COM Error Codes (STG, RPC)

The following table provides a list of error codes used by COM-based APIs.

If you are experiencing difficulty with an application you are installing or running, contact customer support for the software that is displaying the error message. To obtain support for a Microsoft product, go to https://support.microsoft.com.

Constant/value Description
STG_E_INVALIDFUNCTION
0x80030001
Unable to perform requested operation.
STG_E_FILENOTFOUND
0x80030002
could not be found.
STG_E_PATHNOTFOUND
0x80030003
The path %1 could not be found.
STG_E_TOOMANYOPENFILES
0x80030004
There are insufficient resources to open another file.
STG_E_ACCESSDENIED
0x80030005
Access Denied.
STG_E_INVALIDHANDLE
0x80030006
Attempted an operation on an invalid object.
STG_E_INSUFFICIENTMEMORY
0x80030008
There is insufficient memory available to complete operation.
STG_E_INVALIDPOINTER
0x80030009
Invalid pointer error.
STG_E_NOMOREFILES
0x80030012
There are no more entries to return.
STG_E_DISKISWRITEPROTECTED
0x80030013
Disk is write-protected.
STG_E_SEEKERROR
0x80030019
An error occurred during a seek operation.
STG_E_WRITEFAULT
0x8003001D
A disk error occurred during a write operation.
STG_E_READFAULT
0x8003001E
A disk error occurred during a read operation.
STG_E_SHAREVIOLATION
0x80030020
A share violation has occurred.
STG_E_LOCKVIOLATION
0x80030021
A lock violation has occurred.
STG_E_FILEALREADYEXISTS
0x80030050
already exists.
STG_E_INVALIDPARAMETER
0x80030057
Invalid parameter error.
STG_E_MEDIUMFULL
0x80030070
There is insufficient disk space to complete operation.
STG_E_PROPSETMISMATCHED
0x800300F0
Illegal write of non-simple property to simple property set.
STG_E_ABNORMALAPIEXIT
0x800300FA
An API call exited abnormally.
STG_E_INVALIDHEADER
0x800300FB
The file %1 is not a valid compound file.
STG_E_INVALIDNAME
0x800300FC
The name %1 is not valid.
STG_E_UNKNOWN
0x800300FD
An unexpected error occurred.
STG_E_UNIMPLEMENTEDFUNCTION
0x800300FE
That function is not implemented.
STG_E_INVALIDFLAG
0x800300FF
Invalid flag error.
STG_E_INUSE
0x80030100
Attempted to use an object that is busy.
STG_E_NOTCURRENT
0x80030101
The storage has been changed since the last commit.
STG_E_REVERTED
0x80030102
Attempted to use an object that has ceased to exist.
STG_E_CANTSAVE
0x80030103
Can't save.
STG_E_OLDFORMAT
0x80030104
The compound file %1 was produced with an incompatible version of storage.
STG_E_OLDDLL
0x80030105
The compound file %1 was produced with a newer version of storage.
STG_E_SHAREREQUIRED
0x80030106
Share.exe or equivalent is required for operation.
STG_E_NOTFILEBASEDSTORAGE
0x80030107
Illegal operation called on non-file based storage.
STG_E_EXTANTMARSHALLINGS
0x80030108
Illegal operation called on object with extant marshallings.
STG_E_DOCFILECORRUPT
0x80030109
The docfile has been corrupted.
STG_E_BADBASEADDRESS
0x80030110
OLE32.DLL has been loaded at the wrong address.
STG_E_DOCFILETOOLARGE
0x80030111
The compound file is too large for the current implementation
STG_E_NOTSIMPLEFORMAT
0x80030112
The compound file was not created with the STGM_SIMPLE flag
STG_E_INCOMPLETE
0x80030201
The file download was aborted abnormally. The file is incomplete.
STG_E_TERMINATED
0x80030202
The file download has been terminated.
STG_S_CONVERTED
0x00030200
The underlying file was converted to compound file format.
STG_S_BLOCK
0x00030201
The storage operation should block until more data is available.
STG_S_RETRYNOW
0x00030202
The storage operation should retry immediately.
STG_S_MONITORING
0x00030203
The notified event sink will not influence the storage operation.
STG_S_MULTIPLEOPENS
0x00030204
Multiple opens prevent consolidated. (commit succeeded).
STG_S_CONSOLIDATIONFAILED
0x00030205
Consolidation of the storage file failed. (commit succeeded).
STG_S_CANNOTCONSOLIDATE
0x00030206
Consolidation of the storage file is inappropriate. (commit succeeded).
STG_E_STATUS_COPY_PROTECTION_FAILURE
0x80030305
Generic Copy Protection Error.
STG_E_CSS_AUTHENTICATION_FAILURE
0x80030306
Copy Protection Error - DVD CSS Authentication failed.
STG_E_CSS_KEY_NOT_PRESENT
0x80030307
Copy Protection Error - The given sector does not have a valid CSS key.
STG_E_CSS_KEY_NOT_ESTABLISHED
0x80030308
Copy Protection Error - DVD session key not established.
STG_E_CSS_SCRAMBLED_SECTOR
0x80030309
Copy Protection Error - The read failed because the sector is encrypted.
STG_E_CSS_REGION_MISMATCH
0x8003030A
Copy Protection Error - The current DVD's region does not correspond to the region setting of the drive.
STG_E_RESETS_EXHAUSTED
0x8003030B
Copy Protection Error - The drive's region setting may be permanent or the number of user resets has been exhausted.
RPC_E_CALL_REJECTED
0x80010001
Call was rejected by callee.
RPC_E_CALL_CANCELED
0x80010002
Call was canceled by the message filter.
RPC_E_CANTPOST_INSENDCALL
0x80010003
The caller is dispatching an intertask SendMessage call and cannot call out via PostMessage.
RPC_E_CANTCALLOUT_INASYNCCALL
0x80010004
The caller is dispatching an asynchronous call and cannot make an outgoing call on behalf of this call.
RPC_E_CANTCALLOUT_INEXTERNALCALL
0x80010005
It is illegal to call out while inside message filter.
RPC_E_CONNECTION_TERMINATED
0x80010006
The connection terminated or is in a bogus state and cannot be used any more. Other connections are still valid.
RPC_E_SERVER_DIED
0x80010007
The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed.
RPC_E_CLIENT_DIED
0x80010008
The caller (client) disappeared while the callee (server) was processing a call.
RPC_E_INVALID_DATAPACKET
0x80010009
The data packet with the marshalled parameter data is incorrect.
RPC_E_CANTTRANSMIT_CALL
0x8001000A
The call was not transmitted properly; the message queue was full and was not emptied after yielding.
RPC_E_CLIENT_CANTMARSHAL_DATA
0x8001000B
The client (caller) cannot marshal the parameter data - low memory, etc.
RPC_E_CLIENT_CANTUNMARSHAL_DATA
0x8001000C
The client (caller) cannot unmarshal the return data - low memory, etc.
RPC_E_SERVER_CANTMARSHAL_DATA
0x8001000D
The server (callee) cannot marshal the return data - low memory, etc.
RPC_E_SERVER_CANTUNMARSHAL_DATA
0x8001000E
The server (callee) cannot unmarshal the parameter data - low memory, etc.
RPC_E_INVALID_DATA
0x8001000F
Received data is invalid; could be server or client data.
RPC_E_INVALID_PARAMETER
0x80010010
A particular parameter is invalid and cannot be (un)marshalled.
RPC_E_CANTCALLOUT_AGAIN
0x80010011
There is no second outgoing call on same channel in DDE conversation.
RPC_E_SERVER_DIED_DNE
0x80010012
The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call did not execute.
RPC_E_SYS_CALL_FAILED
0x80010100
System call failed.
RPC_E_OUT_OF_RESOURCES
0x80010101
Could not allocate some required resource (memory, events, ...)
RPC_E_ATTEMPTED_MULTITHREAD
0x80010102
Attempted to make calls on more than one thread in single threaded mode.
RPC_E_NOT_REGISTERED
0x80010103
The requested interface is not registered on the server object.
RPC_E_FAULT
0x80010104
RPC could not call the server or could not return the results of calling the server.
RPC_E_SERVERFAULT
0x80010105
The server threw an exception.
RPC_E_CHANGED_MODE
0x80010106
Cannot change thread mode after it is set.
RPC_E_INVALIDMETHOD
0x80010107
The method called does not exist on the server.
RPC_E_DISCONNECTED
0x80010108
The object invoked has disconnected from its clients.
RPC_E_RETRY
0x80010109
The object invoked chose not to process the call now. Try again later.
RPC_E_SERVERCALL_RETRYLATER
0x8001010A
The message filter indicated that the application is busy.
RPC_E_SERVERCALL_REJECTED
0x8001010B
The message filter rejected the call.
RPC_E_INVALID_CALLDATA
0x8001010C
A call control interfaces was called with invalid data.
RPC_E_CANTCALLOUT_ININPUTSYNCCALL
0x8001010D
An outgoing call cannot be made since the application is dispatching an input-synchronous call.
RPC_E_WRONG_THREAD
0x8001010E
The application called an interface that was marshalled for a different thread.
RPC_E_THREAD_NOT_INIT
0x8001010F
CoInitialize has not been called on the current thread.
RPC_E_VERSION_MISMATCH
0x80010110
The version of OLE on the client and server machines does not match.
RPC_E_INVALID_HEADER
0x80010111
OLE received a packet with an invalid header.
RPC_E_INVALID_EXTENSION
0x80010112
OLE received a packet with an invalid extension.
RPC_E_INVALID_IPID
0x80010113
The requested object or interface does not exist.
RPC_E_INVALID_OBJECT
0x80010114
The requested object does not exist.
RPC_S_CALLPENDING
0x80010115
OLE has sent a request and is waiting for a reply.
RPC_S_WAITONTIMER
0x80010116
OLE is waiting before retrying a request.
RPC_E_CALL_COMPLETE
0x80010117
Call context cannot be accessed after call completed.
RPC_E_UNSECURE_CALL
0x80010118
Impersonate on unsecure calls is not supported.
RPC_E_TOO_LATE
0x80010119
Security must be initialized before any interfaces are marshalled or unmarshalled. It cannot be changed once initialized.
RPC_E_NO_GOOD_SECURITY_PACKAGES
0x8001011A
No security packages are installed on this machine or the user is not logged on or there are no compatible security packages between the client and server.
RPC_E_ACCESS_DENIED
0x8001011B
Access is denied.
RPC_E_REMOTE_DISABLED
0x8001011C
Remote calls are not allowed for this process.
RPC_E_INVALID_OBJREF
0x8001011D
The marshaled interface data packet (OBJREF) has an invalid or unknown format.
RPC_E_NO_CONTEXT
0x8001011E
No context is associated with this call. This happens for some custom marshalled calls and on the client side of the call.
RPC_E_TIMEOUT
0x8001011F
This operation returned because the timeout period expired.
RPC_E_NO_SYNC
0x80010120
There are no synchronize objects to wait on.
RPC_E_FULLSIC_REQUIRED
0x80010121
Full subject issuer chain SSL principal name expected from the server.
RPC_E_INVALID_STD_NAME
0x80010122
Principal name is not a valid MSSTD name.
CO_E_FAILEDTOIMPERSONATE
0x80010123
Unable to impersonate DCOM client
CO_E_FAILEDTOGETSECCTX
0x80010124
Unable to obtain server's security context
CO_E_FAILEDTOOPENTHREADTOKEN
0x80010125
Unable to open the access token of the current thread
CO_E_FAILEDTOGETTOKENINFO
0x80010126
Unable to obtain user info from an access token
CO_E_TRUSTEEDOESNTMATCHCLIENT
0x80010127
The client who called IAccessControl::IsAccessPermitted was not the trustee provided to the method
CO_E_FAILEDTOQUERYCLIENTBLANKET
0x80010128
Unable to obtain the client's security blanket
CO_E_FAILEDTOSETDACL
0x80010129
Unable to set a discretionary ACL into a security descriptor
CO_E_ACCESSCHECKFAILED
0x8001012A
The system function, AccessCheck, returned false
CO_E_NETACCESSAPIFAILED
0x8001012B
Either NetAccessDel or NetAccessAdd returned an error code.
CO_E_WRONGTRUSTEENAMESYNTAX
0x8001012C
One of the trustee strings provided by the user did not conform to the \ syntax and it was not the "*" string
CO_E_INVALIDSID
0x8001012D
One of the security identifiers provided by the user was invalid
CO_E_CONVERSIONFAILED
0x8001012E
Unable to convert a wide character trustee string to a multibyte trustee string
CO_E_NOMATCHINGSIDFOUND
0x8001012F
Unable to find a security identifier that corresponds to a trustee string provided by the user
CO_E_LOOKUPACCSIDFAILED
0x80010130
The system function, LookupAccountSID, failed
CO_E_NOMATCHINGNAMEFOUND
0x80010131
Unable to find a trustee name that corresponds to a security identifier provided by the user
CO_E_LOOKUPACCNAMEFAILED
0x80010132
The system function, LookupAccountName, failed
CO_E_SETSERLHNDLFAILED
0x80010133
Unable to set or reset a serialization handle
CO_E_FAILEDTOGETWINDIR
0x80010134
Unable to obtain the Windows directory
CO_E_PATHTOOLONG
0x80010135
Path too long
CO_E_FAILEDTOGENUUID
0x80010136
Unable to generate a uuid.
CO_E_FAILEDTOCREATEFILE
0x80010137
Unable to create file
CO_E_FAILEDTOCLOSEHANDLE
0x80010138
Unable to close a serialization handle or a file handle.
CO_E_EXCEEDSYSACLLIMIT
0x80010139
The number of ACEs in an ACL exceeds the system limit.
CO_E_ACESINWRONGORDER
0x8001013A
Not all the DENY_ACCESS ACEs are arranged in front of the GRANT_ACCESS ACEs in the stream.
CO_E_INCOMPATIBLESTREAMVERSION
0x8001013B
The version of ACL format in the stream is not supported by this implementation of IAccessControl
CO_E_FAILEDTOOPENPROCESSTOKEN
0x8001013C
Unable to open the access token of the server process
CO_E_DECODEFAILED
0x8001013D
Unable to decode the ACL in the stream provided by the user
CO_E_ACNOTINITIALIZED
0x8001013F
The COM IAccessControl object is not initialized
CO_E_CANCEL_DISABLED
0x80010140
Call Cancellation is disabled
RPC_E_UNEXPECTED
0x8001FFFF
An internal error occurred.

Requirements

Header
Winerror.h

See also

COM Error Codes