WHEA_GENERIC_ERROR_DESCRIPTOR_V2 structure (ntddk.h)

The WHEA_GENERIC_ERROR_DESCRIPTOR_V2 structure describes a generic error source.

Syntax

typedef struct _WHEA_GENERIC_ERROR_DESCRIPTOR_V2 {
  USHORT                       Type;
  UCHAR                        Reserved;
  UCHAR                        Enabled;
  ULONG                        ErrStatusBlockLength;
  ULONG                        RelatedErrorSourceId;
  UCHAR                        ErrStatusAddressSpaceID;
  UCHAR                        ErrStatusAddressBitWidth;
  UCHAR                        ErrStatusAddressBitOffset;
  UCHAR                        ErrStatusAddressAccessSize;
  WHEA_PHYSICAL_ADDRESS        ErrStatusAddress;
  WHEA_NOTIFICATION_DESCRIPTOR Notify;
  UCHAR                        ReadAckAddressSpaceID;
  UCHAR                        ReadAckAddressBitWidth;
  UCHAR                        ReadAckAddressBitOffset;
  UCHAR                        ReadAckAddressAccessSize;
  WHEA_PHYSICAL_ADDRESS        ReadAckAddress;
  ULONGLONG                    ReadAckPreserveMask;
  ULONGLONG                    ReadAckWriteMask;
} WHEA_GENERIC_ERROR_DESCRIPTOR_V2, *PWHEA_GENERIC_ERROR_DESCRIPTOR_V2;

Members

Type

The type of error source descriptor. This member is always set to WHEA_ERROR_SOURCE_DESCRIPTOR_TYPE_GENERIC_V2.

Reserved

Reserved for system use.

Enabled

A Boolean value that indicates if the error source is enabled.

ErrStatusBlockLength

The size, in bytes, of the block of error status registers that contain the error data for the error source.

RelatedErrorSourceId

The identifier of the related error source. If the generic error source does not relate back to another error source, this member is not used.

ErrStatusAddressSpaceID

The address space of the address that is specified in the ErrStatusAddress member.

ErrStatusAddressBitWidth

The size, in bits, of the register at the address that is specified in the ErrStatusAddress member.

ErrStatusAddressBitOffset

The offset, in bits, of the register at the address that is specified in the ErrStatusAddress member.

ErrStatusAddressAccessSize

The access size for reading the register at the address that is specified in the ErrStatusAddress member.

ErrStatusAddress

The 64-bit address of a register that contains the physical address of a block of memory that contains the error status data for the error source. This block of memory must reside in firmware reserved memory so that it is not reclaimed by the operating system's memory manager. The error status data contained in this block of memory is described by a WHEA_GENERIC_ERROR structure.

Notify

A WHEA_NOTIFICATION_DESCRIPTOR structure that describes the notification mechanism that is used by the error source.

ReadAckAddressSpaceID

The address space of the address that is specified in the ReadAckAddress member.

ReadAckAddressBitWidth

The size, in bits, of the register at the address that is specified in the ReadAckAddress member.

ReadAckAddressBitOffset

The offset, in bits, of the register at the address that is specified in the ReadAckAddress member.

ReadAckAddressAccessSize

The access size for reading the register at the address that is specified in the ReadAckAddress member.

ReadAckAddress

The 64-bit address of a register that is used to notify the RAS controller that Windows has processed the Error Status Block.

ReadAckPreserveMask

Contains a mask of bits to preserve when writing the Read Ack register.

ReadAckWriteMask

Contains a mask of bits to set when writing the Read Ack register.

Remarks

This structure corresponds to the Generic Hardware Error Source version 2 (GHESv2) structure that is defined in Advanced Configuration and Power Interface (ACPI) Specification version 6.2.

Requirements

   
Minimum supported client Windows 10, version 1803
Header ntddk.h

See also

WHEA_ERROR_SOURCE_DESCRIPTOR

WHEA_GENERIC_ERROR_DESCRIPTOR