how partial backups are used.
3023	16	No	Backup, file manipulation operations (such as ALTER DATABASE ADD FILE) and encryption changes on a database must be serialized. Reissue the statement after the current backup or file manipulation operation is completed.
3024	16	No	You can only perform a full backup of the master database. Use BACKUP DATABASE to back up the entire master database.
3025	16	No	Missing database name. Reissue the statement specifying a valid database name.
3027	16	No	The filegroup "%.*ls" is not part of database "%.*ls".
3028	10	No	The restart-checkpoint file '%ls' was corrupted and is being ignored. The RESTORE command will continue from the beginning as if RESTART had not been specified.
3030	16	No	Value of '%ls' must be less than or equal to value of '%ls'. Change the values and reissue the BACKUP statement.
3031	16	No	Option '%ls' conflicts with option(s) '%ls'. Remove the conflicting option and reissue the statement.
3032	16	No	One or more of the options (%ls) are not supported for this statement. Review the documentation for supported options.
3033	16	No	BACKUP DATABASE cannot be used on a database opened in emergency mode.
3034	16	No	No files were selected to be processed. You may have selected one or more filegroups that have no members.
3035	16	No	Cannot perform a differential backup for database "%ls", because a current database backup does not exist. Perform a full database backup by reissuing BACKUP DATABASE, omitting the WITH DIFFERENTIAL option.
3036	16	No	The database "%ls" is in warm-standby state (set by executing RESTORE WITH STANDBY) and cannot be backed up until the entire restore sequence is completed.
3038	16	No	The file name "%ls" is invalid as a backup device name. Reissue the BACKUP statement with a valid file name.
3039	16	No	Cannot perform a differential backup for file '%ls' because a current file backup does not exist. Reissue BACKUP DATABASE omitting the WITH DIFFERENTIAL option.
3040	10	No	An error occurred while informing replication of the backup. The backup will continue, but the replication environment should be inspected.
3041	16	Yes	BACKUP failed to complete the command %.*ls. Check the backup application log for detailed messages.
3042	10	No	BACKUP WITH CONTINUE_AFTER_ERROR successfully generated a backup of the damaged database. Refer to the SQL Server error log for information about the errors that were encountered.
3043	16	No	BACKUP '%ls' detected an error on page (%d:%d) in file '%ls'.
3044	16	No	Invalid zero-length device name. Reissue the BACKUP statement with a valid device name.
3045	16	No	BACKUP or RESTORE requires the NTFS file system for FILESTREAM and full-text support. The path "%.*ls" is not usable.
3046	16	No	Inconsistent metadata has been encountered. The only possible backup operation is a tail-log backup using the WITH CONTINUE_AFTER_ERROR or NO_TRUNCATE option.
3047	16	No	The BackupDirectory registry key is not configured correctly. This key should specify the root path where disk backup files are stored when full path names are not provided. This path is also used to locate restart checkpoint files for RESTORE.
3048	16	No	BACKUP LOG WITH TRUNCATE_ONLY cannot operate on database '%ls' because it is configured for database mirroring.
3049	16	No	BACKUP detected corruption in the database log. Check the errorlog for more information.
3050	16	No	SQL Server could not send the differential information for database file '%ls' of database '%ls\%ls' to the backup application because the differential information is too large to fit in memory, and an attempt to use a temporary file has failed.
3051	16	No	BACKUP LOG was unable to maintain mirroring consistency for database '%ls'. Database mirroring has been suspended.
3052	16	No	BACKUP LOG was unable to log updates for for database '%ls'. Subsequent log backups will be required to advance the backup point from %S_LSN to %S_LSN after log space is made available for logging them.
3053	16	No	BACKUP '%ls' detected an error on a page in file '%ls'.
3054	16	No	Differential file backups can include only read-only data for databases using the simple recovery model. Consider taking a partial backup by specifying READ_WRITE_FILEGROUPS.
3055	16	No	Backup destination "%.*ls" supports a FILESTREAM filegroup. This filegroup cannot be used as a backup destination. Rerun the BACKUP statement with a valid backup destination.
3056	16	No	The backup operation has detected an unexpected file in a FILESTREAM container. The backup operation will continue and include file '%ls'.
3057	16	No	Invalid device name. The length of the device name provided exceeds supported limit (maximum length is:%d). Reissue the BACKUP statement with a valid device name.
3058	10	No	File or device name exceeds the supported limit (maximum length is:%d) and will be truncated: %.*ls.
3059	16	No	This BACKUP or RESTORE command is not supported on a database mirror or secondary replica.
3060	10	No	The restart-checkpoint file '%ls' was corrupted. The restored database can not be recovered. Restart the RESTORE sequence.
3061	16	No	The restart-checkpoint file '%ls' could not be opened. Operating system error '%ls'. Make the file available and retry the operation or, restart the RESTORE sequence.
3062	16	No	Cannot backup from a HADRON secondary because it is not in Synchronizing or Synchronized state.
3063	16	No	Write to backup block blob device %ls failed. Device has reached its limit of allowed blocks.
3064	16	No	Write to backup block blob detected out of order write at offset %ld, last block offset was at %ld.
3065	16	No	Attempt to commit the block list for a block blob failed. Blob Name is "%.*ls". Storage Errorcode %ld.
3066	16	No	Could not find the database file referenced by the file snapshot %.*ls. Please make sure that the URL points to a valid snapshot on a database file.
3067	16	No	Failed while trying to delete file snapshot %.*ls. Error code %ld.
3068	16	No	Invalid file snapshot URL. Please make sure that the URL is correctly formed.
3069	16	No	Striping a backup set across multiple devices is not permitted for file snapshot backups.
3070	16	No	Specifying the WITH options FORMAT and FILE_SNAPSHOT is not permitted.
3071	16	No	The database %.*ls is configured for file snapshot point in time restore, log backups are not permitted.
3072	16	No	Backup encryption is incompatible with file snapshot backup if TDE is not enabled on the database.
3073	16	No	The option WITH FILE_SNAPSHOT is only permitted if all database files are in Azure Storage.
3074	16	No	Failed while getting attributes for the file snapshot %.*ls. Error code %ld.
3075	16	No	Device name '%.*ls' is not a valid MOVE target when restoring from a File Snapshot Backup.
3076	16	No	File Snapshot Backup is only permitted with a single backup device and no additonal mirrored devices.
3077	10	No	File snapshot %.*ls not found.
3078	16	No	The file name "%ls" is invalid as a backup device name for the specified device type. Reissue the BACKUP statement with a valid file name and device type.
3079	16	No	Could not find the blob file %.*ls. Please make sure that the file name points to a valid blob file.
3080	16	No	Invalid Backup Path. The length of the default backup path provided exceeds supported limit (maximum length is: %d). Correct the default backup path.
3081	16	No	%.*ls '%.*ls' was previously suspended for snapshot backup.
3082	16	No	%.*ls '%.*ls' is not suspended for snapshot backup.
3083	10	No	Database '%.*ls' acquired suspend locks in session %d.
3084	10	No	Database '%.*ls' released suspend locks in session %d.
3085	16	No	Database '%.*ls' did not acquire the necessary suspend locks to freeze the database.
3086	10	No	%.*ls '%.*ls' successfully suspended for snapshot backup in session %d.
3087	10	No	%.*ls '%.*ls' originally suspended for snapshot backup in session %d successfully resumed in session %d.
3088	16	No	%.*ls '%.*ls' with dbid %d failed to resume in session %d.
3089	10	No	%.*ls '%.*ls' cancelled current resume operation as another resume operation is already in progress.
3090	16	No	%.*ls '%.*ls' snapshot backup in progress.
3091	16	No	Database '%.*ls' is not allowed to be suspended for snapshot backup.
3092	16	No	Database '%.*ls' is specified multiple times in the group snapshot backup statement.
3093	16	No	Database count changed while performing snapshot backup. (Expected: %d, Actual: %d).
3094	16	No	Server '%.*ls' has no user databases to suspend for snapshot backup.
3095	16	No	The backup cannot be performed because 'ENCRYPTION' was requested after the media was formatted with an incompatible structure. To append to this media set, either omit 'ENCRYPTION' or create a new media set by using WITH FORMAT in your BACKUP statement. If you use WITH FORMAT on an existing media set, all its backup sets will be overwritten.
3096	16	No	The Certificate specified for backup encryption has expired.
3097	16	No	The Backup cannot be performed because the existing media set is formatted with an incompatible version.
3098	16	No	The backup cannot be performed because '%ls' was requested after the media was formatted with an incompatible structure. To append to this media set, either omit '%ls' or specify '%ls'. Alternatively, you can create a new media set by using WITH FORMAT in your BACKUP statement. If you use WITH FORMAT on an existing media set, all its backup sets will be overwritten.
3099	16	No	Backup Encryption options were specified, Backup Encryption support has not been enabled on this version.
3101	16	No	Exclusive access could not be obtained because the database is in use.
3102	16	No	%ls cannot process database '%ls' because it is in use by this session. It is recommended that the master database be used when performing this operation.
3103	16	No	A partial restore sequence cannot be initiated by this command. To initiate a partial restore sequence, use the WITH PARTIAL clause of the RESTORE statement and provide a backup set which includes a full copy of at least the primary data file. The WITH PARTIAL clause of the RESTORE statement may not be used for any other purpose.
3104	16	No	RESTORE cannot operate on database '%ls' because it is configured for database mirroring or has joined an availability group. If you intend to restore the database, use ALTER DATABASE to remove mirroring or to remove the database from its availability group.
3105	16	No	RESTORE cannot restore any more pages into file '%ls' because the maximum number of pages (%d) are already being restored. Either complete the restore sequence for the existing pages, or use RESTORE FILE to restore all pages in the file.
3106	16	No	The filegroup "%ls" is ambiguous. The identity in the backup set does not match the filegroup that is currently defined in the online database. To force the use of the filegroup in the backup set, take the database offline and then reissue the RESTORE command.
3107	16	No	The file "%ls" is ambiguous. The identity in the backup set does not match the file that is currently defined in the online database. To force the use of the file in the backup set, take the database offline and then reissue the RESTORE command.
3108	16	No	To restore the master database, the server must be running in single-user mode. For information on starting in single-user mode, see "How to: Start an Instance of SQL Server (sqlservr.exe)" in Books Online.
3109	16	No	Master can only be restored and fully recovered in a single step using a full database backup. Options such as NORECOVERY, STANDBY, and STOPAT are not supported.
3110	14	No	User does not have permission to RESTORE database '%.*ls'.
3111	16	No	Page %S_PGID is a control page which cannot be restored in isolation. To repair this page, the entire file must be restored.
3112	16	No	Cannot restore any database other than master when the server is in single user mode.
3113	16	No	Invalid data was detected.
3115	16	No	The database is using the simple recovery model. It is not possible to restore a subset of the read-write data.
3116	16	No	The supplied backup is not on the same recovery path as the database, and is ineligible for use for an online file restore.
3117	16	No	The log or differential backup cannot be restored because no files are ready to rollforward.
3118	16	No	The database "%ls" does not exist. RESTORE can only create a database when restoring either a full backup or a file backup of the primary file.
3119	16	No	Problems were identified while planning for the RESTORE statement. Previous messages provide details.
3120	16	No	This backup set will not be restored because all data has already been restored to a point beyond the time covered by this backup set.
3121	16	No	The file "%ls" is on a recovery path that is inconsistent with application of this backup set. RESTORE cannot continue.
3122	16	No	File initialization failed. RESTORE cannot continue.
3123	16	No	Invalid database name '%.*ls' specified for backup or restore operation.
3125	16	No	The database is using the simple recovery model. The data in the backup it is not consistent with the current state of the database. Restoring more data is required before recovery is possible. Either restore a full file backup taken since the data was marked read-only, or restore the most recent base backup for the target data followed by a differential file backup.
3127	16	Yes	The file '%.*ls' of restored database '%ls' is being left in the defunct state because the database is using the simple recovery model and the file is marked for read-write access. Therefore, only read-only files can be recovered by piecemeal restore.
3128	16	No	File '%ls' has an unsupported page size (%d).
3129	16	No	The contents of the file "%ls" are not consistent with a transition into the restore sequence. A restore from a backup set may be required.
3130	10	No	The filegroup "%ls" is selected. At the time of backup it was known by the name "%ls"'. RESTORE will continue operating upon the renamed filegroup.
3131	10	No	The file "%ls" is selected. At the time of backup it was known by the name "%ls". RESTORE will continue operating upon the renamed file.
3132	16	No	The media set has %d media families but only %d are provided. All members must be provided.
3133	16	No	The volume on device "%ls" is sequence number %d of media family %d, but sequence number %d of media family %d is expected. Check that the device specifications and loaded media are correct.
3134	10	Yes	The differential base attribute for file '%ls' of database '%ls' has been reset because the file has been restored from a backup taken on a conflicting recovery path. The restore was allowed because the file was read-only and was consistent with the current status of the database. Any future differential backup of this file will require a new differential base.
3135	16	No	The backup set in file '%ls' was created by %hs and cannot be used for this restore operation.
3136	16	No	This differential backup cannot be restored because the database has not been restored to the correct earlier state.
3137	16	No	Database cannot be reverted. Either the primary or the snapshot names are improperly specified, all other snapshots have not been dropped, or there are missing files.
3138	16	No	The database cannot be reverted because FILESTREAM BLOBs are present.
3139	16	No	Restore to snapshot is not allowed with the master database.
3140	16	No	Could not adjust the space allocation for file '%ls'.
3141	16	No	The database to be restored was named '%ls'. Reissue the statement using the WITH REPLACE option to overwrite the '%ls' database.
3142	16	No	File "%ls" cannot be restored over the existing "%ls". Reissue the RESTORE statement using WITH REPLACE to overwrite pre-existing files, or WITH MOVE to identify an alternate location.
3143	16	No	The data set on device '%ls' is not a SQL Server backup set.
3144	16	No	File '%.*ls' was not backed up in file %d on device '%ls'. The file cannot be restored from this backup set.
3145	16	No	The STOPAT option is not supported for databases that use the SIMPLE recovery model.
3147	16	No	Backup and restore operations are not allowed on database tempdb.
3148	16	No	This RESTORE statement is invalid in the current context. The 'Recover Data Only' option is only defined for secondary filegroups when the database is in an online state. When the database is in an offline state filegroups cannot be specified.
3149	16	No	The file or filegroup "%ls" is not in a valid state for the "Recover Data Only" option to be used. Only secondary files in the OFFLINE or RECOVERY_PENDING state can be processed.
3150	10	No	The master database has been successfully restored. Shutting down SQL Server.
3151	21	Yes	Failed to restore master database. Shutting down SQL Server. Check the error logs, and rebuild the master database. For more information about how to rebuild the master database, see SQL Server Books Online.
3153	16	No	The database is already fully recovered.
3154	16	No	The backup set holds a backup of a database other than the existing '%ls' database.
3155	16	No	The RESTORE operation cannot proceed because one or more files have been added or dropped from the database since the backup set was created.
3156	16	No	File '%ls' cannot be restored to '%ls'. Use WITH MOVE to identify a valid location for the file.
3159	16	No	The tail of the log for the database "%ls" has not been backed up. Use BACKUP LOG WITH NORECOVERY to backup the log if it contains work you do not want to lose. Use the WITH REPLACE or WITH STOPAT clause of the RESTORE statement to just overwrite the contents of the log.
3161	16	No	The primary file is unavailable. It must be restored or otherwise made available.
3163	16	No	The transaction log was damaged. All data files must be restored before RESTORE LOG can be attempted.
3165	16	No	Database '%ls' was restored, however an error was encountered while replication was being restored/removed. The database has been left offline. See the topic MSSQL_ENG003165 in SQL Server Books Online.
3166	16	No	RESTORE DATABASE could not drop database '%ls'. Drop the database and then reissue the RESTORE DATABASE statement.
3167	16	No	RESTORE could not start database '%ls'.
3168	16	No	The backup of the system database on the device %ls cannot be restored because it was created by a different version of the server (%ls) than this server (%ls).
3169	16	No	The database was backed up on a server running database version %d. That version is incompatible with this server, which supports version %d. Either restore the database on a server that supports the backup, or use a backup that is compatible with this server.
3170	16	No	The STANDBY filename is invalid.
3171	16	No	File %ls is defunct and cannot be restored into the online database.
3172	16	No	Filegroup %ls is defunct and cannot be restored into the online database.
3173	16	No	The STOPAT clause provided with this RESTORE statement indicates that the tail of the log contains changes that must be backed up to reach the target point in time. The tail of the log for the database "%ls" has not been backed up. Use BACKUP LOG WITH NORECOVERY to back up the log, or use the WITH REPLACE clause in your RESTORE statement to overwrite the tail of the log.
3174	16	No	The file '%ls' cannot be moved by this RESTORE operation.
3175	10	No	RESTORE FILEGROUP="%ls" was specified, but not all of its files are present in the backup set. File "%ls" is missing. RESTORE will continue, but if you want all files to be restored, you must restore other backup sets.
3176	16	No	File '%ls' is claimed by '%ls'(%d) and '%ls'(%d). The WITH MOVE clause can be used to relocate one or more files.
3178	16	No	File %ls is not in the correct state to have this differential backup applied to it.
3179	16	No	The system database cannot be moved by RESTORE.
3180	16	No	This backup cannot be restored using WITH STANDBY because a database upgrade is needed. Reissue the RESTORE without WITH STANDBY.
3181	10	No	Attempting to restore this backup may encounter storage space problems. Subsequent messages will provide details.
3182	16	No	The backup set cannot be restored because the database was damaged when the backup occurred. Salvage attempts may exploit WITH CONTINUE_AFTER_ERROR.
3183	16	No	RESTORE detected an error on page (%d:%d) in database "%ls" as read from the backup set.
3184	10	No	RESTORE WITH CONTINUE_AFTER_ERROR was successful but some damage was encountered. Inconsistencies in the database are possible.
3185	16	No	RESTORE cannot apply this backup set because the database is suspect. Restore a backup set that repairs the damage.
3186	16	No	The backup set has been damaged. RESTORE will not attempt to apply this backup set.
3187	16	No	RESTORE WITH CHECKSUM cannot be specified because the backup set does not contain checksum information.
3188	10	No	The backup set was written with damaged data by a BACKUP WITH CONTINUE_AFTER_ERROR.
3189	16	No	Damage to the backup set was detected.
3190	16	No	Filegroup '%ls' cannot be restored because it does not exist in the backup set.
3191	16	No	Restore cannot continue because file '%ls' cannot be written. Ensure that all files in the database are writable.
3192	10	No	Restore was successful but deferred transactions remain. These transactions cannot be resolved because there are data that is unavailable. Either use RESTORE to make that data available or drop the filegroups if you never need this data again. Dropping the filegroup results in a defunct filegroup.
3193	16	No	Restore Log operations are not permitted for a Log Backup with FILE_SNAPSHOT if bulk operations were present during the backup period. The Restore can be accomplished by issuing Restore Database from this archive.
3194	16	No	Page %S_PGID is beyond the end of the file. Only pages that are in the current range of the file can be restored.
3195	16	No	Page %S_PGID cannot be restored from this backup set. RESTORE PAGE can only be used from full backup sets or from the first log or differential backup taken since the file was added to the database.
3196	16	No	RESTORE master WITH SNAPSHOT is not supported. To restore master from a snapshot backup, stop the service and copy the data and log file.
3197	10	Yes	I/O is frozen on database %ls. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup.
3198	10	Yes	I/O was resumed on database %ls. No user action is required.
3199	16	No	RESTORE requires MAXTRANSFERSIZE=%u but %u was specified.
3201	16	No	Cannot open backup device '%ls'. Operating system error %ls.
3202	16	No	Write on "%ls" failed: %ls
3203	16	No	Read on "%ls" failed: %ls
3204	16	No	The backup or restore was aborted.
3205	16	No	Too many backup devices specified for backup or restore; only %d are allowed.
3206	16	No	Backup device '%.*ls' does not exist. To view existing backup devices, use the sys.backup_devices catalog view. To create a new backup device use either sp_addumpdevice or SQL Server Management Studio.
3207	16	No	Backup or restore requires at least one backup device. Rerun your statement specifying a backup device.
3208	16	No	Unexpected end of file while reading beginning of backup set. Confirm that the media contains a valid SQL Server backup set, and see the console error log for more details.
3209	16	No	Operation is not supported on user instances.
3210	16	No	The mirror member in drive "%ls" is inconsistent with the mirror member in drive "%ls".
3211	10	No	%d percent processed.
3212	16	No	The mirror device "%ls" and the mirror device "%ls" have different device specifications.
3213	16	No	Unable to unload one or more tapes. See the error log for details.
3214	16	No	Too many backup mirrors are specified. Only %d are allowed.
3215	16	No	Use WITH FORMAT to create a new mirrored backup set.
3216	16	No	RESTORE REWINDONLY is only applicable to tape devices.
3217	16	No	Invalid value specified for %ls parameter.
3218	16	No	Backup mirroring is not available in this edition of SQL Server. See Books Online for more details on feature support in different SQL Server editions.
3219	16	No	The file or filegroup "%.*ls" cannot be selected for this operation.
3220	16	No	The specified URL points to a Block Blob. Backup and Restore operations on Block Blobs are not supported when WITH CREDENTIAL syntax is used.
3221	16	No	The ReadFileEx system function executed on file '%ls' only read %d bytes, expected %d.
3222	16	No	The WriteFileEx system function executed on file '%ls' only wrote %d bytes, expected %d.
3223	16	No	Backup To URL failed to write status messages to the operating system error log.
3224	16	No	Cannot create worker thread.
3225	16	No	Use of WITH CREDENTIAL syntax is not valid for credentials containing a Shared Access Signature.
3226	16	No	Failed to create snapshot for file "%ls".
3227	16	No	The backup media on "%ls" is part of media family %d which has already been processed on "%ls". Ensure that backup devices are correctly specified. For tape devices, ensure that the correct volumes are loaded.
3228	16	No	Writing snapshot metadata to backup set for file "%ls" failed due to invalid format.
3229	16	No	Request for device '%ls' timed out.
3230	16	No	Operation on device '%ls' exceeded retry count.
3231	16	No	The media loaded on "%ls" is formatted to support %d media families, but %d media families are expected according to the backup device specification.
3232	16	No	The volume mounted on "%ls" does not have the expected backup set identity. The volume may be obsolete due to a more recent overwrite of this media family. In that case, locate the correct volume with sequence number %d of media family %d.
3233	16	No	Invalid Identity Specified for the S3 Credential. Credential Identity should be S3 Access Key.
3234	16	No	Logical file '%.*ls' is not part of database '%ls'. Use RESTORE FILELISTONLY to list the logical file names.
3235	16	No	The file "%.*ls" is not part of database "%ls". You can only list files that are members of this database.
3236	16	No	Write to S3 object storage device %ls failed. Device has reached its limit of %d allowed parts.
3238	16	No	The Estimate for the Backup size exceeds the maximum allowed file size on the remote endpoint.
3239	16	No	The backup set on device '%ls' uses a feature of the Microsoft Tape Format not supported by SQL Server.
3240	16	No	Backup to mirrored media sets requires all mirrors to append. Provide all members of the set, or reformat a new media set.
3241	16	No	The media family on device '%ls' is incorrectly formed. SQL Server cannot process this media family.
3242	16	No	The file on device '%ls' is not a valid Microsoft Tape Format backup set.
3243	16	No	The media family on device '%ls' was created using Microsoft Tape Format version %d.%d. SQL Server supports version %d.%d.
3244	16	No	Descriptor block size exceeds %d bytes. Use a shorter name and/or description string and retry the operation.
3245	16	No	Could not convert a string to or from Unicode, %ls.
3246	16	No	The media family on device '%ls' is marked as nonappendable. Reissue the statement using the INIT option to overwrite the media.
3247	16	No	The volume on device '%ls' has the wrong media sequence number (%d). Remove it and insert volume %d.
3249	16	No	The volume on device '%ls' is a continuation volume for the backup set. Remove it and insert the volume holding the start of the backup set.
3250	16	No	The value '%d' is not within range for the %ls parameter.
3251	10	No	The media family on device '%ls' is complete. The device is now being reused for one of the remaining families.
3252	16	No	Failed to copy snapshot with name '%ls', timestamp '%ls' to destination '%ls'. Error returned '%ls'.
3253	16	No	The block size parameter must supply a value that is a power of 2.
3254	16	No	The volume on device '%ls' is empty.
3255	16	No	The data set on device '%ls' is a SQL Server backup set not compatible with this version of SQL Server.
3256	16	No	The backup set on device '%ls' was terminated while it was being created and is incomplete. RESTORE sequence is terminated abnormally.
3257	16	No	There is insufficient free space on disk volume '%ls' to create the database. The database requires %I64u additional free bytes, while only %I64u bytes are available.
3258	16	No	The volume on the device "%ls" is not part of the media set that is currently being processed. Ensure that the backup devices are loaded with the correct media.
3259	16	No	Failed to copy blob with name '%ls', to destination '%ls'. Error returned '%ls'.
3260	16	No	An internal buffer has become full.
3261	16	No	SQL Server cannot use the virtual device configuration.
3262	10	No	The backup set on file %d is valid.
3263	16	No	Cannot use the volume on device '%ls' as a continuation volume. It is sequence number %d of family %d for the current media set. Insert a new volume, or sequence number %d of family %d for the current set.
3264	16	No	The operation did not proceed far enough to allow RESTART. Reissue the statement without the RESTART qualifier.
3265	16	No	The login has insufficient authority. Membership of the sysadmin role is required to use VIRTUAL_DEVICE with BACKUP or RESTORE.
3266	16	Yes	The backup data at the end of "%ls" is incorrectly formatted. Backup sets on the media might be damaged and unusable. To determine the backup sets on the media, use RESTORE HEADERONLY. To determine the usability of the backup sets, run RESTORE VERIFYONLY. If all of the backup sets are incomplete, reformat the media using BACKUP WITH FORMAT, which destroys all the backup sets.
3267	16	No	Insufficient resources to create UMS scheduler.
3268	16	No	Cannot use the backup file '%ls' because it was originally formatted with sector size %d and is now on a device with sector size %d.
3269	16	No	Cannot restore the file '%ls' because it was originally written with sector size %d; '%ls' is now on a device with sector size %d.
3270	16	No	An internal consistency error has occurred. This error is similar to an assert. Contact technical support for assistance.
3271	16	No	A nonrecoverable I/O error occurred on file "%ls:" %ls.
3272	16	No	The '%ls' device has a hardware sector size of %d, but the block size parameter specifies an incompatible override value of %d. Reissue the statement using a compatible block size.
3273	16	No	The ambiguity for master has be detected. please specify PHYSMASTER or replicatedmaster database explicitly in action '%ls'.
3276	16	No	WITH SNAPSHOT can be used only if the backup set was created WITH SNAPSHOT.
3277	16	No	WITH SNAPSHOT must be used with only one device.
3278	16	No	Failed to encrypt string %ls
3279	16	No	Access is denied due to a password failure
3280	16	No	Backups on raw devices are not supported. '%ls' is a raw device.
3281	10	No	Released and initiated rewind on '%ls'.
3283	16	No	The file "%ls" failed to initialize correctly. Examine the error logs for more details.
3284	16	No	Filemark on device '%ls' is not aligned. Re-issue the Restore statement with the same blocksize used to create the backupset: '%d' looks like a possible value.
3285	10	No	Filemark on device '%ls' appears not to be aligned. The restore operation will proceed using less efficient I/O. To avoid this, re-issue the Restore statement with the same blocksize used to create the backupset: '%d' looks like a possible value.
3286	16	No	Backup failed because there is a mismatch in file metadata for file %d.
3287	16	No	The file ID %d on device '%ls' is incorrectly formed and can not be read.
3288	16	No	Credential name %.*ls does not exist or user does not have permission to access it.
3289	16	No	A Backup device of type URL was specified without a Credential, Backup/Restore operation cannot proceed.
3290	16	No	Backup to URL received an exception from the remote endpoint. Exception Message: %.*ls
3291	16	No	URL device type was specified, and a disallowed option %ls was specified.
3292	16	No	A failure occurred while attempting to execute Backup or Restore with a URL device specified. Consult the operating system error log for details.
3293	16	No	An error occurred while Backup/Restore to URL was initializing. Error message: %.*ls.
3294	16	No	Use of the URL device type is limited to a single device during Backup and Restore operations.
3295	16	No	Backup To URL error: Exclusive access to the file %.*ls could not be obtained.
3296	16	No	The file %.*ls exists on the remote endpoint, and WITH FORMAT was not specified. Backup cannot proceed.
3297	16	No	The URL provided does not meet specified requirements. The URL must be either resolvable as an absolute or relative URI, has or can be composed as an HTTP or HTTPS scheme, and cannot contain a query component.
3298	16	No	Backup/Restore to URL device error: %.*ls.
3299	16	No	BackupToUrl initiated.
3301	21	Yes	The transaction log contains a record (logop %d) that is not valid. The log has been corrupted. Restore the database from a full backup, or repair the database.
3302	21	Yes	Redoing of logged operations in database '%.*ls' failed to reach end of log at log record ID %S_LSN. This indicates corruption around log record ID %S_LSN. Restore the database from a full backup, or repair the database.
3303	10	Yes	Remote harden of transaction '%.*ls' (ID 0x%016I64x %ls) started at %S_DATE in database '%ls' at LSN %S_LSN failed.
3313	21	Yes	During redoing of a logged operation in database '%.*ls' (page %S_PGID if any), an error occurred at log record ID %S_LSN. Typically, the specific failure is previously logged as an error in the operating system error log. Restore the database from a full backup, or repair the database.
3314	21	Yes	During undoing of a logged operation in database '%.*ls' (page %S_PGID if any), an error occurred at log record ID %S_LSN. Typically, the specific failure is logged previously as an error in the operating system error log. Restore the database or file from a backup, or repair the database.
3315	21	Yes	During rollback, the following process did not hold an expected lock: process %d with mode %d at level %d for row %S_RID in database '%.*ls' under transaction %S_XID. Restore a backup of the database, or repair the database.
3316	21	Yes	During undo of a logged operation in database '%.*ls', an error occurred at log record ID %S_LSN. The row was not found. Restore the database from a full backup, or repair the database.
3401	10	Yes	Errors occurred during recovery while rolling back a transaction. The transaction was deferred. Restore the bad page or file, and re-run recovery.
3402	10	Yes	The database '%ls' is marked %ls and is in a state that does not allow recovery to be run.
3403	10	Yes	Recovering only master database because traceflag 3608 was specified. This is an informational message only. No user action is required.
3404	10	Yes	Failed to check for new installation or a renamed server at startup. The logic for this check has failed unexpectedly. Run setup again, or fix the problematic registry key.
3406	10	Yes	%d transactions rolled forward in database '%.*ls' (%d:%d). This is an informational message only. No user action is required.
3407	10	Yes	%d transactions rolled back in database '%.*ls' (%d:%d). This is an informational message only. No user action is required.
3408	10	Yes	Recovery is complete. This is an informational message only. No user action is required.
3409	16	Yes	Performance counter shared memory setup failed with error %d. Reinstall sqlctr.ini for this instance, and ensure that the instance login account has correct registry permissions.
3410	10	Yes	Data in filegroup %s is offline, and deferred transactions exist. Use RESTORE to recover the filegroup, or drop the filegroup if you never intend to recover it. Log truncation cannot occur until this condition is resolved.
3411	21	Yes	Configuration block version %d is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
3412	10	Yes	Warning: The server instance was started using minimal configuration startup option (-f). Starting an instance of SQL Server with minimal configuration places the server in single-user mode automatically. After the server has been started with minimal configuration, you should change the appropriate server option value or values, stop, and then restart the server.
3413	21	Yes	Database ID %d. Could not mark database as suspect. Getnext NC scan on sys.databases.database_id failed. Refer to previous errors in the error log to identify the cause and correct any associated problems.
3414	10	Yes	An error occurred during recovery, preventing the database '%ls' (%d:%d) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
3415	16	Yes	Database '%.*ls' cannot be upgraded because it is read-only, has read-only files or the user does not have permissions to modify some of the files. Make the database or files writeable, and rerun recovery.
3416	16	Yes	The server contains read-only files that must be made writable before the server can be recollated.
3417	21	Yes	Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books Online.
3418	10	Yes	Recovery is unable to defer error %d. Errors can only be deferred in databases using the full recovery model and an active backup log chain.
3419	16	Yes	Recovery for database '%.*ls' is being skipped because it requires an upgrade but is marked for Standby. Use RESTORE DATABASE WITH NORECOVERY to take the database back to a Restoring state and continue the restore sequence.
3420	21	Yes	Database snapshot '%ls' has failed an IO operation and is marked suspect. It must be dropped and recreated.
3421	10	Yes	Recovery completed for database %ls (database ID %d) in %I64d second(s) (analysis %I64d ms, redo %I64d ms, undo %I64d ms [system undo %I64d ms, regular undo %I64d ms].) ADR-enabled=%d, Is primary=%d, OL-Enabled=%d. This is an informational message only. No user action is required.
3422	10	Yes	Database %ls was shutdown due to error %d in routine '%hs'. Restart for non-snapshot databases will be attempted after all connections to the database are aborted.
3423	10	Yes	Info: The server instance was started using multiuser, minimal configuration startup option (-M).
3429	10	Yes	Recovery could not determine the outcome of a cross-database transaction %S_XID, named '%.*ls', in database '%.*ls' (database ID %d:%d). The coordinating database (database ID %d:%d) was unavailable. The transaction was assumed to be committed. If the transaction was not committed, you can retry recovery when the coordinating database is available.
3431	21	Yes	Could not recover database '%.*ls' (database ID %d) because of unresolved transaction outcomes. Microsoft Distributed Transaction Coordinator (MS DTC) transactions were prepared, but MS DTC was unable to determine the resolution. To resolve, either fix MS DTC, restore from a full backup, or repair the database.
3434	20	Yes	Cannot change sort order or locale. An unexpected failure occurred while trying to reindex the server to a new collation. SQL Server is shutting down. Restart SQL Server to continue with the sort order unchanged. Diagnose and correct previous errors and then retry the operation.
3437	21	Yes	An error occurred while recovering database '%.*ls'. Unable to connect to Microsoft Distributed Transaction Coordinator (MS DTC) to check the completion status of transaction %S_XID. Fix MS DTC, and run recovery again.
3441	21	Yes	During startup of warm standby database '%.*ls' (database ID %d), its standby file ('%ls') was inaccessible to the RESTORE statement. The operating system error was '%ls'. Diagnose the operating system error, correct the problem, and retry startup.
3443	21	Yes	Database '%ls' (database ID %d:%d) was marked for standby or read-only use, but has been modified. The RESTORE LOG statement cannot be performed. Restore the database from a backup.
3445	21	Yes	File '%ls' is not a valid undo file for database '%.*ls (database ID %d). Verify the file path, and specify the correct file.
3446	16	No	Primary log file is not available for database '%ls' (%d:%d). The log cannot be backed up.
3447	16	No	Could not activate or scan all of the log files for database '%.*ls'.
3448	21	Yes	Rollback encountered a page with a log sequence number (LSN) less than the original log record LSN. Could not undo log record %S_LSN, for transaction ID %S_XID, on page %S_PGID, database '%ls' (%d:%d). Page information: LSN = %S_LSN, type = %ld. Log information: OpCode = %ld, context %ld. Restore or repair the database.
3449	21	Yes	SQL Server must shut down in order to recover a database (database ID %d). The database is either a user database that could not be shut down or a system database. Restart SQL Server. If the database fails to recover after another startup, repair or restore the database.
3450	10	Yes	Recovery of database '%.*ls' (%d) is %d%% complete (approximately %d seconds remain). Phase %d of 3. This is an informational message only. No user action is required.
3452	10	Yes	Recovery of database '%.*ls' (%d) detected possible identity value inconsistency in table ID %d. Run DBCC CHECKIDENT ('%.*ls').
3453	16	No	This version cannot redo any index creation or non-logged operation done by SQL Server 7.0. Further roll forward is not possible.
3454	10	Yes	Recovery is writing a checkpoint in database '%.*ls' (%d). This is an informational message only. No user action is required.
3456	21	Yes	Could not redo log record %S_LSN, for transaction ID %S_XID, on page %S_PGID, allocation unit %I64d, database '%.*ls' (database ID %d). Page: LSN = %S_LSN, allocation unit = %I64d, type = %ld. Log: OpCode = %ld, context %ld, PrevPageLSN: %S_LSN. Restore from a backup of the database, or repair the database.
3457	21	Yes	Transactional file system resource manager '%.*ls' failed to recover. For more information, see the accompanying error message, which determines the appropriate user action.
3458	16	No	Recovery cannot scan database "%.*ls" for dropped allocation units because an unexpected error has occurred. These allocation units cannot be cleaned up.
3459	16	No	Recovery of database "%.*ls" failed to redo a file add for file "%.*ls". Please delete the file and retry.
3460	21	Yes	Failed to shutdown a database (database ID %d) that contains memory-optimized data. Restart SQL Server to bring the database to a consistent state. If the database fails to recover after restart, repair or restore the database.
3461	21	Yes	Failed to wait for XTP %ls to complete during recovery.
3462	10	Yes	Redo observed a higher LSN on the PFS page %S_PGID for transaction ID %S_XID, database '%.*ls' (database ID %d). Redo LSN: %S_LSN, Page: LSN = %S_LSN, PrevPageLSN: %S_LSN. This can happen in the presence of concurrent PFS updates. No user action is required.
3463	21	Yes	An error occurred while recovering database '%.*ls'. Transaction outcome could not be resolved.
3464	16	Yes	An error occurred while resolving the deferred transaction. Transaction outcome: %d, IsDeferred: %ls.
3465	16	Yes	An error occurred while resolving the deferred transaction. Transaction not found.
3466	10	No	Restore was successful but deferred transactions remain. These transactions cannot be resolved because there are data or keys in the enclave that is unavailable. Either use sp_enclave_send_keys to send keys to the enclave, or use RESTORE to make that data available or drop the filegroups if you never need this data again. Dropping the filegroup results in a defunct filegroup.
3467	10	No	Restore was successful but deferred transactions remain. These transactions cannot be resolved because there are data or keys in the enclave that is unavailable. For keys, since there is no enclave configured, SQL may resolve deferred transactions by invalidating indexes on encrypted columns; please check the error log.For the data, either use RESTORE to make that data available or drop the filegroups if you never need this data again. Dropping the filegroup results in a defunct filegroup.
3468	21	Yes	An error occurred while attempting to apply a log record. This could indicate log or database corruption. Additional messages in the SQL Server error log may provide more detail.
3469	21	No	Restore failed due to items not being found in the expected restore pipeline queues.
3505	14	No	Only the owner of database "%.*ls" or someone with relevant permissions can run the CHECKPOINT statement.
3604	10	No	Duplicate key was ignored.
3605	16	No	Schema verification failed for database '%.*ls'.
3606	10	No	Arithmetic overflow occurred.
3607	10	No	Division by zero occurred.
3608	16	No	Cannot allocate a GUID for the token.
3609	16	No	The transaction ended in the trigger. The batch has been aborted.
3611	10	No	%hs SQL Server Execution Times:%hs CPU time not measured under fiber mode, elapsed time = %lu ms.
3612	10	No	%hs SQL Server Execution Times:%hs CPU time = %lu ms, elapsed time = %lu ms.
3613	10	No	SQL Server parse and compile time: %hs CPU time = %lu ms, elapsed time = %lu ms.
3615	10	No	Table '%.*ls'. Scan count %d, logical reads %d, physical reads %d, page server reads %d, read-ahead reads %d, page server read-ahead reads %d, lob logical reads %d, lob physical reads %d, lob page server reads %d, lob read-ahead reads %d, lob page server read-ahead reads %d.
3616	16	No	An error was raised during trigger execution. The batch has been aborted and the user transaction, if any, has been rolled back.
3619	10	Yes	Could not write a checkpoint record in database %ls because the log is out of space. Contact the database administrator to truncate the log or allocate more space to the database log files.
3620	10	Yes	Automatic checkpointing is disabled in database '%.*ls' because the log is out of space. Automatic checkpointing will be enabled when the database owner successfully checkpoints the database. Contact the database owner to either truncate the log file or add more disk space to the log. Then retry the CHECKPOINT statement.
3621	10	No	The statement has been terminated.
3622	10	No	Warning: An invalid floating point operation occurred.
3623	16	No	An invalid floating point operation occurred.
3624	20	Yes	A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a Hotfix from Technical Support.
3625	20	Yes	'%hs' is not yet implemented.
3627	17	Yes	New parallel operation cannot be started due to too many parallel operations executing at this time. Use the "max worker threads" configuration option to increase the number of allowable threads, or reduce the number of parallel operations running on the system.
3628	24	Yes	The Database Engine received a floating point exception from the operating system while processing a user request. Try the transaction again. If the problem persists, contact your system administrator.
3633	16	Yes	The operating system returned the error '%ls' while attempting '%ls' on '%ls' at '%hs'(%d).
3634	16	Yes	The operating system returned the error '%ls' while attempting '%ls' on '%ls'.
3635	16	Yes	An error occurred while processing '%ls' metadata for database id %d, file id %d, and transaction='%.*ls'. Additional Context='%ls'. Location='%hs'(%d). Retry the operation; if the problem persists, contact the database administrator to review locking and memory configurations. Review the application for possible deadlock conflicts.
3636	16	No	An error occurred while processing '%ls' metadata for database id %d file id %d.
3637	16	No	A parallel operation cannot be started from a DAC connection.
3641	10	No	Total logical reads %lu, physical reads %lu, remote reads %lu, writes %lu.
3642	10	No	Table '%.*ls'. Segment reads %u, segment skipped %u.
3643	16	No	The operation elapsed time exceeded the maximum time specified for this operation. The execution has been stopped.
3644	10	No	Prefaulter task failed for file %ls with error %d.
3701	11	No	Cannot %S_MSG the %S_MSG '%.*ls', because it does not exist or you do not have permission.
3702	16	No	Cannot drop database "%.*ls" because it is currently in use.
3703	16	No	Cannot detach the %S_MSG '%.*ls' because it is currently in use.
3705	16	No	Cannot use DROP %ls with '%.*ls' because '%.*ls' is a %S_MSG. Use %ls.
3706	16	No	Cannot %S_MSG a database snapshot.
3707	16	No	Cannot detach a suspect or recovery pending database. It must be repaired or dropped.
3708	16	No	Cannot %S_MSG the %S_MSG '%.*ls' because it is a system %S_MSG.
3709	16	No	Cannot %S_MSG the database while the database snapshot "%.*ls" refers to it. Drop that database first.
3710	16	No	Cannot detach an opened database when the server is in minimally configured mode.
3716	16	No	The %S_MSG '%.*ls' cannot be dropped because it is bound to one or more %S_MSG.
3717	16	No	Cannot drop a default constraint by DROP DEFAULT statement. Use ALTER TABLE to drop a constraint default.
3718	11	No	Could not drop index '%.*ls' because the table or clustered index entry cannot be found in the sysindexes system table.
3721	16	No	Type '%.*ls' cannot be renamed because it is being referenced by object '%.*ls'.
3722	16	No	Task has been aborted, but %S_MSG of the %S_MSG '%.*ls' may continue in the background. Please check whether the %S_MSG has finished successfully.
3723	16	No	An explicit DROP INDEX is not allowed on index '%.*ls'. It is being used for %ls constraint enforcement.
3724	16	No	Cannot %S_MSG the %S_MSG '%.*ls' because it is being used for replication.
3725	16	No	The constraint '%.*ls' is being referenced by table '%.*ls', foreign key constraint '%.*ls'.
3726	16	No	Could not drop object '%.*ls' because it is referenced by a FOREIGN KEY constraint.
3727	10	No	Could not drop constraint. See previous errors.
3728	16	No	'%.*ls' is not a constraint.
3729	16	No	Cannot %ls '%.*ls' because it is being referenced by object '%.*ls'.
3730	16	No	Cannot drop the default constraint '%.*ls' while it is being used by a foreign key as SET DEFAULT referential action.
3732	16	No	Cannot drop type '%.*ls' because it is being referenced by object '%.*ls'. There may be other objects that reference this type.
3733	16	No	Constraint '%.*ls' does not belong to table '%.*ls'.
3734	16	No	Could not drop the primary key constraint '%.*ls' because the table has an XML or spatial index.
3735	16	No	The primary key constraint '%.*ls' on table '%.*ls' cannot be dropped because change tracking is enabled on the table. Change tracking requires a primary key constraint on the table. Disable change tracking before dropping the constraint.
3736	16	No	Cannot drop the %S_MSG '%.*ls' because it is being used for distribution.
3737	16	No	Could not delete file '%ls'. See the SQL Server error log for more information.
3738	10	No	Deleting database file '%ls'.
3739	11	No	Cannot %ls the index '%.*ls' because it is not a statistics collection.
3740	16	No	Cannot drop the %S_MSG '%.*ls' because at least part of the table resides on a read-only filegroup.
3741	16	No	Cannot drop the %S_MSG '%.*ls' because at least part of the table resides on an offline filegroup.
3743	16	No	The database '%.*ls' is enabled for database mirroring. Database mirroring must be removed before you drop the database.
3744	16	No	Only a single clause is allowed in a statement where an index is dropped online.
3745	16	No	Only a clustered index can be dropped online.
3746	16	No	Cannot drop the clustered index of view '%.*ls' because the view is being used for replication.
3747	16	No	Cannot drop a clustered index created on a view using drop clustered index clause. Clustered index '%.*ls' is created on view '%.*ls'.
3748	16	No	Cannot drop non-clustered index '%.*ls' using drop clustered index clause.
3749	16	No	Cannot drop XML Index '%.*ls' using old 'Table.Index' syntax, use 'Index ON Table' syntax instead.
3750	10	No	Warning: Index '%.*ls' on %S_MSG '%.*ls' was disabled as a result of disabling the clustered index on the %S_MSG.
3751	16	No	Cannot use SP_DROPEXTENDEDPROC or DBCC DROPEXTENDEDPROC with '%.*ls' because '%.*ls' is a %S_MSG. Use %ls.
3752	16	No	The database '%.*ls' is currently joined to an availability group. Before you can drop the database, you need to remove it from the availability group.
3754	16	No	TRUNCATE TABLE statement failed. Index '%.*ls' uses partition function '%.*ls', but table '%.*ls' uses non-equivalent partition function '%.*ls'. Index and table must use an equivalent partition function.
3755	16	No	Cannot drop a database with file snapshots on it. Please detach the database instead of dropping or delete the file snapshots and retry the drop.
3756	16	No	TRUNCATE TABLE statement failed. Index '%.*ls' is not partitioned, but table '%.*ls' uses partition function '%.*ls'. Index and table must use an equivalent partition function.
3757	16	No	WAIT_AT_LOW_PRIORITY clause is not permitted without ONLINE = ON option, for drop clustered %S_MSG '%.*ls' on Table '%.*ls'.
3758	16	No	Multiple %S_MSG cannot be dropped when WAIT_AT_LOW_PRIORITY clause is specified.
3759	16	No	%.*ls constraint '%.*ls' cannot be dropped when WAIT_AT_LOW_PRIORITY clause is used.
3760	16	No	Cannot drop index '%.*ls' on view '%.*ls' that has SNAPSHOT_MATERIALIZATION.
3761	16	No	Could not delete SBS backed file '%ls'. See the SQL Server error log for more information.
3762	16	No	Cannot drop database '%.*ls' because of temporary unavailability. Please try again later.
3763	16	No	Cannot %S_MSG the %S_MSG '%.*ls' because it is being used for Change Feed.
3764	16	No	Cannot %S_MSG the %S_MSG '%.*ls' because it is being used for Change Data Capture.
3800	16	No	Column name '%.*ls' is not sufficiently different from the names of other columns in the table '%.*ls'.
3801	10	No	Warning: The index "%.*ls" on "%.*ls"."%.*ls" may be impacted by the collation upgrade. Run DBCC CHECKTABLE.
3802	10	No	Warning: The constraint "%.*ls" on "%.*ls"."%.*ls" may be impacted by the collation upgrade. Disable and enable WITH CHECK.
3803	10	No	Warning: The index "%.*ls" on "%.*ls"."%.*ls" is disabled because the implementation of the checksum function has changed.
3804	10	No	Warning: The check constraint "%.*ls" on table "%.*ls"."%.*ls" is disabled because the implementation of the checksum function has changed.
3805	10	No	Warning: Index "%.*ls" on table "%.*ls"."%.*ls" might be corrupted because it references computed column "%.*ls" containing a non-deterministic conversion from string to date. Run DBCC CHECKTABLE to verify index. Consider using explicit CONVERT with deterministic date style such as 121. Computed column indexes referencing non-deterministic expressions can't be created in 90 compatibility mode. See Books Online topic "Creating Indexes on Computed Columns" for more information.
3806	10	No	Warning: Indexed view "%.*ls"."%.*ls" might be corrupted because it contains a non-deterministic conversion from string to date. Run DBCC CHECKTABLE to verify view. Consider using explicit CONVERT with deterministic date style such as 121. Indexed views referencing non-deterministic expressions can't be created in 90 compatibility mode. See Books Online topic "Creating Indexed Views" for more information.
3807	17	No	Create failed because all available identifiers have been exhausted.
3808	10	No	Warning: The index "%.*ls" on "%.*ls"."%.*ls" is disabled because the index is defined on a view with ignore_dup_key index option. Drop the index and, if possible, recreate it without ignore_dup_key option. You may need to change the logical structure of the view to ensure all rows are unique.
3809	16	No	Upgrade of database "%.*ls" failed because index "%.*ls" on object ID %d has the same name as that of another index on the same table.
3810	10	No	Event notification "%.*ls" on assembly is dropped.
3811	10	No	Event notification "%.*ls" on service queue is dropped as broker instance is not specified.
3812	10	No	Event notification "%.*ls" on object is dropped.
3813	16	No	Upgrade of login '%.*ls' failed because its name or sid is a duplicate of another login or server role.
3814	16	No	Local login mapped to remote login '%.*ls' on server '%.*ls' is invalid. Drop and recreate the remote login before upgrade.
3815	16	No	Local login mapped to linked login '%.*ls' on server '%.*ls' is invalid. Drop and recreate the linked login before upgrade.
3816	16	No	Upgrade of login '%.*ls' failed because its password hash is invalid. Update the login password before upgrade.
3817	10	No	Warning: The index "%.*ls" on "%.*ls"."%.*ls" was disabled because the implementation of "%.*ls" have changed.
3819	10	No	Warning: The check constraint "%.*ls" on "%.*ls"."%.*ls" was disabled and set as not trusted because the implementation of "%.*ls" have changed.
3821	10	No	Warning: The foreign key constraint "%.*ls" on "%.*ls"."%.*ls" was disabled because the implementation of '%.*ls' have changed.
3822	10	No	Warning: The heap "%.*ls"."%.*ls" has persisted computed columns that depends on a geometry or geography methods and may contain out-of-date information. Because of this, DBCC may report inconsistencies on this table. The persisted computed columns depending on geometry or geography methods should be unpersisted and persisted again to refresh the data.
3823	10	No	Warning: The object "%.*ls"."%.*ls" could not be bound and was ignored during upgrade. Consider reviewing and correcting its definition.
3827	10	No	Warning: The table "%.*ls"."%.*ls" is unavailable because it contains a persisted computed column that depends on "%.*ls", the implementation of which has changed. Rebuild the table offline and reconstruct the persisted computed column.
3830	10	No	Metadata cache coherency check for database ID(%d) did not find any inconsistency.
3851	10	No	An invalid row (%ls) was found in the system table sys.%ls%ls.
3852	10	No	Row (%ls) in sys.%ls%ls does not have a matching row (%ls) in sys.%ls%ls.
3853	10	No	Attribute (%ls) of row (%ls) in sys.%ls%ls does not have a matching row (%ls) in sys.%ls%ls.
3854	10	No	Attribute (%ls) of row (%ls) in sys.%ls%ls has a matching row (%ls) in sys.%ls%ls that is invalid.
3855	10	No	Attribute (%ls) exists without a row (%ls) in sys.%ls%ls.
3856	10	No	Attribute (%ls) exists but should not for row (%ls) in sys.%ls%ls.
3857	10	No	The attribute (%ls) is required but is missing for row (%ls) in sys.%ls%ls.
3858	10	No	The attribute (%ls) of row (%ls) in sys.%ls%ls has an invalid value.
3859	10	No	Warning: The system catalog was updated directly in database ID %d, most recently at %S_DATE.
3860	10	No	Cannot upgrade database ID 32767. This ID value is reserved for SQL Server internal use.
3862	10	No	CLR type '%.*ls'.'%.*ls' is disabled because the on disk format for this CLR type has been changed. Use DROP TYPE to remove this disabled type.
3864	23	Yes	Could not find an entry for index with ID %d on object with ID %d in database with ID %d. Possible schema corruption. Run DBCC CHECKDB.
3865	16	No	The operation on object '%.*ls' is blocked. The object is a FileTable system defined object and user modifications are not allowed.
3866	10	Yes	The operation on FileTable system defined object '%.*ls' was allowed because of traceflag settings. To prevent this informational message from appearing in the error log, use DBCC TRACEOFF to turn off the trace flag.
3867	10	No	The FileTable object '%.*ls' contains system defined constraints that cannot be modified as long as the FILETABLE_NAMESPACE option is enabled on the table. Only user defined constraints have been updated.
3868	10	No	Failed to start tempdb metadata memory-optimized mode. Continuing tempdb startup in SQL mode. Please run ALTER SERVER CONFIGURATION TEMPDB METADATA MEMORY_OPTIMIZED ON once again and restart to retry.
3869	10	No	The desired memory-optimized configuration is already set. No further action is necessary.
3870	10	No	The tempdb metadata memory-optimized configuration has been set to '%S_MSG'. Restart SQL server for the new setting to take effect.
3871	10	No	Tempdb started with memory-optimized metadata.
3872	10	No	The hybrid buffer pool memory-optimized configuration has been set to '%S_MSG'. Restart SQL server for the new setting to take effect.
3873	10	No	Hybrid buffer pool started with memory-optimized metadata.
3874	16	No	Resource pool '%.*ls' does not exist or resource governor has not been reconfigured.
3875	16	No	Internal resource pool cannot be used for tempdb
3876	16	No	Resource pool setting for tempdb failed. Retry with a valid pool.
3901	16	No	The transaction name must be specified when it is used with the mark option.
3902	16	No	The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.
3903	16	No	The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION.
3904	21	No	Cannot unsplit logical page %S_PGID in object '%.*ls', in database '%.*ls'. Both pages together contain more data than will fit on one page.
3905	16	No	The number of nested transactions has reached the maximum allowed value of 4294967296.
3906	16	No	Failed to update database "%.*ls" because the database is read-only.
3907	16	No	Transaction aborted when accessing versioned row in table '%.*ls' in database '%.*ls'. Requested versioned row was not found in persistent version store. Your database is probably out of space. Please refer to BOL on how to configure database size.
3908	16	No	Could not run BEGIN TRANSACTION in database '%.*ls' because the database is in emergency mode or is damaged and must be restarted.
3909	16	No	Session binding token is invalid.
3910	16	No	Transaction context in use by another session.
3911	16	Yes	Persistent version store is full. New version(s) could not be added. A transaction that needs to access the version store may be rolled back. Please refer to BOL on how to increase database max size.
3912	16	No	Cannot bind using an XP token while the server is not in an XP call.
3913	16	Yes	TDS reset connection protocol error. Client driver requested both ResetConnectionKeepLocalXact and ResetConnectionKeepDTCXact at the same time. This is not expected in server.
3914	16	No	The data type "%s" is invalid for transaction names or savepoint names. Allowed data types are char, varchar, nchar, varchar(max), nvarchar, and nvarchar(max).
3915	16	No	Cannot use the ROLLBACK statement within an INSERT-EXEC statement.
3916	16	No	Cannot use the COMMIT statement within an INSERT-EXEC statement unless BEGIN TRANSACTION is used first.
3917	16	No	Session is bound to a transaction context that is in use. Other statements in the batch were ignored.
3918	16	No	The statement or function must be executed in the context of a user transaction.
3919	16	No	Cannot enlist in the transaction because the transaction has already been committed or rolled back.
3920	10	No	The WITH MARK option only applies to the first BEGIN TRAN WITH MARK statement. The option is ignored.
3921	16	No	Cannot get a transaction token if there is no transaction active. Reissue the statement after a transaction has been started
3922	16	No	Cannot enlist in the transaction because the transaction does not exist.
3923	10	No	Cannot use transaction marks on database '%.*ls' with bulk-logged operations that have not been backed up. The mark is ignored.
3924	10	No	The session was enlisted in an active user transaction while trying to bind to a new transaction. The session has defected from the previous user transaction.
3925	16	No	Invalid transaction mark name. The 'LSN:' prefix is reserved.
3926	10	No	The transaction active in this session has been committed or aborted by another session.
3927	10	No	The session had an active transaction when it tried to enlist in a Distributed Transaction Coordinator transaction.
3928	16	No	The marked transaction "%.*ls" failed. A timeout occurred while attempting to place a mark in the log by committing the marked transaction. This can be caused by contention with Microsoft Distributed Transaction Coordinator (MS DTC) transactions or other local marked transaction that have prepared, but not committed or aborted. Try the operation again and if the error persists, determine the source of the contention.
3929	16	No	No distributed or bound transaction is allowed in single user database.
3930	16	No	The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.
3931	16	No	The current transaction cannot be committed and cannot be rolled back to a savepoint. Roll back the entire transaction.
3932	16	No	The save point name "%.*ls" that was provided is too long. The maximum allowed length is %d characters.
3933	16	No	Cannot promote the transaction to a distributed transaction because there is an active save point in this transaction.
3934	14	No	The current user cannot use this FILESTREAM transaction context. To obtain a valid FILESTREAM transaction context, use GET_FILESTREAM_TRANSACTION_CONTEXT.
3935	16	No	A FILESTREAM transaction context could not be initialized. This might be caused by a resource shortage. Retry the operation. Error code: 0x%x.
3936	16	No	The transaction could not be committed because an error occurred while trying to flush FILESTREAM data to disk. A file may have been open at commit time or a disk I/O error may have occurred. '%.*ls' was one of the one or more files involved. ErrorCode: 0x%x.
3937	16	No	While rolling back a transaction, an error occurred while trying to deliver a rollback notification to the FILESTREAM filter driver. Error code: 0x%0x.
3938	18	No	The transaction has been stopped because it conflicted with the execution of a FILESTREAM close operation using the same transaction. The transaction will be rolled back.
3939	16	No	An uncommittable transaction was detected at the beginning of the batch. The transaction was rolled back. This was caused by an error that occurred during the processing of a FILESTREAM request in the context of this transaction.
3940	16	No	Failed to acquire necessary locks during commit and the transaction was rolled back.
3941	16	No	The transaction cannot modify an object that is published for replication or has Change Data Capture enabled because the transaction started before replication or Change Data Capture was enabled on the database. Retry the transaction.
3947	10	No	The transaction was aborted because the secondary compute failed to catch up redo. Retry the transaction.
3948	16	No	The transaction was terminated because of the availability replica config/state change or because ghost records are being deleted on the primary and the secondary availability replica that might be needed by queries running under snapshot isolation. Retry the transaction.
3949	16	No	Transaction aborted when accessing versioned row in table '%.*ls' in database '%.*ls'. Requested versioned row was not found because the readable secondary access is not allowed for the operation that attempted to create the version. This might be timing related, so try the query again later.
3950	16	No	Version store scan timed out when attempting to read the next row. Please try the statement again later when the system is not as busy.
3951	16	No	Transaction failed in database '%.*ls' because the statement was run under snapshot isolation but the transaction did not start in snapshot isolation. You cannot change the isolation level of the transaction to snapshot after the transaction has started unless the transaction was originally started under snapshot isolation level.
3952	16	No	Snapshot isolation transaction failed accessing database '%.*ls' because snapshot isolation is not allowed in this database. Use ALTER DATABASE to allow snapshot isolation.
3953	16	No	Snapshot isolation transaction failed in database '%.*ls' because the database was not recovered when the current transaction was started. Retry the transaction after the database has recovered.
3954	16	No	Snapshot isolation transaction failed to start in database '%.*ls' because the ALTER DATABASE command that disallows snapshot isolation had started before this transaction began. The database is in transition to OFF state. You will either need to change the isolation level of the transaction or re-enable the snapshot isolation in the database.
3955	16	No	Snapshot isolation transaction failed in database '%.*ls' because the recovery was skipped for this database. You must recover the database before you can run a transaction under snapshot isolation.
3956	16	No	Snapshot isolation transaction failed to start in database '%.*ls' because the ALTER DATABASE command which enables snapshot isolation for this database has not finished yet. The database is in transition to pending ON state. You must wait until the ALTER DATABASE Command completes successfully.
3957	16	No	Snapshot isolation transaction failed in database '%.*ls' because the database did not allow snapshot isolation when the current transaction started. It may help to retry the transaction.
3958	16	No	Transaction aborted when accessing versioned row in table '%.*ls' in database '%.*ls'. Requested versioned row was not found. Your tempdb is probably out of space. Please refer to BOL on how to configure tempdb for versioning.
3959	10	Yes	Version store is full. New version(s) could not be added. A transaction that needs to access the version store may be rolled back. Please refer to BOL on how to configure tempdb for versioning.
3960	16	No	Snapshot isolation transaction aborted due to update conflict. You cannot use snapshot isolation to access table '%.*ls' directly or indirectly in database '%.*ls' to update, delete, or insert the row that has been modified or deleted by another transaction. Retry the transaction or change the isolation level for the update/delete statement.
3961	16	No	Snapshot isolation transaction failed in database '%.*ls' because the object accessed by the statement has been modified by a DDL statement in another concurrent transaction since the start of this transaction. It is disallowed because the metadata is not versioned. A concurrent update to metadata can lead to inconsistency if mixed with snapshot isolation.
3962	16	No	Bind to another transaction while executing SQL Server internal query is not supported. Check your logon trigger definition and remove any sp_bindsession usage if any. If this error is not happening during logon trigger execution, contact production support team.
3963	16	No	Transaction failed in database '%.*ls' because distributed transactions are not supported under snapshot isolation.
3964	16	No	Transaction failed because this DDL statement is not allowed inside a snapshot isolation transaction. Since metadata is not versioned, a metadata change can lead to inconsistency if mixed within snapshot isolation.
3965	16	No	The PROMOTE TRANSACTION request failed because there is no local transaction active.
3966	17	No	Transaction is rolled back when accessing version store. It was earlier marked as victim when the version store was shrunk due to insufficient space in tempdb. This transaction was marked as a victim earlier because it may need the row version(s) that have already been removed to make space in tempdb. Retry the transaction
3967	17	Yes	Insufficient space in tempdb to hold row versions. Need to shrink the version store to free up some space in tempdb. Transaction (id=%I64d xsn=%I64d spid=%d elapsed_time=%d) has been marked as victim and it will be rolled back if it accesses the version store. If the problem persists, the likely cause is improperly sized tempdb or long running transactions. Please refer to BOL on how to configure tempdb for versioning.
3968	10	No	Snapshot isolation or read committed snapshot is not available in database '%.*ls' because SQL Server was started with one or more undocumented trace flags that prevent enabling database for versioning. Transaction started with snapshot isolation will fail and a query running under read committed snapshot will succeed but will resort back to lock based read committed.
3969	16	No	Distributed transaction is not supported while running SQL Server internal query. Check your logon trigger definition and remove any distributed transaction usage if any. If this error is not happening during logon trigger execution, contact production support team.
3970	16	No	This operation conflicts with another pending operation on this transaction. The operation failed.
3971	16	No	The server failed to resume the transaction. Desc:%I64x.
3972	20	Yes	Incoming Tabular Data Stream (TDS) protocol is incorrect. Transaction Manager event has wrong length. Event type: %d. Expected length: %d. Actual length: %d.
3973	16	No	The database is currently being used by another thread under the same workspace in exclusive mode. The operation failed.
3974	16	No	The number of databases in exclusive mode usage under a workspace is limited. Because the limit has been exceeded, the operation failed.
3975	16	No	The varchar(max) data type is not supported for sp_getbindtoken. The batch has been aborted.
3976	16	No	The transaction name has the odd length %d. The batch has been aborted.
3977	16	No	The savepoint name cannot be NULL. The batch has been aborted.
3978	16	No	Beginning a new transaction after rollback to save point is not allowed.
3979	16	No	The TM request is longer than expected. The request is not processed.
3980	16	No	The request failed to run because the batch is aborted, this can be caused by abort signal sent from client, or another request is running in the same session, which makes the session busy.
3981	16	No	The transaction operation cannot be performed because there are pending requests working on this transaction.
3982	16	No	New transaction is not allowed to be started while DTC or bound transaction is active.
3983	16	No	The operation failed because the session is not single threaded.
3984	16	No	Cannot acquire a database lock during a transaction change.
3985	16	No	An error occurred during the changing of transaction context. This is usually caused by low memory in the system. Try to free up more memory.
3986	19	No	The transaction timestamps ran out. Restart the server.
3987	10	No	SNAPSHOT ISOLATION is always enabled in this database.
3988	16	No	New transaction is not allowed because there are other threads running in the session.
3989	16	No	New request is not allowed to start because it should come with valid transaction descriptor.
3990	16	No	Transaction is not allowed to commit inside of a user defined routine, trigger or aggregate because the transaction is not started in that CLR level. Change application logic to enforce strict transaction nesting.
3991	16	No	The context transaction which was active before entering user defined routine, trigger or aggregate "%.*ls" has been ended inside of it, which is not allowed. Change application logic to enforce strict transaction nesting.
3992	16	No	Transaction count has been changed from %d to %d inside of user defined routine, trigger or aggregate "%.*ls". This is not allowed and user transaction will be rolled back. Change application logic to enforce strict transaction nesting.
3993	16	No	The user transaction that has been started in user defined routine, trigger or aggregate "%.*ls" is not ended upon exiting from it. This is not allowed and the transaction will be rolled back. Change application logic to enforce strict transaction nesting.
3994	16	No	User defined routine, trigger or aggregate tried to rollback a transaction that is not started in that CLR level. An exception will be thrown to prevent execution of rest of the user defined routine, trigger or aggregate.
3995	16	No	Unknown transaction isolation level %d, valid value range is 0 to 5.
3996	16	No	Snapshot isolation level is not supported for distributed transaction. Use another isolation level or do not use distributed transaction.
3997	16	No	A transaction that was started in a MARS batch is still active at the end of the batch. The transaction is rolled back.
3998	16	No	Uncommittable transaction is detected at the end of the batch. The transaction is rolled back.
3999	17	Yes	Failed to flush the commit table to disk in dbid %d due to error %d. Check the errorlog for more information.

Related content

• Database Engine events and errors
• Understanding Database Engine Errors
• Cause and Resolution of Database Engine Errors