IPSEC_OFFLOAD_V2_ADD_SA structure

[The IPsec Task Offload feature is deprecated and should not be used.]

The IPSEC_OFFLOAD_V2_ADD_SA structure defines information about a security association (SA) that a miniport driver should add to a NIC.

Syntax

typedef struct _IPSEC_OFFLOAD_V2_ADD_SA {
  NDIS_OBJECT_HEADER                    Header;
  PIPSEC_OFFLOAD_V2_ADD_SA              Next;
  ULONG                                 NumExtHdrs;
  ULONG                                 Flags;
  union {
    struct {
      IPAddr SrcAddr;
      IPAddr DestAddr;
    } IPv4Endpoints;
    struct {
      UCHAR SrcAddr[16];
      UCHAR DestAddr[16];
    } IPv6Endpoints;
  };
  NDIS_HANDLE                           OffloadHandle;
  ULONG                                 UdpEspEncapsulation;
  IPSEC_OFFLOAD_V2_SECURITY_ASSOCIATION SecAssoc[IPSEC_OFFLOAD_V2_MAX_EXTENSION_HEADERS];
  ULONG                                 KeyLength;
  UCHAR                                 KeyData[1];
} IPSEC_OFFLOAD_V2_ADD_SA, *PIPSEC_OFFLOAD_V2_ADD_SA;

Members

Header

The NDIS_OBJECT_HEADER structure for the IPSEC_OFFLOAD_V2_ADD_SA structure. Set the Type member of the structure that Header specifies to NDIS_OBJECT_TYPE_DEFAULT, the Revision member to NDIS_IPSEC_OFFLOAD_V2_ADD_SA_REVISION_1, and the Size member to NDIS_SIZEOF_IPSEC_OFFLOAD_V2_ADD_SA_REVISION_1.

Next

A pointer to an IPSEC_OFFLOAD_V2_ADD_SA structure that is the next structure in a linked list. If the pointer is NULL, the current structure is the last structure in the list.

NumExtHdrs

The number of IPsec extension headers. This member can be one of the following values.

Type of security Extension headers
AH authentication only 1
ESP authentication only 1
ESP encryption only 1
ESP authentication plus encryption 1
AH plus ESP authentication plus encryption 2
UDP ESP 1

Flags

A bitmask that indicates whether the SA that is being added is an inbound or outbound SA as follows:

IPSEC_OFFLOAD_V2_IPv6

If this flag is set, the addresses are IPv6. Otherwise, the addresses are IPv4

IPSEC_OFFLOAD_V2_INBOUND

If this flag is set, the SA is inbound. Otherwise, the SA is outbound.

IPv4Endpoints

IPv4Endpoints.SrcAddr

The IPv4 address of the source host (the host that is sending the packets).

IPv4Endpoints.DestAddr

The IPv4 address of the destination host (the host that is receiving the packets).

IPv6Endpoints

IPv6Endpoints.SrcAddr

The IPv6 address of the source host (the host that is sending the packets).

IPv6Endpoints.DestAddr

The IPv6 address of the destination host (the host that is receiving the packets).

OffloadHandle

The handle to the newly created SA. The miniport driver supplies this handle before completing the
OID_TCP_TASK_IPSEC_OFFLOAD_V2_ADD_SA request. The TCP/IP transport must specify this handle in the
NDIS_IPSEC_OFFLOAD_V2_NET_BUFFER_LIST_INFO or NDIS_IPSEC_OFFLOAD_V2_TUNNEL_NET_BUFFER_LIST_INFO structure before passing a send packet to the miniport driver. The TCP/IP transport must also specify this handle when deleting the SA with an OID_TCP_TASK_IPSEC_OFFLOAD_V2_DELETE_SA request.

UdpEspEncapsulation

The UDP ESP encapsulation type. This member can be one or more of the following flags:

IPSEC_OFFLOAD_V2_UDP_ESP_ENCAPSULATION_NONE

No UDP encapsulation is used.

IPSEC_OFFLOAD_V2_UDP_ESP_ENCAPSULATION_TRANSPORT

An ESP-encapsulated transport-mode packet is encapsulated by UDP.

IPSEC_OFFLOAD_V2_UDP_ESP_ENCAPSULATION_TUNNEL

The tunnel-mode portion of a packet is UDP-encapsulated. The transport-mode portion of the packet is not UDP-encapsulated and is not ESP-protected.

IPSEC_OFFLOAD_V2_TRANSPORT_OVER_UDP_ESP_ENCAPSULATION_TUNNEL

The tunnel-mode portion of a packet is UDP-encapsulated. The transport-mode portion of a packet is not UDP-encapsulated but is ESP-protected.

IPSEC_OFFLOAD_V2_UDP_ESP_ENCAPSULATION_TRANSPORT_OVER_TUNNEL

The tunnel-mode portion of a packet is not UDP-encapsulated. The transport-mode portion of a packet is UDP-encapsulated and ESP-protected.

SecAssoc

An array with two elements that contain the information about the IPsec operations (AH, ESP, or both) for the SA. The number of provided elements is specified in the NumExtHdrs member. The information for each IPsec operations is formatted as an IPSEC_OFFLOAD_V2_SECURITY_ASSOCIATION structure, which is described below.

The TCP/IP transport specifies one or two IPSEC_OFFLOAD_V2_SECURITY_ASSOCIATION structures in the buffer at SecAssoc . Each IPSEC_OFFLOAD_V2_SECURITY_ASSOCIATION structure indicates the type of operation--authentication or encryption/decryption--for which the SA specified in the structure is to be used. The order of the IPSEC_OFFLOAD_V2_SECURITY_ASSOCIATION structures in the array indicates the order in which the miniport driver should perform the operations for each SA. Only one combination of operations is supported: encryption/decryption (ESP) followed by authentication (AH).

KeyLength

The length, in bytes, of the buffer at KeyData .

KeyData

A variable-length array that contains keys for the SAs that are specified at SecAssoc . If both an encryption algorithm and an authentication algorithm are specified by the EncryptionAlgorithm and AuthenticationAlgorithm members of an IPSEC_OFFLOAD_V2_SECURITY_ASSOCIATION structure, the buffer at KeyData contains key information for one followed by the other. The beginning and the length of the key are specified by the KeyOffsetBytes and KeyLength members, respectively.

Remarks

This structure is obsolete, use IPSEC_OFFLOAD_V2_ADD_SA_EX instead.

The IPSEC_OFFLOAD_V2_ADD_SA structure specifies a security SA that should be added and a pointer to the next IPSEC_OFFLOAD_V2_ADD_SA structure in a linked list. The IPSEC_OFFLOAD_V2_ADD_SA structure is used with the OID_TCP_TASK_IPSEC_OFFLOAD_V2_ADD_SA OID.

The IPSEC_OFFLOAD_V2_ADD_SA structure specifies the source and destination, as well as the IP protocols, to which the SAs apply. This filter pertains to a transport-mode connection--that is, an end-to-end connection between two hosts. If the specified connection is made through a tunnel, the source and destination addresses of the tunnel are specified.

If a member is set to zero, that parameter is not used to filter packets for the specified SAs. For example, if SrcAddr is set to zero, the specified SAs can apply to a packet that contains any source address. If all of the filter parameters are set to zero, the specified SAs apply to any source host that is sending any type of packet to any destination host.

Requirements

   
Minimum supported client Supported in NDIS 6.1 and 6.20. For NDIS 6.30 and later, use IPSEC_OFFLOAD_V2_ADD_SA_EX.
Header ndis.h (include Ndis.h)

See Also

IPSEC_OFFLOAD_V2_ADD_SA_EX

IPSEC_OFFLOAD_V2_ALGORITHM_INFO IPSEC_OFFLOAD_V2_SECURITY_ASSOCIATION NDIS_IPSEC_OFFLOAD_V2_NET_BUFFER_LIST_INFO NDIS_IPSEC_OFFLOAD_V2_TUNNEL_NET_BUFFER_LIST_INFO

NDIS_OBJECT_HEADER

OID_TCP_TASK_IPSEC_OFFLOAD_V2_ADD_SA OID_TCP_TASK_IPSEC_OFFLOAD_V2_DELETE_SA