WSALookupServiceNextA function

The WSALookupServiceNext function is called after obtaining a handle from a previous call to WSALookupServiceBegin in order to retrieve the requested service information.

The provider will pass back a WSAQUERYSET structure in the lpqsResults buffer. The client should continue to call this function until it returns WSA_E_NO_MORE, indicating that all of WSAQUERYSET has been returned.

Syntax

INT WSAAPI WSALookupServiceNextA(
  HANDLE         hLookup,
  DWORD          dwControlFlags,
  LPDWORD        lpdwBufferLength,
  LPWSAQUERYSETA lpqsResults
);

Parameters

hLookup

A handle returned from the previous call to WSALookupServiceBegin.

dwControlFlags

A set of flags that controls the operation. The values passed in the dwControlFlags parameter to the WSALookupServiceBeginfunction determine the possible criteria. Any values passed in the dwControlFlags parameter to the WSALookupServiceNext function further restrict the criteria for the service lookup.

Currently, LUP_FLUSHPREVIOUS is defined as a means to cope with a result set that is too large. If an application does not (or cannot) supply a large enough buffer, setting LUP_FLUSHPREVIOUS instructs the provider to discard the last result set—which was too large—and move on to the next set for this call.

Supported values for the dwControlFlags parameter are defined in the Winsock2.h header file and can be a combination of the following options.

Flag Meaning
LUP_DEEP
0x0001
Queries deep as opposed to just the first level.
LUP_CONTAINERS
0x0002
Returns containers only.
LUP_NOCONTAINERS
0x0004
Do not return containers.
LUP_NEAREST
0x0008
If possible, returns results in the order of distance. The measure of distance is provider specific.
LUP_RETURN_NAME
0x0010
Retrieves the name as lpszServiceInstanceName.
LUP_RETURN_TYPE
0x0020
Retrieves the type as lpServiceClassId.
LUP_RETURN_VERSION
0x0040
Retrieves the version as lpVersion.
LUP_RETURN_COMMENT
0x0080
Retrieves the comment as lpszComment.
LUP_RETURN_ADDR
0x0100
Retrieves the addresses as lpcsaBuffer.
LUP_RETURN_BLOB
0x0200
Retrieves the private data as lpBlob.
LUP_RETURN_ALIASES
0x0400
Any available alias information is to be returned in successive calls to WSALookupServiceNext, and each alias returned will have the RESULT_IS_ALIAS flag set.
LUP_RETURN_QUERY_STRING
0x0800
Retrieves the query string used for the request.
LUP_RETURN_ALL
0x0FF0
A set of flags that retrieves all of the LUP_RETURN_* values.
LUP_FLUSHPREVIOUS
0x1000
Used as a value for the dwControlFlags parameter in WSALookupServiceNext. Setting this flag instructs the provider to discard the last result set, which was too large for the specified buffer, and move on to the next result set.
LUP_FLUSHCACHE
0x2000
If the provider has been caching information, ignores the cache, and queries the namespace itself.
LUP_RES_SERVICE
0x8000
This indicates whether prime response is in the remote or local part of CSADDR_INFO structure. The other part needs to be usable in either case.

lpdwBufferLength

On input, the number of bytes contained in the buffer pointed to by lpqsResults. On output, if the function fails and the error is WSAEFAULT, then it contains the minimum number of bytes to pass for the lpqsResults to retrieve the record.

lpqsResults

A pointer to a block of memory, which will contain one result set in a WSAQUERYSET structure on return.

Return Value

The return value is zero if the operation was successful. Otherwise, the value SOCKET_ERROR is returned, and a specific error number can be retrieved by calling WSAGetLastError.

Error code Meaning
WSA_E_CANCELLED
A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled. The data in the lpqsResults buffer is undefined. In Windows Sockets version 2, conflicting error codes are defined for WSAECANCELLED (10103) and WSA_E_CANCELLED (10111). The error code WSAECANCELLED will be removed in a future version and only WSA_E_CANCELLED will remain. For Windows Sockets version 2, however, applications should check for both WSAECANCELLED and WSA_E_CANCELLED for the widest possible compatibility with namespace providers that use either one.
WSA_E_NO_MORE
There is no more data available. In Windows Sockets version 2, conflicting error codes are defined for WSAENOMORE (10102) and WSA_E_NO_MORE (10110). The error code WSAENOMORE will be removed in a future version and only WSA_E_NO_MORE will remain. For Windows Sockets version 2, however, applications should check for both WSAENOMORE and WSA_E_NO_MORE for the widest possible compatibility with name-space providers that use either one.
WSAEFAULT
The lpqsResults buffer was too small to contain a WSAQUERYSET set.
WSAEINVAL
One or more required parameters were invalid or missing.
WSA_INVALID_HANDLE
The specified Lookup handle is invalid.
WSANOTINITIALISED
The WS2_32.DLL has not been initialized. The application must first call WSAStartup before calling any Windows Sockets functions.
WSANO_DATA
The name was found in the database, but no data matching the given restrictions was located.
WSA_NOT_ENOUGH_MEMORY
There was insufficient memory to perform the operation.

Remarks

The dwControlFlags parameter specified in this function and the ones specified at the time of WSALookupServiceBegin are treated as restrictions for the purpose of combination. The restrictions are combined between the ones at WSALookupServiceBegin time and the ones at WSALookupServiceNext time. Therefore the flags at WSALookupServiceNext can never increase the amount of data returned beyond what was requested at WSALookupServiceBegin, although it is not an error to specify more or fewer flags. The flags specified at a given WSALookupServiceNext apply only to that call.

The dwControlFlags LUP_FLUSHPREVIOUS and LUP_RES_SERVICE are exceptions to the combined restrictions rule (because they are behavior flags instead of restriction flags). If either of these flags are used in WSALookupServiceNext they have their defined effect regardless of the setting of the same flags at WSALookupServiceBegin.

For example, if LUP_RETURN_VERSION is specified at WSALookupServiceBegin the service provider retrieves records including the version. If LUP_RETURN_VERSION is NOT specified at WSALookupServiceNext, the returned information does not include the version, even though it was available. No error is generated.

Also for example, if LUP_RETURN_BLOB is NOT specified at WSALookupServiceBegin but is specified at WSALookupServiceNext, the returned information does not include the private data. No error is generated.

If the WSALookupServiceNext function fails with an error of WSAEFAULT, this indicates that the buffer pointed to by the lpqsResults parameter was too small to contain the query results. A new buffer for a WSAQUERYSET should be provided with a size specified by the value pointed to by the lpdwBufferLength parameter. This new buffer for the WSAQUERYSET needs to have some of the members of the WSAQUERYSET specified before calling the WSALookupServiceNext function again. At a minimum, the dwSize member of the WSAQUERYSET must be set to the new size of the buffer.

Query Results

The following table describes how the query results are represented in the WSAQUERYSET structure.
WSAQUERYSET member Result interpretation
dwSize Will be set to sizeof( WSAQUERYSET). This is used as a versioning mechanism.
dwOutputFlags RESULT_IS_ALIAS flag indicates this is an alias result.
lpszServiceInstanceName Referenced string contains service name.
lpServiceClassId The GUID corresponding to the service class.
lpVersion References version number of the particular service instance.
lpszComment Optional comment string specified by service instance.
dwNameSpace Namespace in which the service instance was found.
lpNSProviderId Identifies the specific namespace provider that supplied this query result.
lpszContext Specifies the context point in a hierarchical namespace at which the service is located.
dwNumberOfProtocols Undefined for results.
lpafpProtocols Undefined for results, all needed protocol information is in the CSADDR_INFO structures.
lpszQueryString When dwControlFlags includes LUP_RETURN_QUERY_STRING, this parameter returns the unparsed remainder of the lpszServiceInstanceName specified in the original query. For example, in a namespace that identifies services by hierarchical names that specify a host name and a file path within that host, the address returned might be the host address and the unparsed remainder might be the file path. If the lpszServiceInstanceName is fully parsed and LUP_RETURN_QUERY_STRING is used, this parameter is NULL or points to a zero-length string.
dwNumberOfCsAddrs Indicates the number of elements in the array of CSADDR_INFO structures.
lpcsaBuffer A pointer to an array of CSADDR_INFO structures, with one complete transport address contained within each element.
lpBlob (Optional) This is a pointer to a provider-specific entity.
 

Windows Phone 8: The WSALookupServiceNextW function is supported for Windows Phone Store apps on Windows Phone 8 and later.

Windows 8.1 and Windows Server 2012 R2: The WSALookupServiceNextW function is supported for Windows Store apps on Windows 8.1, Windows Server 2012 R2, and later.

Requirements

   
Minimum supported client Windows 8.1, Windows Vista [desktop apps | UWP apps]
Minimum supported server Windows Server 2003 [desktop apps | UWP apps]
Target Platform Windows
Header winsock2.h
Library Ws2_32.lib
DLL Ws2_32.dll

See Also

Bluetooth and WSALookupServiceNext

WSALookupServiceBegin

WSALookupServiceEnd

WSAQUERYSET

Winsock Functions

Winsock Reference