Database Engine events and errors (5000 to 5999)

This article contains error message numbers (between the range 5000 and 5999) and their description, which is the text of the error message from the sys.messages catalog view. Where applicable, the error number is a link to further information.

For the full range of error numbers, see the list on Database Engine events and errors.

You can query the Database Engine to see a full list of all errors, by running the following query against the sys.messages catalog view:

SELECT message_id AS Error,
    severity AS Severity,
    [Event Logged] = CASE is_event_logged
        WHEN 0 THEN 'No' ELSE 'Yes'
        END,
    [text] AS [Description]
FROM sys.messages
WHERE language_id = 1040 /* replace 1040 with the desired language ID, such as 1033 for US English */
ORDER BY message_id;

SQL Server version

This article shows events and errors (between the range 5000 and 5999) for SQL Server 2022 (16.x). If you want to view events and errors for other versions of SQL Server, see:

• SQL Server 2019
• SQL Server 2017
• SQL Server 2016

Errors and events (5000 to 5999)

Error	Severity	Event logged	Description
5001	16	No	User must be in the master database.
5002	16	No	Database '%.*ls' does not exist. Verify the name in sys.databases and try the operation again.
5003	16	No	Database mirroring cannot be enabled while the database has offline files.
5004	16	No	To use ALTER DATABASE, the database must be in a writable state in which a checkpoint can be executed.
5005	16	No	Specified recovery time of %I64d seconds is less than zero or more than the maximum of %d seconds.
5006	16	No	Could not get exclusive use of %S_MSG '%.*ls' to perform the requested operation.
5008	16	No	This ALTER DATABASE statement is not supported. Correct the syntax and execute the statement again.
5009	16	No	One or more files listed in the statement could not be found or could not be initialized.
5010	16	No	Log file name cannot be generated from a raw device. The log file name and path must be specified.
5011	14	No	User does not have permission to alter database '%.*ls', the database does not exist, or the database is not in a state that allows access checks.
5012	16	No	The name of the primary filegroup cannot be changed.
5013	16	No	The master and model databases cannot have files added to them. ALTER DATABASE was aborted.
5014	16	No	The %S_MSG '%.*ls' does not exist in database '%.*ls'.
5015	16	No	ALTER DATABASE failed. The total size specified must be 1 MB or greater.
5016	16	No	Cannot change the name of the system database %.*ls.
5017	16	No	The AUTOGROW_ALL_FILES or AUTOGROW_SINGLE_FILE property cannot be modified on a FILESTREAM or MEMORY_OPTIMIZED_DATA filegroup.
5018	10	No	The file "%.*ls" has been modified in the system catalog. The new path will be used the next time the database is started.
5019	10	No	Cannot find entry in sys.master_files for file '%.*ls'.
5020	16	No	The primary data or log file cannot be removed from a database.
5021	10	No	The %S_MSG name '%.*ls' has been set.
5022	16	No	Log file '%ls' for this database is already active.
5023	16	No	The database must be suspect or in emergency mode to rebuild the log.
5024	16	No	No entry found for the primary log file in sysfiles1. Could not rebuild the log.
5025	16	No	The file '%ls' already exists. It should be renamed or deleted so that a new log file can be created.
5027	16	No	System databases master, model, and tempdb cannot have their logs rebuilt.
5028	16	No	The system could not activate enough of the database to rebuild the log.
5029	10	Yes	Warning: The log for database '%.*ls' has been rebuilt. Transactional consistency has been lost. The RESTORE chain was broken, and the server no longer has context on the previous log files, so you will need to know what they were. You should run DBCC CHECKDB to validate physical consistency. The database has been put in dbo-only mode. When you are ready to make the database available for use, you will need to reset database options and delete any extra log files.
5030	16	No	The database %.*ls could not be exclusively locked to perform the operation.
5031	16	No	Cannot remove the file '%.*ls' because it is the only file in the DEFAULT filegroup.
5032	10	No	The file cannot be shrunk below page %d until the log is backed up because it contains bulk logged pages.
5033	16	No	The maximum of %ld files per database has been exceeded.
5034	16	No	The file %ls is currently being autogrown or modified by another process. Try the operation again later.
5035	16	No	Filegroup '%.*ls' already exists in this database. Specify a different name or remove the conflicting filegroup if it is empty.
5036	16	No	MODIFY FILE failed. Specify logical name.
5038	16	No	MODIFY FILE failed for file "%.*ls". At least one property per file must be specified.
5039	16	No	MODIFY FILE failed. Specified size is less than or equal to current size.
5040	16	No	MODIFY FILE failed for database '%.*ls', file id %d. Size of file (%I64d KB) is greater than MAXSIZE (%I64d KB).
5041	16	No	MODIFY FILE failed. File '%.*ls' does not exist.
5042	16	No	The %S_MSG '%.*ls' cannot be removed because it is not empty.
5043	16	No	The %S_MSG '%.*ls' cannot be found in %ls.
5044	10	No	The %S_MSG '%.*ls' has been removed.
5045	16	No	The %S_MSG already has the '%ls' property set.
5046	10	No	The %S_MSG property '%ls' has been set.
5047	16	No	Cannot change the READONLY property of the PRIMARY filegroup.
5048	16	No	Cannot add, remove, or modify files in filegroup '%.*ls'. The filegroup is read-only.
5050	16	No	Cannot change the properties of empty filegroup '%.*ls'. The filegroup must contain at least one file.
5051	16	No	Cannot have a filegroup with the name 'DEFAULT'.
5052	16	No	%ls is not permitted while a database is in the %ls state.
5054	16	No	Could not cleanup worktable IAM chains to allow shrink or remove file operation. Please try again when tempdb is idle.
5055	16	No	Cannot add, remove, or modify file '%.*ls'. The file is read-only.
5056	16	No	Cannot add, remove, or modify a file in filegroup '%.*ls' because the filegroup is not online.
5057	16	No	Cannot add, remove, or modify file '%.*ls' because it is offline.
5058	16	No	Option '%.*ls' cannot be set in database '%.*ls'.
5059	16	No	Database '%.*ls' is in transition. Try the ALTER DATABASE statement later.
5060	10	No	Nonqualified transactions are being rolled back. Estimated rollback completion: %d%%.
5061	16	No	ALTER DATABASE failed because a lock could not be placed on database '%.*ls'. Try again later.
5062	16	No	The option "%.*ls" conflicts with another requested option. The options cannot both be requested at the same time.
5063	16	No	Database '%.*ls' is in warm standby. A warm-standby database is read-only.
5064	16	No	Changes to the state or options of database '%.*ls' cannot be made at this time. The database is in single-user mode, and a user is currently connected to it.
5065	16	No	The file "%ls" is currently being scanned or used by a background or user process. Try the operation again later.
5066	16	No	Database options single user and dbo use only cannot be set at the same time.
5067	16	No	The database option TORN_PAGE_DETECTION is incompatible with the PAGE_CHECKSUM option.
5068	10	No	Failed to restart the current database. The current database is switched to master.
5069	16	No	ALTER DATABASE statement failed.
5070	16	No	Database state cannot be changed while other users are using the database '%.*ls'
5071	16	No	Rebuild log can only specify one file.
5072	16	No	ALTER DATABASE failed. The default collation of database '%.*ls' cannot be set to %.*ls.
5073	16	No	Cannot alter collation for database '%ls' because it is READONLY, OFFLINE, or marked SUSPECT.
5074	16	No	The %S_MSG '%.*ls' is dependent on %S_MSG '%.*ls'.
5075	16	No	The %S_MSG '%.*ls' is dependent on %S_MSG. The database collation cannot be changed if a schema-bound object depends on it. Remove the dependencies on the database collation and then retry the operation.
5076	10	No	Warning: Changing default collation for database '%.*ls', which is used in replication. All replication databases should have the same default collation.
5077	16	No	Cannot change the state of non-data files or files in the primary filegroup.
5078	16	No	Cannot alter database options for "%ls" because it is READONLY, OFFLINE, or marked SUSPECT.
5079	10	No	Database "%.*ls" is %S_MSG for vardecimal storage format.
5080	16	No	Vardecimal storage format cannot be disabled for database "%.*ls" because the database is not under simple recovery model. Change the database recovery model to simple and then reissue the command.
5081	16	No	The value for change tracking option '%ls' is not valid. The value must be a positive number.
5082	16	No	Cannot change the versioning state on database "%.*ls" together with another database state.
5083	16	No	The termination option is not supported when making versioning state changes.
5084	10	Yes	Setting database option %ls to %ls for database '%.*ls'.
5085	16	No	Alter database command failed because SQL Server was started with one or more undocumented trace flags that prevent enabling/disabling database for versioning.
5086	16	No	Cannot disable vardecimal storage format for database "%.*ls" because there are one or more tables that have vardecimal storage format enabled. Disable the vardecimal storage format on all tables before disabling the vardecimal storage format for the database.
5087	16	No	The file content type mismatches with the content type of the filegroup.
5088	16	No	Change tracking is already enabled for database '%.*ls'.
5089	16	No	Change tracking is disabled for database '%.*ls'. Change tracking must be enabled on a database to modify change tracking settings.
5090	16	No	Database '%.*ls' is a system database. Change tracking settings cannot be modified for system databases.
5091	15	No	ALTER DATABASE change tracking option '%ls' was specified more than once. Each option can be specified only once.
5092	15	No	The value for change tracking option '%ls' is not valid. The value must be between %d and %d minutes.
5093	16	No	The operation cannot be performed on a database snapshot.
5094	16	No	The operation cannot be performed on a database with database snapshots or active DBCC replicas.
5095	16	No	A database or filegroup cannot be set to read-only mode when any files are subject to a RESTORE PAGE operation. Complete the restore sequence involving file "%ls" before attempting to transition to read-only.
5096	16	No	The recovery model cannot be changed to SIMPLE when any files are subject to a RESTORE PAGE operation. Complete the restore sequence involving file "%ls" before attempting to transition to SIMPLE.
5097	16	No	The container cannot be set to the offline state because changes exist that require a log backup. Take a log backup and then retry the ALTER DATABASE statement.
5098	16	No	The container can not be dropped because changes exist that require a log backup. Take a log backup and then retry the ALTER DATABASE operation.
5099	16	No	ALTER DATABASE failed because the READ_COMMITTED_SNAPSHOT and the ALLOW_SNAPSHOT_ISOLATION options cannot be set to ON when a database has FILESTREAM filegroups. To set READ_COMMITTED_SNAPSHOT or ALLOW_SNAPSHOT_ISOLATION to ON, you must remove the FILESTREAM filegroups from the database.
5102	22	No	Attempted to open a filegroup for the invalid ID %d in database "%.*ls".
5103	16	No	MAXSIZE cannot be less than SIZE for file '%ls'.
5104	16	No	File '%.*ls' already used.
5105	16	Yes	A file activation error occurred. The physical file name '%.*ls' may be incorrect. Diagnose and correct additional errors, and retry the operation.
5108	10	No	Log file '%.*ls' does not match the primary file. It may be from a different database or the log may have been rebuilt previously.
5110	16	No	The file "%.*ls" is on a network path that is not supported for system database files.
5111	10	No	File activation failure. The physical file name "%.*ls" may be incorrect.
5112	10	Yes	FCB::SetSize dbid %d fileid %d oldSize %d newSize %d. To prevent this informational message from appearing in the error log, use DBCC TRACEOFF to turn off the trace flag.
5113	10	No	The log cannot be rebuilt because there were open transactions/users when the database was shutdown, no checkpoint occurred to the database, or the database was read-only. This error could occur if the transaction log file was manually deleted or lost due to a hardware or environment failure.
5114	16	No	Log files, offline files, restoring files, and defunct files for database snapshots should not be specified. "%.*ls" is not an eligible file for a database snapshot.
5115	16	No	Only SQL Server database files can be specified for database snapshots. '%.*ls' is not a SQL Server database file.
5118	16	No	The file "%ls" is compressed but does not reside in a read-only database or filegroup. The file must be decompressed.
5119	16	No	Cannot make the file "%.*ls" a sparse file. Make sure the file system supports sparse files.
5120	16	No	Unable to open the physical file "%.*ls". Operating system error %d: "%ls".
5121	16	No	The path specified by "%.*ls" is not in a valid directory.
5123	16	No	CREATE FILE encountered operating system error %ls while attempting to open or create the physical file '%.*ls'.
5124	16	Yes	The file header in '%ls' does not match the expected contents for file '%ls' of database '%ls'. The mismatch is possibly between the full-text catalog files and the related database. Perform a restore if necessary.
5125	24	No	File '%ls' appears to have been truncated by the operating system. Expected size is %I64d KB but actual size is %I64d KB.
5127	16	No	All files must be specified for database snapshot creation. Missing the file "%ls".
5128	17	No	Write to sparse file '%ls' failed due to lack of disk space.
5129	10	No	The log cannot be rebuilt when the primary file is read-only.
5130	10	No	The log cannot be rebuilt when database mirroring is enabled.
5131	10	No	The log was not rebuilt because there is more than one log file.
5132	16	No	The path specified by '%.*ls' cannot be used for FILESTREAM files because it is a raw device.
5133	16	No	Directory lookup for the file "%ls" failed with the operating system error %ls.
5134	16	No	The path that is specified by '%.*ls' cannot be used for FILESTREAM files because it is not on a supported file system.
5135	16	No	The path '%.*ls' cannot be used for FILESTREAM files. For information about supported paths, see SQL Server Books Online.
5136	16	No	The path specified by '%.*ls' cannot be used for a FILESTREAM container since it is contained in another FILESTREAM container.
5137	16	No	Snapshot database file and base database file are not allowed to be on the different type of storage.
5138	16	No	Trailing space is not allowed in SQL file name '%.*ls' on cloud storage.
5139	16	No	Operation (%.*ls) failed on '%.*ls'. Operating system error %d: "%ls"
5140	16	No	Failed to lock credential object (Account: %.*ls, Container: %.*ls). Lock Mode: %.*ls.
5141	16	No	Failed to lock credential manager. Lock Mode: %.*ls.
5142	16	No	Failed to lock lease renewal manager. Lock Mode: %.*ls.
5143	16	No	Concurrent operation (%.*ls) failed on file '%.*ls'. Operating system error %d: "%ls"
5144	10	Yes	Autogrow of file '%.*ls' in database '%.*ls' was cancelled by user or timed out after %d milliseconds. Use ALTER DATABASE to set a smaller FILEGROWTH value for this file or to explicitly set a new file size.
5145	10	Yes	Autogrow of file '%.*ls' in database '%.*ls' took %d milliseconds. Consider using ALTER DATABASE to set a smaller FILEGROWTH for this file.
5149	16	No	MODIFY FILE encountered operating system error %ls while attempting to expand the physical file '%ls'.
5150	16	No	The size of a single log file must not be greater than 2 TB.
5152	16	No	This operation is not supported for URL %.*ls.
5153	16	No	OVERFLOW is not supported in Alter Database modify statement in Sql DW back door.
5159	24	No	Operating system error %.*ls on file "%.*ls" during %ls.
5161	16	Yes	An unexpected file id was encountered. File id %d was expected but %d was read from "%.*ls". Verify that files are mapped correctly in sys.master_files. ALTER DATABASE can be used to correct the mappings.
5169	16	No	FILEGROWTH cannot be greater than MAXSIZE for file '%.*ls'.
5170	16	Yes	Cannot create file '%ls' because it already exists. Change the file path or the file name, and retry the operation.
5171	16	No	%.*ls is not a primary database file.
5172	16	No	The header for file '%ls' is not a valid database file header. The %ls property is incorrect.
5173	16	Yes	One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup.
5174	16	No	Each file size must be greater than or equal to 512 KB.
5175	10	Yes	The file %.*ls has been expanded to allow recovery to succeed. After recovery completes, you can increase the size of the files in the database. Contact the system administrator for assistance.
5176	10	Yes	To allow recovery to succeed, the log file '%.*ls' has been expanded beyond its maximum size. After recovery completes, you should either increase the size of the log file in the database or schedule more frequent backups of the log (under the full or bulk-logged recovery model).
5177	16	Yes	An unexpected error occurred while checking the sector size for file '%.*ls'. Move the file to a local NTFS volume, where the sector size can be retrieved. Check the SQL Server error log for more information.
5178	16	Yes	Cannot use file '%.*ls' because it was originally formatted with sector size %d and is now on a volume with sector size %d. Move the file to a volume with a sector size that is the same as or smaller than the original sector size.
5179	16	Yes	Cannot use file '%.*ls', because it is on a volume with sector size %d. SQL Server supports a maximum sector size of 4096 bytes. Move the file to a volume with a compatible sector size.
5180	22	Yes	Could not open File Control Block (FCB) for invalid file ID %d in database '%.*ls'. Verify the file location. Execute DBCC CHECKDB.
5181	16	No	Could not restart database "%.*ls". Reverting to the previous status.
5182	10	Yes	New log file '%.*ls' was created.
5183	16	No	Cannot create the file "%ls". Use WITH MOVE to specify a usable physical file name. Use WITH REPLACE to overwrite an existing file.
5184	16	No	Cannot use file '%.*ls' for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql Server does not have a dependency on it.
5185	16	No	Cannot find the matching log file for FILESTRAM file '%.*ls'.
5186	16	No	Encountered an error (NT status code 0x%x) while attempting to start the Transactional File System Resource Manager '%.*ls'.
5188	16	No	Encountered error (NT status code 0x%x) while attempting to perform redo for transactional file system resource manager '%.*ls'.
5189	16	No	Encountered error (NT status code 0x%x) while attempting to perform undo for transactional file system resource manager '%.*ls'.
5190	16	No	Encountered error (NT status code 0x%x) while attempting to checkpoint transactional file system resource manager '%.*ls'.
5191	10	No	Local directory '%.*ls' is used for tempdb in a clustered server. This directory must exist on each cluster node and SQL Server service has read/write permission on it.
5192	16	No	Maximum allowed file size is %I64dGB.
5193	21	No	Failed to access file due to lease mismatch. Bringing down database.
5194	16	No	The size for FILESTREAM log file '%.*ls' must be greater than or equal to 1 MB.
5195	16	No	The Cluster Service function call '%s' failed with error code '%s' while verifying the file path. Verify that your failover cluster is configured properly.
5196	10	No	The file "%ls" has been uncompressed.
5197	16	No	Encountered an error (%ls) while attempting to uncompress the file "%ls".
5198	16	No	The path specified by "%.*ls" is a UNC path. UNC path is not supported in failover clustered environment.
5199	16	No	The path specified by "%.*ls" is a raw device. Raw device path is not supported in failover clustered environment.
5201	10	No	DBCC SHRINKDATABASE: File ID %d of database ID %d was skipped because the file does not have enough free space to reclaim.
5202	10	No	DBCC SHRINKDATABASE for database ID %d is waiting for the snapshot transaction with timestamp %I64d and other snapshot transactions linked to timestamp %I64d or with timestamps older than %I64d to finish.
5203	10	No	DBCC SHRINKFILE for file ID %d is waiting for the snapshot transaction with timestamp %I64d and other snapshot transactions linked to timestamp %I64d or with timestamps older than %I64d to finish.
5204	16	No	Could not find allocation unit ID %I64d. Check sys.allocation_units.
5205	10	No	%.*ls: Moving page %d:%d failed.
5206	10	No	%.*ls: Page %d:%d could not be moved because it could not be read.
5207	10	No	%.*ls: Page %d:%d could not be moved because it is a work table page.
5208	10	No	%.*ls: Page %d:%d could not be moved because it is a work file page.
5209	10	No	%.*ls: Page %d:%d could not be moved because it is a dedicated allocation page.
5210	10	No	%.*ls: Page %d:%d could not be moved because it is an invalid page type.
5211	10	No	%.*ls: Page %d:%d could not be moved because it was deallocated during shrink.
5212	10	No	%.*ls: System table SYSFILES1 Page %d:%d could not be moved to other files because it only can reside in the primary file of the database.
5213	10	No	%.*ls: Page %d:%d could not be moved because its ownership was changed during shrink.
5214	10	No	%.*ls: Page %d:%d could not be moved because its page type was changed during shrink.
5215	10	No	%.*ls: Page %d:%d could not be moved because the partition to which it belonged was dropped or is part of a paused resumable index build. Use sys.index_resumable_operations to identify paused resumable index builds.
5216	10	No	%.*ls: Heap page %d:%d could not be moved because the table to which it belonged was dropped.
5217	10	No	%.*ls: Page %d:%d could not be moved because it is an empty non-leaf level index page.
5218	10	No	%.*ls: Heap page %d:%d could not be moved because the table name could not be found.
5219	10	No	%.*ls: Heap page %d:%d could not be moved.
5220	10	No	%.*ls: Index Allocation Map (IAM) page %d:%d could not be moved.
5221	10	No	%.*ls: Index Allocation Map (IAM) page %d:%d from a dropped allocation unit could not be moved.
5222	10	No	%.*ls: Page %d:%d from a dropped allocation unit could not be deallocated.
5223	10	No	%.*ls: Empty page %d:%d could not be deallocated.
5224	10	No	%.*ls: Empty large object page %d:%d could not be deallocated.
5225	10	No	%.*ls: Not all ghost records on the large object page %d:%d could be removed. If there are active queries on readable secondary replicas check the current ghost cleanup boundary.
5226	10	No	%.*ls: Page %d:%d (type UNLINKED_REORG_PAGE) could not be deallocated.
5227	10	No	%.*ls: Page %d:%d (type BULK_OPERATION_PAGE) could not be deallocated.
5228	16	No	Table error: object ID %d, index ID %d, partition ID %I64d, alloc unit ID %I64d (type %.*ls), page %S_PGID, row %d. DBCC detected incomplete cleanup from an online index build operation. (The anti-matter column value is %d.)
5229	16	No	Table error: Object ID %d, index ID %d, partition ID %I64d, alloc unit ID %I64d (type %.*ls) contains an anti-matter column, but is not a nonclustered index.
5230	10	No	The check statement was aborted. DBCC CHECKCATALOG cannot be run on TEMPDB.
5231	10	No	Object ID %ld (object '%.*ls'): A deadlock occurred while trying to lock this object for checking. This object has been skipped and will not be processed.
5232	10	No	DBCC CHECKDB will not check SQL Server catalog or Service Broker consistency because a database snapshot could not be created or because WITH TABLOCK was specified.
5233	16	No	Table error: alloc unit ID %I64d, page %S_PGID. The test (%.*ls) failed. The values are %ld and %ld.
5234	10	No	DBCC SHRINKDATABASE: File ID %d of database ID %d was skipped because trying to adjust the space allocation for the file was failed.
5235	10	No	%lsDBCC %ls (%ls%ls%ls)%ls executed by %ls terminated abnormally due to error state %d. Elapsed time: %d hours %d minutes %d seconds.
5236	10	No	Unable to process object '%ls' because it is a four-part name, which is not supported by any DBCC command.
5237	10	No	DBCC cross-rowset check failed for object '%.*ls' (object ID %d) due to an internal query error.
5238	16	No	Unable to process object ID %ld (object '%.*ls') because it is a stored procedure or user-defined function, which is not supported by any DBCC command.
5239	16	No	Unable to process object ID %ld (object '%.*ls') because this DBCC command does not support objects of this type.
5240	10	No	File ID %d of database ID %d cannot be shrunk as it is either being shrunk by another process or is empty.
5241	10	No	File ID %d of database ID %d cannot be shrunk as the target shrink size (%I64d KB) is greater than the actual file size (%I64d KB).
5242	16	No	An inconsistency was detected during an internal operation in database '%.*ls'(ID:%d) on page %S_PGID. Please contact technical support.
5243	16	No	An inconsistency was detected during an internal operation. Please contact technical support.
5244	16	No	Repair statement not processed. One or more files in the database are read-only and must be made writeable in order to run repair.
5245	16	No	Object ID %ld (object '%.*ls'): DBCC could not obtain a lock on this object because the lock request timeout period was exceeded. This object has been skipped and will not be processed.
5246	16	No	Repair operations cannot be performed on the MSSQLSYSTEMRESOURCE database. Consult Books Online topic "Resource Database" for more information.
5247	16	No	Repair: insert a secondary index row based on its base table row.
5248	10	No	Repair: Successfully %ls row in index "%ls" in database "%ls".
5249	10	No	%.*ls: Page %d:%d could not be moved because shrink could not lock the page.
5250	16	No	Database error: %ls page %S_PGID for database '%.*ls' (database ID %d) is invalid. This error cannot be repaired. You must restore from backup.
5251	10	No	%.*ls: Heap page %d:%d could not be moved because maintaining NC indexes associated with the heap failed.
5252	10	No	File ID %d of database ID %d cannot be shrunk to the expected size. The high concurrent workload is leading to too many deadlocks during the shrink operation. Re-run the shrink operation when the workload is lower.
5253	10	No	The check statement was aborted. DBCC CHECKALLOC cannot be run on TEMPDB.
5254	10	No	%.*ls: Heap page %d:%d could not be moved because the table to which it belonged was building the heap by another process.
5255	10	No	%.*ls: Page %d:%d could not be moved because it is a sort page.
5256	16	No	Table error: alloc unit ID %I64d, page %S_PGID contains an incorrect page ID in its page header. The PageId in the page header = %S_PGID.
5257	10	No	%.*ls: File ID %d of database ID %d was skipped because the file size was changed in the middle of shrink operation.
5258	10	No	%.*ls: Heap page %d:%d could not be moved because building computed column expression failed.
5259	10	No	%.*ls: Heap page %d:%d could not be moved because populating computed column expression failed.
5260	16	No	Object ID %d, index ID %d, partition ID %I64d, alloc unit ID %I64d (type %.*ls): At least one record on page %S_PGID contains versioning information, but the VERSION_INFO bit in the page header is not set.
5261	10	No	%.*ls: Page %d:%d could not be moved because it has not been formatted.
5262	16	No	Object ID %d, index ID %d, partition ID %I64d, alloc unit ID %I64d (type %.*ls), page %S_PGID, row %d: Row contains a NULL versioning timestamp, but its version chain pointer is not NULL. Version chain points to page %S_PGID, slot %d.
5263	10	No	Found incorrect count(s) for table '%.*ls', index '%.*ls', partition %ld:
5264	10	No	DATA pages %.*ls: From system table - %I64d pages; Actual - %I64d pages.
5265	10	No	USED pages %.*ls: From system table - %I64d pages; Actual - %I64d pages.
5266	10	No	RSVD pages %.*ls: From system table - %I64d pages; Actual - %I64d pages.
5267	10	No	ROWS count: From system table - %I64d rows; Actual - %I64d rows.
5268	10	No	DBCC %.*ls is performing an exhaustive search of %d indexes for possible inconsistencies. This is an informational message only. No user action is required.
5269	16	No	Check terminated. The transient database snapshot for database '%.*ls' (database ID %d) has been marked suspect due to an IO operation failure. Refer to the SQL Server error log for details.
5270	10	No	%.*ls: Page %d:%d could not be moved because it is an unmovable page in a critical system table.
5271	10	No	DBCC %ls could not output results for this command due to an internal failure. Review other errors for details.
5272	10	No	%.*ls: Index Allocation Map (IAM) page %d:%d could not be moved because the underlying object could not be accessed exclusively.
5273	10	No	%.*ls: Page %d:%d could not be moved because it belonged to an index/heap that was/is in build online.
5274	16	No	Table error: Object ID %d, index ID %d, partition ID %I64d, alloc unit ID %I64d (type %.*ls), page %S_PGID. %S_MSG is invalid for compressed page; the following internal test failed: %.*ls. Values are %ld and %ld.
5275	10	No	Exhaustive search of '%.*ls' (database ID %d) for inconsistencies completed. Processed %d of %d total searches. Elapsed time: %I64d milliseconds. This is an informational message only. No user action is required.
5276	10	No	Exhaustive search of '%.*ls' (database ID %d) for inconsistencies failed due to exception %d, state %d. This is an informational message only. No user action is required.
5277	10	No	Internal %lsdatabase snapshot has split point LSN = %08x:%08x:%04x and first LSN = %08x:%08x:%04x.
5278	10	No	DBCC encountered a page with an LSN greater than the current end of log LSN %S_LSN for its internal database snapshot. Could not read page %S_PGID, database '%.*ls' (database ID %d), LSN = %S_LSN, type = %ld, isInSparseFile = %d. Please re-run this DBCC command."
5279	16	No	Table error: object ID %d, index ID %d, partition ID %I64d, database fragment ID %d. The row on page (%d:%d), slot ID %d should be on fragment ID %d but was found in fragment ID %d.
5280	16	No	An unexpected protocol element was received during the execution of a consistency check command. Retry the operation.
5281	10	No	Estimated TEMPDB space (in KB) needed for %s on database %.*ls = %I64d.
5282	16	No	Table error: Object ID %d, index ID %d, partition ID %I64d, alloc unit ID %I64d (type %.*ls), page %S_PGID. The header of the page is invalid: the IS_IN_SYSXACT flag bit is set.
5283	10	No	The Cross Rowset check on nonclustered columnstore index object ID %d, index ID %d, partition number %d failed. Please rebuild the partition.
5284	16	No	The replicated index '%.*ls' (object ID %d) and one or more of its clones do not contain the same rows.
5285	16	No	Nonclustered columnstore index '%.*ls' on table '%.*ls' has a missing dictionary on column id %d and rowgroup id %d. Drop and recreate the nonclustered columnstore index.
5286	10	No	%.*ls: Page %d:%d could not be moved because it belongs to an active online index build with LOBs.
5287	10	No	DBCC THROWERROR bypass exception. This is an informational message only. No user action is required.
5288	16	No	Columnstore index has one or more data values that do not match data values in a dictionary. Please run DBCC CHECKDB for more info.
5289	16	No	Clustered columnstore index '%.*ls' column '%.*ls' rowgroup id %d on table '%.*ls' has one or more data values that do not match data values in a dictionary. Restore the data from a backup.
5290	16	No	Columnstore index has one or more data values that are inconsistent with data values within the metadata. Please run DBCC CHECKDB for more info.
5291	16	No	Clustered columnstore index '%.*ls' column '%.*ls' rowgroup id %d on table '%.*ls' has one or more data values that are inconsistent with data values within the metadata. Restore the data from a backup.
5292	16	No	Column store index '%.*ls' on table '%.*ls' has erroneous content in its Delete Bitmap with rowgroup_id %d and tuple_id %d.
5293	16	No	Nonclustered columnstore index '%.*ls' column '%.*ls' rowgroup id %d on table '%.*ls' has one or more data values that do not match data values in a dictionary. Drop and recreate the nonclustered columnstore index.
5294	16	No	Nonclustered columnstore index '%.*ls' column '%.*ls' rowgroup id %d on table '%.*ls' has one or more data values that are inconsistent with data values within the metadata. Drop and recreate the nonclustered columnstore index.
5295	16	No	DBCC UPDATEUSAGE cannot acquire lock on object 'sysallocunits'. Please try again later.
5296	10	No	Object ID %ld (object '%.*ls'): The operation is not supported with memory optimized tables. This object has been skipped and will not be processed.
5297	10	No	The Cross Rowset check between clustered columnstore index and nonclustered index (object ID %d, index ID %d, partition number %d) failed. Please rebuild the partition.
5298	16	No	Cannot display content of page %S_PGID. The rowset it belongs to is in tombstone state and pending removal.
5299	16	No	Query Store Error:%d State:%d Message:%.*ls
5301	16	No	Bulk load failed. User does not have ALTER TABLE permission on table '%.*ls'. ALTER TABLE permission is required on the target table of a bulk load if the target table contains triggers or check constraints, but the 'FIRE_TRIGGERS' or 'CHECK_CONSTRAINTS' bulk hints are not specified. ALTER TABLE permission is also required if the 'KEEPIDENTITY' bulk hint is specified.
5302	16	No	Mutator '%.*ls' on '%.*ls' cannot be called on a null value.
5303	16	No	The result of applying mutator '%.*ls' on CLR type '%.*ls' cannot be a null value.
5304	16	No	Bulk copy failed. User does not have ALTER TABLE permission on table '%.*ls'. ALTER TABLE permission is required on the target table of a bulk copy operation if the table has triggers or check constraints, but 'FIRE_TRIGGERS' or 'CHECK_CONSTRAINTS' bulk hints are not specified as options to the bulk copy command.
5305	16	No	The rowdump and lockres columns are only valid on tables and indexed views on which the NOEXPAND hint is specified.
5306	16	No	Cursor parameters are not allowed for functions. Variable '%.*ls' is of type cursor.
5307	16	No	Invalid parameter specified for sp_cursoropen.
5308	16	No	Windowed functions, aggregates and NEXT VALUE FOR functions do not support integer indices as ORDER BY clause expressions.
5309	16	No	Windowed functions, aggregates and NEXT VALUE FOR functions do not support constants as ORDER BY clause expressions.
5310	16	No	Aggregates are not allowed in the VALUES list of an INSERT statement.
5311	16	No	Invalid quote character '%lc'. A remote server or user command used an invalid quote character.
5312	16	No	The input to the function 'ntile' cannot be bound.
5313	16	No	Synonym '%.*ls' refers to an invalid object.
5314	16	No	The use of aggregates is not allowed in this context.
5315	16	No	The target of a MERGE statement cannot be a remote table, a remote view, or a view over remote tables.
5316	16	No	The target '%.*ls' of the MERGE statement has an INSTEAD OF trigger on some, but not all, of the actions specified in the MERGE statement. In a MERGE statement, if any action has an enabled INSTEAD OF trigger on the target, then all actions must have enabled INSTEAD OF triggers.
5317	16	No	The target of a MERGE statement cannot be a partitioned view.
5318	16	No	In a MERGE statement, the source and target cannot have the same name or alias. Use different aliases for the source and target to ensure that they have unique names in the MERGE statement.
5319	16	No	Aggregates are not allowed in a WHEN clause of a MERGE statement.
5321	16	No	The '%ls' function is not allowed in the %S_MSG clause when the FROM clause contains a nested INSERT, UPDATE, DELETE, or MERGE statement.
5322	16	No	An aggregate function is not allowed in the %S_MSG clause when the FROM clause contains a nested INSERT, UPDATE, DELETE, or MERGE statement.
5323	15	No	Subqueries are not allowed in the %S_MSG clause when the FROM clause contains a nested INSERT, UPDATE, DELETE, or MERGE statement.
5324	15	No	In a MERGE statement, a '%S_MSG' clause with a search condition cannot appear after a '%S_MSG' clause with no search condition.
5325	15	No	The order of the data in the data file does not conform to the ORDER hint specified for the BULK rowset '%.*ls'. The order of the data must match the order specified in the ORDER hint for a BULK rowset. Update the ORDER hint to reflect the order in which the input data is ordered, or update the input data file to match the order specified by the ORDER hint.
5326	15	No	The data in the data file does not conform to the UNIQUE hint specified for the BULK rowset '%.*ls'. The data in the data file must be unique if the UNIQUE hint is specified for a BULK rowset. Remove the UNIQUE hint, or update the input data file to ensure that the data is unique.
5327	15	No	The column '%.*ls' does not have a valid data type for the ORDER hint specified for data source '%.*ls'. The text, ntext, image, xml, varchar(max), nvarchar(max) and varbinary(max) data types cannot be used in the ORDER hint for a BULK rowset or CLR TVF.
5328	15	No	Cannot insert explicit value for the identity column '%.*ls' in the target table '%.*ls' of the INSERT statement when the FROM clause contains a nested INSERT, UPDATE, DELETE, or MERGE statement.
5329	15	No	Windowed functions are not allowed in the %S_MSG clause when the FROM clause contains a nested INSERT, UPDATE, DELETE, or MERGE statement.
5330	16	No	Full-text predicates cannot appear in the OUTPUT clause.
5331	16	No	Full-text predicates cannot appear in the %S_MSG clause when the FROM clause contains a nested INSERT, UPDATE, DELETE, or MERGE statement.
5332	15	No	The order of the data in the stream does not conform to the ORDER hint specified for the CLR TVF '%.*ls'. The order of the data must match the order specified in the ORDER hint for a CLR TVF. Update the ORDER hint to reflect the order in which the input data is ordered, or update the CLR TVF to match the order specified by the ORDER hint.
5333	16	No	The identifier '%.*ls' cannot be bound. Only source columns and columns in the clause scope are allowed in the 'WHEN NOT MATCHED' clause of a MERGE statement.
5334	16	No	The identifier '%.*ls' cannot be bound. Only target columns and columns in the clause scope are allowed in the 'WHEN NOT MATCHED BY SOURCE' clause of a MERGE statement.
5335	16	No	The data type %ls cannot be used as an operand to the UNION, INTERSECT or EXCEPT operators because it is not comparable.
5336	16	No	Recursive references are not allowed on the right hand side of an EXCEPT operator in the recursive part of recursive CTEs.
5337	16	No	A constant folding error caused the creation or alteration of the %S_MSG to fail. Common causes for this error are arithmetic overflow, type conversion failure, and divide-by-zero in an expression in the %S_MSG.
5338	16	No	Format option cannot be specified together with SINGLE_BLOB, SINGLE_CLOB or SINGLE_NCLOB option.
5339	16	No	CSV format option is supported for char and widechar datafiletype options.
5340	16	No	WITH schema clause cannot be specified together with FORMATFILE or SINGLE_BLOB/SINGLE_CLOB/SINGLE_NCLOB option.
5341	16	No	WITH schema clause cannot be provided without FORMAT = 'CSV' option.
5342	16	No	ROWTERMINATOR and FIELDTERMINATOR/DELIMITER cannot be provided without WITH schema.
5343	16	No	ROWTERMINATOR and FIELDTERMINATOR/DELIMITER can only be used with schema inference or WITH clause.
5344	16	No	Duplicate column ordinal cannot be provided in WITH schema clause.
5345	16	No	Both OFFSET and LENGTH parameters have to be provided together with inline schema (WITH clause).
5346	16	No	DATAFILETYPE can only be used with schema inference or WITH clause.
5347	16	No	USE_TYPE_DEFAULT option cannot be provided without WITH schema.
5348	16	No	An ERRORFILE_SECRET cannot be specified together with ERRORFILE_DATA_SOURCE option.
5349	16	No	An ERRORFILE_SECRET cannot be specified without ERRORFILE option.
5350	16	No	CSV format supports only TABLESAMPLE PERCENT option.
5351	16	No	Partial file cannot be provided together with TABLESAMPLE clause.
5352	16	No	Missing update assignment in update with action hint.
5353	16	No	Parser version '%ls' is not supported for provided format '%ls'.
5354	16	No	Parser version '%ls' is not supported.
5355	16	No	Empty string value cannot be provided as '%ls' option for specified format '%ls' and PARSER_VERSION '%ls'.
5356	16	No	Specifying database or server credential is not supported for OPENROWSET.
5357	16	No	Option '%ls' is not supported for specified format '%ls' and PARSER_VERSION '%ls'.
5358	16	No	An ERRORFILE_LOCATION cannot be specified without ERRORFILE_DATA_SOURCE option.
5359	16	No	An ERRORFILE_DATA_SOURCE cannot be specified without ERRORFILE_LOCATION option.
5360	16	No	With clause, format file and SINGLE_BLOB/SINGLE_CLOB/SINGLE_NCLOB options cannot be used with ReadMode=Metadata.
5361	16	No	Unsupported combination of datafiletype option and format.
5362	15	No	Window '%.*ls' is undefined.
5363	15	No	The function '%.*ls' may not have ORDER BY in OVER or WINDOW clause.
5364	15	No	Window frame with ROWS or RANGE must have an ORDER BY clause.
5365	15	No	Cyclic window references are not permitted.
5366	15	No	The function '%.*ls' must have an OVER clause or a WINDOW with ORDER BY.
5367	15	No	Window specification defined in one window can not be redefined in another window.
5368	16	No	Option '%ls' is not supported for specified format '%ls'.
5369	16	No	Option '%ls' is not supported for locations with '%ls' connector when specified FORMAT is '%ls'.
5370	16	No	Invalid column reference detected in view '%.*ls'. Please recreate the view or refresh the column definitions using sp_refreshview stored procedure.
5371	16	No	Connector prefix '%ls' is not supported for specified FORMAT '%ls'.
5372	16	No	The specified bulk option '%ls' is not supported for file format '%ls'. Review the documentation for supported options.
5373	16	No	All the input parameters should be of the same type. Supported types are tinyint, smallint, int, bigint, decimal and numeric.
5374	16	No	WITH clause is not supported for locations with '%ls' connector when specified FORMAT is '%ls'.
5501	16	No	The FILESTREAM filegroup was dropped before the table can be created.
5502	16	No	The FILESTREAM container is inaccessible.
5503	10	No	Unable to find entry in sys.database_files for FILESTREAM file '%.*ls'.
5504	15	No	'PRIMARY' can only be specified for FILESTREAM log filegroup in a 'CONTAINS' clause.
5505	16	No	A table that has FILESTREAM columns must have a nonnull unique column with the ROWGUIDCOL property.
5506	15	No	FILESTREAM data or log file cannot be named 'DEFAULT'.
5507	15	No	DEFAULT cannot be specified for FILESTREAM log filegroup '%.*ls'.
5508	15	No	FILESTREAM can only be declared for VARBINARY columns.
5509	15	No	The properties SIZE or FILEGROWTH cannot be specified for the FILESTREAM data file '%.*ls'.
5510	15	No	LOG ON cannot be used for non-FILESTREAM file group '%.*ls'.
5511	23	No	FILESTREAM's file system log record '%.*ls' under log folder '%.*ls' is corrupted.
5512	16	Yes	Error 0x%x (%ls) was encountered while directory '%.*ls' was being truncated.
5513	16	No	The name that is specified for the associated log filegroup for FILESTREAM filegroup '%.*ls' is not valid.
5514	16	No	Transactional replication/Change Data Capture cannot proceed because Transactional File System Resource Manager at '%.*ls' is not started.
5515	20	No	Cannot open the container directory '%.*ls' of the FILESTREAM file. The operating system has returned the status code 0x%x.
5516	16	No	The FILESTREAM log filegroup '%.*ls' cannot be referred to by more than one FILESTREAM data filegroup.
5517	16	No	FILESTREAM container MAXSIZE must be greater than or equal to 512 KB.
5518	16	No	FILESTREAM path '%.*ls' is too long.
5519	16	No	A database must have primary FILESTREAM log filegroup and log file in order for it to contain other FILESTREAM filegroups.
5520	16	No	Upgrade of FILESTREAM container ID %d in the database ID %d failed because of container size recalculation error. Examine the previous errorlog entries for errors, and take the appropriate corrective actions.
5521	16	No	Error 0x%x (NT status code) was encountered when SQL Server attempts to retrieve '%.*ls' from the Transaction File System Resource Manager located at '%.*ls'.
5522	16	No	FILESTREAM data file cannot be removed because its log file has not been backed up.
5523	16	No	FILESTREAM data file group cannot be added to refer to an empty FILESTREAM log file group.
5524	16	No	Default FILESTREAM data filegroup cannot be removed unless it's the last FILESTREAM data filegroup left.
5525	16	No	The READ_ONLY and READ_WRITE property cannot be modified on a FILESTREAM log filegroup.
5526	16	No	The FILESTREAM log file '%.*ls' cannot be removed because it is being referenced by a FILESTREAM data filegroup.
5527	16	No	The primary FILESTREAM log file cannot be dropped because other FILESTREAM filegroups exist.
5528	16	No	A database can have at most one primary FILESTREAM log filegroup and log file.
5529	16	No	Failed to remove a FILESTREAM file. The database is a primary database in an availability group. Wait for the FILESTREAM data files to be hardened on every secondary availability replica. Then retry the drop file operation.
5531	16	No	Error 0x%x (NT status code) was encountered when SQL Server attempts to change the logging mode of Transaction File System Resource Manager located at '%.*ls' from '%.*ls' to '%.*ls'.
5532	16	No	SQL Server cannot obtain the Kernel Transaction Manager's transaction context to perform file system operation.
5533	23	No	The FILESTREAM file system log record that has the LSN '%d:%d:%d' is missing. Log folder '%.*ls' is corrupted. Restore the database from a backup.
5534	23	No	SQL log record at LSN '%d:%d:%d' for database '%.*ls' is corrupted. Database cannot recover.
5535	23	No	FILESTREAM data container '%.*ls' is corrupted. Database cannot recover.
5536	23	No	FILESTREAM deleted folder '%.*ls' is corrupted. Database cannot recover.
5537	16	No	Function %ls is only valid on columns with the FILESTREAM attribute.
5538	16	No	Partial updates are not supported on columns that have a FILESTREAM as a source.
5539	16	No	The ROWGUIDCOL column associated with the FILESTREAM being used is not visible where method %ls is called.
5540	16	No	The FILESTREAM column cannot be used with method %ls because the associated ROWGUIDCOL of the base table is nullable or does not have a unique constraint.
5541	16	No	An open mode must be used when a FILESTREAM column is opened as a file.
5542	16	No	The FILESTREAM filegroup '%.*ls' has no files assigned to it. FILESTREAM data cannot be populated on this filegroup until a file is added.
5543	10	No	FILESTREAM: effective level = %d (remote access disabled), configured level = %d, file system access share name = '%.*ls'.
5544	10	No	FILESTREAM: effective level = %d (remote access enabled), configured level = %d, file system access share name = '%.*ls'.
5545	10	No	FILESTREAM: connected to kernel driver %ls. This is an informational message. No user action is required.
5546	10	No	FILESTREAM: failed to connect to kernel driver %ls.
5550	16	No	Too many Filestream containers were specified for Filestream Filegroup '%.*ls'. Specifying more than one Filestream Container per Filestream Filegroup is not supported in this edition of SQL Server. See Books Online for more details on feature support in different SQL Server editions.
5551	16	No	FILESTREAM file '%.*ls' cannot be added because its destination filegroup cannot have more than one file. Specifying more than one Filestream Container per Filestream Filegroup is not supported in this edition of SQL Server. See Books Online for more details on feature support in different SQL Server editions.
5552	16	No	FILESTREAM file named with GUID '%.*ls' that belongs to FILESTREAM data file ID 0x%x does not exist or cannot be opened.
5553	16	No	SQL Server internal error. FILESTREAM manager cannot continue with current command.
5554	16	No	The total number of versions for a single file has reached the maximum limit set by the file system.
5555	16	No	The operation has failed because the FILESTREAM data cannot be renamed.
5556	16	No	The database '%.*ls' does not exist or does not support FILESTREAM. Supply a valid database name. To see available databases, use sys.databases.
5557	16	No	The FILESTREAM container '%.*ls' does not exist or cannot be processed. Supply a valid FILESTREAM container name. To see available containers, use sys.databases_files.
5558	16	No	Database '%.*ls' should be in single-user mode.
5559	16	No	Could not open the database '%.*ls'.
5560	16	No	Access to the FILESTREAM tombstone table for the database '%.*ls' cannot be performed at the moment because it conflicts with another activity, such as background GC operation, backup operation, DBCC CHECK* operation or on-going snapshot creation.
5561	16	No	FILESTREAM garbage collector operation was aborted on the database '%.*ls'.
5570	16	No	FILESTREAM Failed to find the garbage collection table.
5571	23	No	Internal FILESTREAM error: failed to access the garbage collection table.
5572	23	No	Internal FILESTREAM error: failed to perform a filesystem operation because of a potential corruption.
5573	10	No	Internal FILESTREAM error: failed to access the tombstones table with HRESULT: 0x%x.
5574	16	No	A database cannot be enabled for both Database Mirroring and FILESTREAM or for both Database Mirroring and MEMORY_OPTIMIZED_DATA storage.
5575	10	No	Operation '%ls' failed with HRESULT: %ls in file '%hs', line %d while executing sp_filestream_configure.
5576	10	No	FILESTREAM feature is enabled. This is an informational message. No user action is required.
5577	10	No	FILESTREAM access level has been changed to %d. Restart the instance of SQL Server for the settings to fully take effect.
5578	16	No	A failure occurred while FILESTREAM configuration was being changed or applied. For more information, see the SQL Server error log.
5579	10	No	FILESTREAM: effective level = %d, configured level = %d.
5580	16	No	FILESTREAM InstanceGuid is null. Registry settings might be corrupted.
5581	10	No	FILESTREAM feature has been disabled. Restart the instance of SQL Server for the settings to fully take effect. If you have data in FILESTREAM columns, it will not be accessible after the SQL Server instance has been restarted.
5582	10	No	Machine reboot is required before the FILESTREAM feature settings can take effect.
5583	16	No	The specified value for the enable_level parameter of the sp_filestream_configure stored procedure is not valid. The value must be 0, 1, 2, or 3.
5584	16	No	Another session is executing the sp_filestream_configure stored procedure. Check the updated configuration settings and retry the operation if necessary.
5585	10	No	FILESTREAM file I/O access could not be enabled. The operating system Administrator must enable FILESTREAM file I/O access on the instance using Configuration Manager.
5586	10	No	The FILESTREAM feature is already configured to the specified level. No change has been made.
5588	16	No	Access to FILESTREAM data is not supported under snapshot isolation level.
5589	16	No	Access to FILESTREAM data is not supported under row versioning-based read committed snapshot isolation (RCSI).
5590	16	No	FILESTREAM operations are not supported on the platform.
5591	16	No	FILESTREAM feature is disabled.
5592	16	No	FILESTREAM feature doesn't have file system access enabled.
5593	16	No	FILESTREAM feature is not supported on WoW64. The feature is disabled.
5594	16	No	The value specified for the computer_name_format parameter of the .%ls() function is not valid.
5595	16	No	.PhysicalPathName is disabled.
5596	10	No	FILESTREAM feature configuration might be inconsistent. To reset the configuration, use the sp_configure stored procedure.
5597	16	No	FILESTREAM feature could not be initialized. The operating system Administrator must enable FILESTREAM on the instance using Configuration Manager.
5598	10	No	FILESTREAM feature is not supported on user instances.
5599	16	No	.ContainerId is disabled.
5600	16	No	The Cross Database Chaining option cannot be set to the specified value on the specified database.
5601	16	No	The service master key could not be force regenerated as requested by the -F startup option. The error number is %ld.
5602	10	No	The service master key regeneration was successful.
5603	16	No	The password for SA could not be force regenerated as requested by the -K startup option. The error number is %ld.
5604	10	No	The password regeneration attempt for SA was successful.
5605	16	No	The password for SA account could not be force regenerated and/or SA account cannot be disabled as requested by the -K startup option and the -T1617 trace flag.
5701	10	No	Changed database context to '%.*ls'.
5702	10	No	SQL Server is terminating this process.
5703	10	No	Changed language setting to %.*ls.
5803	10	No	Unknown configuration (id = %d) encountered in sys.configurations.
5804	16	Yes	Character set, sort order, or collation cannot be changed at the server level because at least one database is not writable. Make the database writable, and retry the operation.
5805	16	No	Too few locks specified. Minimum %d.
5807	16	No	Recovery intervals above %d minutes not recommended. Use the RECONFIGURE WITH OVERRIDE statement to force this configuration.
5808	16	No	Ad hoc update to system catalogs is not supported.
5810	16	No	Valid values for the fill factor are 0 to 100.
5812	14	No	You do not have permission to run the RECONFIGURE statement.
5828	16	No	User connections are limited to %d.
5829	16	No	The specified user options value is invalid.
5831	16	No	Minimum server memory value (%d) must be less than or equal to the maximum value (%d).
5832	16	No	The affinity mask specified does not match the CPU mask on this system.
5833	16	No	The affinity mask specified is greater than the number of CPUs supported or licensed on this edition of SQL Server.
5834	16	No	The affinity specified conflicts with the IO affinity mask specified. Change the affinity setting to use different CPUs than those specified in the IO affinity mask.
5835	16	No	Failed to start CPUs with the mask 0x%lx on the system.
5836	16	No	Lightweight pooling is not supported on this platform or in this edition of SQL Server.
5837	16	No	The service broker listen port cannot be dynamic. Valid port values are 1024-32767.
5838	16	No	The service broker connection authentication value is invalid.
5839	16	No	The service broker message forward store size cannot be set to 0.
5840	16	No	The service broker message forward mode is invalid.
5841	16	No	The default full-text language is not supported by the full-text search component.
5842	16	No	Too few worker threads are specified. The minimum is %d.
5844	16	No	User Instances are not supported in this edition of SQL Server.
5846	16	No	Common language runtime (CLR) execution is not supported under lightweight pooling. Disable one of two options: "clr enabled" or "lightweight pooling".
5848	10	Yes	Physical CPU id %u has been hot added to node id %u as logical CPU id %u. This is an informational message only. No user action is required.
5849	10	Yes	Online CPU addition is not supported in the current edition of SQL Server.
5850	10	Yes	Online addition of CPU resources cannot be completed. A software non-uniform memory access (soft-NUMA) configuration was specified at SQL Server startup that does not allow online addition of CPU resources. To use the additional CPU resources, either add the new CPUs to the soft-NUMA configuration and restart SQL Server, or remove the soft-NUMA configuration and restart SQL Server.
5851	10	No	The AccessCheckResult quota must be greater than or equal to the bucket count
5852	10	No	The AccessCheckResult bucket count must be less than %d.
5853	16	No	The affinity range is invalid. The lower bound %d must be less than the upper bound %d.
5854	16	No	A %S_MSG value was specified more than one time in the range list for an ALTER SERVER CONFIGURATION SET PROCESS AFFINITY statement.
5855	16	No	The affinity setting was not changed. This can be caused by low system resources.
5856	16	No	The %S_MSG range that specifies %S_MSG %d includes at least one %S_MSG that is not available to the current instance. The maximum %S_MSG number that is available to this instance is %d.
5857	10	No	CPU
5858	10	No	NUMANODE
5859	16	No	The current affinity setting specifies the use of more than 64 processors. Before you use sp_configure to change affinity settings, remove these processors by using ALTER SERVER CONFIGURATION.
5860	10	No	Affinity changed for node %d: from 0x%0*I64x:%u to 0x%0*I64x:%u. This is an informational message only. No user action is required.
5861	16	No	A %S_MSG with id %d does not exist on this system. Use sys.dm_os_schedulers to locate valid %S_MSGs for this system.
5862	16	No	The number of max worker threads is set too low. On this computer, the number must be more than %u. You should increase the number of max worker threads.
5863	16	No	Could not change the value of the '%.*ls' property. Operating system error %ls
5864	16	No	IO affinity is not supported on this edition of sql server.
5865	10	No	Dynamic configuration setting %ls%ls has been changed to %ld.
5866	10	No	Max server memory specified - %I64d MB is greater than the buffer pool extension size - %I64d MB. Buffer pool extension would be disabled on restart.
5867	16	No	Changing AFFINITY is not supported when the sql server is running in agnostic affinity mode.
5868	16	No	File system DMVs and DMFs have been disabled.
5869	16	No	Changes to server configuration option %s are not supported in SQL Database Managed Instances.
5870	16	No	Changes to server configuration option '%s' are not supported in this edition of SQL Server.
5871	16	No	Cannot set the column encryption enclave type to Virtualization-based security (VBS) - the operating system does not support VBS.
5872	16	No	Invalid column encryption enclave type %d specified.
5873	16	No	Cannot set the column encryption enclave type to Software Guard Extension (SGX)- the operating system does not support SGX.
5874	16	No	Changes to server configuration options are not permitted in the connection to Contained Availability Group. Change connection to SQL Server instance level and retry the operation.
5901	16	No	One or more recovery units belonging to database '%.*ls' failed to generate a checkpoint. This is typically caused by lack of system resources such as disk or memory, or in some cases due to database corruption. Examine previous entries in the error log for more detailed information on this failure.
5904	17	Yes	Unable to issue checkpoint: there are not enough locks available. Background checkpoint process will remain suspended until locks are available. To free up locks, list transactions and their locks, and terminate transactions with the highest number of locks.

Related content

• Database Engine events and errors
• Understanding Database Engine Errors
• Cause and Resolution of Database Engine Errors