NDIS calls the FilterSendNetBufferLists function to allow a filter driver to filter a linked list of NET_BUFFER_LIST structures.

Note  You must declare the function by using the FILTER_SEND_NET_BUFFER_LISTS type. For more information, see the following Examples section.



void FilterSendNetBufferLists(
  NDIS_HANDLE FilterModuleContext,
  ULONG SendFlags



A handle to the context area for the filter module. The filter driver created and initialized this context area in the FilterAttach function.


A pointer to a linked list of NET_BUFFER_LIST structures that specify lists of NET_BUFFER structures. Each NET_BUFFER in the list maps a chain of MDLs that contain the transmit data.


A port number that identifies a miniport adapter port. Miniport adapter port numbers are assigned by calling the NdisMAllocatePort function. A zero value identifies the default port of a miniport adapter.


Flags that define attributes for the send operation. The flags can be combined with an OR operation. To clear all the flags, set this member to zero. This function supports the following flags:


Specifies that the current IRQL is DISPATCH_LEVEL. For more information about this flag, see Dispatch IRQL Tracking.


Specifies that NDIS should check for loopback. By default, NDIS does not loop back data to the driver that submitted the send request. An overlying driver can override this behavior by setting this flag. When this flag is set, NDIS identifies all the NET_BUFFER structures that contain data that matches the receive criteria for the binding. NDIS indicates NET_BUFFER structures that match the criteria to the overlying driver. This flag has no affect on checking for loopback, or looping back, on other bindings.


If this flag is set, all packets in a linked list of NET_BUFFER_LIST structures originated from the same Hyper-V extensible switch source port.

For more information, see Hyper-V Extensible Switch Send and Receive Flags.

Note  If each packet in the linked list of NET_BUFFER_LIST structures uses the same source port, the extension should set the NDIS_SEND_COMPLETE_FLAGS_SWITCH_SINGLE_SOURCE flag in the SendCompleteFlags parameter of NdisFSendNetBufferListsComplete when it completes the send request.
Note  This flag is available in NDIS 6.30 and later.


If this flag is set, all packets in a linked list of NET_BUFFER_LIST structures are to be forwarded to the same extensible switch destination port.

For more information, see Hyper-V Extensible Switch Send and Receive Flags.

Note  This flag is available in NDIS 6.30 and later.

Return Value



FilterSendNetBufferLists is an optional function. If a filter driver does not filter send requests, it can set the entry point for this function to NULL when it calls the NdisFRegisterFilterDriver function.

If a filter driver specifies a FilterSendNetBufferLists function and it queues send requests, it must also specify a FilterCancelSendNetBufferLists function.

The filter driver can call the NdisSetOptionalHandlers function, from the FilterSetModuleOptions function, to specify a FilterSendNetBufferLists function for a filter module.

If the filter driver specifies a FilterSendNetBufferLists function, NDIS calls this function to filter the data that is contained in a list of NET_BUFFER structures over the network. NDIS specifies a list of NET_BUFFER structures in each NET_BUFFER_LIST structure.

If the filter driver did not specify FilterSendNetBufferLists, NDIS calls the next filter driver that is lower in the driver stack that did specify a FilterSendNetBufferLists function. If there are no such underlying filter drivers, NDIS calls an underlying driver's MiniportSendNetBufferLists function.

The filter driver can filter the data and send the filtered data to underlying drivers. For each NET_BUFFER structure submitted to FilterSendNetBufferLists, a filter driver can do the following:

  • Pass the buffer on to the next underlying driver by calling the NdisFSendNetBufferLists function. The filter driver can modify the buffer contents before calling NdisFSendNetBufferLists. In this case NDIS calls the FilterSendNetBufferListsComplete function after the underlying drivers complete the send request.
  • Reject the buffer by calling the NdisFSendNetBufferListsComplete function.
  • Queue the buffer in a local data structure for later processing.
  • Copy the buffer and originate a send request with the copy. The send operation is similar to a filter-driver initiated send request. In this case, the driver must return the original buffer to the overlying driver by calling the NdisFSendNetBufferListsComplete function.
After the send operation is complete, a filter driver reverses the modifications, if any, to the buffer descriptors that it made in the FilterSendNetBufferLists function. The driver calls the NdisFSendNetBufferListsComplete function to return the linked list of NET_BUFFER_LIST structures to the overlying drivers and to return the final status of the send request.

If a filter module is in the Paused state, the filter driver must not originate any send requests for that filter module. If NDIS calls FilterSendNetBufferLists, the driver must not call NdisFSendNetBufferLists to pass on the data until the driver is restarted. The driver should call NdisFSendNetBufferListsComplete immediately to complete the send operation. It should set the complete status in each NET_BUFFER_LIST structure to NDIS_STATUS_PAUSED.

NDIS calls FilterSendNetBufferLists at IRQL <= DISPATCH_LEVEL.


To define a FilterSendNetBufferLists function, you must first provide a function declaration that identifies the type of function you're defining. Windows provides a set of function types for drivers. Declaring a function using the function types helps Code Analysis for Drivers, Static Driver Verifier (SDV), and other verification tools find errors, and it's a requirement for writing drivers for the Windows operating system.

For example, to define a FilterSendNetBufferLists function that is named "MySendNetBufferLists", use the FILTER_SEND_NET_BUFFER_LISTS type as shown in this code example:

Then, implement your function as follows:
    NDIS_HANDLE  FilterModuleContext,
    PNET_BUFFER_LIST  NetBufferLists,
    NDIS_PORT_NUMBER  PortNumber,
    ULONG  SendFlags
The FILTER_SEND_NET_BUFFER_LISTS function type is defined in the Ndis.h header file. To more accurately identify errors when you run the code analysis tools, be sure to add the _Use_decl_annotations_ annotation to your function definition. The _Use_decl_annotations_ annotation ensures that the annotations that are applied to the FILTER_SEND_NET_BUFFER_LISTS function type in the header file are used. For more information about the requirements for function declarations, see Declaring Functions by Using Function Role Types for NDIS Drivers.

For information about Use_decl_annotations, see Annotating Function Behavior.


Minimum supported client Supported in NDIS 6.0 and later.
Target Platform Windows
Header ndis.h (include Ndis.h)

See Also


FilterCancelSendNetBufferLists FilterSendNetBufferListsComplete