Share via

Audio Codec - Audio Logo Test - Certification

  • Article

This automated test verifies that WaveRT drivers support pull-mode audio-streaming technology by implementing the IMiniportWaveRTStreamNotification interface.

Parameter:

[WDKDeviceID] - set this parameter to device ID when scheduling from Job Explorer for private testing

Please refer to WDK documentation for details about this test!

The following table shows the details for this test.

Test details

   
Specifications
  • Device.Audio.Base.ZeroGlitch
  • Device.Audio.Base.ReportSupportedProperties
  • Device.Audio.Base.WaveRTConformance
  • Device.Audio.Base.AudioProcessing
  • Device.Audio.Base.HardwareArchitecture
Platforms
  • Windows 10, mobile edition (Arm)
  • Windows 10, mobile edition (Arm64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 2
Category Compatibility
Timeout (in minutes) 120
Requires reboot false
Requires special configuration true
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: Audio Device Testing Prerequisites.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting Audio Testing.

All test cases return PASS or FAIL. To review test details, review the test log from Windows Hardware Lab Kit (Windows HLK) Studio.

The test should return PASS if the following occur:

  1. Render to all audio endpoints simultaneously is successful.

  2. A nearby associated hardware mute control exists on compressed endpoints

  3. All audio render endpoints successfully render streams in exclusive pull mode.

  4. All audio capture endpoints successfully capture streams in exclusive pull mode.

More information

Command syntax

Command option Description

AudioLogo

Without any options, the test enumerates audio devices.

-c [string]

This option starts the application and runs the test cases that are specified in the .profile file.

-h [string]

This option specifies the Plug and Play (PnP) ID of the device to be tested.

logo_win7_audiologo.pro

This is the .profile file of test cases to be run.

Note

   For command-line help for this test binary, type /h

 

File list

File Location

AudioLogo.exe

<testbinroot>\nttest\multimediatest\AVCore\Audio\WDK\

Logo_win7_audiologo.pro

<testbinroot>\nttest\multimediatest\AVCore\Audio\Profiles\

S98wtt_u.dll

<testbinroot>\nttest\multimediatest\common\

 

Parameters

Parameter name Parameter description
WDKDeviceID Device ID string
LLU_NetAccessOnly Name of machine's LLU for copying files